Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Parameter Identifiability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

LV software support for supersonic flow analysis

During 1991, the software developed allowed an operator to configure and checkout the TSI, Inc. laser velocimeter (LV) system prior to a run. This setup procedure established the operating conditions for the TSI MI-990 multichannel interface and the RMR-1989 rotating machinery resolver. In addition to initializing the instruments, the software package provides a means of specifying LV calibration constants, controlling the sampling process, and identifying the test parameters.

Bell, William A.↗

Pratt and Whitney Activities

An example of Computational Fluid Dynamics (CFD) application in the seal area is described. This effort consisted of optimizing specific seals in the Space Shuttle Main Engine Alternate Turbopump Development (SSME ATD) and resulted in design of a seal tested which demonstrated 30 percent lower leakage than the standard design at the same clearance. This example shows the potential of identifying seal geometry parameters which reduce internal flow leakages detrimental to component and turbopump efficiencies. This information can than be used to develop an analytical design procedure for controlling leakage in any given application or environment.

Syed, Saadat A.↗

Dynamic modeling of the servovalves incorporated in the servo hydraulic system of the 70-meter DSN antennas

As the pointing accuracy and service life requirements of the DSN 70 meter antenna increase, it is necessary to gain a more complete understanding of the servo hydraulic system in order to improve system designs to meet the new requirements. A mathematical model is developed for the servovalve incorporated into the hydraulic system of the 70 meter antenna and uses experimental data to verify the validity of the model and to identify the model parameters.

Bartos, R. D.↗

Automated screening of propulsion system test data by neural networks, phase 1

The evaluation of propulsion system test and flight performance data involves reviewing an extremely large volume of sensor data generated by each test. An automated system that screens large volumes of data and identifies propulsion system parameters which appear unusual or anomalous will increase the productivity of data analysis. Data analysts may then focus on a smaller subset of anomalous data for further evaluation of propulsion system tests. Such an automated data screening system would give NASA the benefit of a reduction in the manpower and time required to complete a propulsion system data evaluation. A phase 1 effort to develop a prototype data screening system is reported. Neural networks will detect anomalies based on nominal propulsion system data only. It appears that a reasonable goal for an operational system would be to screen out 95 pct. of the nominal data, leaving less than 5 pct. needing further analysis by human experts.

Hoyt, W. Andes↗

Computer aided design of digital controller for radial active magnetic bearings

A five degree of freedom Active Magnetic Bearing (AMB) system is developed which is controlled by digital controllers. The model of the radial AMB system is linearized and the state equation is derived. Based on the state variables feedback theory, digital controllers are designed. The performance of the controllers are evaluated according to experimental results. The Computer Aided Design (CAD) method is used to design controllers for magnetic bearings. The controllers are implemented with a digital signal processing (DSP) system. The control algorithms are realized with real-time programs. It is very easy to change the controller by changing or modifying the programs. In order to identify the dynamic parameters of the controlled magnetic system, a special experiment was carried out. Also, the online Recursive Least Squares (RLS) parameter identification method is studied. It can be realized with the digital controllers. Online parameter identification is essential for the realization of an adaptive controller.

Cai, Zhong↗

Heat sources for tertiary metamorphism and anatexis in the Annapurna-Manaslu region, central Nepal

The metamorphic evolution of the rocks near the Main Central Thrust in the Annapurna-Manaslu region of central Nepal is examined. In this region, all three types of metamorphic features can be observed: regional metamorphism, anatectic granitoids, and inverted metamorphic isograds. In this work, each phase of metamorphism is treated separately to estimate the heat sources required for each process. This approach makes it possible to identify the important parameters for each process, to draw preliminary conclusions about the heat sources required for each of these phases, and to determine which parameters need to be measured more precisely in order to constrain these heat sources.

England, Philip↗

Improvement of observer/Kalman filter identification (OKID) by residual whitening

This paper presents a time-domain method to identify a state space model of a linear system and its corresponding observer/Kalman filter from a given set of general input-output data. The identified filter has the properties that its residual is minimized in the least squares sense, orthogonal to the time-shifted versions of itself, and to the given input-output data sequence. The connection between the state space model and a particular auto-regressive moving average description of a linear system is made in terms of the Kalman filter and a deadbeat gain matrix. The procedure first identifies the Markov parameters of an observer system, from which a state space model of the system and the filter gain are computed. The developed procedure is shown to improve results obtained by an existing observer/Kalman filter identification method, which is based on an auto-regressive model without the moving average terms. Numerical and experimental results are presented to illustrate the proposed method.

Phan, Minh↗

CO2 laser preionisation

The final report for work done during the reporting period of January 25, 1990 to January 24, 1991 is presented. A literature survey was conducted to identify the required parameters for effective preionization in TEA CO2 lasers and the methods and techniques for characterizing preionizers are reviewed. A numerical model of the LP-140 cavity was used to determine the cause of the transverse mode stability improvement obtained when the cavity was lengthened. The measurement of the voltage and current discharge pulses on the LP-140 were obtained and their subsequent analysis resulted in an explanation for the low efficiency of the laser. An assortment of items relating to the development of high-voltage power supplies is also provided. A program for analyzing the frequency chirp data files obtained with the HP time and frequency analyzer is included. A program to calculate the theoretical LIMP chirp is also included and a comparison between experiment and theory is made. A program for calculating the CO2 linewidth and its dependence on gas composition and pressure is presented. The program also calculates the number of axial modes under the FWHM of the line for a given resonator length. A graphical plot of the results is plotted.

Spiers, Gary D.↗

Problem footprints in Magellan altimetry data

The intensity, time-delay, and frequency content of radar echoes from the Magellan altimetry system are reduced to several parameters that are of great use in addressing many geological issues of the surface of Venus. These parameters include planetary radius, power reflection coefficient (reflectivity, both uncorrected and corrected for diffuse scattering), rms slope, and scattering functions (the behavior of backscatter as a function of incidence angle). Because the surface of Venus often reflects radio energy in unpredictable ways, models of radar scattering and their associated algorithms occasionally fail to accurately solve for the above surface parameters. Methods for identifying possible 'problem' altimetry data footprints, and techniques for resolving some key ambiguities are presented.

Plaut, Jeffrey J.↗

Practical aspects of transfer from GTO to lunar orbit

This paper is a presentation of some practical aspects of orbital transfer from Geosynchronous Transfer Orbit (GTO) to close, near-circular orbits of the Moon. The intent is to identify the important parameters affecting the problem and to bound (approximately) the range of required delta V for a spacecraft that has been placed in GTO. The basic geometric relationships are described and the dynamics are simulated by use of the Zero-Sphere-of Influence Patched Conic method. It is found that the inclination of the transfer orbit to the Earth-Moon plane is relatively unimportant while the position of the line of apsides with respect to the Moon's orbit is the main geometric parameter of interest. It is shown that this parameter can be controlled by selecting the time of day for launch and that two launch windows of approximately 45 minutes duration are available each day of the year if use is made of the recommended phasing orbit transfer. The phasing orbit transfer not only provides twice-daily launch windows, but also provides a mechanism for efficacious correction of GTO injection errors. Delta V penalties for out-of-plane transfer and for late launch are evaluated and the method is recommended for use as an affordable means of achieving lunar orbit.

Uphoff, Chauncey↗

Modelling and performance of Nb SIS mixers in the 1.3 mm and 0.8 mm bands

We describe the modeling and subsequent improvements of SIS waveguide mixers for the 200-270 and 330-370 GHz bands (Blundell, Carter, and Gundlach 1988, Carter et al 1991). These mixers are constructed for use in receivers on IRAM radiotelescopes on Pico Veleta (Spain, Sierra Nevada) and Plateau de Bure (French Alps), and must meet specific requirements. The standard reduced height waveguide structure with suspended stripline is first analyzed and a model is validated through comparison with scale model and working scale measurements. In the first step, the intrinsic limitations of the standard mixer structure are identified, and the parameters are optimized bearing in mind the radioastronomical applications. In the second step, inductive tuning of the junctions is introduced and optimized for minimum noise and maximum bandwidth. In the 1.3 mm band, a DSB receiver temperature of less than 110 K (minimum 80 K) is measured from 180 through 260 GHz. In the 0.8 mm band, a DSB receiver temperature of less than 250 K (minimum 175 K) is obtained between 325 and 355 GHz. All these results are obtained with room-temperature optics and a 4 GHz IF chain having a 500 MHz bandwidth and a noise temperature of 14 K.

Karpov, A.↗

Gravity and suspension effects on the dynamics of controlled structures

The effects of gravity on the actuators, sensors and structural plant of a controlled flexible structure are investigated. These influences include gravity stiffening, gravity induced deformations, gravity influence on inertial sensors and actuators, and the interaction with the suspension system. For each of the four influences, a simplified model is derived, from which the appropriate non-dimensional parameter can be identified, and the magnitude of the influence estimated. The construction of a detailed numerical model, which includes the four gravity influences, is outlined. This modeling procedure is then applied to a simplified model of the Middeck Active Control Eperiment (MACE). The influence on the poles and input-output transfer function is examined for several variations in the plant. The modeling procedure is also applied to the MACE experimental hardware. Experimental and model-based transfer functions are compared to demonstrate the significant improvement by incorporating gravity effects.

Rey, Daniel A.↗

The structure of protostellar accretion disks and the origin of bipolar flows

Equations are obtained which govern the disk-wind structure and identify the physical parameters relevant to circumstellar disks. The system of equations is analyzed in the thin-disk approximation, and it is shown that the system can be consistently reduced to a set of ordinary differential equations in z. Representative solutions are presented, and it is shown that the apparent paradox discussed by Shu (1991) is resolved when the finite thickness of the disk is taken into account. Implications of the results for the origin of bipolar flows in young stellar objects and possible application to active galactic nuclei are discussed.

Wardle, Mark↗

CPL Materials Life Cycle Test Facility

The Capillary Pumped Loop (CPL) Materials Life Cycle Test Facility at the Goddard Space Flight Center (GSFC) will identify the operational parameters controlling the performance of a CPL over an extended period of time. The primary purpose of the facility is to investigate the long-term chemical compatibility between the anhydrous ammonia working fluid and the CPL materials of construction. Chemical reactions occurring within the system may produce non-condensable gases or particulate debris that can lead to a degradation in system performance. Small liquid samples will be drawn from the system at specific time intervals and analyzed to check for the presence of non-condensable gases. Periodic maximum and minimum heat load tests will be performed on the CPL to monitor trends in the overall system performance.

Buchko, Matthew T.↗

Asymptotic analysis for the burning of n-heptane droplets using a four-step reduced mechanism

A four-step reduced mechanism is obtained from a minimal chemical-kinetic description, where the effects of the elementary rates are treated as parameters in the expressions for the global rates. This mechanism is used to analyze the extinction characteristics of a single n-heptane droplet burning under quasi-steady, spherically symmetrical conditions. The reaction layer consists of a merged inner zone, on the fuel-rich side of the flame, where fuel and H atoms are consumed thereby producing H2 and CO along with H2O and CO2, and an oxygen-consumption zone, on the fuel-lean side, where H2 and CO are oxidized to produce additional H2O and CO2 along with H radicals. For the inner zone, a parameter mu is identified which describes the ratio of the thickness of a fuel-consumption layer to that of an H-recombination layer. Analytical solutions for the rate of scalar dissipation at extinction are obtained in the limiting cases of mu tending to 0 and mu tending to infinity. From the results of the analysis, extinction diameters for n-heptane droplets are estimated for different pressures and ambient oxygen concentrations.

Card, J. M.↗

Application of the target decomposition theorem to a polarimetric random media model

With advances in polarimetric radar measurements of land surfaces, the need for understanding the underlying scattering mechanisms and dominant target features has become the focus of many studies. In particular, the maximum use of the polarimetric information to identify and/or separate parameters related to the surface features such as vegetation thickness, structure, water content, and soil surface characteristics will enhance the possibility of using polarimetric radars for monitoring the earth's surface from space. In this paper, Cloude's decomposition theorem is applied to a polarimetric random media model to simulate the radar measurements of vegetated canopies. The vegetated canopies are modeled as a three layer discrete random medium with leaves and branches in the first layer, tree trunks in the second layer, and a half space of homogeneous ground with rough interface as the bottom layer. The distorted born approximation (DBA) has been used to compute full Mueller matrix of the canopy, using canonical dielectric objects such as thin discs and cylinders as leaves, branches, and trunks, respectively. The Mueller matrix and the derived covariance matrix contain information on the second order statistics of radar signals at various polarizations from the canopy. To decompose the covariance matrix to its constituent targets, the eigenvalues and eigenvectors of the covariance matrix are computed in terms of the physical parameters of the canopy. In addition, each eigenvector explicitly shows the scattering mechanisms such as odd and even reflections in the canopy. Cloude's decomposition theorem is applied using the Pauli spin matrices as a basis and an expression for the degree of disorder or the entropy for the vegetated surface is found. Then, the physical parameters estimated from in situ measurements are used in the random media to obtain realistic covariance matrices. As a result, the sensitivity of the eigenvalue spectrums and the coefficients resulting from the target decomposition theorem to the physical parameters of the canopy are examined and the possible use of Cloude's theorem to estimate vegetation and soil parameters is discussed.

Saatchi, Sasan S.↗

The Use of Kirchhoff's Method in Jet Aeroacoustics

Supersonic jet aeroacoustics will be studied using computational techniques. In the study, a Kirchhoff method is used to predict flow generated noise in the mid- and far-fields. This type of method shows promise because it is based on surface integrals and not the volume integrals found in traditional acoustic prediction methods. The Kirchhoff method is dependent on accurate prediction of flow variables in the near-field. Here, computational fluid dynamics (CFD) programs are used for these predictions. Specifically, an existing large eddy simulation (LES) code will be modified for aeroacoustic applications. Issues involved in the implementation of the Kirchhoff method as well as the coupling with the CFD code will be discussed. Important physical noise parameters will be identified and investigated in the study.

Lyrintzis, Anastasios S.↗

Estimates of Long Term Surface Soil Moisture in the Midwestern U.S. Derived from Satellite Microwave Observations

Soil moisture is a key component of the water and energy balances of the Earth's surface, and has been identified as a parameter of significant potential for improving the accuracy of large-scale land surface-atmosphere interaction models. However, soil moisture is often somewhat difficult to measure accurately in both space and time, especially at large spatial scales. Soil moisture is highly variable, and while point measurements are typically quite accurate, subsequent areal averaging of these measurements often leads to large errors. Since remotely sensed land surface observations are already a spatially averaged or areally integrated value, they are a logical input parameter to regional or larger scale land process models. A database of long-term soil moisture was compared to satellite microwave observations over test sites in the Midwestern United States. Ground measurements of average volumetric surface soil moisture in the top ten cm were made bimonthly at 19 locations throughout the state of Illinois. Nighttime microwave brightness temperatures were observed at a frequency of 6.6 GHz, by the Scanning Multichannel Microwave Radiometer (SMMR), onboard the Nimbus 7 satellite. The life of the SMMR instrument spanned from Nov. 1978 to Aug. 1987. At 6.6 GHz, the instrument provided a spatial resolution of approximately 150 km, and a temporal frequency over the test area of about 3 nighttime orbits per week. Vegetation radiative transfer characteristics, such as the canopy transmissivity, were estimated from vegetation indices such as the Normalized Difference Vegetation Index (NDVI) and the 37 GHz Microwave Polarization Difference Index (MPDI). Because the time of satellite coverage does not always coincide with the ground measurements of soil moisture, the existing ground data were used to calibrate a water balance for the top IO cm surface layer in order to interpolate daily surface moisture values. Such a climate-based approach is often more appropriate for estimating large-area average soil moisture because meteorological data are generally more spatially representative than isolated point measurements of soil moisture, Passive microwave remote sensing presents the greatest potential for providing regular spatially representative estimates of surface soil moisture at global scales. Real time estimates should improve weather and climate modelling efforts, while the development of historical data sets will provide necessary information for simulation and validation of long-term climate and global change studies.

Owe, M.↗