Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Surface science”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Kilopower - Powering the Future of Space Exploration [Poster]

The Kilopower Project was initiated by NASA’s Space Technology Mission Directorate to demonstrate subsystem-level technology readiness of small space fission power in a relevant environment (TRL 5) for space science and human exploration power needs. The Kilopower Project centerpiece is the Kilowatt Reactor Using Stirling Technology (KRUSTY) test, which consists of the development and testing of a ground technology demonstrator of a 1 kWe class fission power system. The technologies to be developed and validated by KRUSTY are extensible to space fission power systems from 1 to 10 kWe, which can enable modular surface fission power systems for human exploration, as well as higher power future potential deep space science missions.

42 ENGINEERING↗
DOE OSTI2019

Thermal Behavior During the Selective Laser Melting Process of Ti-6Al-4V Powder in the Point Exposure Scan Pattern

Currently, there are two main scan patterns, including the continuous exposure scan pattern and the point exposure scan pattern, during the selective laser melting (SLM) process. The point exposure scan pattern allows a three-dimensional (3-D) printer to build finer detail features as a static molten pool that is more stable than a dynamic one. However, there has been limited theoretical research on the thermal behavior characteristics during the process in the point exposure scan pattern. Therefore, in this study, the simulation of thermal behavior during SLM of Ti-6Al-4V powder in the point exposure scan pattern was performed. The temperature evolution behavior of different positions and the effects of exposure time on the temperature evolution behavior of different positions, temperature distributions, and dimensions of the molten pool were investigated. The results showed that the direct exposure position and unexposed position had significantly different temperature evolution behaviors under a given condition, and the changed exposure time had the greatest influence on the direct exposure position compared with unexposed position. Moreover, the thermal accumulation effect of a former exposure point on a later one decreased with increasing exposure time. In addition, with the increase of exposure time, the maximum temperature of the molten pool was enhanced and the surface morphology of the molten pool changed from an approximate ellipse to an approximate circle. Besides, the molten pool dimensions were found to increase with exposure time, which indicated that the exposure time played an important role in the stability of the molten pool and the metallurgical bonding in the process. Furthermore, the dimensions of the molten pool and metallurgical bonding in the cross-sectional view were obtained through experiments. Good agreement was obtained when comparing the simulated results with the experimental ones.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Bulk‐Boundary Correspondence of Semimetal Ru 3 Sn 7 and Topological Surface States on Chemically Realistic Terminations

Ru 3 Sn 7 is experimentally demonstrated as an efficient catalyst, with potential utilization of topological surface states for hydrogen evolution reaction. Despite its promising catalytic performance, the topological nature of Ru 3 Sn 7 remains uncertain. Particularly, the bulk-boundary correspondence has not yet been established, hence hindering a rigorous justification of its topologically-protected surface states. In this work, the bulk topology of Ru 3 Sn 7 is detailed using first-principles calculations and the topological quantum chemistry formalism. Ru3Sn7 turns out to be an enforced semimetal possessing symmetry-protected crossings within a set of bands near the Fermi level, which are enforced and prescribed by the violations of symmetry-prescribed compatibility relations. Moreover, the surface states and the associated origin from the same set of entangled bands are identified, thereby establishing the bulk-boundary correspondence. To evaluate the effects of chemical modifications, the response of topological surface states to various surface terminations, stoichiometry, and oxidation is examined. The surface structures are globally optimized, and the phase diagrams for various experimental conditions are built. It is shown that, due to changes in the local chemical environment, the original surface states are significantly altered. Modified surface bands can be observed near the Fermi level on surface terminations that preserve the C 4v symmetry.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Quantifying biofilm propagation on chemically modified surfaces

Conditions affecting biofilm formation differ among bacterial species and this presents a challenge to studying biofilms in the lab. This work leverages functionalized silanes to control surface chemistry in the study of early biofilm propagation, quantified with a semi-automated image processing algorithm. These methods support the study of Pantoea sp. YR343, a gram-negative bacterium isolated from the poplar rhizosphere. We found that Pantoea sp. YR343 does not readily attach to hydrophilic surfaces but will form biofilms with a “honeycomb” morphology on hydrophobic surfaces. Our image processing algorithm described here quantified the evolution of the honeycomb morphology over time, and found the propagation to display a logarithmic behavior. This methodology was repeated with a flagella-deficient fliR mutant of Pantoea sp. YR343 which resulted in reduced surface attachment. Quantifiable differences between Pantoea WT and ΔfliR biofilm morphologies were captured by the image processing algorithm, further demonstrating the insight gained from these methods.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

dynamics of organic-mineral interactions at the metal oxide-solution interface as studied via binding energetics (Final report)

This project focused on addressing longstanding fundamental and experimental uncertainties on how dissolved organic substances (DOS) interact with metal oxide surface under environmentally relevant conditions. By leveraging a custom-built real-time, in-tandem flow adsorption microcalorimetry-UV-Vis/fluorescence spectroscopy platform, we characterized the binding energetics, kinetics and mechanistic pathways driving DOS-metal oxide interactions at temporal resolution on the order of 1-5 seconds. We studied a diverse suite of model organic compounds/substances – including monocarboxylates (e.g. acetate and benzoate), di-carboxylates (oxalate and succinate), amino acids, amino-based nanparticles and natural organic matter – interacting at the mineral-water interface of structurally- and/or chemically distinct metal oxides (including SiO2, boehmite, ferrihydrite, and γ-Al2O3). Our results indicated that DOS-metal oxide interactions are governed by multi-step reaction pathways, often switching between distinct, resolvable enthalpy- and entropy-driven non-electrostatic or electrostatic configurations. To quantify these interactions, we developed and implemented an analytical workflow that integrates peak deconvolution and Monte-Carlo based error propagation to determine site-specific thermodynamic and kinetic parameters for individual binding/debinding events. In addition to resolving apparent first-order rate constants of each event, we were able to quantify associated apparent equilibrium constants as well as free energy, enthalpy and entropy contribution to the activation and subsequent progression of the binding/debinding process across compounds, compound class and metal oxide surfaces. The kinetic-thermodynamic data produced in this study captured how the interplay between oxide surface reactivity and DOS molecular structure jointly drives binding-debinding dynamics. Notably, that at pH below PZC of the oxide surface, neutral species were heavily involved in monocarboxylate binding, while anionic species drove dicarboxylate binding. Also, that among amino acids 1) positional isomers show distinctive binding characteristics to each other while enantiomers show no significant differences in binding characteristics, 2) molecules that bind via outer-sphere complexation show a larger entropic shift between binding and debinding with no impact on oxide surface while 3) inner-sphere interactions increased anion exchange capacity of the oxide surface. The new insights and data from this work has great potential for improving predictive modeling of carbon dynamics and specifically organic-mineral interactions in environmental and industrial systems.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Sub-melt nanosecond pulsed-laser induced densification and strain-field relaxation in single-crystal diamond

Dislocations and polishing-induced defect networks in synthetic diamond introduce local strain fields and broaden Raman features, limiting performance in optical, thermal, and electronic applications. Laser annealing is emerging as a promising approach to repair surface and near-surface defects in diamond without entering the melt regime, yet surface densification, defect-state modification, and associated structural changes have not been well quantified. In this work, we show that sub-melt nanosecond pulsed-laser annealing (PLA) induces near-surface densification and defect-mediated strain relaxation in single-crystal Chemical Vapor Deposition (CVD) diamond. Single- and two-pulse PLA were applied, and structural evolution was quantified using co-registered ISO 25,178 white-light interferometry, depth-resolved Raman spectroscopy, and cross-sectional STEM with geometric phase analysis (GPA). Across a 5 × 6 grid (n = 30), responsive regions exhibit large reductions in local slope (Sdq 45–65%), developed area (Sdr 60–90%), height spread (Sp, Sz 30–65%), void volume (Vv 57–60%), and roughness amplitude (Sa, Sq 48–57%), consistent with densification of ∼4–6.5 nm. Raman profiling shows narrowing of the diamond line and improved spectral uniformity to depths of ∼2–3 μm. Given that the Raman probing depth significantly exceeds the densified layer thickness, this response is interpreted as consistent with long-range strain-field redistribution originating from the near-surface region. STEM-GPA strain maps further support this interpretation, showing smoother strain fields, suppressed hotspots, and redistribution of localized strain concentrations following PLA. These results are consistent with defect-mediated strain relaxation and densification-driven modification of the near-surface energy state. The approach provides a scalable pathway for improving near-surface structural quality in diamond relevant to electronic, photonic, and quantum applications.

Areal surface metrology (ISO 25,178)↗
DOE OSTI2021

Quantifying the anomalous water absorption behavior of cement mortar in view of its physical sensitivity to water

The one-dimensional water absorption into cement-based materials, possibly the simplest case of unsaturated water flow playing a fundamental role in predicting mass transport and durability, is still far from being completely understood due to several puzzling anomalies. Considering the water sensitivity of C-S-H gels (swell upon wetting and contract upon drying), a modified Richards equation (MRE) is proposed to quantify the anomalous water absorption into cement-based materials of changing porosity. Consistent experimental tests on a cement mortar and calculations indicate that the MRE with time-decaying water permeability can quantitatively capture the long-term absorption with two linear stages and a nonlinear transition stage between them. The water sensitivity is validated to be responsible for the anomalous deviation of water absorption from the classical square root of time law. It also partially contributes to the anomalous dependence of sorptivity on the temperature-dependent surface tension and viscosity of water and many organic liquids.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Contributions to the Surface Downwelling Longwave Irradiance during Arctic Winter at Utqiaġvik (Barrow), Alaska

Intrusions of warm, moist air into the Arctic during winter have emerged as important contributors to Arctic surface warming. Previous studies indicate that temperature, moisture, and hydrometeor enhancements during intrusions all make contributions to surface warming via emission of radiation down to the surface. Here, datasets from instrumentation at the Atmospheric Radiation Measurement User Facility in Utqiaġvik (formerly Barrow) for the six months from November through April for the six winter seasons of 2013/14–2018/19 were used to quantify the atmospheric state. These datasets subsequently served as inputs to compute surface downwelling longwave irradiances via radiative transfer computations at 1-min intervals with different combinations of constituents over the six winter seasons. The computed six winter average irradiance with all constituents included was 205.0 W m −2 , close to the average measured irradiance of 206.7 W m −2 , a difference of −0.8%. During this period, water vapor was the most important contributor to the irradiance. The computed average irradiance with dry gas was 71.9 W m −2 . Separately adding water vapor, liquid, or ice to the dry atmosphere led to average increases of 2.4, 1.8, and 1.6 times the dry atmosphere irradiance, respectively. During the analysis period, 15 episodes of warm, moist air intrusions were identified. During the intrusions, individual contributions from elevated temperature, water vapor, liquid water, and ice water were found to be comparable to each other. These findings indicate that all properties of the atmospheric state must be known in order to quantify the radiation coming down to the Arctic surface during winter.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

A Machine Learning Correction Model of the Winter Clear-Sky Temperature Bias over the Arctic Sea Ice in Atmospheric Reanalyses

Atmospheric reanalyses are widely used to estimate the past atmospheric near-surface state over sea ice. They provide boundary conditions for sea ice and ocean numerical simulations and relevant information for studying polar variability and anthropogenic climate change. Previous research revealed the existence of large near-surface temperature biases (mostly warm) over the Arctic sea ice in the current generation of atmospheric reanalyses, which is linked to a poor representation of the snow over the sea ice and the stably stratified boundary layer in the forecast models used to produce the reanalyses. These errors can compromise the employment of reanalysis products in support of polar research. Here, we train a fully connected neural network that learns from remote sensing infrared temperature observations to correct the existing generation of uncoupled atmospheric reanalyses (ERA5, JRA-55) based on a set of sea ice and atmospheric predictors, which are themselves reanalysis products. The advantages of the proposed correction scheme over previous calibration attempts are the consideration of the synoptic weather and cloud state, compatibility of the predictors with the mechanism responsible for the bias, and a self-emerging seasonality and multidecadal trend consistent with the declining sea ice state in the Arctic. The correction leads on average to a 27% temperature bias reduction for ERA5 and 7% for JRA-55 if compared to independent in situ observations from the MOSAiC campaign (respectively, 32% and 10% under clear-sky conditions). These improvements can be beneficial for forced sea ice and ocean simulations, which rely on reanalyses surface fields as boundary conditions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Friction surfacing and cold spray deposition for surface crack repair in austenitic stainless steels

Two technologies, friction surfacing (FS) and cold spray deposition (CSD), have been investigated for field repair of cracks in 304L austenitic stainless steel. Both technologies are low-heat-input, solid-state technologies that do not introduce the detrimental effects of solidification, such as compositionally segregated microstructures and shrinkage stresses. Friction surfacing was performed using a 304L stainless steel rod over the substrate of the same material. Further, the process was performed at a high spindle speed of 20,000 RPM allowing for process forces below 500N to be used effectively. Spherical gas-atomized 304L stainless steel powder, in size range of 25–44 µm, was used as feedstock powder for the cold spray process for deposition on 304L substrates. Both technologies showed leak-tight crack repair capabilities on ~30–50 µm wide simulated through-crack specimens based on helium leak tests.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Sea Surface Salinity Reemergence in an Updated North Atlantic In Situ Salinity Dataset

Monthly sea surface salinity (SSS) fields are constructed from observations, using objective mapping on a 1° x 1° grid in the Atlantic between 30°S and 50°N in the 1970-2016 period in an update of the dataset of Reverdin et al. Data coverage is heterogeneous, with increased density in 2002 when Argo floats become available, high density along Voluntary Observing Ship lines, and low density south of 10°S. Using lag correlation, the seasonal reemergence of SSS anomalies is investigated between 20° and 50°N in 5° x 5° boxes during the 1993-2016 period, both locally and remotely following the displacements of the deep mixed-layer waters estimated from virtual float trajectories derived from the daily AVISO surface geostrophic currents. Although SSS data are noisy, local SSS reemergence is detected in about half of the boxes, notably in the northeast and southeast, while little reemergence is seen in the central and part of the eastern subtropical gyre. In the same period, sea surface temperature (SST) reemergence is found only slightly more frequently, reflecting the short data duration. However, taking geostrophic advection into account degrades the detection of remote SSS and even SST reemergence. When anomalies are averaged over broader areas, robust evidence of a second and third SSS reemergence peak is found in the northeastern and southeastern parts of the domain, indicating long cold-season persistence of large-scale SSS anomalies, while only a first SST reemergence is seen. Finally, an oceanic reanalysis is used to confirm that the correlation analysis indeed reflects the reemergence of subsurface salinity anomalies.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Effectiveness of PCE superplasticizers in calcined clay blended cements

Highlights: • Cements containing 0–40 wt% of a calcined clay rich in meta kaolin were studied. • The calcined clay decreases fluidity of the blended cements considerably. • In cement, the calcined clay adsorbs a large amount of Ca{sup 2+} ions. • A common HPEG polycarboxylate superplasticizer fluidizes OPC/CC blends best. • A zwitterionic PCE also fluidizes well and adsorbs in similar amounts as HPEG. The impact of a calcined clay (CC) rich in meta kaolin (~50 wt%) present in composite cements at 0–40% substitution rate for the clinker was studied relative to the dispersing force of different PCE superplasticizers. It was found that CC increases the water demand of the blended cements considerably (+85% for the 60:40 blend vs. neat OPC). Furthermore, PCEs which fluidize OPC best also provide optimal performance in CC blended cements, but require much higher dosages (in OPC/CC 60:40, 4–6 times as compared to neat OPC). In all systems, HPEG-PCE produced superior dispersing performance over anionic MPEG-PCEs. A mechanistic study involving zeta potential measurements revealed that the initially negatively charged calcined clay surface adsorbs huge amounts of Ca{sup 2+} ions from the pore solution, thus facilitating adsorption of anionic PCE superplasticizers. The results signify that commercially available PCE products can effectively fluidize OPC/CC blended cements.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Atomic Force Microscopy and Infrared Nanospectroscopy of COVID-19 Spike Protein for the Quantification of Adhesion to Common Surfaces

The COVID-19 pandemic has claimed millions of lives worldwide, sickened many more, and has resulted in severe socio-economic consequences. As society returns to normal, understanding the spread and persistence of SARS CoV-2 on commonplace surfaces can help to mitigate future outbreaks of coronaviruses and other pathogens. We hypothesize that such an understanding can be aided from studying the binding and interaction of viral proteins with non-biological surfaces. Here, we propose a methodology for investigating the adhesion of the SARS CoV-2 spike glycoprotein on common inorganic surfaces such as aluminum-, copper-, iron-, silica-, and ceria-oxides as well as metallic gold. Quantitative adhesion was obtained from the analysis of measured forces at the nanoscale using an atomic force microscope operated under ambient conditions. Without imposing further constraints on the measurement conditions, our preliminary findings suggest that spike glycoproteins interact with similar adhesion forces across the majority of the metal oxides tested with the exception to gold, for which attraction forces ~10 times stronger than all other materials studied were observed. Ferritin, which was used as a reference protein, was found to exhibit similar adhesion forces as SARS CoV-2 spike protein. Further, this study results show that glycoprotein adhesion forces for similar ambient humidity, tip shape, and contact surface are non-specific to the properties of metal oxide surfaces, which are expected to be covered by a thin water film. The findings suggest that at ambient conditions glycoprotein adhesion to metal oxides is primarily controlled by the water capillary forces and they depend on the surface tension of the liquid (water). We discuss further strategies warranted to decipher the intricate nanoscale forces for improved quantification of the adhesion.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Manipulating Surface Termination of Perovskite Manganate for Oxygen Activation

For ABO 3 perovskite oxides, one of the key issues limiting their utilization in heterogeneous catalysis is the dominant presence of catalytically inactive A-site cations at the surface. The engineering of B-site terminated perovskites is considered as an effective method to address this issue, especially when dealing with Mn/Co-based perovskite catalysts. However, to date, such a strategy has not been fully successful and remains a major challenge in the field. Herein, a Mn-terminated La 0.45 Sr 0.45 MnO 3 (B-LSM) is successfully synthesized via a one-pot hydrothermal method, in which low-valence Mn ions partially occupy the A site to form the active Mn-excess phase. Additionally, experimental results and theoretical calculations reveal that the presence of the surface Mn termination in B-LSM optimizes the hybrid orbitals of Mn 3d-O 2p and promotes the activation of surface lattice oxygen, where the pristine inert lattice O 2- is evolved into active and stable lattice O 2-x . Such structural optimization significantly reduces the activation energy barriers on going from O 2 ⁻ species to important intermediate O - species during O 2 activation. Moreover, this results in good stability and Pt-like activity for the B-LSM during CO oxidation. This work offers a new chemical route for the design of advanced perovskite-type oxides possessing novel functions.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Development of Material Studies at the LANL UCN Facility Focusing on Actinide Hydriding and Fission Damage

The aging of as-built actinide surfaces in static and dynamic environments is a complex problem of high importance to LANL’s core mission. Many standard material science tools used to study this problem are ideal for highly controlled, lab-made samples. The goal of this work is to use ultracold neutrons to bridge the gap between lab made and as-built surface aging studies. This capability is unique to LANL and will support our core mission.

36 MATERIALS SCIENCE↗
DOE OSTI2023

The importance of explicitly representing the streambed in watershed models

Abstract The streambed is the critical interface between the aquatic and terrestrial systems and hosts important biogeochemical hot spots within river corridors. Although the streambed characteristics are significantly different from those of its surrounding soil, the streambed itself has not been explicitly represented in watershed models. Here, we explicitly incorporated a streambed layer into an integrated hydrologic model through model parameterization and discretization. We examined the hydrological effects of streambed characteristics, including hydraulic conductivity ( K ), layer thickness, and resolution, on the exchange fluxes across the streambed as well as the streamflow at the watershed outlet. The numerical experiments were performed in the American River Watershed, a headwater, mountainous watershed within the Yakima River Basin in central Washington. Despite having a negligible effect on the watershed streamflow, an explicit representation of the streambed with distinctive properties dramatically changed the magnitude and variability of the exchange flux. In general, a larger streambed K along with a thicker streambed layer induced larger exchange fluxes. The exchange flux was most sensitive to the streambed resolution. A finer streambed resolution increased exchange fluxes per unit area while reducing the overall exchange volumes across the entire streambed. The amount of baseflow decreased by 6% as the streambed resolution increased from 250 to 50 m. This finding is important because these hydrological changes may, in turn, affect the exchange of nutrients and contaminants between surface water and groundwater and the associated biogeochemical processes. Our work demonstrated the importance of representing streambeds in fully distributed, process‐based watershed models to better capture the exchange flow dynamics in river corridors.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Gridded Sub-daily Climate Forcings for North America Based on Daymet and ERA5 (Daymet-ERA5)

To support high spatial and temporal resolution land surface modeling, this dataset provides hourly time step historic weather forcing at 1-km spatial resolution for the entire North America. The latest Daymet V4 data provides gridded historic daily weather observations at 1-km spatial resolution from 1980 to 2024. Using sub-daily temporal information from the ECMWF ERA5 reanalysis, Daymet was further temporally downscaled to hourly time steps and provided in the format required for land surface model simulations. The process of temporal downscaling preserves the relative magnitude in each hourly time step from ERA5 while maintaining the total and average values from Daymet for each day. This results in a blended 1980-2024 Daymet-ERA5 dataset. Available variables include surface air temperature, precipitation, specific humidity, shortwave and longwave radiation, wind speed, and pressure. These data can be used as a high-resolution meteorological forcing dataset to support high-resolution land surface modeling where accurate meteorological forcing datasets built from historic observations and/or reanalysis datasets are desirable.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

How a raindrop gets shattered on biological surfaces

Many biological surfaces of animals and plants (e.g., bird feathers, insect wings, plant leaves, etc.) are superhydrophobic with rough surfaces at different length scales. Previous studies have focused on a simple drop-bouncing behavior on biological surfaces with low-speed impacts. However, we observed that an impacting drop at high speeds exhibits more complicated dynamics with unexpected shock-like patterns: Hundreds of shock-like waves are formed on the spreading drop, and the drop is then abruptly fragmented along with multiple nucleating holes. Such drop dynamics result in the rapid retraction of the spreading drop and thereby a more than twofold decrease in contact time. Our results may shed light on potential biological advantages of hypothermia risk reduction for endothermic animals and spore spreading enhancement for fungi via wave-induced drop fragmentation.

59 BASIC BIOLOGICAL SCIENCES↗