Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STRUCTURAL MODELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Characterization of potassium salts of 12-tungstophosphoric acid

Potassium salts of 12-tungstophosphoric acid with varying amounts of cation, K{sub x}H{sub 3-x}PW{sub 12}O{sub 40} (x = 1, 2, 3) have been prepared and their characteristics investigated by thermal analyses, FT-IR and micro-Raman spectroscopy and SEM-EDS analysis. It was found that the number of replaced protons by potassium ions in the 12-tungstophosphoric acid structure has influence on the presence of different protonic species, their dynamic equilibrium and on the conductivity of salts. The results reported in this study have been applied to improve the structural model of insoluble acidic salts. It is shown that an acidic potassium salt presents a mixture of neutral salt and unreacted acid. The nature of this mixture depends on the number of replaced protons-oxonium ions by cations. Preliminary measurements with synthesized compounds as solid electrolytes in fuel cells have been done, too.

36 MATERIALS SCIENCE↗

Solution Structures of 2 : 1 And 1 : 1 DNA Polymerase - DNA Complexes Probed By Ultracentrifugation And Small-Angle X-Ray Scattering

We report small-angle X-ray scattering (SAXS) and sedimentation velocity (SV) studies on the enzyme-DNA complexes of rat DNA polymerase {beta} (Pol {beta}) and African swine fever virus DNA polymerase X (ASFV Pol X) with one-nucleotide gapped DNA. The results indicated formation of a 2 : 1 Pol {beta}-DNA complex, whereas only 1 : 1 Pol X-DNA complex was observed. Three-dimensional structural models for the 2 : 1 Pol {beta}-DNA and 1 : 1 Pol X-DNA complexes were generated from the SAXS experimental data to correlate with the functions of the DNA polymerases. The former indicates interactions of the 8 kDa 5{prime}-dRP lyase domain of the second Pol {beta} molecule with the active site of the 1 : 1 Pol {beta}-DNA complex, while the latter demonstrates how ASFV Pol X binds DNA in the absence of DNA-binding motif(s). As ASFV Pol X has no 5{prime}-dRP lyase domain, it is reasonable not to form a 2 : 1 complex. Based on the enhanced activities of the 2 : 1 complex and the observation that the 8 kDa domain is not in an optimal configuration for the 5{prime}-dRP lyase reaction in the crystal structures of the closed ternary enzyme-DNA-dNTP complexes, we propose that the asymmetric 2 : 1 Pol {beta}-DNA complex enhances the function of Pol {beta}.

36 MATERIALS SCIENCE↗

Relation between the Electronic Properties and Structure of InAs/GaAs Quantum Dots Grown by Vapor-Phase Epitaxy

On the basis of a comprehensive study of the structural and electronic properties of InAs/GaAs quantum dots grown by vapor-phase epitaxy at atmospheric pressure, a structural model of the quantum dots as three truncated pyramids adjoined at their bases is chosen. The model takes into account the diffusive smearing of the composition near the base and lateral surface as well as the segregation of indium near the vertex. It is established that the wave functions of charge carriers in the ground state are localized in a comparatively small region of the quantum dot near its vertex.

36 MATERIALS SCIENCE↗

Crystal chemistry of the Pmnb polymorph of Li{sub 2}MnSiO{sub 4}

The crystal structure of the Pmnb polymorph of Li{sub 2}MnSiO{sub 4} (prepared by solid-state synthesis in argon at 900 Degree-Sign C) is characterized by Rietveld refinement of structural models using high resolution synchrotron X-ray and neutron powder diffraction data. The crystal structure is confirmed to be isostructural with Li{sub 2}CdSiO{sub 4} with lattice parameters a=6.30694(3), b=10.75355(4), and c=5.00863(2) A, which are in good agreement with previously published data. No evidence was found for mixed lithium/manganese sites. Testing of the material as a cathode in a lithium cell shows that 1.3 lithium ions per formula unit can be extracted on the first charge cycle but very little lithium can be re-inserted. These results are compared with those of other phase-pure Li{sub 2}MnSiO{sub 4} polymorphs. - Graphical abstract: Polyhedral representation of the crystal structure of Li{sub 2}MnSiO{sub 4} in the Pmnb space group. LiO{sub 4}, MnO{sub 4} and SiO{sub 4} tetrahedra are shown in green, purple and blue, respectively. Highlights: Black-Right-Pointing-Pointer A phase-pure sample of the Pmnb polymorph of Li{sub 2}MnSiO{sub 4} was synthesized. Black-Right-Pointing-Pointer Characterized by Rietveld refinement using high resolution synchrotron X-ray and neutron powder diffraction data. Black-Right-Pointing-Pointer Results confirm the proposed Li{sub 2}CdSiO{sub 4}-type model with highly distorted Mn tetrahedra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular-scale structure of uranium(VI) immobilized with goethite and phosphate

The molecular-scale immobilization mechanisms of uranium uptake in the presence of phosphate and goethite were examined by extended X-ray absorption fine structure (EXAFS) spectroscopy. Wet chemistry data from U(VI)-equilibrated goethite suspensions at pH 4-7 in the presence of {approx}100 {micro}M total phosphate indicated changes in U(VI) uptake mechanisms from adsorption to precipitation with increasing total uranium concentrations and with increasing pH. EXAFS analysis revealed that the precipitated U(VI) had a structure consistent with the meta-autunite group of solids. The adsorbed U(VI), in the absence of phosphate at pH 4-7, formed bidentate edge-sharing, {triple_bond}Fe(OH){sub 2}UO{sub 2}, and bidentate corner-sharing, ({triple_bond}FeOH){sub 2}UO{sub 2}, surface complexes with respective U-Fe coordination distances of {approx}3.45 and {approx}4.3 {angstrom}. In the presence of phosphate and goethite, the relative amounts of precipitated and adsorbed U(VI) were quantified using linear combinations of the EXAFS spectra of precipitated U(VI) and phosphate-free adsorbed U(VI). A U(VI)-phosphate-Fe(III) oxide ternary surface complex is suggested as the dominant species at pH 4 and total U(VI) of 10 {micro}M or less on the basis of the linear combination fitting, a P shell indicated by EXAFS, and the simultaneous enhancement of U(VI) and phosphate uptake on goethite. A structural model for the ternary surface complex was proposed that included a single phosphate shell at 3.6 {angstrom} (U-P) and a single iron shell at {approx}4.3 {angstrom} (U-Fe). While the data can be explained by a U-bridging ternary surface complex, ({triple_bond}FeO){sub 2}UO{sub 2}PO{sub 4}, it is not possible to statistically distinguish this scenario from one with P-bridging complexes also present.

54 ENVIRONMENTAL SCIENCES↗

Synthesis, Structural and Electrical properties of Bi{sub 4}Ti{sub 3}O{sub 12} and Bi{sub 3.5}La{sub 0.5}Ti{sub 3}O{sub 12} Ferroelectric ceramics

Polycrystalline ceramic samples of Bi{sub 4}Ti{sub 3}O{sub 12} and the La-doped Bi{sub 3.5}La{sub 0.5}Ti{sub 3}O{sub 12} have been synthesized by standard high temperature solid state reaction method using high purity oxides and carbonates. The effect of lanthanum doping on the structure of Bi{sub 4}Ti{sub 3}O{sub 12} powders was investigated by X-ray diffraction. A better agreement between the observed and calculated X-Ray diffraction pattern was obtained by performing the Rietveld refinement with a structural model using the non centrosymmetric space group Fmmm. Rietveld analysis revealed that with the partial substitution of La on the Bi site increases the a and b lattice parameters and decreases the c parameter. The activation energies calculated from dc conductivities are 1.033 eV and 2.244 eV which shows that La doping increases the resistivity of the material useful for dielectric devices.

36 MATERIALS SCIENCE↗

First-In-Class Small Molecule Inhibitors of the Single-Strand DNA Cytosine Deaminase APOBEC3G

APOBEC3G is a single-stranded DNA cytosine deaminase that comprises part of the innate immune response to viruses and transposons. Although APOBEC3G is the prototype for understanding the larger mammalian polynucleotide deaminase family, no specific chemical inhibitors exist to modulate its activity. High-throughput screening identified 34 compounds that inhibit APOBEC3G catalytic activity. Twenty of 34 small molecules contained catechol moieties, which are known to be sulfhydryl reactive following oxidation to the orthoquinone. Located proximal to the active site, C321 was identified as the binding site for the inhibitors by a combination of mutational screening, structural analysis, and mass spectrometry. Bulkier substitutions C321-to-L, F, Y, or W mimicked chemical inhibition. A strong specificity for APOBEC3G was evident, as most compounds failed to inhibit the related APOBEC3A enzyme or the unrelated enzymes E. coli uracil DNA glycosylase, HIV-1 RNase H, or HIV-1 integrase. Partial, but not complete, sensitivity could be conferred to APOBEC3A by introducing the entire C321 loop from APOBEC3G. Thus, a structural model is presented in which the mechanism of inhibition is both specific and competitive, by binding a pocket adjacent to the APOBEC3G active site, reacting with C321, and blocking access to substrate DNA cytosines.

59 BASIC BIOLOGICAL SCIENCES↗

General Schema for [001] Tilt Grain Boundaries in Dense Packing Cubic Crystals

Atomic resolution Z-contrast images from a series of CeO2 [001] tilt grain boundaries at coincident site lattice (CSL) or near-CSL misorientations can all be explained within a structural unit model. These structural units (which cover all boundaries from 0-90 degrees) show striking similarities to comparable CSL boundaries observed in cubic crystal structures that are also derived from dense packing (fcc metal, rocksalt, perovskite etc). A general model for the structure of grain boundaries in such similarly structured materials systems has been developed that is based on the crystallography of the parent structures. Changes away from these predicted grain boundary symmetries can be interpreted as showing the frustration of symmetry caused by the incorporation of point defects (vacancies and impurities). This general model for grain boundary structures can, in principle, provide a means to infer the structure-property relationships in broad classes of materials.

Environmental Molecular Sciences Laboratory↗

Aluminium substitution in iron(II-III)-layered double hydroxides: Formation and cationic order

The formation and the modifications of the structural properties of an aluminium-substituted iron(II-III)-layered double hydroxide (LDH) of formula Fe{sub 4}{sup II}Fe{sub (2-6y)}{sup III}Al{sub 6y}{sup III} (OH){sub 12} SO{sub 4}, 8H{sub 2}O are followed by pH titration curves, Moessbauer spectroscopy and high-resolution X-ray powder diffraction using synchrotron radiation. Rietveld refinements allow to build a structural model for hydroxysulphate green rust, GR(SO{sub 4}{sup 2-}), i.e. y=0, in which a bilayer of sulphate anions points to the Fe{sup 3+} species. A cationic order is proposed to occur in both GR(SO{sub 4}{sup 2-}) and aluminium-substituted hydroxysulphate green rust when y<0.08. Variation of the cell parameters and a sharp decrease in average crystal size and anisotropy are detected for an aluminium content as low as y=0.01. The formation of Al-GR(SO{sub 4}{sup 2-}) is preceded by the successive precipitation of Fe{sup III} and Al{sup III} (oxy)hydroxides. Adsorption of more soluble Al{sup III} species onto the initially formed ferric oxyhydroxide may be responsible for this slowdown of crystal growth. Therefore, the insertion of low aluminium amount (y{approx}0.01) could be an interesting way for increasing the surface reactivity of iron(II-III) LDH that maintains constant the quantity of the reactive Fe{sup II} species of the material. - Graphical abstract: (a) Crystallographical structure of sulphated green rust: SO{sub 4}{sup 2-} point to the Fe{sup 3+} cations (red) that form an ordered array with the Fe{sup 2+} cations (green). (b) Width and asymmetry of the synchrotron XRD peaks increase rapidly when some Al{sup 3+} species substitute the Fe{sup 3+} cations; z is molar ratio Al{sup 3+}/Fe{sup 3+}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural trends for celestite (SrSO[subscript 4]), anglesite (PbSO[subscript 4]), and barite (BaSO[subscript 4]): Confirmation of expected variations within the SO[subscript 4] groups

The crystal structures of the isostructural orthorhombic sulfates celestite (SrSO{sub 4}), anglesite (PbSO{sub 4}), and barite (BaSO{sub 4}) were refined by Rietveld methods using synchrotron high-resolution powder X-ray diffraction (HRPXRD) data. Their structural model was refined in space group Pbnm. The unit-cell parameters are a = 6.87032(3), b = 8.36030(5), c = 5.34732(1) {angstrom}, and V = 307.139(3) {angstrom}{sup 3} for SrSO{sub 4}; a = 6.95802(1), b = 8.48024(3), c = 5.39754(1) {angstrom}, and V = 318.486(1) {angstrom}{sup 3} for PbSO{sub 4}; and a = 7.15505(1), b = 8.88101(3), c = 5.45447(1) {angstrom}, and V = 346.599(1) {angstrom}{sup 3} for BaSO{sub 4}. The average <M-O> [12] distances are 2.827(1), 2.865(1), and 2.953(1) {angstrom} for SrSO{sub 4}, PbSO{sub 4}, and BaSO{sub 4}, respectively, and their corresponding average <S-O> [4] distances are 1.480(1), 1.477(3), and 1.471(1) {angstrom}. The geometrical features of the SO{sub 4} and MO{sub 12} polyhedra become more symmetrical from SrSO{sub 4} to BaSO{sub 4}. Across the series, the a, b, and c parameters vary non-linearly with increasing V. The radii of the M{sup 2+} cations, rM, <M-O> [12], and <S-O> [4] distances vary linearly with V. These structural trends arise from the effective size of the M{sup 2+} cation (rM: Sr < Pb < Ba) that is coordinated to 12 O atoms.

58 GEOSCIENCES↗

Mineralization of contaminant uranium and leach rates in sediments from Hanford, Washington

Solid-phase characterization of several uranium contaminated sediments from the U.S. Department of Energy’s Hanford Site was used in conjunction with semi-selective extraction analyses and batch and column leach tests to identify the form of uranium in the samples. Results of scanning electron microscopy analyses indicated that the majority of the uranium in the most contaminated sediment was present as discrete uranium phases and possibly co-precipitates with carbonate and iron- and/or aluminum-oxide/hydroxide phases. Molecular probe techniques confirmed the presence of the uranyl ion; structural model fits of the sample spectra were consistent with uranophane, liebigite, and in one case, with a uranium-carbonate adsorption complex on the surface of an iron-(hydr)oxide. Uranium effluent concentrations failed to reach steady-state conditions during long-term column leach tests, indicating that the release of uranium from the sediments was controlled by multi-rate kinetic processes that could be attributed to the different forms of uranium in the samples.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Structural stability and electronic properties of low-index surfaces of SnS

Thin film photovoltaic cells are increasingly important for cost-effective solar energy harvesting. Layered SnS is a promising absorber material due to its high optical absorption in the visible and good doping characteristics. We use first-principles calculations based on density functional theory to study structures of low-index surfaces of SnS using stoichiometric and oxygen-containing structural models, in order to elucidate their possible effect on the efficiency of the photovoltaic device. We find that the surface energy is minimized for the surface with orientation parallel to the layer stacking direction. Compared to stoichiometric surfaces, the oxygen-containing surfaces exhibit fewer electronic states near the band gap. This reduction of near-gap surface states by oxygen should reduce recombination losses at grain boundaries and interfaces of the SnS absorber, and should be beneficial to the efficiency of the solar cell.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Group III Acceptors with Shallow and Deep Levels in Silicon Carbide: ESR and ENDOR Studies

Results of investigations of Group III acceptors (B, Al, and Ga) in crystals of silicon carbide using the most informative electron spin resonance and electron nuclear double resonance methods are presented. Structural models of the acceptors with shallow and deep levels are considered. In addition to the data obtained earlier, studies using high-frequency magnetic resonance were obtained, which allowed revealing orthorhombic deviations from the axial symmetry for the deep acceptors; theoretical analysis explains experimentally found shifts of g factors for the deep acceptors arising due to the orthorhombic deviations, which appear probably due to the Jahn–Teller effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ordered ferrimagnetic form of ferrihydrite reveals links among structure, composition, and magnetism

The natural nanomineral ferrihydrite is an important component of many environmental and soil systems and has been implicated as the inorganic core of ferritin in biological systems. Knowledge of its basic structure, composition, and extent of structural disorder is essential for understanding its reactivity, stability, and magnetic behavior, as well as changes in these properties during aging. Here we investigate compositional, structural, and magnetic changes that occur upon aging of '2-line' ferrihydrite in the presence of adsorbed citrate at elevated temperature. Whereas aging under these conditions ultimately results in the formation of hematite, analysis of the atomic pair distribution function and complementary physicochemical and magnetic data indicate formation of an intermediate ferrihydrite phase of larger particle size with few defects, more structural relaxation and electron spin ordering, and pronounced ferrimagnetism relative to its disordered ferrihydrite precursor. Our results represent an important conceptual advance in understanding the nature of structural disorder in ferrihydrite and its relation to the magnetic structure and also serve to validate a controversial, recently proposed structural model for this phase. In addition, the pathway we identify for forming ferrimagnetic ferrihydrite potentially explains the magnetic enhancement that typically precedes formation of hematite in aerobic soil and weathering environments. Such magnetic enhancement has been attributed to the formation of poorly understood, nano-sized ferrimagnets from a ferrihydrite precursor. Whereas elevated temperatures drive the transformation on timescales feasible for laboratory studies, our results also suggest that ferrimagnetic ferrihydrite could form naturally at ambient temperature given sufficient time.

54 ENVIRONMENTAL SCIENCES↗

Characteristics of Amorphous As{sub 2}S{sub 3} Semiconductor Films Obtained via Spin Coating

Centrifugation is used in fabricating, e.g., films with large areas and/or thicknesses of several micrometers. However, it has yet to be widely employed for chalcogenide compounds, due to their relatively weak solubility in most solvents. Determining the optimum conditions for preparing solutions of chalcogenide compounds and obtaining films via centrifugation is therefore of great interest. Specific features of amorphous arsenic sulfide (As{sub 2}S{sub 3}) films prepared via the centrifugation of solutions in n-butylamine have been studied. These films were characterized by means of X-ray diffraction analysis, IR spectroscopy, atomic-force microscopy and Raman spectroscopy. It was shown that amorphous As{sub 2}S{sub 3} films have a greater elasticity modulus than those of analogous composition produced via thermal evaporation in vacuum, or As{sub 2}S{sub 3} glass. A structural model based on arsenic sulfide clusters whose surfaces are bound by negatively and positively charged ions is used to explain the experimental results obtained in this work. DC measurements show that the amorphous films exhibit semiconductor-type conductivity. Their room temperature conductivity is ~10{sup −15} S/cm, which indicates good dielectric properties. The films are optically transparent starting from the yellow spectral range, making them promising functional materials for engineering applications in optics and photonics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Metal inorganic frameworks : dynamic flexible architecture with extended pore order built from [Se{sub 3}]{sup 2-} linkers and [Re{sub 6}Se{sub 6}Br{sub 8}]{sup 2-} clusters.

A mesostructured chalcogenide built from Chevrel-type clusters [(Re{sub 6}Se{sub 6}Br{sub 2})Br{sub 6}{sup T}]{sup 2-} linked by ditopic [Se{sub 3}]{sup 2-} anions and synthesized in the presence of a cationic surfactant template is reported. This new mesophase, h-C{sub 18}PyReSeBr, exhibits remarkably well ordered hexagonal symmetry from which a reasonable structural model can be deduced on the basis of powder X-ray diffraction as well as pair distribution function (PDF) analysis. Small-angle X-ray scattering (SAXS) analysis shows that h-C{sub 18}PyReSeBr possesses an enormous interfacial area of 477 m{sup 2}/g between the inorganic framework and the guest surfactant cations, which is comparable to that of mesoporous silicas when heavy metals contained in the framework are taken into consideration. The framework of h-C{sub 18}PyReSeBr exhibits great flexibility and responds dynamically to the extraframework cations via an ion-exchange process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of structural and aerodynamic modeling on optimization with flutter constraint

The influences of structural and aerodynamic modeling on multidisciplinary optimization in an aeroelastic environment are not well understood. Therefore, optimizations with flutter and frequency constraints were performed to investigate the effects these modeling factors have on various representative wings. To this end, the Automated Structural Optimization System (ASTROS) was used as a tool to minimize the weight of various fully built-up finite element wing models in subsonic and supersonic flow under given flutter and frequency constraints. First, the performance of the optimization module was tested against results from other codes on a straight and uniform wing widely used for optimization with flutter constraints. Then, fully built-up finite element models of various wings with different aspect ratios were investigated for the influence on the structural optimization for minimum weight of the following modeling factors: finite element selection, structural grid refinement; number of selected modes, retention of breathing modes; selection of reduced frequencies to be used in flutter analysis; aerodynamic panel size and placement; splining of the aerodynamic grid to the structural grid selection of extra points of the structural wing box for splining; and number of constraints to be retained. Knowledge of these influences as well as of the program behavior is important, since optimization can be made more efficient by the selection of reasonable initial models. Also, it was shown previously that modeling has an impact on the results of modal and aeroelastic analyses. Thus, if modeling errors can negatively affect the analyses, a minimum weight optimization can be jeopardized and result in an optimal design that is rather unreliable. In the following, selected results are presented and the influences of some modeling parameters on optimization are pointed out.

Striz, Alfred G.↗