Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PROPANE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Kinetics of ignition of saturated hydrocarbons by nonequilibrium plasma: C{sub 2}H{sub 6} -to C{sub 5}H{sub 12}-containing mixtures

The kinetics of ignition in C{sub n}H{sub 2n+2}:O{sub 2}:Ar mixtures for n=2 to 5 has been studied experimentally and numerically after a high-voltage nanosecond discharge. The ignition delay time behind a reflected shock wave was measured with and without the discharge. It was shown that the initiation of the discharge with a specific deposited energy of 10-30 mJ/cm{sup 3} leads to an order of magnitude decrease in the ignition delay time. Discharge processes and following chain chemical reactions with energy release were simulated. The generation of atoms, radicals and excited and charged particles was numerically simulated using the measured time-resolved discharge current and electric field in the discharge phase. The calculated densities of the active particles were used as input data to simulate plasma-assisted ignition. The sensitivity of the results to variation in electron cross sections, reaction rates and radical composition was investigated. Good agreement was obtained between the calculated ignition delay times and the experimental data. The analysis of the simulation results showed that the effect of nonequilibrium plasma on the ignition delay is associated with faster development of chain reactions, due to atoms and radicals produced by the electron impact dissociation of molecules in the discharge phase. Finally, we studied the role of various hydrocarbon radicals in the plasma-assisted ignition of the mixtures under consideration. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural study of non-premixed tubular hydrocarbon flames

Tubular non-premixed flames are formed by a uniquely designed opposed tubular burner. Structural measurements of hydrocarbon flames are conducted using the laser-induced Raman scattering technique. Temperature and major species concentrations are recorded for flames produced by 30% CH{sub 4}/N{sub 2} and 15% C{sub 3}H{sub 8}/N{sub 2} burning against air. Numerical simulations of these flames with detailed chemistry show good agreement between the measured and simulated results. By comparing the numerical results of the tubular curved flames to those of the opposed-jet planar flames, it is shown that flame curvature towards the fuel stream strongly effects the temperature ({+-}80 K) of flames with low fuel Lewis number (15% H{sub 2}/N{sub 2}, Le{sub f} = 0.41). The effect of curvature on flames with high (15% C{sub 3}H{sub 8}/N{sub 2}, Le{sub f} = 1.51) and near-unity (30% CH{sub 4}/N{sub 2}, Le{sub f}{approx_equal}1) fuel Lewis numbers is much less. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Extinction and near-extinction instability of non-premixed tubular flames

Tubular non-premixed flames are formed by an opposed tubular burner, a new tool to study the effects of curvature on extinction and flame instability of non-premixed flames. Extinction of the opposed tubular flames generated by burning diluted H{sub 2}, CH{sub 4} or C{sub 3}H{sub 8} with air is investigated for both concave and convex curvature. To examine the effects of curvature on extinction, the critical fuel dilution ratios at extinction are measured at various stretch rates, initial mixture strengths and flame curvature for fuels diluted in N{sub 2}, He, Ar or CO{sub 2}. In addition, the onset conditions of the cellular instability are mapped as a function of stretch rates, initial mixture strengths, and flame curvature. For fuel mixtures with Lewis numbers much less than unity, such as H{sub 2}/N{sub 2}, concave flame curvature towards the fuel suppresses cellular instabilities. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of fuel type and equivalence ratios on the flickering of triple flames

An experimental study has been conducted in axisymmetric, co-flowing triple flames with different equivalence ratios of the inner and outer reactant streams (2<{phi}{sub in}<3 and 0{<=}{phi}{sub out}<0.7). Different fuel combinations, like propane/propane, propane/methane or methane/methane in the inner and outer streams respectively, have been used in the experiments. The structures of the triple flames have been compared for the different fuel combinations and equivalence ratios. The conditions under which triple flames exhibit oscillation have been identified. During the oscillation, the non-premixed flame and the outer lean premixed flame flicker strongly, while the inner rich premixed flame remains more or less stable. The flickering frequency has been evaluated through image processing and fast Fourier transform (FFT) of the average pixel intensity of the image frames. It is observed that, for all the fuel combinations, the frequency decreases with the increase in the outer equivalence ratio, while it is relatively invariant with the change in the inner equivalence ratio. However, an increase in the inner equivalence ratio affects the structure of the flame by increasing the heights of the inner premixed flame and non-premixed flame and also enlarges the yellow soot-laden zone at the tip of the inner flame. A scaling analysis of the oscillating flames has been performed based on the measured parameters, which show a variation of Strouhal number (St) with Richardson number (Ri) as St {proportional_to} Ri{sup 0.5}. The fuel type is found to have no influence on this correlation. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Flame propagation enhancement by plasma excitation of oxygen. Part I: Effects of O{sub 3}

The thermal and kinetic effects of O{sub 3} on flame propagation were investigated experimentally and numerically by using C{sub 3}H{sub 8}/O{sub 2}/N{sub 2} laminar lifted flames. Ozone produced by a dielectric barrier plasma discharge was isolated and measured quantitatively by using absorption spectroscopy. Significant kinetic enhancement by O{sub 3} was observed by comparing flame stabilization locations with and without O{sub 3} production. Experiments at atmospheric pressures showed an 8% enhancement in the flame propagation speed for 1260 ppm of O{sub 3} addition to the O{sub 2}/N{sub 2} oxidizer. Numerical simulations showed that the O{sub 3} decomposition and reaction with H early in the pre-heat zone of the flame produced O and OH, respectively, from which the O reacted rapidly with C{sub 3}H{sub 8} and produced additional OH. The subsequent reaction of OH with the fuel and fuel fragments, such as CH{sub 2}O, provided chemical heat release at lower temperatures to enhance the flame propagation speed. It was shown that the kinetic effect on flame propagation enhancement by O{sub 3} reaching the pre-heat zone of the flame for early oxidation of fuel was much greater than that by the thermal effect from the energy contained within O{sub 3}. For non-premixed laminar lifted flames, the kinetic enhancement by O{sub 3} also induced changes to the hydrodynamics at the flame front which provided additional enhancement of the flame propagation speed. The present results will have a direct impact on the development of detailed plasma-flame kinetic mechanisms and provided a foundation for the study of combustion enhancement by O{sub 2}(a{sup 1}{delta}{sub g}) in part II of this investigation. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of multi-component diffusion and heat release on laminar diffusion flame liftoff

Numerical simulations were conducted of the liftoff and stabilization phenomena of laminar jet diffusion flames of inert-diluted C{sub 3}H{sub 8} and CH{sub 4} fuels. Both non-reacting and reacting jets were investigated, including multi-component diffusivities and heat release effects (buoyancy and gas expansion). The role of Schmidt number for non-reacting jets was investigated, with no conclusive Schmidt number criterion for liftoff previously arrived at in similarity solutions. The cold-flow simulation for He-diluted CH{sub 4} fuel does not predict flame liftoff; however, adding heat release reaction lead to the prediction of liftoff, which is consistent with experimental observations. Including reaction was also found to improve liftoff height prediction for C{sub 3}H{sub 8} flames, with the flame base location differing from that in the similarity solution - the intersection of the stoichiometric and iso-velocity (equal to 1-D flame speed) is not necessary for flame stabilization (and thus liftoff). Possible mechanisms other than that proposed for similarity solution may better help to explain the stabilization and liftoff phenomena. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrical probe diagnostics for the laminar flame quenching distance

A simplified theory, previously developed for the general case of weakly ionized gas flow, is used to predict electrical probe response when the flame is quenched on the probe surface. This theory is based on the planar model of space charge sheaths around the measuring electrode. For the flame quenching case, by assuming that the sheath thickness is comparable with the thermal boundary layer thickness, probe current can be related to flame quenching distance. The theoretical assumptions made to obtain the analytical formulation of probe current were experimentally proved by using direct visualization and high-frequency PIV. The direct visualization method was also used to validate the results of flame quenching distance values obtained with electrical probe. The electrical probe diagnostics have been verified for both head-on and sidewall flame quenching regimes and for stoichiometric methane/air and propane/air mixtures in a pressure range of 0.05-0.6 MPa. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of metastable rare-earth-iron mixed oxide with the hexagonal crystal structure

Rare-earth-iron mixed oxides with the rare earth/iron ratio=1 have either orthorhombic (o-REFeO{sub 3}) or hexagonal (h-REFeO{sub 3}) structure. h-REFeO{sub 3} is a metastable phase and the synthesis of h-REFeO{sub 3} is usually difficult. In this work, the crystallization process of the precursors obtained by co-precipitation and Pechini methods was investigated in detail to synthesize h-REFeO{sub 3}. It was found that the crystallization from amorphous to hexagonal phase and the phase transition from hexagonal to orthorhombic phase occurred at a similar temperature range for rare earth elements with small ionic radii (Er-Lu, Y). For both co-precipitation and Pechini methods, single-phase h-REFeO{sub 3} was obtained by shortening the heating time during calcination process. The hexagonal-to-orthorhombic phase transition took place by a nucleation growth mechanism and vermicular morphology of the thus-formed orthorhombic phase was observed. The hexagonal YbFeO{sub 3} had higher catalytic activity for C{sub 3}H{sub 8} combustion than orthorhombic YbFeO{sub 3}. - Graphical abstract: Although the synthesis of metastable hexagonal REFeO{sub 3} by the conventional method is difficult, we found that this phase is obtained by shortening the heating time of the precursor prepared by co-precipitation method. Highlights: Black-Right-Pointing-Pointer Synthesis of metastable REFeO{sub 3} with hexagonal structure by the co-precipitation method. Black-Right-Pointing-Pointer Hexagonal REFeO{sub 3} is obtained for the rare earth elements with small ionic radii. Black-Right-Pointing-Pointer Hexagonal-to-orthorhombic transformation of REFeO{sub 3}. Black-Right-Pointing-Pointer Catalytic activity of hexagonal REFeO{sub 3} for C{sub 3}H{sub 8} combustion.

36 MATERIALS SCIENCE↗

A comparative study of SrO and BaO doping to CeO{sub 2}-ZrO{sub 2}: Characteristic and its catalytic performance for three-way catalysts

Graphical abstract: Display Omitted Highlights: ► The prepared materials have a face-centered cubic structure and nanosize particles. ►Comparing to CZB, aged CZS has 494 μmol/g of OSC and 30 m{sup 2}/g of surface area. ► CZS and CZB have similar NO sorption and reductive properties and different H{sub 2} uptake. ► T{sub 50} of Pt-Rh/CZS/LA is as low as 199 °C for CO, 228 °C for NO, and 252 °C for C{sub 3}H{sub 8}. ► Pt-Rh/CZS/LA has wider working-window at 320 °C under different λ value. -- Abstract: Ceria-zirconia-strontia (Ce{sub 0.35}Zr{sub 0.55}Sr{sub 0.10}O{sub 1.9}) and ceria-zirconia-baria (Ce{sub 0.35}Zr{sub 0.55}Ba{sub 0.10}O{sub 1.9}) were synthesized using an oxidation-co-precipitation method with hydrogen peroxide (H{sub 2}O{sub 2}) as oxidant. The physical and chemical properties of the prepared materials were investigated using Brunauer–Emmett–Teller surface area characterization, transmission electron microscopy, X-ray diffraction, Raman spectra, X-ray photoelectron spectroscopy, and oxygen pulse reaction. The prepared materials were used in preparing three-way catalysts with low Pt and Rh content. Moreover, catalytic activities were evaluated at a fixed bed under a simulated gaseous mixture. The results are as follows: (1) the prepared materials have a face-centered cubic structure and are nano-sized; (2) aged Ce{sub 0.35}Zr{sub 0.55}Sr{sub 0.10}O{sub 1.9} has higher oxygen storage capacity (494 μmol/g), better thermal stability (30 m{sup 2}/g), good low-temperature reducibility, and high hydrogen uptake after TPR-redox cycles; (3) the light-off temperature (T{sub 50}) of Pt-Rh/CZS/LA can be as low as 199 °C for CO, 228 °C for NO, and 252 °C for C{sub 3}H{sub 8}; and (4) Pt-Rh/CZS/LA has a fairly wide working-window.

36 MATERIALS SCIENCE↗

Photocatalytic CO{sub 2} reduction by CH{sub 4} over montmorillonite modified TiO{sub 2} nanocomposites in a continuous monolith photoreactor

Highlights: • TiO{sub 2}/MMT supported monolith photo-reactor was tested for CO{sub 2} reduction with CH{sub 4}. • MMT inhibited crystal growth and enhanced TiO{sub 2} photo-activity in monolith reactor. • CO{sub 2} was reduced by CH{sub 4} to CO, CH{sub 3}OH, C{sub 2}H{sub 6}, C{sub 3}H{sub 6} and C{sub 3}H{sub 8} in a monolith reactor. • CO yield over TiO{sub 2}/MMT was 237.5 μmol g-catal.{sup −1} h{sup −1}, a 2.52 fold than TiO{sub 2}. • Stability test revealed TiO{sub 2}/MMT partially lost photo-activity in reused cyclic runs. - Abstract: In this study, the performance of montmorillonite (MMT) modified TiO{sub 2} nanocomposites for photocatalytic CO{sub 2} reduction with CH{sub 4} in a continuous monolith photoreactor has been investigated. The MMT modified TiO{sub 2} nanocomposites were dip-coated over monolith channels and were characterized by XRD, SEM, TEM, XPS, N{sub 2}-adsorption–desorption and UV–vis spectroscopy. The MMT produced anatase phase of TiO{sub 2} and reduced TiO{sub 2} crystallite size from 19 nm to 13 nm. CO was the major reduction product with a yield rate of 237.5 μmol g-catal.{sup −1} h{sup −1} over 10 wt.% MMT-loaded TiO{sub 2} at 100 °C, and CO{sub 2}/CH{sub 4} feed ratio 1.0. The photoactivity of MMT-loaded TiO{sub 2} monolithic catalyst was 2.52 times higher than bare TiO{sub 2}. Likewise, low concentrations of C{sub 2}H{sub 6}, CH{sub 3}OH, C{sub 3}H{sub 6} and C{sub 3}H{sub 8} were detected in the products mixture. These results inferred MMT modified TiO{sub 2} and monolith photoreactor were beneficial for enhancing photocatalysis process with appreciable productivity. The stability test revealed photoactivity of MMT-loaded TiO{sub 2} nanocomposites partially diminished in recycle runs.

36 MATERIALS SCIENCE↗

Physiologically based kinetic modeling of bioactivation and detoxification of the alkenylbenzene methyleugenol in human as compared with rat

This study defines a physiologically based kinetic (PBK) model for methyleugenol (ME) in human based on in vitro and in silico derived parameters. With the model obtained, bioactivation and detoxification of methyleugenol (ME) at different doses levels could be investigated. The outcomes of the current model were compared with those of a previously developed PBK model for methyleugenol (ME) in male rat. The results obtained reveal that formation of 1′-hydroxymethyleugenol glucuronide (1′HMEG), a major metabolic pathway in male rat liver, appears to represent a minor metabolic pathway in human liver whereas in human liver a significantly higher formation of 1′-oxomethyleugenol (1′OME) compared with male rat liver is observed. Furthermore, formation of 1′-sulfooxymethyleugenol (1′HMES), which readily undergoes desulfonation to a reactive carbonium ion (CA) that can form DNA or protein adducts (DA), is predicted to be the same in the liver of both human and male rat at oral doses of 0.0034 and 300 mg/kg bw. Altogether despite a significant difference in especially the metabolic pathways of the proximate carcinogenic metabolite 1′-hydroxymethyleugenol (1′HME) between human and male rat, the influence of species differences on the ultimate overall bioactivation of methyleugenol (ME) to 1′-sulfooxymethyleugenol (1′HMES) appears to be negligible. Moreover, the PBK model predicted the formation of 1′-sulfooxymethyleugenol (1′HMES) in the liver of human and rat to be linear from doses as high as the benchmark dose (BMD{sub 10}) down to as low as the virtual safe dose (VSD). This study shows that kinetic data do not provide a reason to argue against linear extrapolation from the rat tumor data to the human situation. -- Highlights: ► A PBK model is made for bioactivation and detoxification of methyleugenol in human. ► Comparison to the PBK model in male rat revealed species differences. ► PBK results support linear extrapolation from high to low dose and from rat to human.

60 APPLIED LIFE SCIENCES↗

Toxicological significance of renal Bcrp: Another potential transporter in the elimination of mercuric ions from proximal tubular cells

Secretion of inorganic mercury (Hg{sup 2+}) from proximal tubular cells into the tubular lumen has been shown to involve the multidrug resistance-associated protein 2 (Mrp2). Considering similarities in localization and substrate specificity between Mrp2 and the breast cancer resistance protein (Bcrp), we hypothesize that Bcrp may also play a role in the proximal tubular secretion of mercuric species. In order to test this hypothesis, the uptake of Hg{sup 2+} was examined initially using inside-out membrane vesicles containing Bcrp. The results of these studies suggest that Bcrp may be capable of transporting certain conjugates of Hg{sup 2+}. To further characterize the role of Bcrp in the handling of mercuric ions and in the induction of Hg{sup 2+}-induced nephropathy, Sprague–Dawley and Bcrp knockout (bcrp{sup −/−}) rats were exposed intravenously to a non-nephrotoxic (0.5 μmol·kg{sup −1}), a moderately nephrotoxic (1.5 μmol·kg{sup −1}) or a significantly nephrotoxic (2.0 μmol·kg{sup −1}) dose of HgCl{sub 2}. In general, the accumulation of Hg{sup 2+} was greater in organs of bcrp{sup −/−} rats than in Sprague–Dawley rats, suggesting that Bcrp may play a role in the export of Hg{sup 2+} from target cells. Within the kidney, cellular injury and necrosis was more severe in bcrp{sup −/−} rats than in controls. The pattern of necrosis, which was localized in the inner cortex and the outer stripe of the outer medulla, was significantly different from that observed in Mrp2-deficient animals. These findings suggest that Bcrp may be involved in the cellular export of select mercuric species and that its role in this export may differ from that of Mrp2. - Highlights: • Bcrp may mediate transport of mercury out of proximal tubular cells. • Hg-induced nephropathy was more severe in Bcrp knockout rats. • Bcrp and Mrp2 may differ in their ability to transport Hg.

60 APPLIED LIFE SCIENCES↗

The importance of fuel dissociation and propargyl + allyl association for the formation of benzene in a fuel-rich 1-hexene flame

Fuel decomposition and benzene formation processes in a premixed, laminar, low-pressure, fuel-rich flame of 1-hexene (C(6)H(12), CH(2)QCH-CH(2)-CH(2)-CH(2)-CH(3)) are investigated by comparing quantitative mole fraction profiles of flame species with kinetic modeling results. The premixed flame, which is stabilized on a flat-flame burner under a reduced pressure of 30 Torr (= 40 mbar), is analyzed by flame-sampling molecular-beam time-of-flight mass spectrometry which uses photoionization by tunable vacuum-ultraviolet synchrotron radiation. The temperature profile of the flame is measured by OH laser-induced fluorescence. The model calculations include the latest rate coefficients for 1-hexene decomposition (J. H. Kiefer et al., J. Phys. Chem. A, 2009, 113, 13570) and for the propargyl (C(3)H(3)) + allyl (a-C(3)H(5)) reaction (J. A. Miller et al., J. Phys. Chem. A, 2010, 114, 4881). The predicted mole fractions as a function of distance from the burner are acceptable and often even in very good agreement with the experimentally observed profiles, thus allowing an assessment of the importance of various fuel decomposition reactions and benzene formation routes. The results clearly indicate that in contrast to the normal reactions of fuel destruction by radical attack, 1-hexene is destroyed mainly by decomposition via unimolecular dissociation forming allyl (a-C(3)H(5)) and n-propyl (n-C(3)H(7)). Minor fuel-consumption pathways include H-abstraction reactions producing various isomeric C(6)H(11) radicals with subsequent beta-scissions into C(2), C(3), and C(4) intermediates. The reaction path analysis also highlights a significant contribution through the propargyl (C(3)H(3)) + allyl (a-C(3)H(5)) reaction to the formation of benzene. In this flame, benzene is dominantly formed through H-assisted isomerization of fulvene, which itself is almost exclusively produced by the C(3)H(3) + a-C(3)H(5) reaction.

10 SYNTHETIC FUELS↗

Reactions of C{sub 2}(a {sup 3} product {sub u}) with selected saturated alkanes: A temperature dependence study

We present a temperature dependence study on the gas phase reactions of the C{sub 2}(a {sup 3} product {sub u}) radical with a selected series of saturated alkanes (C{sub 2}H{sub 6}, C{sub 3}H{sub 8}, n-C{sub 4}H{sub 10}, i-C{sub 4}H{sub 10}, and n-C{sub 6}H{sub 14}) by means of pulsed laser photolysis/laser-induced fluorescence technique. The bimolecular rate constants for these reactions were obtained between 298 and 673 K. A pronounced negative temperature effect was observed for n-C{sub 4}H{sub 10}, i-C{sub 4}H{sub 10}, and n-C{sub 6}H{sub 14} and interpreted in terms of steric hindrance of the more reactive secondary or tertiary C-H bonds by less reactive CH{sub 3} groups. Detailed analysis of our experimental results reveals quantitatively the temperature dependence of reactivities for the primary, secondary, and tertiary C-H bonds in these saturated alkanes and further lends support to a mechanism of hydrogen abstraction.

2-METHYLPROPANE↗

Development and numerical/experimental characterization of a lab-scale flat flame reactor allowing the analysis of pulverized solid fuel devolatilization and oxidation at high heating rates

This paper deals with the thorough characterization of a new experimental test bench designed to study the devolatilization and oxidation of pulverized fuel particles in a wide range of operating conditions. This lab-scale facility is composed of a fuel feeding system, the functioning of which has been optimized by computational fluid dynamics. It allows delivering a constant and time-independent mass flow rate of fuel particles which are pneumatically transported to the central injector of a hybrid McKenna burner using a carrier gas stream that can be inert or oxidant depending on the targeted application. A premixed propane/air laminar flat flame stabilized on the porous part of the burner is used to generate the hot gases insuring the heating of the central coal/carrier-gas jet with a thermal gradient similar to those found in industrial combustors (>10{sup 5} K/s). In the present work, results issued from numerical simulations performed a priori to characterize the velocity and temperature fields in the reaction chamber have been analyzed and confronted with experimental measurements carried out by coupling particle image velocimetry, thermocouple and two-color pyrometry measurements so as to validate the order of magnitude of the heating rate delivered by such a new test bench. Finally, the main features of the flat flame reactor we developed have been discussed with respect to those of another laboratory-scale system designed to study coal devolatilization at a high heating rate.

42 ENGINEERING↗

CRITICAL REVIEW OF N, N{sup +}, N{sup +} {sub 2}, N{sup ++}, And N{sup ++} {sub 2} MAIN PRODUCTION PROCESSES AND REACTIONS OF RELEVANCE TO TITAN'S ATMOSPHERE

This paper is a detailed critical review of the production processes and reactions of N, N{sup +}, N{sup +} {sub 2}, N{sup ++}, and N{sup ++} {sub 2} of relevance to Titan's atmosphere. The review includes neutral, ion-molecule, and recombination reactions. The review covers all possible active nitrogen species under Titan's atmospheric conditions, specifically N{sub 2} (A {sup 3}{Sigma}{sup +} {sub u}), N ({sup 4} S), N ({sup 2} D), N ({sup 2} P), N{sup +} {sub 2}, N{sup +} ({sup 3} P), N{sup +} ({sup 1} D), N{sup ++} {sub 2}, and N{sup ++} species, and includes a critical survey of the reactions of N, N{sup +}, N{sup +} {sub 2}, N{sup ++}, and N{sup ++} {sub 2} with N{sub 2}, H{sub 2}, D{sub 2}, CH{sub 4}, C{sub 2}H{sub 2}, C{sub 2}H{sub 4}, C{sub 2}H{sub 6}, C{sub 3}H{sub 8} and the deuterated hydrocarbon analogs, as well as the recombination reactions of N{sup +} {sub 2}, N{sup +}, N{sup ++} {sub 2}, and N{sup ++}. Production processes, lifetimes, and quenching by collisions with N{sub 2} of all reactant species are reviewed. The N ({sup 4} S) state is reactive with radicals and its reactions with CH{sub 2}, CH{sub 3}, C{sub 2}H{sub 3}, and C{sub 2}H{sub 5} are reviewed. Metastable states N{sub 2} (A {sup 3}{Sigma}{sup +} {sub u}), N ({sup 2} D), and N ({sup 2} P) are either reactive or quenched by collisions with the target molecules reviewed. The reactions of N{sup +} ({sup 1} D) have similar rate constants as N{sup +} ({sup 3} P), but the product branching ratios differ significantly. Temperature effects and the role of the kinetic energy content of reactants are investigated. In all cases, experimental uncertainties of laboratory data are reported or estimated. Recommended values with uncertainties, or estimated values when no data are available, are given for rate constants and product branching ratios at 300 K and at the atmospheric temperature range of Titan (150-200 K for neutral reactions and 150 K for ion reactions).

79 ASTRONOMY AND ASTROPHYSICS↗