Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Solar Analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Efficiency calculations for Al/x/Ga/1-x/As-GaAs heteroface solar cells

A computer-assisted analysis of the Al(x)Ga(1-x)As-GaAs heteroface solar cell is done to find the dependence of cell efficiency on substrate doping level. Assumptions for carrier lifetime needed for the evaluation of efficiency are based on measurements of experimental Al(x)Ga(1-x)As-GaAs heteroface cells. The results show the doping range 10 to the 16th-17th power per cu cm to be the best for heteroface solar cells. Calculations based on a three-halves temperature dependence for lifetimes agree well with early experimental efficiency versus temperature measurements on GaAs cells, but conflict with earlier results for an Al(x)Ga(1-x)As-GaAs heteroface cell.

Sekela, A. M.↗

Contribution to solving the energy crisis - Simulating the prospects for low cost energy through silicon solar cells

PECAN (Photovoltaic Energy Conversion Analysis) is a highly interactive decision analysis and support system. It simulates the prospects for widespread use of solar cells for the generation of electrical power. PECAN consists of a set of integrated APL functions for evaluating the potential of terrestrial photovoltaics. Specifically, the system is a deterministic simulator, which translates present and future manufacturing technology into economic and financial terms, using the production unit concept. It guides solar cell development in three areas: tactical decision making, strategic planning, and the formulation of alternative options.

Kran, A.↗

USAF solar thermal applications overview

Process heat applications were compared to solar thermal technologies. The generic process heat applications were analyzed for solar thermal technology utilization, using SERI's PROSYS/ECONOMAT model in an end use matching analysis and a separate analysis was made for solar ponds. Solar technologies appear attractive in a large number of applications. Low temperature applications at sites with high insolation and high fuel costs were found to be most attractive. No one solar thermal technology emerges as a clearly universal or preferred technology, however,, solar ponds offer a potential high payoff in a few, selected applications. It was shown that troughs and flat plate systems are cost effective in a large number of applications.

Hauger, J. S.↗

Eastern Renewable Generation Integration Study Solar Dataset (Presentation)

The National Renewable Energy Laboratory produced solar power production data for the Eastern Renewable Generation Integration Study (ERGIS) including "real time" 5-minute interval data, "four hour ahead forecast" 60-minute interval data, and "day-ahead forecast" 60-minute interval data for the year 2006. This presentation provides a brief overview of the three solar power datasets.

14 SOLAR ENERGY↗

The Solar Futures Study

The Solar Futures Study explores potential pathways for solar energy to drive deep decarbonization of the U.S. electric grid by 2035, and envisions how further electrification could decarbonize the broader U.S. energy system by 2050.

2050↗

Optical, thermal, and electrical performance of low-CR solar arrays

This paper describes the analysis and testing of a photovoltaic low-CR concentrator shaped like a truncated pyramid with an aperture of 0.5 m on a side and a geometric concentration ratio of six. The truncated base plane is covered by either silicon (Si) or gallium arsenide (GaAs) solar cells. Ray-trace analysis of the concentrator predicts a peak optical efficiency of 0.77, which falls off only gradually with pointing error. A coupled thermal-electrical analysis of the system shows that the moderately nonuniform illumination produced by the concentrator does not result in significant mismatch losses, provided the solar cells are connected in parallel groups. The results of ground tests involving a full-scale prototype concentrator conform well with theoretical predictions.

French, E. P.↗

Using Behavioral Science to Target LMI and High-Value Solar Installations (Final Technical Report)

This project is a data-driven analysis of approaches to facilitate solar adoption in LMI communities and areas with high potential benefits to the electric grid. The cornerstone of the project was two waves of randomized field experiments. The first wave involved novel approaches to reaching LMI communities based on insights from literature. The second wave involved areas of high potential of solar to the electricity grid, as determined in collaboration with the local utilities in Connecticut. Both waves were followed by surveys to develop insight into the effectiveness of different approaches. A third key element of the project is the development of new agent-based models of solar energy diffusion that explicitly incorporate the real spatial and temporal constraints that influence solar diffusion, based on real-world data on solar adoption. The project also involved outreach and dissemination of key findings to relevant stakeholders, including a guidebook on strategies to accelerate solar deployment to low and moderate income communities, multiple academic publications, and numerous presentations of the research findings.

14 SOLAR ENERGY↗

Microscale Alfven waves in the solar wind at 1 AU

Analysis of IMP 1 (Explorer 43) plasma and magnetic field fluctuations on a scale of one hour revealed that linearly and circularly polarized Alfven waves are rarely present in the solar wind at 1 AU. The most prevalent microscale fluctuations appeared to be large-amplitude Alfven waves with small but non-zero fluctuations in the magnetic field intensity. These waves are present about 40% of the time and are predominantly propagating away from the sun.

Burlaga, L. F.↗

Quasi-Sun-Pointing of Spacecraft Using Radiation Pressure

A report proposes a method of utilizing solar-radiation pressure to keep the axis of rotation of a small spin-stabilized spacecraft pointed approximately (typically, within an angle of 10 deg to 20 deg) toward the Sun. Axisymmetry is not required. Simple tilted planar vanes would be attached to the outer surface of the body, so that the resulting spacecraft would vaguely resemble a rotary fan, windmill, or propeller. The vanes would be painted black for absorption of Solar radiation. A theoretical analysis based on principles of geometric optics and mechanics has shown that torques produced by Solar-radiation pressure would cause the axis of rotation to precess toward Sun-pointing. The required vane size would be a function of the angular momentum of the spacecraft and the maximum acceptable angular deviation from Sun-pointing. The analysis also shows that the torques produced by the vanes would slowly despin the spacecraft -- an effect that could be counteracted by adding specularly reflecting "spin-up" vanes.

Spilker, Thomas↗

A field gas chromatograph using technology developed for solar system exploration

Trace gas analysis is an integral part of biospheric studies. Analytical instruments, primarily gas chromatographs (GC), are capable of measuring gases and volatiles to the ppb-level in real time. Trace gases significant in the study of biocycles include nitrous oxide, hydrogen sulfide, other nitrogen and sulfur species, as well as methane and ethylene. The concept of a field gas chromatograph is derived from technology being pursued in the design of ultra-compact instruments for solar system exploration. The instrument breadboard incorporates the specialized porous column packings and the highly sensitive metastable ionization detector developed by the Solar System Exploration Office. These parts ensure a broad capability for which the analysis of ambient N2O is one example. A commercial, portable gas chromatograph is currently being extensively modified to incorporate analytical concepts and components derived from flight GC technology. Data storage devices suitable for field use are presently being studied.

Woeller, F. H.↗

A renewed search for short-lived 126 Sn in the early Solar System: Hydride generation MC-ICPMS for high sensitivity Te isotopic analysis

Although there is limited direct evidence for supernova input into the nascent Solar System many models suggest it formed by the gravitational collapse of a molecular cloud that was triggered by a nearby supernova. Existing lines of evidence mostly in the form of short lived radionuclidespresent in the early Solar System are potentially consistent with this hypothesis but still allow for alternative explanations. Since the natural production of Sn-126 is thought to occur only in supernovae and this isotope has a short half-life (Sn-126 -> Te-126 t(1/2) = 235 ky) the discovery of extant Sn-126 would provide unequivocal proof of supernova input to the early Solar System. Previous attempts to quantify the initial abundance of Sn-126 by examining Sn-Te systematics in early solids have been hampered by difficulties in precisely measuring Te isotope ratios in these materials. Thus here we describe a novel technique that uses hydride generation to dramatically increase the ionization efficiency of Te-an approximately 30-fold increase over previous work. This introduction system when coupled to a MC-ICPMS enables highprecision Te isotopic analyses on samples with < 10 ng of Te. We used this technique to analyze Te from a unique set of calcium-aluminum-rich inclusions (CAIs) that exhibit an exceptionally large range in Sn/Te ratios facilitating the search for the short-lived isotope Sn-126. This sample set shows no evidence of live Sn-126 implying at most minor input of supernova material during the time at which the CAIs formed. However based on the petrology of this sample set combined with the higher than expected concentrations of Sn and Te as well as the lack of nucleosynthetic anomalies in other isotopes of Te suggest that the bulk of the Sn and Te recovered from these particular refractory inclusions is not of primary origin and thus does not represent a primary signature of Sn-Te systematics of the protosolar nebula during condensation of CAIs or their precursors. Although no evidence of supernova input was found based on Sn-Te systematics in this sample set hydride generation represents a powerful tool that can now be used to further explore Te isotope systematics in less altered materials.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

A comprehensive analysis of the performance characteristics of the Mount Laguna solar photovoltaic installation

This paper represents the first comprehensive survey of the Mount Laguna Photovoltaic Installation. The novel techniques used for performing the field tests have been effective in locating and characterizing defective modules. A comparative analysis on the two types of modules used in the array indicates that they have significantly different failure rates, different distributions in degradational space and very different failure modes. A life cycle model is presented to explain a multimodal distribution observed for one module type. A statistical model is constructed and it is shown to be in good agreement with the field data.

Shumka, A.↗

Analysis of the Value Proposition of High-Efficiency, Multijunction Solar Modules for Residential Rooftop Installations

Utilizing detailed bottom-up models, we analyze the potential markets for high-efficiency photovoltaic modules in the United States. We first estimate the fraction of area-constrained residential rooftops that could benefit from increasing the availability of high-efficiency systems. We then model the impact of efficiency on installed system costs in these area-constrained scenarios. Finally, we explore the value proposition of high-efficiency, fixed-tilt micro-concentrator photovoltaic modules in a series of case studies of residential customers, modeling the levelized cost of energy, payback period, and annual bill savings. We find that efficiency can provide significant savings in installed system cost and improve value to the solar system owner. The improvement in value depends on location and the size of the rooftop, as well as the ability of a given technology to collect diffuse light and achieve low module costs.

14 SOLAR ENERGY↗

Solar flare predictions and warnings

The real-time solar monitoring information supplied to support SPARCS-equipped rocket launches, the routine collection and analysis of 3.3-mm solar radio maps, short-term flare forecasts based on these maps, longer-term forecasts based on the recurrence of active regions, and results of the synoptic study of solar active regions at 3.3-mm wavelength are presented. Forecasted flares in the 24-hour forecasts were 81% accurate, and those in the 28-day forecasts were 97% accurate. Synoptic radio maps at 3.3-mm wavelength are presented for twenty-three solar rotations in 1967 and 1968, as well as synoptic flare charts for the same period.

White, K. P., III↗

Solar array electrical performance assessment for Space Station Freedom

Electrical power for Space Station Freedom will be generated by large Photovoltaic arrays with a beginning of life power requirement of 30.8 kW per array. The solar arrays will operate in a Low Earth Orbit (LEO) over a design life of fifteen years. This paper provides an analysis of the predicted solar array electrical performance over the design life and presents a summary of supporting analysis and test data for the assigned model parameters and performance loss factors. Each model parameter and loss factor is assessed based upon program requirements, component analysis, and test data to date. A description of the LMSC performance model, future test plans, and predicted performance ranges are also given.

Smith, Bryan K.↗

Solar array electrical performance assessment for Space Station Freedom

Electrical power for Space Station Freedom will be generated by large photovoltaic arrays with a beginning of life power requirement of 30.8 kW per array. The solar arrays will operate in a Low Earth Orbit (LEO) over a design life of fifteen years. This paper provides an analysis of the predicted solar array electrical performance over the design life and presents a summary of supporting analysis and test data for the assigned model parameters and performance loss factors. Each model parameter and loss factor is assessed based upon program requirements, component analysis and test data to date. A description of the LMSC performance model future test plans and predicted performance ranges are also given.

Smith, Bryan K.↗

Coronal abundances and their variation

This contract supports the investigation of elemental abundances in the solar corona, principally through analysis of high-resolution soft x ray spectra from the Flat Crystal Spectrometer on NASA's Solar Maximum Mission. The goals of the study are a characterization of the mean values of relative abundances of elements accessible in the FCS data, and information on the extent and circumstances of their variability. A summation of the data analysis and reporting activities which occurred during the months of June to December 1993 is reported.

Saba, Julia L. R.↗

Spectral evolution of multiply impulsive solar bursts

Some results from the analysis of a set of multiply impulsive hard X-ray and microwave solar bursts are presented, showing that some bursts can exhibit widely different magnetic-field strengths at different times. Two categories of microwave spectral behavior are identified: those events during which the microwave turnover frequency (MTF) and spectral shape (SS) remain the same from peak to peak, and those during which the MTF and SS change significantly. These categories correspond to two classes of multiply impulsive bursts: those for which the emission can be characterized by a constant magnetic field and therefore a single source region, and those in which groups of component spikes appear to originate in regions of different magnetic-field strengths, corresponding to separate source regions which flare sequentially. With regard to the latter type, examples are presented, the discrete flaring regions are examined, and their spatial separations are estimated.

Karpen, J. T.↗