Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Topological phases”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Neutron sub-micrometre tomography from scattering data

Neutrons are valuable probes for various material samples across many areas of research. Neutron imaging typically has a spatial resolution of larger than 20 µm, whereas neutron scattering is sensitive to smaller features but does not provide a real-space image of the sample. A computed-tomography technique is demonstrated that uses neutron-scattering data to generate an image of a periodic sample with a spatial resolution of ∼300 nm. The achieved resolution is over an order of magnitude smaller than the resolution of other forms of neutron tomography. This method consists of measuring neutron diffraction using a double-crystal diffractometer as a function of sample rotation and then using a phase-retrieval algorithm followed by tomographic reconstruction to generate a map of the sample's scattering-length density. Topological features found in the reconstructions are confirmed with scanning electron micrographs. This technique should be applicable to any sample that generates clear neutron-diffraction patterns, including nanofabricated samples, biological membranes and magnetic materials, such as skyrmion lattices.

nanoscience↗
DOE OSTI2025

Correlation between complex spin textures and the magnetocaloric and Hall effects in Eu⁢(Ga 1−𝑥 ⁢Al 𝑥 ) 4 (𝑥=0.9, 1)

Determining the electronic phase diagram of a quantum material as a function of temperature (𝑇) and applied magnetic field (𝐻) forms the basis for understanding the microscopic origin of transport properties, such as the anomalous Hall effect (AHE) and topological Hall effect (THE). For many magnetic quantum materials, including Eu⁢Al 4 , a THE arises from a topologically protected magnetic skyrmion lattice with a nonzero scalar spin chirality. We identified a square skyrmion lattice (sSkL) peak in Eu⁢(Ga 1−𝑥 ⁢Al 𝑥 ) 4 (𝑥=0.9) identical to the peak previously observed in Eu⁢Al 4 by performing neutron-scattering measurements throughout the phase diagram. Here, comparing these neutron results with transport measurements, we found that in both compounds the maximal THE does not correspond to the sSkL area. Instead of the maximal THE, the maximal magnetocaloric-effect boundaries better identify the sSkL lattice phase observed by neutron-scattering measurements. The maximal THE therefore arises from interactions of itinerant electrons with frustrated spin fluctuations in a topologically trivial magnetic state.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

The phase of the gravitational path integral

The gravitational path integral on S 2 × S 2 can be interpreted either as evaluating a contribution to the norm of the Hartle-Hawking wavefunction conditional on spatial S 1 × S 2 topology, or the pair creation rate of black holes in de Sitter. Both interpretations are distinguished at the quantum level. The former requires the path integral to be real and the latter to be imaginary. We develop a formalism to efficiently compute the phase of the gravitational path integral on Einstein spaces. We apply it to a broad class of spacetimes and in particular S 2 × S D−2 , finding it to be real and positive. We generalize some of the analysis to cases with charge and rotation.

AdS-CFT correspondence↗
DOE OSTI2024

Spin-resolved topology and partial axion angles in three-dimensional insulators

Abstract Symmetry-protected topological crystalline insulators (TCIs) have primarily been characterized by their gapless boundary states. However, in time-reversal- ( $${{{{{{{\mathcal{T}}}}}}}}$$ T -) invariant (helical) 3D TCIs—termed higher-order TCIs (HOTIs)—the boundary signatures can manifest as a sample-dependent network of 1D hinge states. We here introduce nested spin-resolved Wilson loops and layer constructions as tools to characterize the intrinsic bulk topological properties of spinful 3D insulators. We discover that helical HOTIs realize one of three spin-resolved phases with distinct responses that are quantitatively robust to large deformations of the bulk spin-orbital texture: 3D quantum spin Hall insulators (QSHIs), “spin-Weyl” semimetals, and $${{{{{{{\mathcal{T}}}}}}}}$$ T -doubled axion insulator (T-DAXI) states with nontrivial partial axion angles indicative of a 3D spin-magnetoelectric bulk response and half-quantized 2D TI surface states originating from a partial parity anomaly. Using ab-initio calculations, we demonstrate that β -MoTe 2 realizes a spin-Weyl state and that α -BiBr hosts both 3D QSHI and T-DAXI regimes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Large Anomalous and Topological Hall Effect and Nernst Effect in a Dirac Kagome Magnet Fe 3 Ge

Searching for Kagome magnets with novel magnetic and electronic properties has been attracting significant efforts recently. Here, the magnetic, electronic, and thermoelectric properties of Fe 3 Ge single crystals with Fe atoms forming a slightly distorted Kagome lattice are reported. It is shown that Fe 3 Ge exhibits a large anomalous Hall effect and anomalous Nernst effect. The observed anomalous transverse thermoelectric conductivity $|α^A_{xz}|$ reaches ≈4.6 A m −1 K −1 , which is larger than the conventional ferromagnets and most of the topological ferromagnets reported in literature. The first-principles calculations suggest that these exceptional transport properties are dominated by the intrinsic mechanism, which highlights the significant contribution of the Berry curvature of massive Dirac gaps in the momentum space. Additionally, a topological Hall resistivity of 0.9 µΩ cm and a topological Nernst coefficient of 1.2 µV K −1 are also observed, which are presumably ascribed to the Berry phase associated with the field-induced non-zero scalar spin chirality. These features highlight the synergic effects of the Berry phases in both momentum space and real space of Fe 3 Ge, which render it an excellent candidate for room-temperature thermoelectric applications based on transverse transport.

Kagome magnet↗
DOE OSTI2024

Machine-learning-assisted deciphering of microstructural effects on ionic transport in composite materials: A case study of Li 7 La 3 Zr 2 O 12 -LiCoO 2

The effective diffusivity of ionic species in multiphase materials is critical for the design and function of composite materials for electrochemical energy storage. In practice, effective diffusivity depends sensitively not only on the intrinsic diffusivities of constituting materials but also on their topological arrangement; nevertheless, these coupled contributions are oversimplified in most analytical models. Here, we combine atomistically informed mesoscale modeling and machine learning (ML) analysis to unravel how such features affect effective diffusivity in two-phase composites. Using the Li 7 La 3 Zr 2 O 12 -LiCoO 2 composite solid-state battery cathode as a model system, we compute effective diffusivity for 600 distinct dense polycrystalline microstructures with different topological configurations of grains, grain boundaries, and heterointerfaces. We verify that in addition to atomic-scale variabilities, microstructural feature diversity can significantly impact effective transport properties. Across the ensemble of test microstructures, this often results in bimodal distributions of effective diffusivity that encompass two qualitatively distinct operating mechanisms, which we identify via flux analysis. An ML approach reveals that the most critical determining factors for effective diffusivity are the connectivity of bulk phases and their heterointerfaces. The role of ionic mobility at the heterointerfaces is also discussed. These insights highlight the combined importance of microstructure and interface engineering in tuning the transport properties of ionic species in composite materials. In conclusion, our framework can also be extended for understanding generic microstructure-property relationships in other complex multiphase materials.

25 ENERGY STORAGE↗
DOE OSTI2020

Spontaneous Hall effect enhanced by local Ir moments in epitaxial Pr 2 Ir 2 O 7 thin films

Rare-earth pyrochlore iridates ( RE 2 Ir 2 O 7 ) consist of two interpenetrating cation sublattices, the RE with highly frustrated magnetic moments, and the iridium with extended conduction orbitals significantly mixed by spin-orbit interactions. The coexistence and coupling of these two sublattices create a landscape for discovery and manipulation of quantum phenomena such as the topological Hall effect, massless conduction bands, and quantum criticality. Thin films allow extended control of the material system via symmetry-lowering effects such as strain. While bulk Pr 2 Ir 2 O 7 shows a spontaneous hysteretic Hall effect below 1.5 K, we observe the effect at elevated temperatures up to 15 K in epitaxial thin films on (111) yttria-stabilized zirconia (YSZ) substrates synthesized via solid-phase epitaxy. Similar to the bulk, the lack of observable long-range magnetic order in the thin films points to a topological origin. We use synchrotron-based element-specific x-ray diffraction and x-ray magnetic circular dichroism to compare powders and thin films to attribute the spontaneous Hall effect in the films to localization of the Ir moments. Further, we link the thin-film Ir local moments to lattice distortions absent in the bulklike powders. We conclude that the elevated-temperature spontaneous Hall effect is caused by the topological effect originating either from the Ir or Pr sublattice, with interaction strength enhanced by the Ir local moments. This spontaneous Hall effect with weak net moment highlights the effect of vanishingly small lattice distortions as a means to discover topological phenomena in metallic frustrated magnetic materials.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Exploring the phase diagram of 3D artificial spin-ice

Artificial spin-ices consist of lithographic arrays of single-domain magnetic nanowires organised into frustrated lattices. These geometries are usually two-dimensional, allowing a direct exploration of physics associated with frustration, topology and emergence. Recently, three-dimensional geometries have been realised, in which transport of emergent monopoles can be directly visualised upon the surface. Here we carry out an exploration of the three-dimensional artificial spin-ice phase diagram, whereby dipoles are placed within a diamond-bond lattice geometry. We find a rich phase diagram, consisting of a double-charged monopole crystal, a single-charged monopole crystal and conventional spin-ice with pinch points associated with a Coulomb phase. In experimental demagnetised systems, broken symmetry forces formation of ferromagnetic stripes upon the surface, forbidding the lower energy double-charged monopole crystal. Instead, we observe crystallites of single magnetic charge, superimposed upon an ice background. The crystallites are found to form due to the distribution of magnetic charge around the 3D vertex, which locally favours monopole formation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Shaping Symmetry and Molding Morphology of Triply-Periodic Network Assemblies via Molecular Design and Processing of Block Copolymers

This project aimed to uncover molecular design rules for block copolymer (BCP) assemblies of triply-periodic network (TPN) phases, which are highly sought after, yet elusive, nanostructures for many functional material applications that rely on their combination of symmetry and polycontinuous domain connectivity [R1, R2], such as topological-photonics, supercapacitors and ultrafiltration media. While they have been a target of “bottom up” approaches to nanostructured, hybrid materials, the ability to manipulate the tubular network morphology of TPN assemblies beyond the cubic double-gyroid (DG) phase has advanced relatively little.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Dual quantum spin Hall insulator by density-tuned correlations in TaIrTe 4

The convergence of topology and correlations represents a highly coveted realm in the pursuit of new quantum states of matter. Introducing electron correlations to a quantum spin Hall (QSH) insulator can lead to the emergence of a fractional topological insulator and other exotic time-reversal-symmetric topological order, not possible in quantum Hall and Chern insulator systems. Here, in this study, we report a new dual QSH insulator within the intrinsic monolayer crystal of TaIrTe 4 , arising from the interplay of its single-particle topology and density-tuned electron correlations. At charge neutrality, monolayer TaIrTe 4 demonstrates the QSH insulator, manifesting enhanced nonlocal transport and quantized helical edge conductance. After introducing electrons from charge neutrality, TaIrTe 4 shows metallic behaviour in only a small range of charge densities but quickly goes into a new insulating state, entirely unexpected on the basis of the single-particle band structure of TaIrTe 4 . This insulating state could arise from a strong electronic instability near the van Hove singularities, probably leading to a charge density wave (CDW). Remarkably, within this correlated insulating gap, we observe a resurgence of the QSH state. The observation of helical edge conduction in a CDW gap could bridge spin physics and charge orders. The discovery of a dual QSH insulator introduces a new method for creating topological flat minibands through CDW superlattices, which offer a promising platform for exploring time-reversal-symmetric fractional phases and electromagnetism.

electronic devices↗
DOE OSTI2024

Unconventional fieldlike spin torques in CrPt 3

The topological semimetal CrPt 3 has potential for generating unconventional spin torques due to its ferrimagnetic ordering, topological band structure, and high anomalous Hall effect. CrPt 3 exhibits ferrimagnetic behavior only in its chemically ordered phase and is paramagnetic in its chemically disordered phase. By controlling the growth and annealing temperatures, we prepare epitaxial films of both chemically ordered and chemically disordered phases of CrPt 3 , allowing us to investigate the effect of magnetic ordering on unconventional-torque generation. We use angle-dependent spin-torque-ferromagnetic-resonance and second-harmonic Hall measurements to probe the spin torques generated from epitaxial CrPt 3 in CrPt 3 /Cu/Ni 81 ⁢Fe 19 heterostructures. With current applied along specific directions with respect to the crystal order, we reveal unconventional spin torques in both ordered and disordered films. When current flows parallel to the [$1\bar{1}1$] and [ $\bar{1}11$] directions, we observe an unconventional fieldlike torque that is opposite in sign for the two directions. Finally, our calculations reveal that this unconventional torque originates from an indirect nonlocal spin-orbit torque due to spin scattering at the CrPt 3 /Cu interface, in addition to symmetry breaking at this interface.

ferromagnetic resonance↗
DOE OSTI2019

Design and Validation of A 250-kW All-Silicon Carbide High-Density Three-Level T-Type Inverter

Our article introduces a comprehensive design and validation of a compact all-silicon carbide (SiC) 250-kW T-type traction inverter with a power density of 25 kW/l and 98.5% peak efficiency. All the operation modes and switching transitions in a T-type phase leg are analyzed to model the semiconductor power losses over a fundamental cycle. Special attention has been paid to explore the behavior and losses due to the reverse conduction of the SiC MOSFETs. Then a loss model is built based upon this analysis to calculate the device loss distribution and system efficiency, which is further used to determine the optimal switching frequency. In addition, detailed inverter system design and prototyping procedure, including the selection of SiC modules and dc-link capacitors, and the optimization of a fourlayer laminated busbar, are presented. In this article, the T-type phase leg is formed by a normal half-bridge module and a common-source module. The switching performance and losses in this configuration are different from two-level topology that only uses one SiC module. Thus, the switching performance and the associated switching energy in each switch position are characterized using a custom clamped inductive load (CIL) test setup designed for a T-type phase leg. The performance of the full power traction inverter prototype has been verified experimentally using pulse testing and continuous power testing.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Inverse Biot–Savart Optimization for Superconducting Accelerator Magnets

Superconducting (SC) magnets for accelerator concepts are often synthesized by numerically optimizing magnetic field waveforms, a process that requires a subsequent solution of a constrained inverse problem to identify suitable SC magnet windings. When the desired field distribution is intuitive, the inverse process is facilitated by seeding preconceived coil distributions into design optimization methods for refinement. With more complex magnetic field distributions, an initial design may be unknown, and topology optimization tools are required to synthesize current distributions without a priori guidance from a subject matter expert. In this work, we develop a constrained inverse Biot-Savart topology optimization methodology that synthesizes optimal distributions of current density in racetrack-like SC coils. The problem structure is exploited through a computationally efficient quadratic programming formulation, and the method is applied to recently published magnetic field waveforms for a recirculating proton phase shifter, a proton therapy gantry, and dipole magnets with sharp field transitions. The method and results herein identify novel winding configurations that can help magnet designers bring accelerator concepts to fruition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

The Toughness of Interlocking Metasurfaces

Interlocking metasurfaces (ILMs) are arrays of autogenous latching unit cells patterned across a surface. These create structural joints similar to bioinspired suture joints but patterned over a 2D surface rather than a 1D seam. This enables ILMs to be an alternative to conventional joining technologies such as bolts, welds, and adhesives. However, compared to conventional joining methods, relatively little is known of the engineering considerations for designing structural ILMs. Herein, the interfacial toughness of an archetypal ILM is examined for the first time. Under the conditions studied here, the ILM is substantially tougher than the material from which it is made, in this case, exhibiting up to a 50% increase in interfacial crack initiation energy over the solid base material, a photocured 3D‐printed polymer. Through experimental tests using in‐situ digital image correlation along with complementary computational analyses, the mechanism of toughening in the ILM structure and the origins of toughness anisotropy are revealed. The increase in toughness is associated with cross‐cell interactions, that is, load‐sharing across unit cells, which give rise to a finite process zone length with different effective material properties. In this way, ILM toughening is analogous to crack blunting in ductile materials or fiber bridging in composites; yet here, the ILM is composed of a single‐phase base material and so the architected toughening is geometric in nature and hence amenable to future topological optimization.

fracture↗
DOE OSTI2020

Microstructure Generation via Generative Adversarial Network for Heterogeneous, Topologically Complex 3D Materials

Using a large-scale, experimentally captured 3D microstructure dataset, we implement the generative adversarial network (GAN) framework to learn and generate 3D microstructures of solid oxide fuel cell electrodes. The generated microstructures are visually, statistically, and topologically realistic, with distributions of microstructural parameters, including volume fraction, particle size, surface area, tortuosity, and triple phase boundary density, being highly similar to those of the original microstructure. These results are compared and contrasted with those from an established, grain-based generation algorithm (DREAM.3D). Importantly, simulations of electrochemical performance, using a locally resolved finite element model, demonstrate that the GAN generated microstructures closely match the performance distribution of the original, while DREAM.3D leads to significant differences. Finally, the ability of the generative machine learning model to recreate microstructures with high fidelity suggests that the essence of complex microstructures may be captured and represented in a compact and manipulatable form.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Frustrated charge density wave and quasi-long-range bond-orientational order in the magnetic kagome FeGe

The intrinsic frustrated nature of a kagome lattice is amenable to the realization of exotic phases of matter, such as quantum spin liquids or spin ices, and the multiple-q charge density waves (CDW) in the kagome metals. Despite intense efforts to understand the mechanism driving the electronic modulations, its origin is still unknown and obscured by competing interactions and intertwined orders. Here, we identify a dimerization-driven 2D hexagonal charge-diffuse precursor in the antiferromagnetic kagome metal FeGe and demonstrate that the fraction of dimerized/undimerized states is the relevant order parameter of the multiple-q CDW of a continuous phase transition. The pretransitional charge fluctuations with propagation vector q = q M at T CDW < T < T*(125 K) are anisotropic, hence holding a quasi-long-range bond-orientational order. The broken translational symmetry emerges from the anisotropic diffuse precursor, akin to the Ising scenario of antiferromagnetic triangular lattices. The temperature and momentum dependence of the critical scattering show parallels to the stacked hexatic B-phases reported in liquid crystals and transient states of CDWs and highlight the key role of the topological defect-mediated melting of the CDW in FeGe.

Subires, D. [Donostia International Physics Center↗
DOE OSTI2022

Dynamical preparation of an atomic condensate in a Hofstadter band

The creation of a Hamiltonian in the quantum regime which has nontrivial topological features is a central goal of the cold-atom community, enabling widespread exploration of novel phases of quantum matter. A general scheme to synthesize such Hamiltonians is based on dynamical modulation of optical lattices which thereby generate vector potentials. At the same time, the modulation can lead to heating and serious difficulties with equilibration. Here we show that these challenges can be overcome by demonstrating how a Hofstadter Bose-Einstein condensate (BEC) can be dynamically realized, using experimental protocols. From Gross-Pitaevskii simulations our study reveals a complex, multistage evolution; this includes a chaotic intermediate "heating" stage followed by a spontaneous reentrance to the BEC. The observed behavior is reminiscent of evolution in cosmological models.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2023

Fierro Version 2.x

FIERRO is a parallel C++ code designed to simulate fluid mechanics, heat transfer, and solid mechanics in two- and three-dimensional space. FIERRO is written to run on homogeneous (CPU) and heterogeneous (CPU+GPU) high performance computing machines. Fierro can aid a) modeling and design efforts that have historically relied on commercial implicit and explicit finite element codes, b) numerical methods research, c) manufacturing research, and d) computer science research. The code contains diverse numerical methods to solve the governing physics equations for both quasi-static and dynamic problems. Mathematical optimization solvers are coupled to the numerical methods to research topology and shape optimization that has application to additive manufacturing, and to create novel numerical approaches. Phase-field methods with micromechanical solvers are provided to simulate microstructure formation and evolution in manufacturing processes. The micromechanical solvers can also help research efforts create continuum-scale constitutive models for solids, as a function of the microstructure, in situ in a calculation or in a stand-alone manner. No physical data exists within the code.

Morgan, Nathaniel↗