Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Switch”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

A new approach to the minimum weight/loss design of switching power converters

A new technique using the mathematical nonlinear programming ALAG is proposed to facilitate design optimizations of switching power converters. This computer-aided approach provides a minimum weight (or loss) design down to the details of component level and concurrently satisfies all related power-circuit performance requirements. It also provides such design insights as tradeoffs between power loss and system weight as the switching frequency is increased.

Lee, F. C.↗
NASA NTRS1981

An efficient procedure for scheduling packets in a multibeam satellite-switched TDMA system

A satellite-switched, multi-beam system using N sub T transponders is considered, in which a large number of ground stations are distributed over N sub Z (not less than N sub T) zones. Each station transmits information digitally in a packet-switched time division multiple access mode, with all packets of fixed length. A demand-assigned packet scheduling procedure is described which achieves high throughput with relatively low average time delay, adapts easily to fluctuating demand from individual earth stations, and automatically schedules transmissions to avoid adjacent zone interference.

Stern, T. E.↗
NASA NTRS1983

High Power Switching Transistor

Improved switching transistors handle 400-A peak currents and up to 1,200 V. Using large diameter silicon wafers with twice effective area as D60T, form basis for D7 family of power switching transistors. Package includes npn wafer, emitter preform, and base-contact insert. Applications are: 25to 50-kilowatt high-frequency dc/dc inverters, VSCF converters, and motor controllers for electrical vehicles.

Hower, P. L.↗
NASA NTRS1984

Improved Two-Phase Switching Regulator

Coupled-inductor polyphase regulator has better efficiency and lower inductor losses. Improved two-phase switching regulator employs negative coupling between inductors to achieve better power-to-weight ratio while reducing peak switching currents and inductor losses. Improvement of about 35 percent using new technique.

Rippel, W. E.↗
NASA NTRS1983

Heat pipe thermal switch

A thermal switch for controlling the dissipation of heat between a body is described. The thermal switch is comprised of a flexible bellows defining an expansible vapor chamber for a working fluid located between an evaporation and condensation chamber. Inside the bellows is located a coiled retaining spring and four axial metal mesh wicks, two of which have their central portions located inside of the spring while the other two have their central portions located between the spring and the side wall of the bellows. The wicks are terminated and are attached to the inner surfaces of the outer end walls of evaporation and condensation chambers respectively located adjacent to the heat source and heat sink. The inner surfaces of the end walls furthermore include grooves to provide flow channels of the working fluid to and from the wick ends. The evaporation and condensation chambers are connected by turnbuckles and tension springs to provide a set point adjustment for setting the gap between an interface plate on the condensation chamber and the heat sink.

Wolf, D. A.↗
NASA NTRS1982

Packet communication system for a multi-beam beam switched satellite repeater

This paper presents the design of a packet-switched communication system using a multi-beam, beam switched satellite repeater. The protocol provides a combination of random access via Slotted ALOHA techniques and demand assigned access using collision requests. This allows efficient bandwidth usage and low average delays. Minimization of earth station cost was a major objective. This was achieved by transferring the bulk of the system complexity to the satellite repeater and the (ground) network controller. This centrally controlled protocol would allow greater system stability and would permit system reconfiguration in response to changes in traffic intensity. Sufficient signalling is also incorporated to allow both rate diversity to combat fading and timing corrections to account for satellite drift.

Bose, S. K.↗
NASA NTRS1985

Automatic Monitoring of Switching Power Supplies

Fast analysis of switching waveforms allows detection of impending failures. Switching power conditioner converts dc power from source such as battery or solar cell array to well regulated dc at convenient voltages and currents. Concept originally developed for space stations and spacecraft also suitable for power conditioning equipment in aircraft and in terrestrial photovoltaic power systems.

Moser, R. L.↗
NASA NTRS1983

Energy stores and switches for rail-launcher systems

An overview of existing switch and power supply technology applicable to space launch, a new candidate pulsed power supply for Earth-to-space rail launcher duty, the inverse railgun flux compressor, and a set of switching experiments to study further the feasibility of Earth-to-space launch are discussed.

Weldon, W. F.↗
NASA NTRS1983

Input filter compensation for switching regulators

A novel input filter compensation scheme for a buck regulator that eliminates the interaction between the input filter output impedance and the regulator control loop is presented. The scheme is implemented using a feedforward loop that senses the input filter state variables and uses this information to modulate the duty cycle signal. The feedforward design process presented is seen to be straightforward and the feedforward easy to implement. Extensive experimental data supported by analytical results show that significant performance improvement is achieved with the use of feedforward in the following performance categories: loop stability, audiosusceptibility, output impedance and transient response. The use of feedforward results in isolating the switching regulator from its power source thus eliminating all interaction between the regulator and equipment upstream. In addition the use of feedforward removes some of the input filter design constraints and makes the input filter design process simpler thus making it possible to optimize the input filter. The concept of feedforward compensation can also be extended to other types of switching regulators.

Kelkar, S. S.↗
NASA NTRS1984

High Speed Crystal Growth by Q-switched Laser Melting

The modification of the structural and electrical properties of semiconductors short radiation pulses obtained from Q-switched lasers is described. These modifications are accomplished by high heating and cooling rates. This processing revealed novel crystal growth and high speed resolidification phenomena. The behavior of semiconductor Si is analyzed. The annealing process typically employs short pulses of radiation in or near the visible region of the spectrum. The Q-switched ruby and Nd-YAG lasers are commonly used and these are sometimes mode locked to reduce the pulse length still further. Material to be annealed can be processed with a single large area radiation spot. Alternatively, a small radiation spot size can be used and a large sample area is covered by overlapping irradiated regions.

Cullis, A. G.↗
NASA NTRS1985

High-Speed Computer-Controlled Switch-Matrix System

High-speed computer-controlled switch-matrix system developed for communication satellites. Satellite system controlled by onboard computer and all message-routing functions between uplink and downlink beams handled by newly developed switch-matrix system. Message requires only 2-microsecond interconnect period, repeated every millisecond.

Spisz, E.↗
NASA NTRS1986

Microwave Power Combiner With Switching Diodes

In multiple-port microwave power combiner, each of outputs of two or more power amplifiers of same frequency and phase passed to common output port separately or together. Each amplifier connected to combiner through switch consisting of resonant structures, radio-frequency chokes, and diode. Switches not only permit flexiblity in selection of amplifiers but isolate unused amplifiers from network, all while operating at relatively low power loss.

Conroy, B. L.↗
NASA NTRS1984

Operational air traffic control requirements for the new Voice Switching and Control System

Final user requirements defined for the Voice Switching and Control System (VSCS) to be implemented for ATC functions as part of the Area Control Facility (ACF) concept for the National Airspace System (NAS) are described. The VSCS will be communications equipment at operational stations, supervisory positions, and support systems, the switching system itself, and interfaces between the VSCS and other systems. Supervisory users will include the Area Manager, Traffic Management Coordinator, a Military Operations Specialists, a Weather Coordinator, a NAS manager, Maintenance, and a flight Data Communications Specialist. The VSCS will supply computerized communications capability within and among ATC centers. Details of the efforts used to define the system requirements are recounted, noting the heavy reliance on recommendations from active ATC personnel.

Leon, N.↗
NASA NTRS1986

Cross-Array Antenna With Switched Steering

Selected phase shifting of feeds to antenna elements aims antenna beam. Antenna for Space Shuttle controlled in two dimensions by double-pole, double-throw switches antenna feeds. Switches control phasing of antenna elements by transposing transmission-line delay elements between feeds to pairs of elements located on opposite sides of antenna. Same principles can be applied to antennas with additional elements along each axis.

Iwasaki, R. S.↗
NASA NTRS1987

Power-Switching Circuit

Functions of circuit breakers, meters, and switches combined. Circuit that includes power field-effect transistors (PFET's) provides on/off switching, soft starting, current monitoring, current tripping, and protection against overcurrent for 30-Vdc power supply at normal load currents up to 2 A. Has no moving parts.

Praver, Gerald A.↗
NASA NTRS1987

High-Voltage Switch Containing (DI)2 Devices

Series switching diodes triggered on by passing above threshold voltage. High-voltage switch made by connecting multitude of deep-impurity, double-injection devices in series with each other and with another, triggerable high-voltage device such as thyristor. Device operates near ground potential to avoid insulation problems in triggering circuit.

Hanes, Maurice H.↗
NASA NTRS1988

Neutron effects on the electrical and switching characteristics of NPN bipolar power transistors

The use of nuclear reactors to generate electrical power for future space missions will require the electrical components used in the power conditioning, control, and transmission subsystem to operate in the associated radiation environments. An initial assessment of neutron irradiation on the electrical and switching characteristics of commercial high power NPN bipolar transistors was investigated. The results clearly show the detrimental effects caused by neutron irradiation on the electrical and switching characteristics of the NPN bipolar power transistor.

Frasca, Albert J.↗