Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STARTING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71
All sourcesNASA NTRSDOE OSTI
DOE OSTI2013

Mitigation and Treatment of Radiation-Induced Thoracic Injury With a Cyclooxygenase-2 Inhibitor, Celecoxib

Purpose: To test whether a cyclooxygenase-2 inhibitor (celecoxib) could reduce mortality resulting from radiation-induced pneumonitis. Methods and Materials: Celecoxib was given to mice twice daily for 40 consecutive days starting on the day of local thoracic irradiation (LTI) or 40 or 80 days later. C3Hf/KamLaw mice were observed for morbidity, and time to death was determined. Results were analyzed using the Cox proportional hazards model. Results: Timing of celecoxib relative to LTI determined efficacy. A significant reduction in time to death was achieved only when celecoxib was started 80 days after LTI, corresponding to the time when pneumonitis is expressed. For these mice the reduction in mortality was quantified as a hazard ratio for mortality of treated vs untreated of 0.36 (95% confidence interval [CI] 0.24-0.53), thus significantly less than 1.0. Correspondingly, the median lethal dose for treated mice (12.9 Gy; 95% CI 12.55-13.25 Gy) was significantly (P=.026) higher than for untreated mice (12.4 Gy; 95% CI 12.2-12.65 Gy). Conclusions: Celecoxib significantly reduced lung toxicity when administered months after LTI when the deleterious effects of radiation were expressed. The schedule-dependent reduction in fatal pneumonitis suggests that celecoxib could be clinically useful by reintroduction of treatment months after completion of radiation therapy. These findings may be important for designing clinical trials using cyclooxygenase-2 inhibitors to treat radiation-induced lung toxicity as a complement to concurrent radiation therapy of lung cancers.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2013

Comparison of Various Online Strategies to Account for Interfractional Variations for Pancreatic Cancer

Purpose: To identify practical techniques to address the large interfractional variations for pancreas irradiation by comparing various used/proposed online strategies. Methods and Materials: The daily computed tomography (CT) images acquired using a respiration-gated in-room CT (CTVision; Siemens) for 10 pancreatic cancer patients treated with image guided radiation therapy (IGRT) were analyzed. The contours of the pancreas and organs at risk on each daily CT set were generated by populating from the planning CT using a deformable registration tool (ABAS; Elekta) with manual editing. Nine online strategies were considered: (1) standard IGRT (ie, IGRT with 0-mm additional margin [AM]); (2) IGRT with 2-mm AM; (3) IGRT with 5-mm AM; (4) IGRT with plan renormalized to maintain 95% planning target volume (PTV) coverage; (5) full-scale reoptimization; (6) reoptimization starting from the original plan; (7) segment aperture morphing (SAM) from the original plan, based on PTV shape change; (8) SAM plus segment weight optimization; and (9) reoptimization starting from the SAM plan. One-way analysis of variance was applied to plan qualities for the 9 strategies to assess statistical significance in difference. Results: The 3 IGRT strategies (1-3) lead to either inadequate PTV coverage or higher doses to critical structures, indicating that the additional margins alone are not adequate to account for the changes. The full-scale reoptimization results in the best plan but requires the delineation of several structures, which is time consuming. The SAM strategy (7) was the fastest one, because it requires delineating only 1 structure (target), and its plan quality was comparable to that for the full-scale reoptimization. Conclusion: Online replanning strategies can lead to either reduced organs-at-risk dose and/or improved target coverage as compared with the current practice of IGRT. The SAM-based online replanning is comparable to full-scale reoptimization and is efficient for practical use.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2014

Predictive Treatment Management: Incorporating a Predictive Tumor Response Model Into Robust Prospective Treatment Planning for Non-Small Cell Lung Cancer

Purpose: We hypothesized that a treatment planning technique that incorporates predicted lung tumor regression into optimization, predictive treatment planning (PTP), could allow dose escalation to the residual tumor while maintaining coverage of the initial target without increasing dose to surrounding organs at risk (OARs). Methods and Materials: We created a model to estimate the geometric presence of residual tumors after radiation therapy using planning computed tomography (CT) and weekly cone beam CT scans of 5 lung cancer patients. For planning purposes, we modeled the dynamic process of tumor shrinkage by morphing the original planning target volume (PTV{sub orig}) in 3 equispaced steps to the predicted residue (PTV{sub pred}). Patients were treated with a uniform prescription dose to PTV{sub orig}. By contrast, PTP optimization started with the same prescription dose to PTV{sub orig} but linearly increased the dose at each step, until reaching the highest dose achievable to PTV{sub pred} consistent with OAR limits. This method is compared with midcourse adaptive replanning. Results: Initial parenchymal gross tumor volume (GTV) ranged from 3.6 to 186.5 cm{sup 3}. On average, the primary GTV and PTV decreased by 39% and 27%, respectively, at the end of treatment. The PTP approach gave PTV{sub orig} at least the prescription dose, and it increased the mean dose of the true residual tumor by an average of 6.0 Gy above the adaptive approach. Conclusions: PTP, incorporating a tumor regression model from the start, represents a new approach to increase tumor dose without increasing toxicities, and reduce clinical workload compared with the adaptive approach, although model verification using per-patient midcourse imaging would be prudent.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2016

Sorafenib Increases Tumor Hypoxia in Cervical Cancer Patients Treated With Radiation Therapy: Results of a Phase 1 Clinical Study

Purpose: Preclinical studies have shown that angiogenesis inhibition can improve response to radiation therapy (RT). The purpose of this phase 1 study was to examine the angiogenesis inhibitor sorafenib in patients with cervical cancer receiving radical RT and concurrent cisplatin (RTCT). Methods and Materials: Thirteen patients with stage IB to IIIB cervical cancer participated. Sorafenib was administered daily for 7 days before the start of standard RTCT in patients with early-stage, low-risk disease and also during RTCT in patients with high-risk disease. Biomarkers of tumor vascularity, perfusion, and hypoxia were measured at baseline and again after 7 days of sorafenib alone before the start of RTCT. The median follow-up time was 4.5 years. Results: Initial complete response was seen in 12 patients. One patient died without achieving disease control, and 4 experienced recurrent disease. One patient with an extensive, infiltrative tumor experienced pelvic fistulas during treatment. The 4-year actuarial survival was 85%. Late grade 3 gastrointestinal toxicity developed in 4 patients. Sorafenib alone produced a reduction in tumor perfusion/permeability and an increase in hypoxia, which resulted in early closure of the study. Conclusions: Sorafenib increased tumor hypoxia, raising concern that it might impair rather than improve disease control when added to RTCT.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2017

Phase 1 Study of Ipilimumab Combined With Whole Brain Radiation Therapy or Radiosurgery for Melanoma Patients With Brain Metastases

Purpose: We performed a phase 1 study to determine the maximum tolerable dose and safety of ipilimumab with stereotactic radiosurgery (SRS) or whole brain radiation therapy (WBRT) in patients with brain metastases from melanoma. Methods and Materials: Based on the intracranial disease burden, patients underwent WBRT (arm A) or SRS (arm B). The ipilimumab starting dose was 3 mg/kg every 3 weeks, starting on day 3 of WBRT or 2 days after SRS. The ipilimumab dose was escalated to 10 mg/kg using a 2-stage, 3+3 design. The primary endpoint was to determine the maximum tolerable dose of ipilimumab combined with radiation therapy. The secondary endpoints were overall survival, intracranial and extracranial control, progression-free survival, and toxicity. The (ClinicalTrials.gov) registration number is (NCT01703507). Results: The characteristics of the 16 patients enrolled between 2011 and 2014 were mean age, 60 years; median number of brain metastases, 2 (range 1->10); and number with EC disease, 13 (81%). Treatment included WBRT (n=5), SRS (n=11), and ipilimumab 3 mg/kg (n=7) or 10 mg/kg (n=9). The median follow-up was 8 months (arm A) and 10.5 months (arm B). A total of 21 grade 1 to 2 neurotoxic effects occurred, with no dose-limiting toxicities. One patient experienced grade 3 neurotoxicity before ipilimumab administration. Ten additional grade 3 toxicities were reported, with gastrointestinal toxicities (n=5; 31%) the most common. No patient developed grade 4 or 5 toxicity. The median progression-free survival and overall survival in arm A was 2.5 months and 8 months and in arm B was 2.1 months and not reached, respectively. Conclusions: Concurrent ipilimumab 10 mg/kg with SRS is safe. The WBRT arm was closed early because of slow accrual but demonstrated safety with ipilimumab 3 mg/kg. No patient experienced dose-limiting toxicity. Larger studies, including those with combination checkpoint inhibitor therapy and SRS, are warranted.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2024

Evaluation of methods for characterizing the fine particulate matter emissions from aircraft and other diffusion flame combustion aerosol sources

The U. S. Environmental Protection Agency in collaboration with the U. S. Air Force Arnold Engineering Development Complex conducted the VAriable Response In Aircraft nvPM Testing (VARIAnT) 3 and 4 test campaigns to compare nvPM emissions measurements from a variety of diffusion flame combustion aerosol sources (DFCASs), including a Cummins diesel engine, a diesel powered generator, two gas turbine start carts, a J85-GE-5 turbojet engine burning multiple fuels, and a Mini-CAST soot generator. The VARIAnT research program has conducted four test campaigns to date with the VARIAnT 3 and 4 test campaigns focusing on BC mass instrument performance, use of gas turbine engine sources for BC mass instrument calibration, and the characterization of the aerosols produced from the combustion sources. Results from both campaigns revealed agreement of about 20% between the AVL Micro-Soot Sensor, the Cavity Attenuated Phase Shift (CAPS PMSSA) monitor and the thermal-optical reference method for elemental carbon (EC), independent of the calibration source used. For the Artium LII-300, the measured mass concentrations in VARIAnT3 fall within 18% and in VARIAnT4 fall within 32% of the reference EC mass concentration when calibrated on a combustor rig in VARIAnT3 and on a LGT-60 start cart in VARIAnT4, respectively. It was also found that the three mass instrument types (MSS, CAPS PMSSA, and LII-300) can exhibit different BC to reference EC ratios depending on the emission source that appear to correlate to particle geometric mean mobility diameter, morphology, or some other parameter associated with particle geometric mean diameter (GMD) with the LII-300 showing a slightly stronger apparent trend with GMD. Systematic differences in LII-300 measured mass concentrations have been reduced by calibrating with a turbine combustion source (combustor or turbine engine). With respect to the particle size measurements made, the sizing instruments (TSI SMPS, TSI EEPS, and Cambustion DMS 500) were found to be in general agreement in terms of size distributions and concentrations with some exceptions. Teflon filter measurements of the total aerosol mass produced by the various DFCASs differed from the reference EC, BC, and integrated particle sized distribution measured aerosol masses. The Teflon filter measured mass was 30 to 40% greater than the reference EC and 50 to 60% greater than the BC mass for the J85 in both test campaigns. The measurements of particle size distributions and single particle analysis by miniSPLAT indicated the presence of large particles (>100 nm) having more compact morphologies, higher effective density, and a composition dominated by OC and ash. This increased large particle fraction is also associated with higher values of single scattering albedo measured by the CAPS PMSSA instrument and higher OC/EC measurements. These measurements indicate gas turbine engine emissions can be a more heterogeneous mix of particle types beyond the original E31 assumption that it is mainly composed of black carbon.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2022

Phosphatidylinositol phosphates modulate interactions between the StarD4 sterol trafficking protein and lipid membranes

There is substantial evidence for extensive nonvesicular sterol transport in cells. For example, lipid transfer by the steroidogenic acute regulator-related proteins (StarD) containing a StarT domain has been shown to involve several pathways of nonvesicular trafficking. Among the soluble StarT domain–containing proteins, StarD4 is expressed in most tissues and has been shown to be an effective sterol transfer protein. However, it was unclear whether the lipid composition of donor or acceptor membranes played a role in modulating StarD4-mediated transport. Here, we used fluorescence-based assays to demonstrate a phosphatidylinositol phosphate (PIP)-selective mechanism by which StarD4 can preferentially extract sterol from liposome membranes containing certain PIPs (especially, PI(4,5)P 2 and to a lesser degree PI(3,5)P2). Monophosphorylated PIPs and other anionic lipids had a smaller effect on sterol transport. This enhancement of transport was less effective when the same PIPs were present in the acceptor membranes. Furthermore, using molecular dynamics (MD) simulations, we mapped the key interaction sites of StarD4 with PIP-containing membranes and identified residues that are important for this interaction and for accelerated sterol transport activity. We show that StarD4 recognizes membrane-specific PIPs through specific interaction with the geometry of the PIP headgroup as well as the surrounding membrane environment. Finally, we also observed that StarD4 can deform membranes upon longer incubations. Taken together, these results suggest a mechanism by which PIPs modulate cholesterol transfer activity via StarD4.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Bayesian and variational Bayesian approaches for flows in heterogeneous random media

In this paper, we study porous media flows in heterogeneous stochastic media. We propose an efficient forward simulation technique that is tailored for variational Bayesian inversion. As a starting point, the proposed forward simulation technique decomposes the solution into the sum of separable functions (with respect to randomness and the space), where each term is calculated based on a variational approach. This is similar to Proper Generalized Decomposition (PGD). Next, we apply a multiscale technique to solve for each term (as in ) and, further, decompose the random function into 1D fields. As a result, our proposed method provides an approximation hierarchy for the solution as we increase the number of terms in the expansion and, also, increase the spatial resolution of each term. We use the hierarchical solution distributions in a variational Bayesian approximation to perform uncertainty quantification in the inverse problem. We conduct a detailed numerical study to explore the performance of the proposed uncertainty quantification technique and show the theoretical posterior concentration.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2018

Identifying arbitrary parameter zonation using multiple level set functions

In this paper, we extended the analytical level set method [1, 2] for identifying a piece-wisely heterogeneous (zonation) binary system to the case with an arbitrary number of materials with unknown material properties. In the developed level set approach, starting from an initial guess, the material interfaces are propagated through iterations such that the residuals between the simulated and observed state variables (hydraulic head) is minimized. We derived an expression for the propagation velocity of the interface between any two materials, which is related to the permeability contrast between the materials on two sides of the interface, the sensitivity of the head to permeability, and the head residual. We also formulated an expression for updating the permeability of all materials, which is consistent with the steepest descent of the objective function. The developed approach has been demonstrated through many examples, ranging from totally synthetic cases to a case where the flow conditions are representative of a groundwater contaminant site at the Los Alamos National Laboratory. These examples indicate that the level set method can successfully identify zonation structures, even if the number of materials in the model domain is not exactly known in advance. Although the evolution of the material zonation depends on the initial guess field, inverse modeling runs starting with different initial guesses fields may converge to the similar final zonation structure. These examples also suggest that identifying interfaces of spatially distributed heterogeneities is more important than estimating their permeability values.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Selective laser melting of oxide dispersion strengthened MA956 alloy and its surface finishing by magnetic field assisted finishing

Selective laser melting (SLM) is a prominent metal additive manufacturing (AM) capable of processing a myriad of engineering materials with high precision and design freedom. However, similar to other AM processes, poor surface finishing has been an omnipresent problem in SLM technology. In this study, magnetic field assisted finishing (MAF) was used to finish SLM fabricated oxide dispersion strengthened (ODS) MA956, an iron-chromium-aluminum alloy. The effect of laser processing parameters on part density and surface roughness was first studied. Using a multi-objective optimization technique, the optimal parameters to obtain the highest density and lowest surface roughness were determined. Finally, MAF was applied to the parts built with the obtained optimal SLM parameters, but without significant improvement on the surfaces of as-printed samples. Hence, the surfaces of as-printed samples were post-processed (ground) to yield better initial surface conditions prior to MAF. The effect of initial roughness, iron particles size, and abrasive size on MAF performance was studied. Initial roughness had the most dominant effect followed by abrasive size. The underlying mechanism behind the dependency on initial roughness on final surface quality was analyzed by studying the change on the surface profiles with different starting initial roughness. The initial roughness required for MAF to be effective was determined. In conclusion, using the optimal processing conditions, MAF was applied to the post-processed samples to attain the final average surface roughness (R a ) as little as 0.36 μm starting from initial average roughness (R a ) of 1.53 μm.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Monte Carlo Simulation of Borosilicate Glass Dissolution using Molecular Dynamics-Generated Glass Structures

Atomic-scale insights into the dissolution mechanisms of borosilicate glasses are critical to the development of the waste form corrosion models that inform performance assessments of nuclear waste disposal facilities. Monte Carlo (MC) simulations have been instrumental in advancing the state of knowledge of borosilicate glass dissolution; however, all such simulations to date have relied on lattices to represent the amorphous glass structure, thereby potentially introducing artifacts. Therefore, a new approach, referred to as the amorphous MC approach, has been developed whereby glass structures generated from molecular dynamics simulations are used as starting points for MC simulations of glass dissolution. MC simulations of sodium borosilicate glasses that covered a wide compositional range were performed and revealed correlations between dissolution rate and structural features of the glasses. Notably, the lattice MC approach predicted the fraction of tetrahedral boron to have a lesser influence on the dissolution rate than computed with the amorphous MC approach. The lattice MC simulations also overestimated the dissolution rate for a given glass composition. These findings highlight the importance of using truly amorphous structures in MC simulations of glass corrosion.

Kerisit, Sebastien N.↗
DOE OSTI2022

Modelling single atom catalysts for water splitting and fuel cells: A tutorial review

Here, in this tutorial review, we report the state-of-the-art of the modeling approaches of Single Atom Catalysts (SAC) for water splitting and fuel cells reactions. The discussion applies for Hydrogen Evolution Reaction (HER), Oxygen Reduction Reaction (OER), Hydrogen Oxidation Reaction (HOR), and Oxygen Reduction Reaction (ORR). The main scope of this work is to underline the relevant aspects of SACs modelling. On the one hand, the review could help computational chemists aiming to start the study of SACs. On the other hand, experimentalists could find the critical analysis of DFT results of interest to understand better the strengths and weaknesses of simulations, and how to interpret computational results. After an introductory section of SACs, we start by briefly presenting the state-of-the-art methodologies. Then, we analyze the critical aspects for a reliable prediction of the electronic properties, and we discuss the robustness of the structural models and ways to validate them. Furthermore, we discuss the main approaches to predict catalytic activity and selectivity, which is the final goal of the computational catalysis. We conclude this review with a critical analysis of the current challenges in the field, and the main limitations of the modeling approaches that are described.

25 ENERGY STORAGE↗
DOE OSTI2011

Effect of Cr and Mn ions on the structure and magnetic properties of GaFeO{sub 3}: Role of the substitution site

Effect of substitution of Cr and Mn in the Fe and Ga sites of GaFeO{sub 3} on the structural parameters and magnetic properties has been investigated by preparing GaFe{sub 1-x}Cr{sub x}(Mn{sub x})O{sub 3} and Ga{sub 1-x}Cr{sub x}(Mn{sub x})FeO{sub 3} starting with appropriate oxide precursors. It is shown that, starting with Cr or Mn substituted Ga{sub 2}O{sub 3}, one obtains Ga{sub 1-x}Cr{sub x}(Mn{sub x})FeO{sub 3}, while reaction of Cr or Mn substituted {alpha}-Fe{sub 2}O{sub 3} with Ga{sub 2}O{sub 3} yields GaFe{sub 1-x}Cr{sub x}(Mn{sub x})O{sub 3}. The structural parameters and magnetic properties vary significantly with the substitution site of Cr showing a large decrease in the unit cell parameters as well as the T{sub C} and other magnetic properties when the substitution is at the octahedral Fe (1, 2) site. Substitution of Cr at the octahedral Ga2 site results in marginal changes. Substitution of Mn in the Ga and Fe sites also show differences although the changes themselves are much smaller. First-principles calculations confirm such site-specificity and show how Cr substitution affects the properties differently when substituted at the Ga2 and Fe1 sites. - Graphical abstract: The important role of site-specific substitution of transition metal ions on the structure and magnetic properties of GaFeO{sub 3} has been investigated experimentally and theoretically. Highlights: > Substitution of transition metal ions to specific cation site. > Ionic radii of the cation dictate the disorder associated with the specific site. > Site-specificity explains magnetic ordering and structural parameters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2012

Pressure response of vacancy ordered maghemite ({gamma}-Fe{sub 2}O{sub 3}) and high pressure transformed hematite ({alpha}-Fe{sub 2}O{sub 3})

Combined XRD and Moessbauer effect spectroscopy studies to high pressures of {approx}30 GPa of vacancy ordered maghemite are presented. The vacancy ordered superstructure is robust and remains intact up to the pressure-induced onset transition to hematite at 13-16 GPa. The pressure transformed hematite is shown to be crystallographically textured, unlike the randomised low pressure maghemite phase. This arises out of a pressure or stress instigated topotactic transformation of the cubic-spinel to hexagonal-corundum structure. The textured sample permits us to obtain information on the spin reorientation behavior of the pressure transformed hematite in compression and decompression sequences. Spin reorientation is restricted to {approx}15 Degree-Sign over wide pressure ranges, attributable to the effect of entrapped vacancies in the high pressure structure. Thus there are structural and magnetic peculiarities specific to pressure transformed hematite not evident in pressurized hematite starting material. These are triggered by the maghemite{yields}hematite transformation. - Graphical abstract: Pressure instigated topotactic transformation of vacancy ordered {gamma}-Fe{sub 2}O{sub 3}{yields}{alpha}-Fe{sub 2}O{sub 3}. There is restricted spin (B{sub hf}) reorientation in the new pressure transformed hematite due to entrapped vacancies. The change in direction of V{sub zz} signifies a distortion of the FeO{sub 6} octahedral local environment. Highlights: Black-Right-Pointing-Pointer Robust vacancy ordered superstructure in maghemite to high pressures. Black-Right-Pointing-Pointer Pressure instigated topotactic transformation to hematite and subsequent texture. Black-Right-Pointing-Pointer Defect trapping in the pressure transformed hematite. Black-Right-Pointing-Pointer Entrapped defects restricts spin reorientation in pressure transformed hematite. Black-Right-Pointing-Pointer Contrasting behavior with pressurized hematite starting material.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2012

Mo{sub x}Cu{sub 1-x}Sr{sub 2}YCu{sub 2}O{sub y} (0.3{<=}x{<=}1) revisited: Superconductivity, magnetism and the molybdenum oxidation state

A systematic study is reported on the range of stability of molybdenum substituted Sr-based 123 compounds with Mo-Sr-Y-Cu system, synthesized under ambient pressure. All materials crystallize in the space group: P4/mmm and the observed solubility limit of Mo is rather low in this structure because secondary phases start to form as soon as x>0.3 in nominal composition is reached. The antiferromagnetic property in all superconducting multiphase samples can be attributed to the secondary phase Y{sub 2}Cu{sub 2}O{sub 5}. The influence of oxygen annealing on the changes in electronic structure for the pure Mo{sub 0.3}Cu{sub 0.7}Sr{sub 2}YCu{sub 2}O{sub y} system associated with a non-superconductor to superconductor transition has been investigated by means of X-ray photoelectron spectroscopy, powder X-ray diffraction, magnetic susceptibility and specific-heat measurements. We unambiguously show the predominance of the Mo{sup 5+} state over the Mo{sup 6+} one on both as-synthesized and annealed phases; annealing under an oxygen atmosphere enhances both the Mo{sup 6+} and Cu{sup 2+} amounts. We suggest that the enhancement of Mo{sup 6+} under oxygen annealing is in close relation with the decrease in the O 2p{yields}Cu 3d charge-transfer energy resulting in superconducting properties. - Graphical abstract: A study on the ambient-pressure synthesis and the range of stability of complex perovskites in the system Y-Sr-Cu-Mo shows that the solubility limit of Mo is rather low in this structure ({approx}30%). Secondary phases (detected by XRD) start to form for x>0.3 in nominal composition. All materials crystallize in the space group: P4/mmm. Antiferromagnetism in all superconducting multiphase samples is attributed to the secondary phase Y{sub 2}Cu{sub 2}O{sub 5}. Pure Mo{sub 0.3}Cu{sub 0.7}Sr{sub 2}YCu{sub 2}O{sub y} studied by means of powder X-ray diffraction, magnetic susceptibility and specific-heat measurements. Changes in electronic structure for the pure Mo{sub 0.3}Cu{sub 0.7}Sr{sub 2}YCu{sub 2}O{sub y} system associated with a non-superconductor to superconductor transition have been investigated by means of X-ray photoelectron spectroscopy (XPS). Highlights: Black-Right-Pointing-Pointer Solubility limit of Mo is rather low in Mo{sub x}Cu{sub 1-x}Sr{sub 2}YCu{sub 2}O{sub y} (x{approx}0.3). Black-Right-Pointing-Pointer Antiferromagnetism and superconductivity do not coexist. Black-Right-Pointing-Pointer Pure Mo{sub 0.3}Cu{sub 0.7}Sr{sub 2}YCu{sub 2}O{sub y} (T{sub c} Almost-Equal-To 30 K) prepared and characterized. Black-Right-Pointing-Pointer XPS shows that Mo{sup 5+} predominates over Mo{sup 6+}. Black-Right-Pointing-Pointer Annealing under O{sub 2} enhances Mo{sup 6+} and Cu{sup 2+} states.

36 MATERIALS SCIENCE↗
DOE OSTI2013

Synthesis of nanostructured AlN by solid state reaction of Al and diaminomaleonitrile

The solid state reaction of diaminomaleonitrile (DAMN) with aluminum via both mechanochemical and thermal treatment routes was studied by X-ray diffraction and Fourier transform infrared spectroscopy. During the milling process, the reaction starts with the deammoniation of the DAMN molecules, followed by the formation of nanostructured AlN powder as the main solid product after milling for 7 h. The reactivity of the mixed powder was also investigated during the conventional thermal treatment process using differential scanning calorimetry, derivative thermogravimetry and thermogravimetric analysis. The results reveal that DAMN starts to polymerize at 192 Degree-Sign C by the elimination of the amine groups. Furthermore, increasing the annealing temperature leads to the formation of a nitrogen-containing carbonaceous material with the structure similar to non-crystalline carbon. However, no evidence for the formation of AlN was observed in the annealed samples even at temperatures as high as the Al melting point. - Graphical abstract: AlN nanoparticles obtained after milling of Al and diaminomaleonitrile (DAMN) for 12 h. Highlights: Black-Right-Pointing-Pointer Solid state reaction of diaminomaleonitrile (DAMN) with Al was studied via mechanochemical and thermal treatment routs. Black-Right-Pointing-Pointer Nanocrystalline AlN was successfully synthesized by the mechanochemical process. Black-Right-Pointing-Pointer The C/N material was formed by polymerization of DAMN during the thermal treatment process. Black-Right-Pointing-Pointer No reaction between DAMN and Al was detected during the thermal treatment method.

36 MATERIALS SCIENCE↗
DOE OSTI2013

New ternary phosphides and arsenides. Syntheses, crystal structures, physical properties of Eu{sub 2}ZnP{sub 2}, Eu{sub 2}Zn{sub 2}P{sub 3} and Eu{sub 2}Cd{sub 2}As{sub 3}

Three new europium pnictides Eu{sub 2}ZnP{sub 2}, Eu{sub 2}Zn{sub 2}P{sub 3} and Eu{sub 2}Cd{sub 2}As{sub 3} have been synthesized and their structures were determined by single-crystal X-ray diffraction. Eu{sub 2}ZnP{sub 2} is isotypic with Yb{sub 2}CdSb{sub 2} (Cmc2{sub 1} (No. 36); cell parameters a=4.1777(7) Å, b=15.925(3) Å, c=7.3008(12) Å), while the latter two compounds crystallize with the Ba{sub 2}Cd{sub 2}Sb{sub 3} structure type (C2/m (No. 12); cell parameters a=15.653(5)/16.402(1) Å, b=4.127(1)/4.445(4) Å, c=11.552(4)/12.311(1) Å and β=126.647(4)/126.515(7)° for Eu{sub 2}Zn{sub 2}P{sub 3} and Eu{sub 2}Cd{sub 2}As{sub 3}, respectively). Magnetic susceptibility measurements in the interval 5–300 K confirm paramagnetic behavior and effective magnetic moments characteristic of Eu{sup 2+} ([Xe] 4f{sup 7}) ground states. Temperature-dependent electrical conductivity measurements also prove that Eu{sub 2}Cd{sub 2}As{sub 3} is a semiconducting compound with a narrow band gap of 0.059 eV below 100 K. According to TG/DSC analyses, Eu{sub 2}Cd{sub 2}As{sub 3} starts to decompose at about 950 K. - Graphical abstract: A polyhedral view of the crystal structure of new pnictides Eu{sub 2}T{sub 2}Pn{sub 3} (T=Zn or Cd; Pn=P or As). Display Omitted - Highlights: • Three new ternary pnictide Zintl compounds, Eu{sub 2}ZnP{sub 2}, Eu{sub 2}Zn{sub 2}P{sub 3} and Eu{sub 2}Cd{sub 2}As{sub 3}, have been synthesized and characterized. • The europium cations are divalent and ferromagnetically coupled in both Eu{sub 2}Zn{sub 2}P{sub 3} and Eu{sub 2}Cd{sub 2}As{sub 3}. • Eu{sub 2}Cd{sub 2}As{sub 3} has a very small band gap of 0.06 eV and starts to decompose over 950 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

Effect of MoS{sub 2} on hydrogenation storage properties of LiBH{sub 4}

The hydrogen storage properties of LiBH{sub 4} ball milled with 20 wt% MoS{sub 2} have been investigated. It shows that the LiBH{sub 4} doped with MoS{sub 2} exhibits favorable hydrogenation and dehydrogenation properties in terms of decomposition temperature and hydriding/dehydriding reversibility. The sample with MoS{sub 2} starts to release hydrogen at 230 °C and has a decrease of 80 °C in contrast with pristine LiBH{sub 4}. Furthermore, for the second cycle, the LiBH{sub 4} with MoS{sub 2} maintains a reversible hydrogen storage capacity of about 8.0 wt% which is almost identical with the first cycle under 5 MPa at 550 °C. Analyzed by the XRD and the FTIR results, LiBH{sub 4} can be regenerated after re-hydrogenation under a relatively mild condition by adding MoS{sub 2}. The improvement of the hydrogenation and dehydrogenation properties mainly results from the formation of Li{sub 2}S and MoB{sub 2} during ball milling. -- Graphical abstract: Hydrogen absorption curves of LiBH{sub 4} doped with MoS{sub 2} for five cycles at 400 °C. Highlights: • The hydrogen absorption capacity is nearly the same for 5 cycles at 400 °C. • The sample with MoS{sub 2} starts to release hydrogen at 230 °C. • The coexistence of MoB{sub 2} and Li{sub 2}S catalyzes the decomposition of LiBH{sub 4}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗