Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAMAN SPECTRA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Ultralow-power local laser control of the dimer density in alkali-metal vapors through photodesorption

Ultralow-power diode-laser radiation is employed to induce photodesorption of cesium from a partially transparent thin-film cesium adsorbate on a solid surface. Using resonant Raman spectroscopy, we demonstrate that this photodesorption process enables an accurate local optical control of the density of dimer molecules in alkali-metal vapors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Gold nanoparticle formation in diamond-like carbon using two different methods: Gold ion implantation and co-deposition of gold and carbon

We describe work in which gold nanoparticles were formed in diamond-like carbon (DLC), thereby generating a Au-DLC nanocomposite. A high-quality, hydrogen-free DLC thin film was formed by filtered vacuum arc plasma deposition, into which gold nanoparticles were introduced using two different methods. The first method was gold ion implantation into the DLC film at a number of decreasing ion energies, distributing the gold over a controllable depth range within the DLC. The second method was co-deposition of gold and carbon, using two separate vacuum arc plasma guns with suitably interleaved repetitive pulsing. Transmission electron microscope images show that the size of the gold nanoparticles obtained by ion implantation is 3-5 nm. For the Au-DLC composite obtained by co-deposition, there were two different nanoparticle sizes, most about 2 nm with some 6-7 nm. Raman spectroscopy indicates that the implanted sample contains a smaller fraction of sp{sup 3} bonding for the DLC, demonstrating that some sp{sup 3} bonds are destroyed by the gold implantation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Strain controlled systematic variation of metal-insulator transition in epitaxial NdNiO{sub 3} thin films

We report here the strain dependent structural and electrical transport properties of epitaxial NdNiO{sub 3} thin films. Pulsed laser deposition technique was used to grow the NdNiO{sub 3} thin films on c-axis oriented SrTiO{sub 3} single crystals. Deposited films were irradiated using 200 MeV Ag{sup 15+} ion beam at the varying fluence (1 Multiplication-Sign 10{sup 11}, 5 Multiplication-Sign 10{sup 11}, and 1 Multiplication-Sign 10{sup 12} ions/cm{sup 2}). X-ray diffraction studies confirm the epitaxial growth of the deposited films, which is maintained even up to the highest fluence. Rise in the in-plane compressive strain has been observed after the irradiation. All the films exhibit metal-insulator transition, however, a systematic decrease in the transition temperature (T{sub MI}) has been observed after irradiation, which may be attributed to the increase in the in-plane compression. Raman spectroscopy data reveal that this reduction in T{sub MI}, with the irradiation, is related to the decrease in band gap due to the stress generated by the in-plane compressive strain.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Graphene layer growth on silicon substrates with nickel film by pulse arc plasma deposition

Carbon layer has been grown on a Ni/SiO{sub 2}/Si(111) substrate under high vacuum pressure by pulse arc plasma deposition. From the results of Raman spectroscopy for the sample, it is found that graphene was formed by ex-situ annealing of sample grown at room temperature. Furthermore, for the sample grown at high temperature, graphene formation was shown and optimum temperature was around 1000 Degree-Sign C. Transmission electron microscopy observation of the sample suggests that the graphene was grown from step site caused by grain of Ni film. The results show that the pulse arc plasma technique has the possibility for acquiring homogenous graphene layer with controlled layer thickness.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Improvement of (004) texturing by slow growth of Nd doped TiO{sub 2} films

In this work, we present preferred (004) texturing of sputter deposited titanium dioxide (TiO{sub 2}) films on glass substrates as a consequence of Nd doping at very slow growth rate. Nd concentration was varied from 0.0 to 2.0 atomic percent (at. %) in TiO{sub 2} thin films deposited under identical growth conditions, i.e., the growth rate of 0.6 A/s and at 500 Degree-Sign C. At 2 at. % Nd, complete texturing along (004) plane was observed, as indicated by the X-ray diffraction analyses. Morphology of the deposited TiO{sub 2} films from pure to 2 at. % Nd doped TiO{sub 2} films showed faceted to planar growth. Visualization of electrical and structural analysis (VESTA) software revealed that the change in the morphology was due to preferential growth in (004) orientation. Raman spectroscopy highlighted the phonon confinement in the Eg mode, and a red shift was observed due to an increase in the anti-symmetry in bonding with increased Nd concentration. XPS results confirmed the variation in oxygen vacancy concentration along with the reduction of Ti and Nd valance states with the change in the dopant concentration. Our experiments confirmed that the substitution of Nd at Ti sites was responsible for texturing in (004) orientation and this was possible by growing films at a very slow rate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Damage and strain in single-layer graphene induced by very-low-energy electron-beam irradiation

From the analysis of the ratio of D peak intensity to G peak intensity in Raman spectroscopy, electron beam irradiation with energies of 100 eV was found to induce damage in single-layer graphene. The damage becomes larger with decreasing electron beam energy. Internal strain in graphene induced by damage under irradiation is further evaluated based on G peak shifts. The dose-dependent internal strain was approximately 2.22% cm{sup 2}/mC at 100 eV and 2.65 Multiplication-Sign 10{sup -2}% cm{sup 2}/mC at 500 eV. The strain induced by the irradiation showed strong dependence on electron energy.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

175 MeV Au{sup +13} ion irradiation induced structural and morphological modifications in zinc oxide thin films

Thin films of ZnO were deposited, on Si substrates, using the RF-sputtering technique and irradiated by the 175 MeV Au{sup +13} beams. The structural changes were investigated by x-ray diffraction (XRD) measurements. The particle size found to increase with the increasing ion fluence up to 1 Multiplication-Sign 10{sup 12} ion/cm{sup 2}. At highest irradiation fluence of 5 Multiplication-Sign 10{sup 12} ion/cm{sup 2} the average particle size decreases. The Raman spectroscopy measurements were performed to understand the local phonon mode of the samples. The surface morphology of the as-deposited and irradiated thin films is measured by the Atomic Force Microscopy (AFM).

36 MATERIALS SCIENCE↗

Effect of ammonia plasma treatment on graphene oxide LB monolayers

Graphene oxide monolayer sheets were transferred on Si and SiO{sub 2}/Si substrates by Langmuir-Blodgett technique and were exposed to ammonia plasma at room temperature. The monolayer character of both graphene oxide and plasma treated graphene oxide sheets were ascertained by atomic force microscopy. X-ray photoelectron spectroscopy and Raman spectroscopy revealed that ammonia plasma treatment results in enhancement of graphitic carbon content along with the incorporation of nitrogen. The conductivity of graphene oxide monolayers, which was in the range of 10{sup -6}-10{sup -7} S/cm, increased to 10{sup -2}-10{sup -3} S/cm after the ammonia plasma treatment. These results indicate that the graphene oxide was simultaneously reduced and N-doped during ammonia plasma treatment, without affecting the morphological stability of sheets.

36 MATERIALS SCIENCE↗

Self healing of defected graphene

For electronics applications, defects in graphene are usually undesirable because of their ability to scatter charge carriers, thereby reduce the carrier mobility. It would be extremely useful if the damage can be repaired. In this work, we employ Raman spectroscopy, X-ray photoemission spectroscopy, transmission electron microscopy, and electrical measurements to study defects in graphene introduced by argon plasma bombardment. We have found that majority of these defects can be cured by a simple thermal annealing process. The self-healing is attributed to recombination of mobile carbon adatoms with vacancies. With increasing level of plasma induced damage, the self-healing becomes less effective.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Ultrahigh throughput plasma processing of free standing silicon nanocrystals with lognormal size distribution

We demonstrate a method for synthesizing free standing silicon nanocrystals in an argon/silane gas mixture by using a remote expanding thermal plasma. Transmission electron microscopy and Raman spectroscopy measurements reveal that the distribution has a bimodal shape consisting of two distinct groups of small and large silicon nanocrystals with sizes in the range 2-10 nm and 50-120 nm, respectively. We also observe that both size distributions are lognormal which is linked with the growth time and transport of nanocrystals in the plasma. Average size control is achieved by tuning the silane flow injected into the vessel. Analyses on morphological features show that nanocrystals are monocrystalline and spherically shaped. These results imply that formation of silicon nanocrystals is based on nucleation, i.e., these large nanocrystals are not the result of coalescence of small nanocrystals. Photoluminescence measurements show that silicon nanocrystals exhibit a broad emission in the visible region peaked at 725 nm. Nanocrystals are produced with ultrahigh throughput of about 100 mg/min and have state of the art properties, such as controlled size distribution, easy handling, and room temperature visible photoluminescence.

36 MATERIALS SCIENCE↗

Reduction of 1/f noise in graphene after electron-beam irradiation

We investigated experimentally the effect of the electron-beam irradiation on the level of the low-frequency 1/f noise in graphene devices. It was found that 1/f noise in graphene reduces with increasing concentration of defects induced by irradiation. The increased amount of structural disorder in graphene under irradiation was verified with micro-Raman spectroscopy. The bombardment of graphene devices with 20-keV electrons reduced the noise spectral density, S{sub I}/I{sup 2} (I is the source-drain current) by an order-of magnitude at the radiation dose of 10{sup 4} {mu}C/cm{sup 2}. We analyzed the observed noise reduction in the limiting cases of the mobility and carrier number fluctuation mechanisms. The obtained results are important for the proposed graphene applications in analog, mixed-signal, and radio-frequency systems, integrated circuits and sensors.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Optimization of graphene dry etching conditions via combined microscopic and spectroscopic analysis

Single-layer graphene structures and devices are commonly defined using reactive ion etching and plasma etching with O{sub 2} or Ar as the gaseous etchants. Although optical microscopy and Raman spectroscopy are widely used to determine the appropriate duration of dry etching, additional characterization with atomic force microscopy (AFM) reveals that residual graphene and/or etching byproducts persist beyond the point where the aforementioned methods suggest complete graphene etching. Recognizing that incomplete etching may have deleterious effects on devices and/or downstream processing, AFM characterization is used here to determine optimal etching conditions that eliminate graphene dry etching residues.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Analysis of strained surface layers of ZnO single crystals after irradiation with intense femtosecond laser pulses

Structural modifications of ZnO single crystals that were created by the irradiation with femtosecond laser pulses at fluences far above the ablation threshold were investigated with micro-Raman spectroscopy. After light-matter interaction on the femtosecond time scale, rapid cooling and the pronounced thermal expansion anisotropy of ZnO are likely to cause residual strains of up to 1.8% and also result in the formation of surface cracks. This process relaxes the strain only partially and a strained surface layer remains. Our findings demonstrate the significant role of thermoelastic effects for the irradiation of solids with intense femtosecond laser pulses.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Radiation hardness of graphene and MoS{sub 2} field effect devices against swift heavy ion irradiation

We have investigated the deterioration of field effect transistors based on two-dimensional materials due to irradiation with swift heavy ions. Devices were prepared with exfoliated single layers of MoS{sub 2} and graphene, respectively. They were characterized before and after irradiation with 1.14 GeV U{sup 28+} ions using three different fluences. By electrical characterization, atomic force microscopy, and Raman spectroscopy, we show that the irradiation leads to significant changes of structural and electrical properties. At the highest fluence of 4 Multiplication-Sign 10{sup 11} ions/cm{sup 2}, the MoS{sub 2} transistor is destroyed, while the graphene based device remains operational, albeit with an inferior performance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Amorphization and reduction of thermal conductivity in porous silicon by irradiation with swift heavy ions

In this article, we demonstrate that the thermal conductivity of nanostructured porous silicon is reduced by amorphization and also that this amorphous phase in porous silicon can be created by swift (high-energy) heavy ion irradiation. Porous silicon samples with 41%-75% porosity are irradiated with 110 MeV uranium ions at six different fluences. Structural characterisation by micro-Raman spectroscopy and SEM imaging show that swift heavy ion irradiation causes the creation of an amorphous phase in porous Si but without suppressing its porous structure. We demonstrate that the amorphization of porous silicon is caused by electronic-regime interactions, which is the first time such an effect is obtained in crystalline silicon with single-ion species. Furthermore, the impact on the thermal conductivity of porous silicon is studied by micro-Raman spectroscopy and scanning thermal microscopy. The creation of an amorphous phase in porous silicon leads to a reduction of its thermal conductivity, up to a factor of 3 compared to the non-irradiated sample. Therefore, this technique could be used to enhance the thermal insulation properties of porous Si. Finally, we show that this treatment can be combined with pre-oxidation at 300 Degree-Sign C, which is known to lower the thermal conductivity of porous Si, in order to obtain an even greater reduction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Laser irradiation of carbon nanotube films: Effects and heat dissipation probed by Raman spectroscopy

We investigate the thermal properties of thin films formed by single- and multi-walled carbon nanotubes submitted to laser irradiation using Raman scattering as a probe of both the tube morphology and the local temperature. The nanotubes were submitted to heating/cooling cycles attaining high laser intensities ({approx}1.4 MW/cm{sup 2}) under vacuum and in the presence of an atmosphere, with and without oxygen. We investigate the heat diffusion of the irradiated nanotubes to their surroundings and the effect of laser annealing on their properties. The presence of oxygen during laser irradiation gives rise to an irreversible increase of the Raman efficiency of the carbon nanotubes and to a remarkable increase of the thermal conductivity of multi-walled films. The second effect can be applied to design thermal conductive channels in devices based on carbon nanotube films using laser beams.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Extreme ultraviolet induced defects on few-layer graphene

We use Raman spectroscopy to show that exposing few-layer graphene to extreme ultraviolet (EUV, 13.5 nm) radiation, i.e., relatively low photon energy, results in an increasing density of defects. Furthermore, exposure to EUV radiation in a H{sub 2} background increases the graphene dosage sensitivity, due to reactions caused by the EUV induced hydrogen plasma. X-ray photoelectron spectroscopy results show that the sp{sup 2} bonded carbon fraction decreases while the sp{sup 3} bonded carbon and oxide fraction increases with exposure dose. Our experimental results confirm that even in reducing environment oxidation is still one of the main source of inducing defects.

36 MATERIALS SCIENCE↗

Superhydrophilic graphite surfaces and water-dispersible graphite colloids by electrochemical exfoliation

Superhydrophilic graphite surfaces and water-dispersible graphite colloids are obtained by electrochemical exfoliation with hydrophobic graphite electrodes. Such counterintuitive characteristics are caused by partial oxidation and investigated by examining both graphite electrodes and exfoliated particles after electrolysis. The extent of surface oxidation can be explored through contact angle measurement, scanning electron microscope, electrical sheet resistance, x-ray photoelectron spectroscopy, zeta-potential analyzer, thermogravimetric analysis, UV-visible, and Raman spectroscopy. The degree of wettability of the graphite anode can be altered by the electrolytic current and time. The water contact angle declines generally with increasing the electrolytic current or time. After a sufficient time, the graphite anode becomes superhydrophilic and its hydrophobicity can be recovered by peeling with adhesive tape. This consequence reveals that the anodic graphite is oxidized by oxygen bubbles but the oxidation just occurs at the outer layers of the graphite sheet. Moreover, the characteristics of oxidation revealed by UV peak shift, peak ratio between D and G bands, and negative zeta-potential indicate the presence of graphite oxide on the outer shell of the exfoliated colloids. However, thermogravimetric analysis for the extent of decomposition of oxygen functional groups verifies that the amount of oxygen groups is significantly less than that of graphite oxide prepared via Hummer method. The structure of this partially oxidized graphite may consist of a graphite core covered with an oxidized shell. The properties of the exfoliated colloids are also influenced by pH of the electrolytic solution. As pH is increased, the extent of oxidation descends and the thickness of oxidized shell decreases. Those results reveal that the degree of oxidation of exfoliated nanoparticles can be manipulated simply by controlling pH.

36 MATERIALS SCIENCE↗