Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Robust control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71
All sourcesNASA NTRSDOE OSTI
NASA NTRS2012

On the Robustness Properties of M-MRAC

The paper presents performance and robustness analysis of the modified reference model MRAC (model reference adaptive control) or M-MRAC in short, which differs from the conventional MRAC systems by feeding back the tracking error to the reference model. The tracking error feedback gain in concert with the adaptation rate provides an additional capability to regulate not only the transient performance of the tracking error, but also the transient performance of the control signal. This differs from the conventional MRAC systems, in which we have only the adaptation rate as a tool to regulate just the transient performance of the tracking error. It is shown that the selection of the feedback gain and the adaptation rate resolves the tradeoff between the robustness and performance in the sense that the increase in the feedback gain improves the behavior of the adaptive control signal, hence improves the systems robustness to time delays (or unmodeled dynamics), while increasing the adaptation rate improves the tracking performance or systems robustness to parametric uncertainties and external disturbances.

Stepanyan, Vahram↗
NASA NTRSDate not supplied

Design of a Collocation-Based Active Flutter Suppression Control Law for the IAWTM Wind Tunnel Model

The design of an active flutter suppression (AFS) control law for upcoming wind tunnel tests in the Transonic Dynamics Tunnel (TDT) at the NASA Langley Research Center (LaRC) with the Integrated Adaptive Wing Technology Maturation (IAWTM) project is presented. The test article is a highly flexible half-span model of a transport airplane and tests will focus on the transonic regime. The control law is based on the concept of collocation, sometimes called identically located accelerometer and force (ILAF), which uses local velocity feedback to increase damping for all aeroelastic modes. A multiple-input multiple-output (MIMO) extension of this architecture is used for performance and robustness improvements. Results showed that the proposed control law with three fixed gains stabilized the design models over most of the test envelope and successfully extended the open-loop flutter boundary to higher Mach numbers and dynamic pressures.

Active flutter suppression↗
NASA NTRS2025

A Minority Report Submitted as an Addendum to the Report of the Mars 2020 Organic Contamination Panel

This Minority Report (MR) presents seven findings in addition to or contrary to the main OCP report: 1. Contamination control for the Mars 2020 cache must be strict. Mars’ surface is known to be organics-poor from laboratory studies, Mars meteorite analyses, and from four previous NASA missions. It is imperative that contamination control measures are enacted that enable reliable and robust detection of potential biomarker compounds at the ppb level. 2. Since Mars 2020 is a sample return mission and analyses of samples in the returnable cache are expected to occur after return to Earth, positive controls are not recommended for flight on Mars 2020 unless a compelling case can be made for their use. 3. The findings of previous panels dedicated to organic compound analysis in Martian samples (OCSSG, ND-SAG, SDT) recommend TOC limits between 10-40 ppb. The MR finds that the lower limit of 10 ppb is recommended and that insufficient justification is given by the OCP Panel Report (PR) to raise the TOC limit to 40 ppb. 4. Analytical capability is sufficiently advanced that analytical capability is an irrelevant consideration with respect to differentiating between 10 and 40 ppb TOC. 5. Perceived contamination control challenges are an irrelevant consideration for raising the TOC contamination limit from 10 to 40 ppb since those challenges, and the procedures to ameliorate them, will exist regardless of whether the limit is 10 or 40 ppb. 6. The “dilution cleaning” method has not been adequately proven for utilization on the Mars 2020 mission. Shortcomings have been identified in terms of peer review, method verification, analytical and testing approach, application to space flight hardware, and performance under Martian conditions. The method should be revisited and independently tested using statistically and analytically robust methods, and scrutinized in a rigorous peer review process. 7. The Mars 2020 mission claims considerable heritage from the Mars Science Laboratory (MSL) mission, but MSL contamination control efforts contain significant errors and implementation discrepancies that would imperil the Mars 2020 caching mission were they repeated. A standing contamination control panel should be formed to provide independent oversight for the Mars 2020 mission.

Mars Sample Return↗
NASA NTRS2003

Control in Unmanned NASA Missions

This viewgraph presentation reviews several general aspects of control for NASA space missions. Included in the review are the Entry, Descent and Landing (EDL) for both Mars Exploration Rover (MER), and Mars Science Laboratory (MSL); and the control of the MER Rover. Also included is discussion about control issues in relation to formation flying, adaptive optics and precision wavefront control, sensors for environmental control- ENose. Essential developments in the areas of control are important for increase in Autonomy/Automation is essential for deep space manned missions. Other areas of concern are robustness and the need to address life support system control issues.

wavefront control↗
NASA NTRS2008

Implementation Challenges for Multivariable Control: What You Did Not Learn in School

Multivariable control allows controller designs that can provide decoupled command tracking and robust performance in the presence of modeling uncertainties. Although the last two decades have seen extensive development of multivariable control theory and example applications to complex systems in software/hardware simulations, there are no production flying systems aircraft or spacecraft, that use multivariable control. This is because of the tremendous challenges associated with implementation of such multivariable control designs. Unfortunately, the curriculum in schools does not provide sufficient time to be able to provide an exposure to the students in such implementation challenges. The objective of this paper is to share the lessons learned by a practitioner of multivariable control in the process of applying some of the modern control theory to the Integrated Flight Propulsion Control (IFPC) design for an advanced Short Take-Off Vertical Landing (STOVL) aircraft simulation.

Garg, Sanjay↗
DOE OSTI2020

Real-time Nonlinear Model Predictive Control (NMPC) Strategies using Physics-Based Models for Advanced Lithium-ion Battery Management System (BMS)

Optimal operation of lithium-ion batteries requires robust battery models for advanced battery management systems (ABMS). A nonlinear model predictive control strategy is proposed that directly employs the pseudo-two-dimensional (P2D) model for making predictions. Using robust and efficient model simulation algorithms developed previously, the computational time of the nonlinear model predictive control algorithm is quantified, and the ability to use such models for nonlinear model predictive control for ABMS is established.

25 ENERGY STORAGE↗
DOE OSTI2026

Controlling Exsolution Dynamics in High‐Entropy Oxides for Highly Active and Selective Acetylene Semi‐Hydrogenation

Exsolution-derived catalysts feature robust metal–support interactions that enhance catalytic performance; yet achieving precise control over exsolution dynamics in multicomponent oxides remains challenging. In this study, we demonstrate that exsolution behavior in high-entropy oxides (HEOs) can be rationally tuned through coupled lattice- and valence-engineering to create a highly active and selective catalyst for acetylene semi-hydrogenation. Incorporation of Li + into a rock salt-structured HEO (LiNiMgCuZnCoO x and LiHEO) induces local lattice distortion, generates oxygen vacancies, and partially oxidizes Co sites from Co 2+ to Co 3+ , collectively modulating local charge redistribution. This strategy enables facilitated Cu nanoparticle exsolution and alters the exsolution sequence from Cu 0 > Ni 0 > Co 0 in pristine HEO to Cu 0 > Co 0 > Ni 0 in the LiHEO. The resulting catalyst via controlled exsolution exhibits superior activity and ethylene selectivity, outperforming state-of-the-art transition metal systems. This work establishes entropy-enabled lattice and valence engineering as a facile route to programmable exsolution for enhanced catalysis.

36 MATERIALS SCIENCE↗
NASA NTRS1995

Biomorphic architectures for autonomous Nanosat designs

Modern space tool design is the science of making a machine both massively complex while at the same time extremely robust and dependable. We propose a novel nonlinear control technique that produces capable, self-organizing, micron-scale space machines at low cost and in large numbers by parallel silicon assembly. Experiments using biomorphic architectures (with ideal space attributes) have produced a wide spectrum of survival-oriented machines that are reliably domesticated for work applications in specific environments. In particular, several one-chip satellite prototypes show interesting control properties that can be turned into numerous application-specific machines for autonomous, disposable space tasks. We believe that the real power of these architectures lies in their potential to self-assemble into larger, robust, loosely coupled structures. Assembly takes place at hierarchical space scales, with different attendant properties, allowing for inexpensive solutions to many daunting work tasks. The nature of biomorphic control, design, engineering options, and applications are discussed.

Hasslacher, Brosl↗
DOE OSTI2026

Stabilization of Miscible Aqueous Phases via Diffusion‐Controlled Multifunctional Nanoparticle‐Ligand Complexation

Liquid‐in‐liquid structuring by harnessing miscible aqueous domains can be achieved by inducing thermodynamically defined phase separation using aqueous solutions of incompatible solutes, where immiscibility is dictated by the concentrations of the solutes. For instance, in aqueous two‐phase systems (ATPSs), the interfacial tension between the two different aqueous solutions is so small that it stabilizes the phase‐separated domains, but not their shape, thus falling short of designing tunable, robust structures. Here, we introduce a diffusion‐controlled strategy that enables liquid‐in‐liquid compartmentalization absent a thermodynamically defined interface or bulk liquid‐liquid phase separation using a barrier formed in situ at the initial contact boundary of an aqueous dispersion of multifunctional nanoparticles and a solution of multifunctional ligands in pure water or a water/alcohol mixture. The nanoparticles and ligands are entropically driven to disperse uniformly but interact at the initial contact boundary more rapidly than bulk mixing, forming a layer that establishes a barrier akin to a semi‐permeable membrane and allows the formation of tubular compartments. A wealth of opportunities is enabled by the proposed technique, where examples in separations, soft electronic devices, and ultralight porous electromagnetic shielding materials are shown.

cryogels↗
DOE OSTI2026

A data-driven approach to real-time vertical position estimation for NSTX-U vertical stability control

In this paper, a database of 77 996 plasma equilibrium reconstructions from 727 discharges during the initial operation of the NSTX-U spherical tokamak is analyzed to develop a statistically robust model of the plasma vertical position for real-time control. A variety of regression models are developed and tested, ranging in complexity from linear models to deep neural networks, and including input signals ranging from the four pairs of flux loops used historically on NSTX-U up to the full set of 389 real-time signals available to the plasma control system. A linear model based on 140 real-time magnetics signals is found to offer excellent accuracy, with a coefficient of determination R 2 = 0.906. The robustness of this model to limited training data, new operating scenarios, and signal errors is tested, and a procedure is demonstrated to tune the model parameters to optimize its robustness. A time-dependent plasma equilibrium solver, TokaMaker, is used to simulate vertical stability control in NSTX-U, demonstrating that it should be possible to iteratively tune the parameters of a linear vertical position model to stabilize both positive and negative triangularity plasmas in future experiments.

magnetic diagnostics↗
DOE OSTI2024

Trajectory Shaper: A Solution for Disrupted Cooperative Adaptive Cruise Control

Cooperative adaptive cruise control (CACC) can effectively reduce energy consumption, alleviate traffic congestion, and enhance safety. However, communication-related constraints and uncooperative vehicle users can disrupt CACC during real-world operations, significantly undermining the putative benefits of CACC. To alleviate the negative impacts of disrupted CACC, this study develops the trajectory shaper (TS) methods as backup solutions for two scenarios: (i) communication between vehicles is infeasible, and vehicles execute adaptive cruise control (ACC) using local sensor measurements; (ii) follower vehicles reject forming a cooperative platoon and execute their local distributed controllers using the information attained via communication. When communication is infeasible, a distributed TS is devised on each vehicle to modify the sensor measurements, enabling safe and efficient ACC operations. When communication is available but uncooperative agents are involved, the lead vehicle of the platoon executes a centralized TS to modify the information shared with uncooperative agents, achieving optimal platoon-level performance. The centralized and distributed TSs are implemented based on the model predictive control algorithms to yield optimal modifications on input information. Robustness is also factored to tackle model uncertainties during TS operations to ensure safety and efficiency. Numerical experiments validate the control performance of the proposed TSs.

Zhou, Anye [ORNL] (ORCID:0000000301455579)↗
NASA NTRS1998

High-Alpha Research Vehicle Lateral-Directional Control Law Description, Analyses, and Simulation Results

This report contains a description of a lateral-directional control law designed for the NASA High-Alpha Research Vehicle (HARV). The HARV is a F/A-18 aircraft modified to include a research flight computer, spin chute, and thrust-vectoring in the pitch and yaw axes. Two separate design tools, CRAFT and Pseudo Controls, were integrated to synthesize the lateral-directional control law. This report contains a description of the lateral-directional control law, analyses, and nonlinear simulation (batch and piloted) results. Linear analysis results include closed-loop eigenvalues, stability margins, robustness to changes in various plant parameters, and servo-elastic frequency responses. Step time responses from nonlinear batch simulation are presented and compared to design guidelines. Piloted simulation task scenarios, task guidelines, and pilot subjective ratings for the various maneuvers are discussed. Linear analysis shows that the control law meets the stability margin guidelines and is robust to stability and control parameter changes. Nonlinear batch simulation analysis shows the control law exhibits good performance and meets most of the design guidelines over the entire range of angle-of-attack. This control law (designated NASA-1A) was flight tested during the Summer of 1994 at NASA Dryden Flight Research Center.

Davidson, John B.↗
DOE OSTI2022

Design of a supervisory control system for autonomous operation of advanced reactors

Advanced reactors to be deployed in the coming decades will face deregulated energy markets, and may adopt flexible operation to boost profitability. To aid in the transition from baseload to flexible operation paradigm, autonomous operation is sought. This work focuses on the control aspect of autonomous operation. Specifically, a hierarchical control system is designed to support constraint enforcement during routine operational transients. Within the system, data-driven modeling, physics-based state observation, and classical control algorithms are integrated to provide an adaptable and robust solution. A 320 MW Fluoride-cooled High-temperature Pebble-bed Reactor is the design basis for demonstrating the proposed control system. The hierarchical control system consists of a supervisory layer and low-level layer. The supervisory layer receives requests to change the system's operating conditions (e.g., the current reactor power to meet a load -follow), and accepts or rejects them based on constraints that have been assigned. Constraints are issued to keep the plant within an optimal operating region. The low-level layer interfaces with the actuators of the system to fulfill requested changes, while maintaining tracking and regulation duties. Further, to accept requests at the supervisory layer, the Reference Governor algorithm was adopted. To model the dynamics of the reactor, a system identification algorithm, Dynamic Mode Decomposition, was utilized. To estimate the evolution of process variables that cannot be directly measured (e.g., the propagation of delayed neutron precursors), the Unscented Kalman Filter, incorporating a nonlinear model of nuclear dynamics, was adopted. The composition of these algorithms led to a numerical demonstration of constraint enforcement during a 40% power drop transient (at a rate of 5 %/min). Uncontrolled secondary-side temperatures were successfully constrained. Adaptability of the proposed system was demonstrated by modifying the constraint values, and enforcing them during the transient. Robustness was also demonstrated by enforcing constraints under noisy environments.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
NASA NTRS2015

Control and Non-Payload Communications (CNPC) Prototype Radio - Generation 2 Security Architecture Lab Test Report

NASA Glenn Research Center, in cooperation with Rockwell Collins, is working to develop a prototype Control and Non-Payload Communications (CNPC) radio platform as part of NASA Integrated Systems Research Program's (ISRP) Unmanned Aircraft Systems (UAS) Integration in the National Airspace System (NAS) project. A primary focus of the project is to work with the FAA and industry standards bodies to build and demonstrate a safe, secure, and efficient CNPC architecture that can be used by industry to evaluate the feasibility of deploying a system using these technologies in an operational capacity. GRC has been working in conjunction with these groups to assess threats, identify security requirements, and to develop a system of standards-based security controls that can be applied to the current GRC prototype CNPC architecture as a demonstration platform. The security controls were integrated into a lab test bed mock-up of the Mobile IPv6 architecture currently being used for NASA flight testing, and a series of network tests were conducted to evaluate the security overhead of the controls compared to the baseline CNPC link without any security. The aim of testing was to evaluate the performance impact of the additional security control overhead when added to the Mobile IPv6 architecture in various modes of operation. The statistics collected included packet captures at points along the path to gauge packet size as the sample data traversed the CNPC network, round trip latency, jitter, and throughput. The effort involved a series of tests of the baseline link, a link with Robust Header Compression (ROHC) and without security controls, a link with security controls and without ROHC, and finally a link with both ROHC and security controls enabled. The effort demonstrated that ROHC is both desirable and necessary to offset the additional expected overhead of applying security controls to the CNPC link.

Communication Networks↗
NASA NTRSDate not supplied

Performance Analysis of Magnetohydrodynamic Drag Modulation for Actively Controlled Aerocapture at Neptune

While the Ice Giants are a top priority for flagship missions in the NASA’s near-term future, current technologies limit the scientific payload and mission timeline for future Uranian and Neptunian missions due to the need for fuel for orbit insertion maneuvers. Thus, to maximize the scientific potential of future missions, atmospheric aerocapture has been heavily researched. While atmospheric aerocapture simulations have proven enabling for capturing around Neptune, its deep atmospheric pass requires an aeroshell with robust thermal protection systems (TPS). Magnetohydrodynamically-controlled aerocapture serves as a potential solution to the limitations of both fully propulsive orbit insertion and aerodynamically controlled aerocapture. Through NASA Langley’s high-fidelity flight dynamics simulation, the Program to Optimize Simulated Trajectories II, both the aerodynamic-only and magnetohydrodynamic aerocapture methods were simulated and compared for identical missions to Neptune. After applying an optimized numerical predictor-corrector guidance algorithm for both methods, the results showed that magnetohydrodynamics has not only the control authority to successfully capture around Neptune, but also the unique advantage of a shallower atmospheric pass, decreasing the maximum heat load and the required TPS mass.

Danny N. Nguyen↗
DOE OSTI2020

Field Validation of Wake Steering Control with Wind Direction Variability: Preprint

Wake steering is a type of wind farm control strategy wherein upstream turbines are misaligned with the wind direction to redirect their wakes away from downstream turbines, increasing overall wind plant power. Wake steering is often analyzed assuming steady mean wind directions across the wind farm. However, in practice, the wind direction varies considerably over time because of large-scale weather phenomena. Wind direction variability causes wake steering controllers to increase power production less than predicted by steady state models, but more robust wake steering strategies can be designed that account for variable wind conditions. This paper compares the achieved yaw offsets and power gains from two 2-turbine wake steering experiments at a commercial wind farm with model predictions using the FLOw Redirection and Induction in Steady State (FLORIS) control-oriented model, assuming both fixed and variable wind directions. The impact of wind direction variability is modeled by including wind direction and yaw uncertainty in the FLORIS calculations. The field results match the trends predicted assuming wind direction variability. Specifically, the yaw offsets achieved in the intended control regions are lower than desired, resulting in less power gain, while a slight loss in power occurs for wind directions outside of the intended control region because of unintentional yaw misalignment. The agreement between the model and field results suggests that the wind direction variability model can be used to design wake steering controllers that are more robust to variable wind conditions present in the field.

17 WIND ENERGY↗
DOE OSTI2026

Compositional Phase Control in High-Entropy Alloy Electrocatalysts

High-entropy alloys (HEAs) provide uniquely tunable structural and electronic properties that enable robust electrocatalysis. While compositional manipulation of HEAs is well-known, systematically controlling the crystalline phase and morphology remains a challenge that could provide new avenues for controlling reactive sites and physical properties. Here, we show the preferential stabilization of mixed fcc/bcc to fcc phases by controlling the Au content in quinary AuPdFeCoNi HEA nanoparticles. This systematic structural and compositional control, when investigated with an ensemble of electronic, X-ray synchrotron, and surface techniques, allows us to identify the critical short- (few-Å) and medium- (6–10 Å) range structural motifs that deliver exceptional hydrogen evolution reaction (HER) catalysis. Specifically, these HEAs exhibit both outstanding durability (240 h) and high mass activity (50 A/mg PGM ) normalized to noble metal content, outperforming commercial Pt/C (3.18 A/mg PGM ). This structural control over HEA morphology, and its direct association with changes in specific metallic oxidation states and pair–pair atomic structural features, provides new means and strategies for finely designing robust and sustainable electrocatalysts with a majority nonprecious metal composition.

36 MATERIALS SCIENCE↗