Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Sim”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Synthesis of Endohedral Fullerene Using ECR Ion Source

We are developing an ECRIS apparatus which is designed for the production of endohedral fullerenes. Our promising approaches to produce the endohedral fullerenes using the ECRIS are the ion-ion collision reaction of fullerenes and the other atom in their mixture plasma and simple ion implantation of atom into fullerene layer. In this study, we tried to synthesize the endohedral nitrogen-fullerenes by ion implantation. N{sup +} beam was irradiated to a fullerene target with a specific energy and dose. As a result, we could observe the peak of N+C{sub 60} from targets after N{sup +} beam irradiation with TOF-SIMS and LDI-TOF-MS.

36 MATERIALS SCIENCE↗

Determination of secondary ion mass spectrometry relative sensitivity factors for polar and non-polar ZnO

Zinc oxide (ZnO) is regarded as a promising material for optoelectronic devices, due to its electronic properties. Solely, the difficulty in obtaining p-type ZnO impedes further progress. In this connection, the identification and quantification of impurities is a major demand. For quantitative information using secondary ion mass spectrometry (SIMS), so-called relative sensitivity factors (RSF) are mandatory. Such conversion factors did not yet exist for ZnO. In this work, we present the determined RSF values for ZnO using primary (ion implanted) as well as secondary (bulk doped) standards. These RSFs have been applied to commercially available ZnO substrates of different surface termination (a-plane, Zn-face, and O-face) to quantify the contained impurities. Although these ZnO substrates originate from the same single-crystal, we observe discrepancies in the impurity concentrations. These results cannot be attributed to surface termination dependent RSF values for ZnO.

36 MATERIALS SCIENCE↗

Post-growth annealing induced change of conductivity in As-doped ZnO grown by radio frequency magnetron sputtering

Arsenic-doped ZnO films were fabricated by radio frequency magnetron sputtering method at a relatively low substrate temperature of 200 deg. C. Post-growth annealing in air was carried out up to a temperature of 1000 deg. C. The samples were characterized by Hall measurement, positron annihilation spectroscopy (PAS), secondary ion mass spectroscopy (SIMS), and cathodoluminescence (CL). The as-grown sample was of n-type and it converted to p-type material after the 400 deg. C annealing. The resulting hole concentration was found to increase with annealing temperature and reached a maximum of 6 x 10{sup 17} cm{sup -3} at the annealing temperature of 600 deg. C. The origin of the p-type conductivity was consistent with the As{sub Zn}(V{sub Zn}){sub 2} shallow acceptor model. Further increasing the annealing temperature would decrease the hole concentration of the samples finally converted the sample back to n-type. With evidence, it was suggested that the removal of the p-type conductivity was due to the dissociation of the As{sub Zn}(V{sub Zn}){sub 2} acceptor and the creation of the deep level defect giving rise to the green luminescence.

36 MATERIALS SCIENCE↗

Structural properties and spatial ordering in multilayered ZnMgTe/ZnSe type-II quantum dot structures

We report the structural properties and spatial ordering of multilayer ZnMgTe quantum dots (QDs) embedded in ZnSe, where sub-monolayer quantities of Mg were introduced periodically during growth in order to reduce the valence band offset of ZnTe QDs. The periodicity, period dispersion, individual layer thickness, and the composition of the multilayer structures were determined by comparing the experimental high resolution x-ray diffraction (HRXRD) spectra to simulated ones for the allowed (004) and quasi-forbidden (002) reflections in combination with transmission electron microscopy (TEM) results. Secondary ion mass spectroscopy (SIMS) profiles confirmed the incorporation of Mg inside the QD layers, and the HRXRD analysis revealed that there is approximately 32% Mg in the ZnMgTe QDs. The presence of Mg contributes to higher scattering intensity of the HRXRD, leading to the observation of higher order superlattice peaks in both the (004) and (002) reflections. The distribution of scattered intensity in the reciprocal space map (RSM) shows that the diffuse scattered intensity is elongated along the q{sub x} axis, indicating a vertical correlation of the dots, which is found to be less defined for the sample with larger periodicity. The diffuse scattered intensity is also found to be weakly correlated along the q{sub z} direction indicating a weak lateral correlation of the dots.

36 MATERIALS SCIENCE↗

Use of Optical Microscopy to Examine Crystallite Nucleation and Growth in Thermally Annealed Plasma Enhanced Chemical Vapor Deposition and Hot Wire Chemical Vapor Deposition a-Si:H Films

We report a simple method to investigate crystallite nucleation and growth in stepwise, thermally annealed plasma enhanced chemical vapor deposition and hot wire chemical vapor deposition a-Si:H films. By confining film thicknesses to the range 500-4000 {angstrom}, optical microscopy in the reflection mode can be used to readily detect crystallites in the thermally annealed a-Si:H lattice. Measurements of the crystallite density versus annealing time for identically prepared films of different thickness show that the crystallite nucleation rate is smaller for thinner films, suggesting that crystallite nucleation is homogeneous, in agreement with previous results. A comparison of film nucleation rates with those obtained by other methods on identically prepared films shows excellent agreement, thus establishing the validity of the current technique. The potential effect of impurity (oxygen) incorporation during the stepwise annealing in air is shown not to affect crystallite nucleation and growth, in that SIMS oxygen profiles for stepwise versus continuous annealing show not only similar impurity profiles but also similar bulk impurity densities.

14 SOLAR ENERGY↗

Resonant inelastic x-ray scattering of CeB[subscript 6] at the Ce L[subscript 1]- and L[subscript 3]-edges

We report a resonant inelastic x-ray scattering (RIXS) study of crystalline CeB{sub 6}. Ce L{sub {alpha}1,2} RIXS was measured with excitation energies resonant with the Ce L{sub 3}-edge. A lifetime-broadening suppressed x-ray absorption near-edge structure (LBS-XANES), which successfully reproduced the L{sub {alpha}1,2} RIXS spectra over wide ranges of excitation and emission energies, was simulated using the SIM-RIXS program. A pre-edge structure in the LBS-XANES can be resolved, and many-body effects were suggested in the L{sub {alpha}1,2} RIXS around the Ce L{sub 3}-edge energy. No convincing signs of Ce (II) or Ce (IV) states were observed in the LBS-XANES. Ce L{sub {gamma}4} RIXS was measured at 302 K and 28 K with excitation energies across the Ce L{sub 1}-edge. The interactions of p-valence electrons between Ce and B{sub 6} were found to be considerably small, regardless of temperature. Thus, the electronic state of CeB{sub 6} was concluded to be suitably described as a nominally Ce(4f{sup 1}){sup 3+}(e{sup -})(B{sub 6}){sup 2-} system with some hybridization among all valence orbitals of Ce and B.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The effect of PECVD plasma decomposition on the wettability and dielectric constant changes in silicon modified DLC films for potential MEMS and low stiction applications

We have carried out investigations aimed at understanding the mechanism responsible for a water contact angle increase of up to ten degrees and a decrease in dielectric constant in silicon modified hydrogenated amorphous carbon films compared to unmodified hydrogenated amorphous carbon films. Our investigations based on surface chemical constituent analysis using Raman spectroscopy, x-ray photoelectron spectroscopy (XPS), SIMS, FTIR, contact angle / surface energy measurements and spectroscopic ellipsometry suggests the presence of hydrophobic chemical entities on the surface of the films. This observation is consistent with earlier theoretical plasma chemistry predictions and observed Raman peak shifts in the films. These surface hydrophobic entities also have a lower polarizability than the bonds in the un-modified films thereby reducing the dielectric constant of the silicon modified films measured by spectroscopic ellipsometry. Ellipsometric dielectric constant measurement is directly related to the surface energy through Hamaker's constant. Our current finding is expected to be of benefit to understanding stiction, friction and lubrication in areas that range from nano-tribology to microfluidics.

36 MATERIALS SCIENCE↗

Simulation of BF{sub 3} plasma immersion ion implantation into silicon

Plasma immersion ion implantation from a BF{sub 3} plasma into crystalline (100) silicon was performed using the PULSION plasma doping tool. Implanted boron profiles were measured with the SIMS method and simulated using models with different levels of sophistication. The physical implantation model is based on an analytical energy distribution for ions from the plasma and uses a Monte-Carlo simulation code. An analytical model of plasma immersion ion implantation that assumes a uniform and isotropic implantation was implemented in a software module called IMP3D. The functionality of this module which was initially envisaged for the three-dimensional simulation of conventional ion implantation was extended to plasma immersion ion implantation and examples of 2D and 3D simulations from this are presented.

36 MATERIALS SCIENCE↗

Modeling boron profiles in silicon after pulsed excimer laser annealing

In this work, we investigated four possible mechanisms which were candidates to explain the shape of boron profiles after ion implantation and melting excimer laser annealing in silicon. A laser with a wavelength of 308 nm and a pulse duration of {approx}180 ns was used. To simulate this process, an existing model for the temperature and phase evolution was complemented with equations for the migration of dopants. Outdiffusion, thermodiffusion, segregation, and adsorption were investigated as possible mechanisms. As a result, we found that outdiffusion and segregation can be excluded as major mechanisms. Thermodiffusion as well as adsorption could both reproduce the build-up at low melt depths, but only adsorption the one at deeper melt depths. In both cases, ion beam mixing during SIMS measurement had to be taken into account to reproduce the measured profiles.

36 MATERIALS SCIENCE↗

Angle performance on optima MDxt

Angle control on medium current implanters is important due to the high angle-sensitivity of typical medium current implants, such as halo implants. On the Optima MDxt, beam-to-wafer angles are controlled in both the horizontal and vertical directions. In the horizontal direction, the beam angle is measured through six narrow slits, and any angle adjustment is made by electrostatically steering the beam, while cross-wafer beam parallelism is adjusted by changing the focus of the electrostatic parallelizing lens (P-lens). In the vertical direction, the beam angle is measured through a high aspect ratio mask, and any angle adjustment is made by slightly tilting the wafer platen prior to implant. A variety of tests were run to measure the accuracy and repeatability of Optima MDxt's angle control. SIMS profiles of a high energy, channeling sensitive condition show both the cross-wafer angle uniformity, along with the small-angle resolution of the system. Angle repeatability was quantified by running a channeling sensitive implant as a regular monitor over a seven month period and measuring the sheet resistance-to-angle sensitivity. Even though crystal cut error was not controlled for in this case, when attributing all Rs variation to angle changes, the overall angle repeatability was measured as 0.16 Degree-Sign (1{sigma}). A separate angle repeatability test involved running a series of V-curves tests over a four month period using low crystal cut wafers selected from the same boule. The results of this test showed the angle repeatability to be <0.1 Degree-Sign (1{sigma}).

43 PARTICLE ACCELERATORS↗

Low temperature oxidation mechanisms of nanocrystalline magnetite thin film

A detailed investigation of the mechanisms related to the low temperature oxidation of nanocrystalline magnetite thin films into maghemite is presented. Despite strong differences in the functional properties of these two phases, structural similarities make it difficult to distinguish between them, and to quantify the oxidation process, particularly in the case of nanostructured polycrystalline layers. Contrary to the case of bulk materials or monocrystalline films and particles, the oxidation processes in nanocrystalline thin film have only scarcely been studied. In this work, structural and optical techniques, including X-ray diffraction (XRD), EXAFS/X-ray absorption near edge structure, FTIR, and Raman scattering, have been used to estimate the oxidation rate of magnetite. The overall oxidation reaction rates are discussed in the framework of two limiting cases corresponding to intra grain diffusion and to grain boundary diffusion. SIMS profiling and electrical measurements were also carried out to better assess the oxidation quantification in order to conclude on the predominant oxidation mechanisms in this heterogeneous material. We propose a qualitative model for the structure, in terms of insulating zone distribution, for partially oxidized films.

36 MATERIALS SCIENCE↗

Activation studies of NEG coatings by surface techniques

NEG (Non Evaporable Getters)materials in the form of ternary alloy coatings have many benefits compare to traditional bare surfaces such as Extreme high vacuum(XHV), lower secondary electron yield(SEY), low photon desorption cofficient. The extreme high vacuum (pressure > 10{sup -10} mbar) is very useful to the study of surfaces of the material, for high energy particle accelerators(LHC, Photon Factories), synchrotrons (ESRF, Ellectra) etc. Low secondary electron yield leads to better beam life time. In LHC the pressure in the interaction region of the two beams is something of the order of 10{sup -12} mbar. In this paper preparation of the coatings and their characterization to get the Activation temperature by using the surface techniques XPS, SEM and SIMS has been shown.

36 MATERIALS SCIENCE↗

A new endstation at the Swiss Light Source for ultraviolet photoelectron spectroscopy, X-ray photoelectron spectroscopy, and X-ray absorption spectroscopy measurements of liquid solutions

A new liquid microjet endstation designed for ultraviolet (UPS) and X-ray (XPS) photoelectron, and partial electron yield X-ray absorption (XAS) spectroscopies at the Swiss Light Source is presented. The new endstation, which is based on a Scienta HiPP-2 R4000 electron spectrometer, is the first liquid microjet endstation capable of operating in vacuum and in ambient pressures up to the equilibrium vapor pressure of liquid water at room temperature. In addition, the Scienta HiPP-2 R4000 energy analyzer of this new endstation allows for XPS measurements up to 7000 eV electron kinetic energy that will enable electronic structure measurements of bulk solutions and buried interfaces from liquid microjet samples. The endstation is designed to operate at the soft X-ray SIM beamline and at the tender X-ray Phoenix beamline. The endstation can also be operated using a Scienta 5 K ultraviolet helium lamp for dedicated UPS measurements at the vapor-liquid interface using either He I or He II α lines. The design concept, first results from UPS, soft X-ray XPS, and partial electron yield XAS measurements, and an outlook to the potential of this endstation are presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evidence of impurity assisted tunneling in SiGe/Si heterostructures

The investigation of vertical transport in delta-doped SiGe/Si heterostructures has been presented. The asymmetrical triple barrier structure was grown by MBE technique. The delta layer of boron impurity was placed into the center of narrower quantum well. The growth procedure was followed by conventional processing including photolithography and plasma etching and magnetron sputtering. SIMS and X-rays diagnostics have been used to control the desired structure. The conductance of the structure has been measured at liquid helium temperature and analyzed. All pronounced resonances have been identified. The resonant feature near 60 mV has to be attributed to impurity-assisted tunneling that is supported by calculation of binding energy of the acceptor in the narrower quantum well.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phonon-magnon interactions in body centered cubic iron: A combined molecular and spin dynamics study

Combining an atomistic many-body potential with a classical spin Hamiltonian parameterized by first principles calculations, molecular-spin dynamics computer simulations were performed to investigate phonon-magnon interactions in body centered cubic iron. Results obtained for spin-spin and density-density dynamic structure factors show that noticeable softening and damping of magnon modes occur due to the presence of lattice vibrations. Furthermore, as a result of the phonon-magnon coupling, additional longitudinal spin wave excitations are observed, with the same frequencies as the longitudinal phonon modes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

InGaAs tunnel diodes for the calibration of semi-classical and quantum mechanical band-to-band tunneling models

Promising predictions are made for III-V tunnel-field-effect transistor (FET), but there is still uncertainty on the parameters used in the band-to-band tunneling models. Therefore, two simulators are calibrated in this paper; the first one uses a semi-classical tunneling model based on Kane's formalism, and the second one is a quantum mechanical simulator implemented with an envelope function formalism. The calibration is done for In{sub 0.53}Ga{sub 0.47}As using several p+/intrinsic/n+ diodes with different intrinsic region thicknesses. The dopant profile is determined by SIMS and capacitance-voltage measurements. Error bars are used based on statistical and systematic uncertainties in the measurement techniques. The obtained parameters are in close agreement with theoretically predicted values and validate the semi-classical and quantum mechanical models. Finally, the models are applied to predict the input characteristics of In{sub 0.53}Ga{sub 0.47}As n- and p-lineTFET, with the n-lineTFET showing competitive performance compared to MOSFET.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Operation of an ungated diamond field-emission array cathode in a L-band radiofrequency electron source

We report on the operation of a field-emitter-array cathode in a conventional L-band radio-frequency electron source. The cathode consisted of an array of ∼10{sup 6} diamond tips on pyramids. Maximum current on the order of 15 mA was reached and the cathode did not show appreciable signs of fatigue after weeks of operation. The measured Fowler-Nordheim characteristics, transverse beam density, and current stability are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal evolution of defects in undoped zinc oxide grown by pulsed laser deposition

Undoped ZnO films are grown by pulsed laser deposition on c-plane sapphire with different oxygen pressures. Thermal evolutions of defects in the ZnO films are studied by secondary ion mass spectroscopy (SIMS), Raman spectroscopy, and positron annihilation spectroscopy (PAS), and with the electrical properties characterized by the room temperature Hall measurement. Oxygen deficient defect related Raman lines 560 cm{sup −1} and 584 cm{sup −1} are identified and their origins are discussed. Thermal annealing induces extensive Zn out-diffusion at the ZnO/sapphire interface and leaves out Zn-vacancy in the ZnO film. Two types of Zn-vacancy related defects with different microstructures are identified in the films. One of them dominates in the samples grown without oxygen. Annealing the sample grown without oxygen or growing the samples in oxygen would favor the Zn-vacancy with another microstructure, and this Zn-vacancy defect persists after 1100 °C annealing.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗