Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Photocurrent”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Ultrafast carrier dynamics in terahertz photoconductors and photomixers: beyond short-carrier-lifetime semiconductors

Abstract Efficient terahertz generation and detection are a key prerequisite for high performance terahertz systems. Major advancements in realizing efficient terahertz emitters and detectors were enabled through photonics-driven semiconductor devices, thanks to the extremely wide bandwidth available at optical frequencies. Through the efficient generation and ultrafast transport of charge carriers within a photo-absorbing semiconductor material, terahertz frequency components are created from the mixing products of the optical frequency components that drive the terahertz device – a process usually referred to as photomixing. The created terahertz frequency components, which are in the physical form of oscillating carrier concentrations, can feed a terahertz antenna and get radiated in case of a terahertz emitter, or mix with an incoming terahertz wave to down-convert to DC or to a low frequency photocurrent in case of a terahertz detector. Realizing terahertz photoconductors typically relies on short-carrier-lifetime semiconductors as the photo-absorbing material, where photocarriers are quickly trapped within one picosecond or less after generation, leading to ultrafast carrier dynamics that facilitates high-frequency device operation. However, while enabling broadband operation, a sub-picosecond lifetime of the photocarriers results in a substantial loss of photoconductive gain and optical responsivity. In addition, growth of short-carrier-lifetime semiconductors in many cases relies on the use of rare elements and non-standard processes with limited accessibility. Therefore, there is a strong motivation to explore and develop alternative techniques for realizing terahertz photomixers that do not rely on these defect-introduced short-carrier-lifetime semiconductors. This review will provide an overview of several promising approaches to realize terahertz emitters and detectors without short-carrier-lifetime semiconductors. These novel approaches utilize p-i-n diode junctions, plasmonic nanostructures, ultrafast spintronics, and low-dimensional materials to offer ultrafast carrier response. These innovative directions have great potentials for extending the applicability and accessibility of the terahertz spectrum for a wide range of applications.

36 MATERIALS SCIENCE↗

Role of Pt Nanoparticles in Photoreactions on TiO 2 Photoelectrodes

Highly efficient Pt-TiO 2 composite photoelectrodes were synthesized by combining two novel deposition methods: ACVD and a room temperature RF (radio frequency) magnetron sputtering method. A room temperature RF magnetron sputtering method allowed uniform deposition of Pt nanoparticles (NPs) onto the as-synthesized nanostructured columnar TiO 2 films by ACVD. Pt NP sizes from 0.5 to 3 nm demonstrating a high particle density (>10 12 cm -2 ) could be achieved by varying deposition time with constant pressure and power intensity. As-synthesized Pt-TiO2 films were used as photoanodes for water photolysis. Pt nanoparticles deposited onto the TiO 2 film for 20s produced the highest photocurrent (7.92 mA/cm 2 to 9.49 mA/cm 2 ) and maximized the energy conversion efficiency (16.2 % to 21.2 %) under UV illumination. However, as the size of Pt particles increased, more trapping sites for photogenerated electron-hole pairs decreased photoreaction.

14 SOLAR ENERGY↗

Reduced synthesis temperatures of SrNbO 2 N perovskite films for photoelectrochemical fuel production

Perovskite oxynitrides, such as SrNbO 2 N, have been shown to be promising materials for photoanodes in tandem photoelectrochemical cells, due to their suitable bandgap and charge transport. However, thin film synthesis and characterization of oxynitride perovskites are challenging due to high processing temperatures that are incompatible with available substrates. In this work, we report on reduced synthesis temperatures of SrNbO 2 N perovskite thin films on Si substrates across a range of chemical compositions. Polycrystalline thin films with perovskite crystal structure are obtained by sputtering at ambient temperature and annealing at 550-600 degrees C. The perovskite structure has a relatively broad range of cation composition between 50 and 60% Sr with varying O/N ratio according to Rutherford backscattering spectrometry. The maximum photocurrent density was obtained at 55 cation % of Sr, which is slightly Sr-rich compared to the nominal SrNbO 2 N stoichiometry. This work shows the importance of considering cation and anion composition in studying oxynitride perovskites for solar fuel applications.

36 MATERIALS SCIENCE↗

Photoelectrochemically Self Improving Si/GaN Photocathode: Figure 2b Raw Data

Photoconductive atomic force microscopy (PC-AFM) measurements were conducted on Si/GaN samples. PeakForce TUNA mode was used to acquire the morphology and current simultaneously. A PtIr conductive probe with spring constant of 2.8 Nm-1 was used for the scanning. A white light source was used to illuminate the surface during the acquisition. Line scan extracting the topography and photocurrent from a as-received Si/GaN sample. The topography mapping is 2 × 2 µm2. The sample bias was 0.4V and this photoconductive AFM measurement was performed under white light front illumination with an angle.

photocathode↗

Photoelectrochemically Self Improving Si/GaN Photocathode: Figure 2d Raw Data

After 10 hrs of chronoamperometry (CA) photoconductive atomic force microscopy (PC-AFM) measurements were conducted on Si/GaN samples using a commercial AFM system (Bruker Dimension Icon). PeakForce TUNA mode was used to acquire the morphology and current simultaneously. A PtIr conductive probe with spring constant of 2.8 Nm-1 was used for the scanning. A white light source was used to illuminate the surface during the acquisition. Line scan extracting the topography and photocurrent from this 10 hour CA tested Si/GaN sample. The topography mapping is 2 × 2 µm2. No sample bias was applied and this photoconductive AFM measurement was performed under white light front illumination with an angle.

photocathode↗

Optically Detected Magnetic Resonance Studies on π-conjugated semiconductor systems

Optically Detected Magnetic Resonance (ODMR) techniques were used to investigate the dynamics of excitons and charge carriers in π-conjugated organic semiconductors. Degradation behavior of the negative spin-1/2 electroluminescence-detected magnetic resonance (ELDMR) was observed in Alq3 devices. The increase in the resonance amplitude implies an increasing bipolaron formation during degradation, which might be the result of growth of charge traps in the device. The same behavior of the negative spin-1/2 ELDMR was observed in 2wt% Rubrene doped Tris(8-hydroxyquinolinato)aluminium (Alq3) devices. However, with increasing injection current, a positive spin-1/2 ELDMR, together with positive spin 1 triplet powder patterns at Δm S =±1 and Δm S =±2, emerges. Due to the similarities in the frequency dependences of single and double modulated ELDMR and the photoluminescence-detected magnetic resonance (PLDMR) results in poly[2-methoxy-5-(2 -ethyl-hexyloxy)-1,4-phenyl ene vinylene] (MEH-PPV) films, the mechanism for this positive spin-1/2 ELDMR was assigned to enhanced triplet-polaron quenching under resonance conditions. The ELDMR in rubrene doped Alq3 devices provides a path to investigate charge distribution in the device under operational conditions. Combining the results of several devices with different carrier blocking properties and the results from transient EL, it was concluded trions not only exist near buffer layer but also exist in the electron transport layer. This TPQ model can also be used to explain the positive spin-1/2 PLDMR in poly(3-hexylthiophene) (P3HT) films at low temperature and in MEH-PPV films at various temperatures up to room temperature. Through quantitative analysis, TE-polaron quenching (TPQ) model is shown having the ability to explain most behaviors of the positive spin-1/2 resonance. Photocurrent detected magnetic resonance (PCDMR) studies on MEH-PPV devices revealed a novel transient resonance signal. The signal may originate from the higher concentration of deep traps near cathode. A quantitative analysis based on this assumption was carried out and found to be consistent with the experimental results.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Folding and Function of Proteorhodopsins in Photoenergy Transducing Membranes

The overall research objectives are to develop proteorhodopsin (PR) proteins as a model system for α-helical membrane protein insertion and folding, and to advance understanding of the diversity and mechanisms of PRs, a large family of photoenergy transducers (~4000 identified) abundant in the world’s oceans. Specific aims are: (1) To develop a high-efficiency genetic selection procedure for light-driven proton-pumping in E. coli cells. Such a procedure would provide a positive selection method for proper folding and function of PRs in the E. coli membrane. (2) Characterize flash-induced absorption changes and photocurrents in PR variants in organisms from various environments, and their expression level and function when expressed in E. coli. Subaims are to: (a) elucidate the relationship of the transport mechanism to mechanisms of other microbial rhodopsins, some of which like PRs function as ion transporters and some of which use light energy to activate signaling pathways (sensory rhodopsins); and (b) identify important residues and chemical events in light-driven proton transport by PRs. In addition to their importance to the energy of the biosphere PRs have attracted interest for their potential for use in making photoenergy-transducing membranes for bioengineering applications.

14 SOLAR ENERGY↗

WO 3 /TiO 2 Nanotube Photoanodes for Solar Water Splitting with Simultaneous Wastewater Treatment

Nanostructured WO 3 /TiO 2 nanotubes with properties that enhance solar photoconversion reactions were developed, characterized and tested. The TiO 2 nanotubes were prepared by anodization of Ti foil, and WO 3 was electrodeposited on top of the nanotubes. SEM images show that these materials have the same ordered structure as TiO 2 nanotubes, with an external nanostructured WO 3 layer. Diffuse reflectance spectra showed an increase in the visible absorption relative to bare TiO 2 nanotubes, and in the UV absorption relative to bare WO 3 films. Incident simulated solar photon-to-current efficiency increased from 30% (for bare WO 3 ) to 50% (for WO 3 /TiO 2 composites). With the addition of diverse organic pollutants, the photocurrent densities exhibited more than a 5-fold increase. Chemical oxygen demand measurements showed the simultaneous photodegradation of organic pollutants. The results of this work indicate that the unique structure and composition of these composite materials enhance the charge carrier transport and optical properties compared with the parent materials.

Reyes, Karla Rosa↗

Solar Cell Nanotechnology (Final Technical Report)

The objective of this project is to develop a low cost nonlithographic nanofabrication technology for the fabrication of thin film porous templates as well as uniform arrays of semiconductor nanostructures for the implementation of high efficiency solar cells. Solar cells based on semiconductor nanostructures are expected to have very high energy conversion efficiencies due to the increased absorption coefficients of semiconductor nanostructures. In addition, the thin film porous template can be used for optimum surface texturing of solar cells leading to additional enhancement in energy conversion efficiency. An important requirement for these applications is the ability to synthesize nanostructure arrays of different dimensions with good size control. This project employed nanoporous alumina templates created by the anodization of aluminum thin films deposited on glass substrates for the fabrication of the nanostructures and optimized the process parameters to obtain uniform pore diameters. An additional requirement is uniformity or regularity of the nanostructure arrays. While constant current anodization was observed to provide controlled pore diameters, constant voltage anodization was needed for regularity of the nanostructure arrays. Thus a two-step anodization process was investigated and developed in this project for improving the pore size distribution and pore periodicity of the nanoporous alumina templates. CdTe was selected to be the active material for the nanowires, and the process for the successful synthesis of CdTe nanowires was developed in this project. Two different synthesis approaches were investigated in this project, electrochemical and electrophoretic deposition. While electrochemical synthesis was successfully employed for the synthesis of nanowires inside the pores of the alumina templates, the technique was determined to be non-optimum due to the need of elevated temperature that is detrimental to the structural integrity of the nanoporous alumina templates. In order to eliminate this problem, electrophoretic deposition was selected as the more appropriate technique, which involves the guided deposition of semiconductor nanoparticles in the presence of ultrasonic energy to form the crystalline nanowires. Extensive experimental research was carried out to optimize the process parameters for formation of crystalline nanowires. It was observed that the environmental bath temperature plays a critical role in determining the structural integrity of the nanowires and hence their lengths. Investigation was carried out for the formation of semitransparent ohmic contacts on the nanowires to facilitate photocurrent spectroscopy measurements as well as for solar cell implementation. Formation of such ohmic contacts was found to be challenging and a process involving mechanical and electrochemical polishing was developed to facilitate such contacts. The use of nanoporous alumina templates for the surface texturing of mono- and multi-crystalline solar cells was extensively investigated by electrochemical etching of the silicon through the pores of the nanoporous templates. The processes for template formation as well as etching were optimized and the alumina/silicon interface was investigated using capacitance-voltage characterization. The process developed was found to be viable for improving solar cell performance.

14 SOLAR ENERGY↗

Combinatorial Discovery and Optimization of the Composition, Doping and Morphology of New Oxide Semiconductors for Efficient Photoelectrochemical Water Splitting

The increasing need for carbon free energy has focused renewed attention on solar energy conversion. Although photovoltaic cells excel at directly converting of solar energy to electricity, they do not directly produce stored energy or fuels that account for more than 75% of current energy use. Direct photoelectrolysis of water has the advantage of converting solar energy directly to hydrogen, an ideal non-carbon and nonpolluting energy carrier, by replacing both a photovoltaic array and an electrolysis unit with one potentially inexpensive device. Unfortunately no materials are currently known to efficiently photoelectrolyze water that are, efficient, inexpensive and stable under illumination in electrolytes for many years. Nanostructured semiconducting metal oxides could potentially fulfill these requirements, making them the most promising materials for solar water photoelectrolysis, however no oxide semiconductor has yet been discovered with all the required properties. We have developed a simple, high-throughput combinatorial approach to prepare and screen many multi component metal oxides for water photoelectrolysis activity. The approach uses ink jet printing of overlapping patterns of soluble metal oxide precursors onto conductive glass substrates. Subsequent pyrolysis produces metal oxide phases that are screened for photoelectrolysis activity by measuring photocurrents produced by scanning a laser over the printed patterns in aqueous electrolytes. Several promising and unexpected compositions have been identified.

36 MATERIALS SCIENCE↗

New Photocathode materials for electron-ion-colliders

Our aim has been to explore new photocathode materials and schemes to develop strategies and technologies for next generation nuclear physics accelerator capabilities, particularly for Electron Ion Colliders (EIC). Thus, we investigated thin film deposition and ensuing properties for several adequate magnetic materials applicable to spin-polarized photocathodes. We also implemented a full experimental setup for light incidence at an acute angle onto the photocathode surface in order to excite surface Plasmon resonance hence increasing light absorption by a metallic surface. We successfully tested the setup with a thermionic cathode as well as Plasmonic silver-MgO samples and obtained very encouraging results. Our first results are very encouraging since the photocurrent measured on this preliminary plasmonic Ag-MgO sample under low power (~ 1mW) cw red light from a HeNe laser was 256 pA, thus two orders magnitude larger than that reported by others following also plasmonic approaches. We extended our studies to shorter wavelengths and we also started preliminary work on chemically ordered MnAl thin films –a component of the tertiary Ag-Mn-Al (silmanal) alloy in order to develop spin-polarized photocathodes capable of sustaining surface Plasmon resonance. It is worthwhile mentioning that a graduate student has been directly involved during this project ensuring the training of next generation of scientists in this area of research.

43 PARTICLE ACCELERATORS↗

Graphene Charge Transfer, Spectroscopy, and Photochemical Reactions

This project focused on the special electronic and optical properties of graphene and adsorbed molecular species. Graphene makes an excellent substrate for current collection in nanostructured photovoltaic designs. Graphene is almost transparent, and can be used as a solar cell window. It also has no surface states, and thus current is efficiently transported over long distances. Progress in graphene synthesis indicates that there will soon be practical methods for making large pieces of graphene for devices. We now need to understand exactly what happens to both ground state and electronically excited molecules and Qdots near graphene, if we are going to use them to absorb light in a nano-structured photovoltaic device using graphene to collect photocurrent. We also need to understand how to shift the graphene Fermi level, to optimize the kinetics of electron transfer to graphene. And we need to learn how to convert local graphene areas to semiconductor structure, to make useful spatially patterned graphenes. In this final report, we describe how we addressed these goals. We explored the question of possible Surface Enhanced Raman spectroscopy from molecular Charge Transfer onto Graphene substrates. We observed strong hole doping of graphene by adsorbed halogens as indicated by the shift of the graphene G Raman band. In the case of iodine adsorption, we also observed the anionic species made by hole doping. At low frequency in the Raman spectrum, we saw quite intense lines from I 3 - and I 5 - , suggesting possible SERS. We reported on Fresnel calculations on this thin film system, which did not show any net electromagnetic field enhancement.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Precision and Accuracy in PDV and VISAR

This is a technical report discussing our current level of understanding of a wide and varying distribution of uncertainties in velocity results from Photonic Doppler Velocimetry in its application to gas gun experiments. Using propagation of errors methods with statistical averaging of photon number fluctuation in the detected photocurrent and subsequent addition of electronic recording noise, we learn that the velocity uncertainty in VISAR can be written in closed form. For PDV, the non-linear frequency transform and peak fitting methods employed make propagation of errors estimates notoriously more difficult to write down in closed form expect in the limit of constant velocity and low time resolution (large analysis-window width). An alternative method of error propagation in PDV is to use Monte Carlo methods with a simulation of the time domain signal based on results from the spectral domain. A key problem for Monte Carlo estimation for an experiment is a correct estimate of that portion of the time-domain noise associated with the peak-fitting region-of-interesting in the spectral domain. Using short-time Fourier transformation spectral analysis and working with the phase dependent real and imaginary parts allows removal of amplitude-noise cross terms that invariably show up when working with correlation-based methods or FFT power spectra. Estimation of the noise associated with a given spectral region of interest is then possible. At this level of progress, we learn that Monte Carlo trials with random recording noise and initial (uncontrolled) phase yields velocity uncertainties that are not as large as those observed. In a search for additional noise sources, a speckleinterference modulation contribution with off axis rays was investigated, and was found to add a velocity variation beyond that from the recording noise (due to random interference between off axis rays), but in our experiments the speckle modulation precision was not as important as the recording noise precision. But from these investigations we do appreciate that the velocity-uncertainty itself has a wide distribution of values that varies with signal-amplitude modulation (is not a single value). To provide a rough rule of thumb for the velocity uncertainty, we computed the average of the relative standard deviation distributions from 60 recorded traces (with distributions of uncertainties roughly between 0.1 % to 1 % in each trace) and found a mean of the distribution of uncertainties for our experiments is not better than 0.4 % at an analysis window width of 5 ns (although for brief intervals it can be as good as 0.1 %). Further imagination and testing may be needed to reveal other possible hydrodynamics-related sources of velocity error in PDV.

47 OTHER INSTRUMENTATION↗

Thin film studies toward improving the performance of accelerator electron sources

Future electron accelerators require DC high voltage photoguns to operate beyond the present state of the art to conduct new experiments that require ultra-bright electron beams with high average current and higher bunch charge. To meet these demands, the accelerators must demonstrate improvements in a number of photogun areas including vacuum, field emission elimination in high voltage electrodes, and photocathodes. This dissertation illustrates how these improvements can be achieved by the application of suitable thin-films to the photogun structure for producing ultra-bright electron beams. This work is composed of three complementary studies. First, the outgassing rates of three nominally identical 304L stainless steel vacuum chambers were studied to determine the effects of chamber coatings (silicon and titanium nitride) and heat treatments. For an uncoated stainless steel chamber, the diffusion limited outgassing was taken over by the recombination limited process as soon as a low outgassing rate of ~1.79(±0.05) x 10- 13 Torr L s -1 cm -2 was achieved. An amorphous silicon coating on the stainless steel chambers exhibited recombination limited behavior and any heat treatment became ineffective in reducing the outgassing rate. A TiN coated chamber yielded the smallest apparent outgassing rate of all the chambers: 6.44(±0.05) x 10 -13 Torr L s -1 cm -2 following an initial 90 °C bake and 2(±20) x 10 -16 Torr L s -1 cm -2 following the final bake in the series. This perceived low outgassing rate was attributed to the small pumping nature of TiN coating itself. Second, the high voltage performance of three TiN-coated aluminum electrodes, before and after gas conditioning with helium, were compared to that of bare aluminum electrodes and electrodes manufactured from titanium alloy (Ti-6Al-4V). This study suggests that aluminum electrodes, coated with TiN, could simplify the task of implementing photocathode cooling, which is required for future high current electron beam applications. The best performing TiN-coated aluminum electrode demonstrated less than 15 pA of field emission current at -- 175 kV for a 10 mm cathode/anode gap, which corresponds to a field strength of 22.5 MV/m. Third, the effect of antimony thickness on the performance of bialkali-antimonide photocathodes was studied. The high-capacity effusion source enabled us to successfully manufacture photocathodes having a maximum QE around 10% and extended low voltage 1/e lifetime (> 90 days) at 532 nm via the co-deposition method, with relatively thick layers of antimony (≥ 300 nm). We speculate that alkali co-deposition provides optimized stoichiometry for photocathodes manufactured using thick Sb layers, which could serve as a reservoir for the alkali. In summary, this research examined the effectiveness of thin films applied on photogun chamber components to achieve an extremely high vacuum, to eliminate high voltage induced field emission from electrodes, and to generate photocurrent with high quantum yield with an extended operational lifetime. Simultaneous implementation of these findings can meet the challenges of future ultra-bright photoguns.

42 ENGINEERING↗

Study of Multiple Exciton Generation with New Multi-dimensional Spectroscopies

Multiple exciton generation is a process that can occur in semiconductor nanocrystals small enough that their electronic properties deviate from that of the bulk semiconductor. Such small nanocrystals are known as quantum dots. At the time this project began, there were reports that multiple exciton generation in quantum dots was far more efficient than the analogous process of charge carrier multiplication in bulk semiconductors. In bulk semiconductors, this effect requires ultraviolet light, but is used for high energy photo-detectors. By exploiting enhanced photocurrent from photons with more than twice the bandgap energy, carrier multiplication is a potential route to more efficient photovoltaics using quantum dots with infrared bandgaps. The reports of enhanced multiple exciton generation in such materials motivated the fundamental investigations of the multiple exciton generation mechanism in this project. These experimental investigations showed that the initial charge carrier dynamics after exciting low bandgap quantum dots with photons far above bandgap are not those of the bound electron-hole pairs known as excitons, but rather those of the rapidly separating charge carriers found in the bulk semiconductor at similar excitation energies. This result was theoretically explained in terms of new fundamental criteria for size dependent changes in the optical properties of semiconductors. This result indicates that any new mechanism for multiple exciton generation must arise from the larger surface area to volume ratio of quantum dots. Several artifacts arising from repetitive excitation, poorly passivated quantum dot surfaces, and oxygen exposure were found. After eliminating these artifacts, investigations of the backward reaction have confirmed that its rate does increase as size decreases, in accord with theory, but were not able to isolate surface effects. Using two-dimensional electronic spectroscopy to investigate the influence of the surface upon excitation at the bandgap found no measurable effect. These studies indicate that better control of the quantum dot surface would be required to optimize multiple exciton generation for photovoltaics.

14 SOLAR ENERGY↗

A Hybrid Biological-Organic Photochemical Half-Cell for Generating Dihydrogen

In this final report we describe our work on the fabrication of a hybrid biological/organic photochemical half-cell that couples Photosystem I, which produces electrons at a highly reducing redox potential, with a hydrogenase enzyme, which catalyzes H 2 evolution at high rates when provided with a source of electrons. We considered it far too ambitious at the present stage of knowledge to attempt to design a system that carries out the reaction 2H 2 O + 8hv → 2H 2 + O 2 in a single photochemical step, hence, we focused our work on optimizing the half-cell reaction 2H + + 2e - + 2hv → H 2 . The challenge has been to deliver low-potential electrons from PS I to H 2 ase rapidly, at high quantum yield, and with high thermodynamic efficiency. To accomplish this, we engineered a molecular wire that connects the [4Fe-4S] clusters of PS I with those of the hydrogenase enzyme. In doing so, the highly reducing electrons generated by PS I are transferred by quantum mechanical tunneling to the enzyme. The core idea was to connect the terminal Fe/S cluster of Photosystem I to the distal Fe/S cluster of H 2 ase through a covalently bonded “molecular wire” consisting of an 8-carbon hydrocarbon wire terminated on both ends with a sulfhydryl group. By providing a direct electron transfer pathway through signa bonds, diffusion chemistry is avoided, and, because the tether length and redox potentials were properly chosen, a rate of electron transfer between the two enzymes was achieved that twice exceeded the rate of electron transfer in natural photosynthesis. We also devised a way to utilize the FA and FB clusters of Photosystem I to serve as a reservoir so that electrons could be extracted from the quinone binding sites and passed through a similar molecular wire to the bound hydrogenase. The additional induction of the IsiA antenna pigments by iron starvation led to an optical cross section twice that of the naturally-occurring Photosystem I, thus further raising the rates of electron transfer to the enzyme. We were likewise able to re-engineer a naturally-occurring dicluster ferredoxin to replace the hydrocarbon molecular wire as the tether between Photosystem I and the hydrogenase enzyme. Finally, we developed techniques to place Photosystem I on electrodes and in block copolymer interfaces and we were able to measure photocurrents approaching 35.0 ± 3.5 mA cm -2 upon illumination of these assembled devices, which are among the highest reported so far for such systems on a per protein basis.

14 SOLAR ENERGY↗

Focal Plane Array Low Background Testing (Focal Plane Array Characterization under a Low Background)

Most infra-red (IR) imagers for tactical applications use a direct injection (DI) input amplifier design. Fewer transistors in the unit cell allow the read-out electronic circuit (ROIC) to be minimized. This allows either more room for charge integration capacitors or finer pixel pitches. These ROICs work well at high background irradiance levels. However, at low background irradiance levels photocurrent inject efficiency for a DI unit cell amplifier is reduced. Some models have shown that this efficiency can drastically affect performance under low background conditions. The main benefit for Sandia National Laboratories (SNL) and L-3 Communications Cincinnati Electronics (L-3) was a better understanding of these types of sensors under low background conditions. It also provided the opportunity for an independent analysis of these sensors. The purpose of this project was to measure DI for low light levels under different operating temperatures of the L-3 CE103 a 1280 x 1024 indium antimonide 15 micron pitch detector. Results showed DI efficiency approaches 75% under extremely low light levels. Additionally, measured data didn't conform well to traditional circuit based models indicated that other effects are contributing to DI efficiency. A "spot scanning" PSF measurement was also conducted to measure pixel-to-pixel crosstalk for this array. Spot scanning data showed near ideal performance.

47 OTHER INSTRUMENTATION↗

Wide Band Gap Chalcopyrite Photoelectrodes for Direct Water Splitting (Final Technical Report)

The chalcopyrite material class, typically identified by its most popular alloy CuInGaSe 2 , provides exceptionally good candidates for photoelectrochemical (PEC) water splitting and has the potential to meet DoE EERE’s targets in terms of hydrogen production costs (less than $2/gge). Some key advantages of this class include remarkable photon-to-electron conversion efficiency and a high Faradaic efficiency for the hydrogen evolution reaction, two characteristics essential for efficient PEC water splitting. However, the band gaps of commonly used chalcopyrites in the photovoltaic field (1.0-1.6 eV) are too narrow to be compatible with the multi-junction approach for efficient PEC hydrogen production, in which a stack of solar absorbers generates the bias required for water splitting. Nonetheless, previous studies performed by our team demonstrated that chalcopyrites’ narrow band gaps could be effectively widened using simple conversion steps, leading to functional chalcopyrite-based PEC electrodes with optical band gap in the 1.8-2.4 eV range, making this class highly suitable for renewable hydrogen production via water splitting. This multi-disciplinary research program lead by the University of Hawai’i/Hawai’i Natural Energy Institute combined unique analytical techniques (UNLV), state-of-the-art theoretical modeling (LLNL) with advanced thin film materials synthesis (HNEI, NREL and Stanford) to provide deeper understanding of wide band gap chalcopyrite-based PEC materials and engineer high performance/corrosion-resistant photocathodes with tunable energetics and compatible with the multi-junction approach. The goals of this project were to demonstrate photoelectrochemical (PEC) solar-hydrogen production using a dual absorber system with a solar-to-hydrogen conversion efficiency of at least 15% with an operational life up to 2,000 hours and capable of generating at least 3 liters of hydrogen in 8 hours. After a brief introduction (Section 1) and description of our work plan (Section 2), we present in Section 3 our results on the development of new wide bandgap copper chalcopyrites absorbers for PEC waters splitting. We first show through modeling how alloying can be used to tailor the optical properties and/or surface energetics of various material candidates. We also present how specific defects (e.g., GaCu) can lead to recombination centers within the forbidden gap of copper-poor chalcopyrites. Then, we present our efforts to synthesize high efficiency wide band gap CuGa 3 Se 5 , CuGa(S,Se) 2 and Cu(In,Ga)S 2 photocathodes capable of generating photocurrent density over 10 mA/cm 2 . We also demonstrate that Cu-rich absorbers should be avoided as they lead to poor sub-band gap optical transmission. In Section 4, we first report on our efforts to tune the energetics of chalcopyrites toward the hydrogen evolution reaction. First, we quantified the energetics of wide band gap chalcopyrites interfaced with conventional CdS buffer layer, as measured with X-ray photoelectron spectroscopy techniques, and evidence the presence of a large (and undesirable) conduction band offset at this interface. Then, we highlight some of the work performed with alternative buffer layers, including In 2 S 3 . Durability improvements with various ultra-thin protective layers are presented in Section 5. Our data show that TiO 2 combined with MoS 2 can significantly improve chalcopyrites lifetime up to 350 hours under continuous operation at 8 mA/cm 2 . Finally, in Section 6 we report strategies to integrate chalcopyrite photocathodes into standalone tandem PEC devices. Although promising methods were proposed for both mechanical and monolithic stacking with narrow band gap PV drivers, no functional device was fabricated on time to fulfill the program end goals.

08 HYDROGEN↗