Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Polymer Science”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

The Role of Unit-Cell Topology in Modulating the Compaction Response of Additively Manufactured Cellular Materials using Simulations and Validation Experiments

Additive manufacturing has enabled a transformational ability to create cellular structures (or foams) with tailored topology. Compared to their monolithic polymer counterparts, cellular structures are potentially suitable for systems requiring materials with high specific energy-absorbing capability to provide enhanced damping. In this work, we demonstrate the utility of controlling unit-cell topology with the intent of obtaining a desired stress–strain response and energy density. Using mesoscale simulations that resolve the unit-cell sub-structures, we validate the role of unit-cell topology in selectively activating a buckling mode and thereby modulating the characteristic stress–strain response. Simulations incorporate a linear viscoelastic constitutive model and a hyperelastic model for simulating large deformation of the polymer under both tension and compression. Simulated results for nine different cellular structures are compared with experimental data to gain insights into three different modes of buckling and the corresponding stress–strain response.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Saddle-Shaped Third Component with Out-of-Plane Electrostatic Dipole for Realizing High-Performance Photovoltaic Donor Terpolymers

Terpolymer fabrication is an effective methodology for molecular engineering and generating high-performance organic photovoltaic materials to construct highly efficient polymer solar cells. Modification of the polymer PM6 by incorporating a third component resulting in the formation of a ternary copolymer is reported to outperform PM6 in achieving enhanced device performances. However, one of the major challenges in constructing high-performance terpolymers is to counter the molecular disorder caused by the backbone entropy induced by the third moiety. Here, in this work, double B←N bridged bipyridine (BNBP) is used as the third component, which possesses a strong out-of-plane electrostatic dipole owing to the saddle-shaped B←N fused ring structure. The out-of-plane dipole moment introduced in the modified PM6 terpolymer can be used as a means for tuning and optimizing the nanostructures of the blended films. The prepared PM6-BNBP-4 blend polymer with 4% of the benzodithiophene dione monomers replaced by BNBP results in excellent power conversion efficiency of 19.13%. This work demonstrates that the out-of-plane electrostatic dipole moment in saddle-shaped molecules is valuable for achieving high-performance organic photovoltaic donor materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Ion Correlations and Partial Ionicities in the Lamellar Phases of Block Copolymeric Ionic Liquids

Recently, significant interest has arisen on the impact of dynamical ion correlations on the conductivity and transport properties of polymeric electrolyte materials. It has been hypothesized that confining ion motion to narrow channels may reduce such ion correlations and enhance the resulting ionic conductivity. Motivated by such considerations, in this study we used a multiscale simulation framework to study the dynamical ion correlations in the microphase-separated lamella phase of block copolymeric ionic liquids and compare with the corresponding results for homopolymeric systems. We probed the influence of ion correlations through the partial ionicity, Δ, which quantifies the ratio of true conductivity to the ideal, Nernst–Einstein conductivity for the anion-related contributions. Consistent with our original hypothesis, our results demonstrate that the partial ionicity relating to the mobile anions is much larger in the lamella phases of block copolymers compared to that in homopolymers. Analysis of the distinct conductivity contributions demonstrates that such results arise as a result of an intricate compensation among the nonideal dynamical correlations relating to anions in lamella phases. Overall, our results suggest that self-assembled phases of block copolymers may provide an avenue to tune the dynamical ion correlations in polymer electrolyte systems.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Water accelerated self-healing of hydrophobic copolymers

Previous studies have shown that copolymer compositions can significantly impact self-healing properties. This was accomplished by enhancement of van der Waals (vdW) forces which facilitate self-healing in relatively narrow copolymer compositional range. In this work we report the acceleration of self-healing in alternating/random hydrophobic acrylic-based copolymers in the presence of confined water molecules. Under these conditions competing vdW interactions do not allow H 2 O-diester H-bonding, thus forcing nBA side groups to adapt L-shape conformations, generating stronger dipole-dipole interactions resulting in shorter inter-chain distances compared to ‘key-and-lock’ associations without water. The perturbation of vdW forces upon mechanical damage in the presence of controllable amount of confined water is energetically unfavorable leading the enhancement of self-healing efficiency of hydrophobic copolymers by a factor of three. The concept may be applicable to other self-healing mechanisms involving reversible covalent bonding, supramolecular chemistry, or polymers with phase-separated morphologies.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Microporous structure in silicone polymers with polylactic acid and polyethylene glycol microspheres: Synthesis and characterization

Porosity in polymer parts could improve mechanical properties while reducing weight and density. Individual pores must be small enough that bulk mechanical properties are retained but significant enough to reduce the density of the material. Filler materials can be incorporated into polymer matrices and removed to create voids. Here, this paper focuses on creating spherical pores in silicone matrices by inserting and removing core materials or fillers during post-cure. A method was developed to incorporate pore formers into an uncured polymer resin and remove the pore former materials from the matrix. Polyethylene glycol (PEG) and polylactic acid (PLA) microspheres were created and incorporated into silicone matrices as pore formers. Microspheres with controllable size distributions were formed via an emulsion formation. Microspheres are removed from the matrix by solvent extraction and calcination. Thermogravimetric Analysis (TGA), Dynamic Mechanical Analysis (DMA), and optical imaging characterize and determine the successful creation of micropores in the polymer matrices.

36 MATERIALS SCIENCE↗
DOE OSTI2024

The role of unit cell topology in modulating the compaction response of additively manufactured cellular materials using simulations and validation experiments

Additive manufacturing has enabled a transformational ability to create cellular structures (or foams) with tailored topology. Compared to their monolithic polymer counterparts, cellular structures are potentially suitable for systems requiring materials with high specific energy-absorbing capability to provide enhanced damping. In this work, we demonstrate the utility of controlling unit-cell topology with the intent of obtaining a desired stress–strain response and energy density. Using mesoscale simulations that resolve the unit-cell sub-structures, we validate the role of unit-cell topology in selectively activating a buckling mode and thereby modulating the characteristic stress–strain response. Simulations incorporate a linear viscoelastic constitutive model and a hyperelastic model for simulating large deformation of the polymer under both tension and compression. Simulated results for nine different cellular structures are compared with experimental data to gain insights into three different modes of buckling and the corresponding stress–strain response.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Synthesis and Characterization of Soy Hull Biochar-Based Flexible Polyurethane Foam Composites

Flexible polyurethane foams are a diverse class of materials encompassing furniture, packaging, automotive, and many other industrial and domestic applications. Polyurethane foams are synthesized by the addition of polyols and isocyanates; however, the petroleum origin and toxic nature of isocyanates have driven many to look for more sustainable routes to production. Renewable fillers have emerged as a biobased resource to decrease the carbon footprint of this widely used polymeric material. In this study, soy hulls, as mass-produced, industrial by-products of soybean production, were used to create a biochar beneficial in the synthesis of flexible polyurethane foam composites. The addition of soy hull biochar was found to maintain the compression properties of foams at a decreasing isocyanate index, reducing the amount of isocyanates needed for production. In addition, the addition of biochar decreased the flammability of foams, important for many applications where consumer safety is important. The results point to the ability to create safer, more sustainable, and even more cost-effective polyurethane foams through the reduction in isocyanate use while maintaining the properties of this important class of polymers.

Chemistry↗
DOE OSTI2020

Functionalized linear and cyclic polyolefins

This invention relates to methods and compositions for preparing linear and cyclic polyolefins. More particularly, the invention relates to methods and compositions for preparing functionalized linear and cyclic polyolefins via olefin metathesis reactions. Polymer products produced via the olefin metathesis reactions of the invention may be utilized for a wide range of materials applications. The invention has utility in the fields of polymer and materials chemistry and manufacture.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Continuous Polymer Synthesis and Manufacturing of Polyurethane Elastomers Enabled by Automation

Connecting polymer synthesis and processing is an important challenge for streamlining the manufacturing of polymeric materials. In this work, the automated synthesis of acrylate-capped polyurethane oligomers is integrated with vat photopolymerization 3D printing. This strategy enabled the rapid manufacturing of a library of polyurethane-based elastomeric materials with differentiated thermal and mechanical properties. The automated semi-continuous batch synthesis approach proved enabling for resins with otherwise short shelf lives because the intimate connection between synthesis, formulation, and processing. Structure-property studies demonstrated the ability to tune properties through systematic alteration of crosslink density and chemical composition.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Water-Soluble 3D Covalent Organic Framework that Displays an Enhanced Enrichment Effect of Photosensitizers and Catalysts for the Reduction of Protons to H 2

Covalent organic frameworks (COFs) are emerging porous polymers that have 2D or 3D long-range ordering. Currently available COFs are typically insoluble or decompose upon dissolution, which remarkably restricts their practical implementations. For 3D COFs, the achievement of noninterpenetration, which maximizes their porosity-derived applications, also remains a challenge synthetically. Here, we report the synthesis of the first highly water-soluble 3D COF (sCOF-101) from irreversible polymerization of a preorganized supramolecular organic framework through cucurbit[8]uril (CB[8])-controlled [2 + 2] photodimerization. Synchrotron X-ray scattering and diffraction analyses confirm that sCOF-101 exhibits porosity periodicity, with a channel diameter of 2.3 nm, in both water and the solid state and retains the periodicity under both strongly acidic and basic conditions. As an ordered 3D polymer, sCOF-101 can enrich [Ru(bpy) 3 ] 2+ photosensitizers and redox-active polyoxometalates in water, which leads to remarkable increase of their photocatalytic activity for proton reduction to produce H2.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Chemical Recycling of Thiol Epoxy Thermosets via Light-Driven C–C Bond Cleavage

Epoxy thermosets are high-volume materials that play a central role in a wide range of engineering applications; however, technologies to recycle these polymers remain rare. Here, we present a catalytic, light-driven method that enables chemical recycling of industrially relevant thiol epoxy thermosets to their original monomer at ambient temperature. This strategy relies on the proton-coupled electron transfer (PCET) activation of hydroxy groups within the polymer network to generate key alkoxy radicals that promote the fragmentation of the polymer through C–C bond β-scission. The method fully depolymerizes insoluble thiol epoxy thermosets into well-defined mixtures of small-molecule products, which can collectively be converted into the original monomer via a one-step dealkylation process. Notably, this process is selective and efficient even in the presence of other commodity plastics and additives commonly found in commercial applications. Finally, these results constitute an important step toward making epoxy thermosets recyclable and more generally exemplify the potential of PCET to offer a more sustainable end-of-life for a diverse array of commercial plastics.

36 MATERIALS SCIENCE↗
NASA NTRS1993

Feasibility study: Monodisperse polymer particles containing laser-excitable dyes

The optical properties associated with small particles, which include aerosols, hydrosols and solid microspheres have an impact on several areas of science and engineering. Since the advent of high-speed computers and lasers, the interaction of light with matter in the form of small particles with a discontinuous optical boundary relative to the surroundings has been much better understood. Various nonlinear optical effects have been observed involving interaction of a laser beam with both solid microspheres and liquid microdroplets. These include observation of second and third harmonic generation, four wave mixing, optical visibility, two photon absorption, observation of stimulated emission and lasing, and Stimulated Raman Scattering. Many of these effects are observed with laser intensities which are orders of magnitude less than that required by threshold condition for interactions in macroscopic bulk medium. The primary reason for this is twofold. The front surface of the microsphere acts as a thick lens to enhance the internal intensity of the input laser radiation, and the spherical shape of the droplet acts as an optical cavity to provide feedback at specific wavelengths corresponding to the whispering gallery modes or the morphology dependent resonances (MDR's). The most interesting and significant recent finding in this field is undoubtedly the existence of resonance peaks in linear and nonlinear optical spectra. Such resonance peaks are only dependent on the particle morphology, which means the size, shape and refractive index of the particle. Because of the simultaneous presence of these resonances, they have been referred to by many names, including structural resonances, whispering modes or whispering gallery modes, creeping waves, circumferential waves, surfaces modes, and virtual modes. All of these names refer to the same phenomena, i.e. morphology dependent resonances (MDR's) which has already been described and predicted precisely by electromagnetic theory and Loentz-Mie theory since 1908. MDR's can become important when the particle size (radius a) approaches and exceeds the wavelength of the electromagnetic wave (lambda) and the refractive index of the particle is greater than that of the surrounding medium. Such resonances are easiest to observe from a single particle with high symmetry, such as a sphere, spheroid, or cylinder. MDR's correspond to solutions of the characteristic equations of the electromagnetic fields in the presence of a sphere.

Venkateswarlu, Putcha↗
DOE OSTI2021

Super-Resolution Photothermal Patterning in Conductive Polymers Enabled by Thermally Activated Solubility

Doping induced solubility control (DISC) patterning is a recently developed technique which uses the change in polymer solubility upon doping, along with an optical dedoping process, to achieve high resolution optical patterning. DISC patterning is remarkable because the process resolution exceeds the linear Abbe’s diffraction limit, however, no mechanism has been proposed to explain such high resolution. Here, we use diffraction to spatially modulate the light intensity and determine the dissolution rate, revealing a superlinear dependence on light intensity, which yields features that are sharper than the profile of the writing photomask. This rate law is independent of wavelength, indicating that patterning resolution is not dominated by an optical dedoping reaction, as was previously proposed. Instead we show here that the optical patterning mechanism is primarily controlled by the thermal profile generated by the laser. To quantify this effect, the thermal profile and dissolution rate are modeled using a finite-element model and compared against patterned line cross sections as a function of wavelength, laser intensity, and dwell time. Our model reveals that although the laser-generated thermal profile is broadened considerably beyond the lasers resolution, the highly temperature dependent dissolution rate results in selective dissolution near the peak of the thermal profile. Therefore, the key factor in achieving super-resolution patterning is a strongly temperature dependent dissolution rate|a common feature of many polymers. In addition to suggesting several routes to improved resolution, our model also demonstrates that doping is not required for optical patterning of conjugated polymers, as was previously believed. Instead, we demonstrate that superlinear resolution optical patterning is attainable in any conjugated polymer simply by tuning the solvent quality during patterning, thus extending the applicability of our method to a wide class of materials. Here, we demonstrate the generality of photothermal patterning by writing sub-400 nm features into undoped Pff-BT4T-2OD.

36 MATERIALS SCIENCE↗
NASA NTRS2001

Androids: application of EAP as artificial muscles to entertainment industry

The classic movie Metropolis (1926), which is nowadays considered a cinema milestone, has shown the possibility to build robots called androids that are science and fiction run together to realize a dream: the human-like robot. In that movie, Dr. Rotwang transforms a simple and cold calculating robot into the body of a beautiful woman. Robots have often been depicted as metal creatures with cold steel bodies, but there is no reason why metals should be the only kind of material for construction of robots. The authors examined the issues related to applying electroactive polymers materials (EAP) to the entertainment industry. EAP are offering attractive characteristics with the potential to produce more realistic models of living creatures at significantly lower cost. This paper seeks to elucidate how EAP might infiltrate and ultimately revolutionize entertainment, showing some applicative examples.

Animatronics↗
DOE OSTI2023

Benzo[d]thiazole Based Wide Bandgap Donor Polymers Enable 19.54% Efficiency Organic Solar Cells Along with Desirable Batch-to-Batch Reproducibility and General Applicability

The limited selection pool of high-performance wide bandgap (WBG) polymer donors is a bottleneck problem of the nonfullerene acceptor (NFA) based organic solar cells (OSCs) that impedes the further improvement of their photovoltaic performances. In this work, a series of new WBG polymers, namely PH-BTz, PS-BTz, PF-BTz, and PCl-BTz, are developed by using the bicyclic difluoro-benzo[d]thiazole (BTz) as the acceptor block and benzo[1,2-b:4,5-b']dithiophene (BDT) derivatives as the donor units. By introducing S, F, and Cl atoms to the alkylthienyl sidechains on BDT, the resulting polymers exhibit lowered energy levels and enhanced aggregation properties. The fluorinated PBTz-F not only exhibits a low-lying HOMO level, but also has stronger face-on packing order and results in more uniform fibril-like interpenetrating networks in the related PF-BTz:L8-BO blend. A high-power conversion efficiency (PCE) of 18.57% is achieved. Moreover, PBTz-F also exhibits a good batch-to-batch reproducibility and general applicability. In addition, ternary blend OSCs based on the host PBTz-F:L8-BO blend and PM6 guest donor exhibits a further enhanced PCE of 19.54%, which is among the highest values of OSCs.

36 MATERIALS SCIENCE↗
NASA NTRS2004

New Polymer Electrolyte Cell Systems

PAPERS PUBLISHED: 1. Pappenfus, Ted M.; Henderson, Wesley A.; Owens, Boone B.; Mann, Kent R.; Smyrl, William H. Complexes of Lithium Imide Salts with Tetraglyme and Their Polyelectrolyte Composite Materials. Journal of the Electrochemical Society (2004), 15 1 (2), A209-A2 15. 2. Pappenfus, Ted M.; Henderson, Wesley A.; Owens, Boone B.; Mann, Kent R.; Smyrl, William H. Ionic-liquidlpolymer electrolyte composite materials for electrochemical device applications. Polymeric Materials Science and Engineering (2003), 88 302. 3. Pappenfus, Ted R.; Henderson, Wesley A.; Owens, Boone B.; Mann, Kent R.; and Smyrl, William H. Ionic Conductivity of a poly(vinylpyridinium)/Silver Iodide Solid Polymer Electrolyte System. Solid State Ionics (in press 2004). 4. Pappenfus Ted M.; Mann, Kent R; Smyrl, William H. Polyelectrolyte Composite Materials with LiPFs and Tetraglyme. Electrochemical and Solid State Letters, (2004), 7(8), A254.

Smyrl, William H.↗