Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Surface Power”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Monolithic Interconnected Modules (MIMs) for Thermophotovoltaic Energy Conversion

Monolithic Interconnected Modules (MIM) are under development for thermophotovoltaic (TPV) energy conversion applications. MIM devices are typified by series-interconnected photovoltaic cells on a common, semi-insulating substrate and generally include rear-surface infrared (IR) reflectors. The MIM architecture is being implemented in InGaAsSb materials without semi-insulating substrates through the development of alternative isolation methodologies. Motivations for developing the MIM structure include: reduced resistive losses, higher output power density than for systems utilizing front surface spectral control, improved thermal coupling and ultimately higher system efficiency. Numerous design and material changes have been investigated since the introduction of the MIM concept in 1994. These developments as well as the current design strategies are addressed.

Wilt, David↗
NASA NTRSDate not supplied

An Assessment of and Access to NASA CERES Hourly Solar Irradiance Data Products Using POWER Web Services

The National Aeronautics and Space Administration’s (NASA) Clouds and Earth’s Radiant Energy System (CERES) Mission has been providing surface solar irradiance data products since March 2000. With an emphasis on global climate quality data products, CERES produces a suite of data parameters related to both the inputs and the observed and measured solar irradiance components at the top-of-atmosphere and at the surface. This paper discusses the global CERES SYN1Deg (Synoptic 1x1 degree resolution) solar irradiance data products, shows that the accuracy of the global horizontal irradiance (GHI) at the hourly time scale is <1% for bias and 24% RMS compared to the Baseline Surface Radiation Network (BSRN) measurements. This paper then shows the accuracy of the direct and diffuse components and a proposed “bias” correction based upon the solar zenith angle dependence that provides accuracy useful for solar applications on a global basis for all sunlit conditions. Lastly, a brief description of how to obtain these hourly solar irradiance products based upon SYN1Deg using the NASA’s Prediction of Worldwide Energy Resource (POWER) web services portal is given so users can utilize these estimates for testing and evaluation.

Surface solar irradiance↗
DOE OSTI2025

Raman Laser-Induced Structural Modification in CVD-Grown Monolayer MoS 2 for Multi-Purposed Nanofabrication

Molybdenum disulfide (MoS 2 ) has been extensively explored to be utilized as an electronic material in a variety of device applications. In particular, the tunability of MoS 2 enhances its electrical properties making it an intriguing candidate for field-effect transistors (FETs), while also extending beyond electrical properties to structural phase engineering. Laser-induced modifications, particularly with Raman lasers, offer a straightforward method to modulate materials via thermal processes with precise patterning control and energy-level flexibility. However, most studies on the modification of MoS 2 have focused on multilayered structures or have been conducted under low-power laser conditions, leaving the feasibility of structural modifications in monolayer MoS 2 elusive. In this study, we fundamentally elucidated the effects of high-power Raman laser irradiation on the surface of chemical vapor deposition (CVD)-grown monolayer MoS 2 under ambient conditions and uncovered the underlying mechanisms of laser-induced modifications by applying intense photon energy with highly interactive reactions. Our results revealed both etching and deposition phenomena in two discernible regions, and it can be demonstrated by intensity regimes based on the spatial distribution of laser irradiance within the laser-irradiated spot. Furthermore, phase transition was found to be inhibited due to the promoted oxidation and the deposition of hydrogenated amorphous carbon (a-C:H), and p-type doping was observed, likely occurring in the region beneath the a-C:H deposition as substitutional doping on the 2H phase of MoS 2 . To compare the thermal effects, MoS 2 modifications were further analyzed using simplified heat transfer estimations. In conclusion, these findings deepen our understanding of how Raman laser irradiation modifies MoS 2 under ambient conditions, providing guidelines for optimizing its modification processes.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Constrained nuclear–electronic orbital method for periodic density functional theory: Application to H 2 chemisorption on Si(001) surfaces

The nuclear–electronic orbital (NEO) method provides a powerful computational framework for incorporating nuclear quantum effects (NQE) in electronic structure calculations beyond the Born–Oppenheimer approximation. By incorporating additional constraints to the position operator on quantum particles like protons, the NEO method enables calculation of effective potential that accounts for NQE. Here, in this work, we present a new constrained NEO (cNEO) formulation for density functional theory (cNEO-DFT) calculations in the context of extended periodic systems. Using the nudged elastic band method, we discuss an application of the cNEO-DFT approach to studying the adsorption of a hydrogen molecule on the Si(001) surfaces. The calculation shows how NQE impacts the reaction energetics. The proton density changes are computed along the reaction pathways. This work demonstrates the capability of the new cNEO-DFT method to study a wide range of chemical processes, such as surface reactions where the quantum nature of light atoms like protons is non-negligible.

Chemical processes↗
NASA NTRS1982

Gas-phase hydrogen permeation through alpha-titanium - Surface film and dimensional effects

The process of hydrogen transport through alpha-Ti involves simultaneous diffusion and phase boundary reactions at both surfaces, with the relative effect on each surface depending on the extent of surface contamination as well as the physical dimensions of the titanium membrane used. It is shown by the present study that hydrogen permeation in commercially pure alpha-Ti increases exponentially with temperature and is dependent on the first power of the input pressure, whether the surface is as-polished, preoxidized or prenitrided. Permeation decreases in the case of the as-polished condition if nitride or oxide films are formed at the surface in contact with source hydrogen, while increasing slightly for the same condition if such films are formed at the hydrogen exit surface.

Shah, K. K.↗
NASA NTRS2010

Electrostatic Power Generation from Negatively Charged, Simulated Lunar Regolith

Research was conducted to develop an electrostatic power generator for future lunar missions that facilitate the utilization of lunar resources. The lunar surface is known to be negatively charged from the constant bombardment of electrons and protons from the solar wind. The resulting negative electrostatic charge on the dust particles, in the lunar vacuum, causes them to repel each other minimizing the potential. The result is a layer of suspended dust about one meter above the lunar surface. This phenomenon was observed by both Clementine and Surveyor spacecrafts. During the Apollo 17 lunar landing, the charged dust was a major hindrance, as it was attracted to the astronauts' spacesuits, equipment, and the lunar buggies. The dust accumulated on the spacesuits caused reduced visibility for the astronauts, and was unavoidably transported inside the spacecraft where it caused breathing irritation [1]. In the lunar vacuum, the maximum charge on the particles can be extremely high. An article in the journal "Nature", titled "Moon too static for astronauts?" (Feb 2, 2007) estimates that the lunar surface is charged with up to several thousand volts [2]. The electrostatic power generator was devised to alleviate the hazardous effects of negatively charged lunar soil by neutralizing the charged particles through capacitive coupling and thereby simultaneously harnessing power through electric charging [3]. The amount of power generated or collected is dependent on the areal coverage of the device and hovering speed over the lunar soil surface. A thin-film array of capacitors can be continuously charged and sequentially discharged using a time-differentiated trigger discharge process to produce a pulse train of discharge for DC mode output. By controlling the pulse interval, the DC mode power can be modulated for powering devices and equipment. In conjunction with a power storage system, the electrostatic power generator can be a power source for a lunar rover or other systems. The negatively charged lunar soil would also be neutralized mitigating some of the adverse effects resulting from lunar dust.

Choi, Sang H.↗
DOE OSTI2022

Plasma production and composition from hypervelocity impacts on solar cell cover glass

Satellites are subjected to detrimental effects from the space environment, including impacts by orbital debris and meteoroids that can cause mechanical or electrical damage. While mechanical damage is well studied, electrical effects resulting from hypervelocity impact (HVI) remain poorly understood. In HVIs, where the projectile speed exceeds the speed of sound in the target material, the impact energy ionizes the material near the surface, creating a plasma that can cause radio frequency emission. This emission is the main source of electrical anomalies in satellites, but the mechanism behind its creation is still unknown. Ground-based experiments have been used to characterize HVI plasma, including the empirical power law relations that describe the impact charge produced as a function of impactor mass and speed. Quantifying these power law relations gives us a better understanding of the species formed in the impact which can eventually lead to plasma evolution models and help us first, understand the mechanism behind radio frequency emission and second, ways to prevent its damage to the satellites. In this paper, we interpret the results of the HVI experiments on solar cell coverglass targets and identify the potential chemical or molecular reactions that form the impact ion species. This is done by looking simultaneously at multiple data sets for different species within the same impact configuration, and using a new technique for quantifying the power law relations for each emitted species. We use time of flight analysis (TOF) to detect the charged particle compositions and determine their initial speeds. The results suggest that the charge production power law is species specific, with different formation mechanisms involved in a single HVI event, some of which are associated with dissociation and some with ionization of a molecule. Furthermore, our results also show that electrons have different power laws that depend on the spacecraft surface charge. TOF measurements of ions from impact events on solar cell cover glass shows the presence of SiO + and SiO – 2 as the dominant species present in plasmas on positively and negatively charged targets, respectively, as well as the formation of FeO + .

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1993

(abstract) Spatial Power Spectral Measurements of IR Cirrus

We have used recently released IRAS Sky Survey Atlas (ISSA) image data to investigate the surface brightness distribution of selected regions of infrared cirrus using power spectral analysis techniques.

cirrus infrared IRAS Sky Survey Atlas brightness d↗
NASA NTRS1983

Hue-saturation-intensity split-spectrum processing of Seasat radar imagery

Characteristics of terrain features in orbital radar imagery are investigated on the basis of radar physics and the human visual system. Signal scattering, the dominant factor in radar imagery, is caused by look angle and relief displacement. Power spectra characteristics are explored, noting that surface scattering dominates the low frequencies and slope significantly affects the high frequency tone variations. The maximum human visual response has been identified for achromatic scenes as 7 cycles per degree, whereas in radar imagery the low frequency half-power point occurs near 2.5 cycles/deg. Image feature size at a scale of 1:500,000 has been calculated for the maximum human response at 1.25 km. A hue-saturation-intensity transformation is presented for displaying two or three data sets on the same image and is demonstrated for Seasat SAR imagery. The transformation is shown to restore low spatial frequencies to the SAR imagery in order to identify terrain features which would otherwise not be visually discernible.

Daily, M.↗
DOE OSTI2020

Best Practices for Shielding Analyses of Activated Metals and Spent Resins from Reactor Operation

This report investigated best practices for performing shielding evaluations of Type B waste packages, as defined in 10 CFR Part 71 regulations on packaging and transportation of radioactive material, or packages for which the contents are not defined before loading and may include a broad range of nuclides, geometries, and non-fuel materials. The following non-fuel waste streams were analyzed: Activated metals from decommissioned commercial power reactors, including Type 304 stainless steel, reactor vessel steel, and Inconel, Control blades from boiling water reactors, Neutron-activated corrosion products on surfaces of activated metals, and Spent resins from power plant operations. Measured elemental compositions, including major constituents and impurities, for steel and Inconel samples from commercial power reactors were used in activation calculations to determine radionuclide inventories in activated metals. For a simplified cask model, 60 Co contribution to the total external package dose rate at 30 days after shutdown varied from approximately 60% to 95%, depending on the activated metal, initial cobalt impurity concentration in the metal, and the thickness of the overpack gamma shield. Its maximum contribution to the total external package dose rate of approximately 100% was reached within the time interval of 2 to 5 years after shutdown and was maintained for up to 45 to 60 years after shutdown, depending on material, initial cobalt impurity concentration, and shield thickness. Thereafter, the 60 Co contribution to external package dose rate decreased with increasing decay time. Cobalt-60 is primarily produced by neutron reactions with the cobalt impurity in steel and Inconel. Other important radionuclides in activated metals contributing to package external dose rate are radionuclides with relatively short decay times, including 51 Cr, 59 Fe, 58 Co, and 54 Mn. These radionuclides may be represented as an equivalent 60 Co activity/source because 60 Co gamma ray emissions are bounding in terms of source strength and energy to other important radionuclides identified in the analyzed activated metals. Approaches for modeling the neutron-activated corrosion products that may be attached to activated reactor components were analyzed in this report. It was demonstrated that a surface source is more conservative than a uniform volumetric source for the treatment of neutron-activated corrosion products with respect to external package dose rates. An analysis of the maximum radionuclide loadings reported on spent resins identified the radionuclides 137 Cs, 60 Co, 134 Cs, 65 Zn, and 58 Co as the primary contributors to external package dose rate. For a resin cooled for 3.08 years, the external package dose rate was entirely produced by the reported 137 Cs and 60 Co inventory. The neutron sources from actinides found on spent resins or activated metals produced negligible dose rates and may be ignored in dose rate analyses. Effects of idealized waste material, source geometry, and spatial material/source distributions on external package dose rates were determined based on dose rate results for a simplified cask model under normal conditions of transport. Type 304 stainless steel, zirconium, and aluminum with adjusted mass densities based on a maximum content weight were analyzed for material modeling effects on external package dose rate. These materials produced identical external package dose rates within the statistical uncertainties of the dose rate estimates. Among four different source geometry configurations with homogeneous material of different mass densities, uniform volumetric source distribution, and the same source strength, the geometry configuration with lowest mass density (i.e., minimum self-shielding effect among the four cases) was most conservative. Spatial source distributions that better represent localized peak 60 Co activity values were more conservative than a uniform volumetric source distribution, assuming the same weight and total source strength per package. The increase in external dose rate caused by localized source peaks can be as much as the ratio between source peak activity density to average activity density, depending on the location of the activated metal with peak activity density. Therefore, the shielding analysis may be simplified if localized peak activities and the average activity per package can be measured/determined and documented at the time of cask loading. For simplicity, external package dose rates may be determined based on average source activity and a uniform volumetric source distribution. The dose rate results from that calculation model multiplied by the ratio of peak activity density to average activity density will produce maximum dose rate values for conservative estimates.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Effect of LPBF Processing Parameters on Inconel 718 Lattice Structures: Geometrical Characteristics, Surface Morphology, and Mechanical Properties

Laser Powder Bed Fusion (LPBF) enables the additive manufacturing of complex lattice structures. However, the fabrication of lattice structures via LPBF poses challenges in achieving the intended geometrical accuracy due to their inherent complexity. This study investigates the effects of LPBF processing parameters, specifically laser power and scanning speed, on the geometrical characteristics, surface quality, and mechanical behavior of Inconel 718 lattices structures. The results reveal that processing parameters required for the fabrication of near-full dense structures do not translate effectively to lattice configurations, as variations in energy input influence lattice geometry and surface quality. In this work, strut thickness, open-pore size, open-cell porosity, and surface roughness were measured, and the mechanical properties of the lattices were evaluated under shear loading. The findings indicate that lower energy inputs, achieved by reducing laser power and increasing scanning speed, yield porous structures but lead to mechanical degradation. In contrast, high energy inputs lead to lattices with enhanced strength but result in undesirable open-pore blockage and dimensional inaccuracies. These findings provide insights into tailoring LPBF parameters for dimensional accuracy in lattices and correlating the processing parameters to mechanical performance and surface roughness.

36 MATERIALS SCIENCE↗
DOE OSTI2022

X-ray ptychographic tomography reveals buried 3D structural defects in metal halide perovskites

For the first of its kind, X-ray ptychographic imaging is utilized for probing metal halide perovskite crystals, revealing various 3D structural defects fully or partially buried underneath the perovskite surface. Here, this work demonstrates a powerful, non-intrusive 3D tomographic characterization method to illuminate the complete microstructure of perovskites for advanced energy applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Connecting Interfacial Mechanical Adhesion, Efficiency, and Operational Stability in High Performance Inverted Perovskite Solar Cells

Carbazole-based self-assembled monolayers (SAMs) at the interface between the metal-halide perovskite (MHP) and the transparent conducting oxide (TCO) serve the function of hole-transport layers in p-i-n "inverted" perovskite solar cells (PSCs). In this report we show that the use of an iodine-terminated carbazole-based SAM increases the interfacial mechanical adhesion dramatically (2.6-fold) and that this is responsible for substantial improvements in the interfacial morphology, photocarrier transport, and operational stability. While the improved morphology and optoelectronic properties impart high efficiency (up to 25.39%) to the PSCs, the enhanced adhesion suppresses nucleation and propagation of pores/cracks during PSC operation, resulting in the retention of 96% of the initial efficiency after 1000 h of continuous-illumination testing at the maximum power-point. This demonstrates the strong connection between judicious interfacial adhesion toughening and simultaneous enhancement in the efficiency and operational stability of p-i-n PSCs, with broader implications for the reliability and durability of perovskite photovoltaics before they can be commercialized.

14 SOLAR ENERGY↗
DOE OSTI2021

Automated discovery of a robust interatomic potential for aluminum

Machine learning, trained on quantum mechanics (QM) calculations, is a powerful tool for modeling potential energy surfaces. A critical factor is the quality and diversity of the training dataset. Here we present a highly automated approach to dataset construction and demonstrate the method by building a potential for elemental aluminum (ANI-Al). In our active learning scheme, the ML potential under development is used to drive non-equilibrium molecular dynamics simulations with time-varying applied temperatures. Whenever a configuration is reached for which the ML uncertainty is large, new QM data is collected. The ML model is periodically retrained on all available QM data. The final ANI-Al potential makes very accurate predictions of radial distribution function in melt, liquid-solid coexistence curve, and crystal properties such as defect energies and barriers. We perform a 1.3M atom shock simulation and show that ANI-Al force predictions shine in their agreement with new reference DFT calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Additive manufacturing of LiCoO 2 electrodes via vat photopolymerization for lithium ion batteries

Additive manufacturing has the potential to revolutionize the fabrication of lithium-ion batteries for a diversity of applications including in portable, biomedical, aerospace, and the transportation fields. Standard commercial batteries consist of stacked layers of various components (current collectors, cathode, anode, separator and electrolyte) in a two-dimensional manner. By leveraging the latest advances in additive manufacturing and computer-aided design, an improved geometric and electrochemical configuration of these batteries can maximize energy efficiency while allowing design optimization to reduce dead space for a given application. In this work, a composite UV photosensitive resin was prepared and used as feedstock in a vat photopolymerization system. The resin was loaded with LiCoO 2 acting as electrochemically active material for the cathode of a lithium-ion battery, and was further improved with the addition of conductivity-enhancing carbonaceous additives. Challenges to additive manufacturing arise from the opacity and high viscosity of the composite nature of these electrochemically-active resins, which cause light refraction during selective UV curing. Subsequently, items were printed and subjected to a thermal post-processing step to obtain an adequate compromise between electrochemical performance and mechanical integrity. Both sintered and green state 3D printed cathodes were assembled into half-cell lithium-ion batteries using lithium metal as a reference and counter electrode. Electrochemical cycling of these batteries yielded satisfactory results approaching commercial LiCoO 2 cathodes’ performance, with the potential advantages of additive manufacturing – high surface area anode–cathode configurations for power performance as well as shape conformability.

25 ENERGY STORAGE↗
DOE OSTI2025

Ab-initio simulation of spin-vibronic spectra of methoxy radical

Despite the fact that experimental and theoretical work on the spectrum of methoxy has stretched from the microwave to the ultraviolet and proceeded for nearly 50 years, parts of the spectrum have remained a challenge to simulate theoretically and make reliable line-by-line assignments. The spectral complexity arises because the radical has a non-zero electron spin and significant vibronic coupling between the two elec- tronic components of the ground state due to the presence of a conical intersection. This work describes a completely ab initio effort to understand and assign the spin- vibronic levels of the X 2E state from 0 to above 3000 cm−1, a region that includes the fundamental transitions of the C-H symmetric and asymmetric stretches that have not previously been identified uniquely. A potential energy surface for methoxy was calculated at the EOM-CCSDT/ANO1 level of theory. Subsequently this potential energy surface was fit to a quartic power series expansion of all nine vibrational nor- mal coordinates (as determined at the minimum of the conical intersection) by the use of a machine-learning-based algorithm. After the addition of spin-orbit coupling, the spin-vibronic problem was solved using both the Krylov-Schur and Lanczos algorithms with the SOCJT3 software to converge eigenvalues up to 3500 cm−1 and their eigen- vectors. The latter were used, in conjunction with the calculated dipole moment and its derivatives (calculated using finite differences at EOM-CCSDT/ANO1 level), to determine spectral intensities for the spin-vibronic spectra. The calculated transition frequencies and intensities were used to simulate and assign the observed transitions of the spin-vibronic spectra of the radical. The credibility of the assignments and their significance is discussed in detail.

Sharma, Ketan [University of Florida, Gainesville,↗
DOE OSTI2020

A Scoping Study to Determine the Location-Specific WEC Threshold Size for Wave-Powered AUV Recharging

The aim of this study is to determine the threshold wave energy converter (WEC) type and size to charge a fleet of U.S. Navy autonomous underwater vehicles (AUVs) in various geographic locations of interest. The U.S. Navy deploys AUVs in locations around the world that must be charged manually, decreasing their operational endurance and creating operational limitations. Ocean waves are a potential power source that can be converted into electricity using a WEC and stored using a battery. It would be beneficial to develop a WEC that could autonomously charge AUVs offshore. Numerous locations were analyzed to determine the minimum size of a WEC capable of providing sufficient charging power and offering a strategic advantage. By predicting the WEC efficiency (based on empirical equations) and wave resource (based on available data), electrical power generation across numerous WEC types and locations was compared in MATLAB. The generalized process developed here could be used to determine the required size and type of WECs to charge a fleet of AUVs in different locations around the world.

16 TIDAL AND WAVE POWER↗
DOE OSTI2021

On-chip optical tweezers based on freeform optics

Since its advent in the 1970s, optical tweezers have been widely deployed as a preferred non-contact technique for manipulating microscale objects. On-chip integrated optical tweezers, which afford significant size, weight, and cost benefits, have been implemented, relying upon near-field evanescent waves. As a result, these tweezers are only capable of manipulation in near-surface regions and often demand high power since the evanescent interactions are relatively weak. We introduce on-chip optical tweezers based on freeform micro-optics, which comprise optical reflectors or refractive lenses integrated on waveguide end facets via two-photon polymerization. The freeform optical design offers unprecedented degrees of freedom to design optical fields with strong three-dimensional intensity gradients, useful for trapping and manipulating suspended particles in an integrated chip-scale platform. We demonstrate the design, fabrication, and measurement of both reflective and refractive micro-optical tweezers. The reflective tweezers feature a remarkably low trapping threshold power, and the refractive tweezers are particularly useful for multiparticle trapping and interparticle interaction analysis. Our integrated micro-optical tweezers uniquely combine a compact footprint, broadband operation, high trapping efficiency, and scalable integration with planar photonic circuits. This class of tweezers is promising for on-chip sensing, cell assembly, particle dynamics analysis, and ion trapping.

Yu, Shaoliang (ORCID:000000026072425X)↗