Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHOTOELECTRICITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Aerosol ionizer

A system and method comprising an ion production chamber having an ultra-violet light source disposed towards said chamber, a coated quartz plate between the chamber and the UV source whose coating absorbs incident UV light and ejects electrons into the chamber through the photoelectric effect, a harvest gas disposed to flow through the chamber from an inlet to an outlet, and a jet operable to introduce a sample into the harvest gas flow. In some embodiments the system includes using helium as the harvest gas. Certain embodiments include introducing a sample perpendicular to the harvest gas flow and using multiple sample introduction jets to increase mixing efficiency. In some embodiments the harvest gas and particle sample jet are one and the same. The charge sample may be coupled to a MEMS-based electrometer.

36 MATERIALS SCIENCE↗

Aerosol ionizer

A system and method comprising an ion production chamber having an ultra-violet light source disposed towards said chamber, a coated quartz plate between the chamber and the UV source whose coating absorbs incident UV light and ejects electrons into the chamber through the photoelectric effect, a harvest gas disposed to flow through the chamber from an inlet to an outlet, and a jet operable to introduce a sample into the harvest gas flow. In some embodiments the system includes using helium as the harvest gas. Certain embodiments include introducing a sample perpendicular to the harvest gas flow and using multiple sample introduction jets to increase mixing efficiency. In some embodiments the harvest gas and particle sample jet are one and the same. The charge sample may be coupled to a MEMS-based electrometer.

Brechtel, Fredrick J.↗

Ultraviolet sensing apparatus with mirror amplification

Systems, methods, and devices of the various embodiments may enable the detection and localization of power line corona discharges and/or electrical arcs by an unmanned aerial vehicle (UAV) including an ultraviolet (UV) sensor and a reflective parabolic dish. In various embodiments, the UV sensor may use the photoelectric effect to sense narrow-band UV photons in a Geiger-Mueller tube and circuit configuration. In various embodiments, the reflective parabolic dish may be fixed relative to the UV sensor and include a reflective concave surface. The reflective concave surface may be configured to reflect narrow-band UV photons toward the UV sensor.

Moore, Andrew J.↗

Generation and enhancement of surface acoustic waves on a highly doped p-type III-V semiconductor substrate

A device employing the generation and enhancement of surface acoustic waves on a highly doped p-type III-V semiconductor substrate (e.g., GaAs, GaSb, InAs, or InGaAs). The device includes two SiO 2 /ZnO islands, each including a SiO 2 buffer layer deposited on the doped p-type III-V semiconductor substrate and a ZnO layer deposited on the SiO 2 buffer layer. An input interdigital transducers (IDT) and an output IDT are each patterned on one of the SiO 2 /ZnO islands. The IDTs generates surface acoustic waves along an exposed surface of the highly doped p-type III-V semiconductor substrate. The surface acoustic waves improve the photoelectric and photovoltaic properties of the device. The device is manufactured using a disclosed technique for propagating strong surface acoustic waves on weak piezoelectric materials. Also disclosed is a photodetector developed using that technique.

Dong, Boqun↗

Inorganic ternary halide semiconductors for hard radiation detection

Methods and devices for detecting incident radiation, such as incident X-rays, gamma-rays, and/or alpha particle radiation are provided. The methods and devices use high purity, high quality single-crystals of inorganic semiconductor compounds, including solid solutions, having the formula AB2X5, where A represents Tl or In, B represents Sn or Pb, and X represents Br or I, as photoelectric materials.

Kanatzidis, Mercouri G.↗

A two-fold interpenetrating 3D metal-organic framework material constructed from helical chains linked via 4,4'-H{sub 2}bpz fragments

A 3-connected dia-f-type metal-organic framework compound {l_brace}[Ag(L){sub 3/2}H{sub 2}PO{sub 4}]{r_brace}{sub n} (1) has been synthesized by self-assembly of 4,4'-H{sub 2}bpz (L=4,4'-H{sub 2}bpz=3,3',5,5'-tetramethyl-4,4'-bipyrazole) and Ag{sub 4}P{sub 2}O{sub 7} under hydrothermal conditions. It crystallizes in the tetragonal space group I4{sub 1}/acd with a=21.406(4) A, b=21.406(4) A, c=36.298(8) A, Z=32. X-ray single-crystal diffraction reveals that 1 has a three-dimensional framework with an unprecedented alternate left- and right-handed helices structure, featuring a non-uniform two-fold interpenetrated (4.14{sup 2}) net. Photoluminescent investigation reveals that the title compound displays interesting emissions in a wide region, which shows that the title compound may be a good potential candidate as a photoelectric material. - Graphical abstract: A 3-connected dia-f-type metal-organic framework compound [Ag(4,4'-bpz){sub 3/2}H{sub 2}PO{sub 4}] shows unprecedented alternating left- and right-handed helices structure, featuring a non-uniform two-fold interpenetrated (4.14{sup 2}) net.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evidence of Radiosensitizing Effects of GdPO{sub 4} Nanostructures

Developing new methods to improve the outcome of cancer treatment has been one of the main research areas in medicine. Many approaches that allow for tumor targeting and thus reduction of side effects are currently under investigation. Among those, the combination of radiation therapy with certain chemotherapeutic agents has shown significant advances in cancer treatment. Another option is the use of radiosensitizers along with radiation therapy. Radiosensitizers are materials intended to enhance the radiation dose received in the tumor while maintaining the damage to the normal tissue to a minimum. Hence, the development of radiosensitizers has been of interest in recent years in order to improve the survival rate and the quality of life of the patient while reducing the cost of treatment. In this area, nanoparticles (NPs) have been widely explored as radiosensitizers due to the fact that tumor targeting can be achieved and the concentration of NPs on tumor environments can be greatly enhanced through the modification of NPs' surface by addition of agents such as antibodies. More importantly, the chemical composition of the NPs can be adjusted based on the application of interest. In this context, NPs that contain heavy elements have great potential as radiosensitizers due to their mechanisms of interaction with X-rays. For instance, gold NPs have been recognized as radiosensitizers due to their large photoelectric absorption coefficient. Furthermore, lanthanide based NPs have also shown characteristics as radiosensitizers. Among the various lanthanide containing NPs, gadolinium-based nanomaterials (NMs) have shown great potential for multiple applications in medicine such as contrast agents for magnetic resonance imaging (MRI). Additionally, the combination of gadolinium-based NPs and irradiation has evidenced a significant dose enhancement in in-vivo testing. Moreover, gadolinium-based ultra-small rigid platforms (USRPs) have shown theranostic properties for multimodal detection of lung cancers and radiosensitization effects. Among the various Gd based NPs, GdPO{sub 4} NMs are of increasing interest due to the multiple functions and applications that they may have. To illustrate, GdPO{sub 4} NPs have evidenced relaxitivities that are comparable to the contrast agents commonly used in MRI. Moreover, these NPs can be doped with different lanthanides ions allowing for the implementation of MRI and cellular luminescence for diagnostic purposes. Furthermore, gold-coated gadolinium-lanthanum phosphate NPs have evidenced their ability to encapsulate alpha-emitting radioisotopes of radiotherapeutic interest. This allows for targeted internal radiotherapy by functionalizing the NPs with specific molecules Moreover, low toxicity has been observed on dextran coated GdPO{sub 4} NPs regardless of the potential toxicity of free Gd{sup 3+}. Despite the various applications of GdPO{sub 4}, its response and interaction with X-ray evaluating their potential as radiosensitizers has not been explored. In this work, the radiosensitization of GdPO{sub 4} NMs is evidenced through the decomposition of a dye, methylene blue (MB), after X-ray radiation in the presence of NMs. GdPO{sub 4} was synthesized at moderate temperature following a hydrothermal method based on the precipitation reaction of a salt precursor and a surfactant. The crystalline structure and morphology of these NMs were characterized using Xray diffraction (XRD) and transmission electron microscopy (TEM). Crystalline GdPO{sub 4} was obtained following the hydrothermal synthesis. Besides, it was observed that the addition of GdPO{sub 4} to the MB solution enhances the decomposition of this dye under X-ray radiation. Therefore, GdPO{sub 4} NMs prove to be promising as radiosensitizers in radiation therapy. Nevertheless, the effect of GdPO{sub 4} on MB decomposition under X-ray radiation requires further study to evaluate the effect of the morphology and concentration of GdPO{sub 4} and the dose effect. (authors)

36 MATERIALS SCIENCE↗

Improvements in Electron-Photon-Relaxation Data for MCNP6

The Los Alamos Monte Carlo transport code MCNP6 has recently benefitted from significant work to improve the photon-electron transport and atomic-relaxation capabilities of the code. The improvements include extension of existing photon data to lower energies than previously supported; addition of new data such as subshell-specific photoelectric cross sections; completion of the incoherent and coherent form factor data to cover all scattering angles at all supported energies; new data for electron interactions including Bremsstrahlung, elastic scattering, subshell-specific electroionization, and atomic excitation; a much more detailed representation for atomic relaxation; and an entirely new (to MCNP) approach to electron transport: the single-event method. These improvements were made available with the initial production release of MCNP6 along with an extended electron, photon, and relaxation data file eprdata12 to support the new capabilities. More recently new data have become available and have now been incorporated into MCNP6, correcting a few issues with the previous work, and adding new sets of cross sections that were not included in eprdata12. The purpose of this paper is to introduce these newer changes and enhancements, which will be included with the next public release of the MCNP6 code system. The database that supports these developments relies on an evolving set of libraries originally released by D. E. Cullen and collaborators as separate data for photo-atomic interactions (EPDL), atomic relaxation (EADL), and electro-atomic interactions (EEDL). An updated version of this release was officially adopted in the ENDF/B VI.8 release of the Evaluated Nuclear Data File and it was this source that was used to produce the ACE (A Compact ENDF) format library eprdata12 for use in the initial production release of MCNP6.1 (and the subsequent interim release MCNP6.1.1). The latest improved version of this database was released by Cullen in 2014. This is the EPICS2014 collection, which includes both an ENDF-formatted file and separate EPDL, EADL, and EEDL files. In the area of photon-electron transport and atomic-relaxation, the newest enhancements to the current version of MCNP6 (scheduled for release as MCNP6.2) are primarily based on improvements and additions drawn from the EPICS2014 data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Determination of attenuation coefficients of heavyweight concretes containing colemanite by using {sup 133}Ba radioactive isotope source - Paper 140

As it is well known, colemanite is a boron ore. Boron is one of the most important underground richness of Turkey. Boron is employed as a constituent material of neutron shielding because of its high absorption of thermal neutrons. Barite ore includes BaSO{sub 4}, which is a well photon radiation absorbent. The literature about radiation attenuation in heavy concretes (including boron and barite ores) is fairly abundant. Abdo and Abdo et al. theoretically calculated and determined cross section by using XCOM computer program for photon and neutron radiations shielding. Akkurt et al. measured radiation transmission of heavy concretes including normal and barite aggregates for different γ-ray energies and calculated linear attenuation coefficients. Bashter et al. studied heavy concretes including hematite-serpentine, ilmenite-limonite as control absorber in nuclear reactors γ-rays and neutron particles shielding. Bashter and Bashter et al. studied heavy concretes including hematite-serpentine, ilmenite-limonite, basalt-magnetite, ilmenite, basalt, steel and magnetite for only photon radiation shielding and calculated linear and mass attenuation coefficients from 10 keV to 1 GeV. Dealmeid et al. studied radiation transmission and angular distribution for 25 MV X-rays by using LINAC. Demir and Keles measured radiation transmission of concrete including boron waste for 59.54 and 80.99 keV γ-rays. Kaplan reported about many heavy concretes studies in his book. Kitis et al. studied heavy concretes including barite aggregates for cyclotron shielding. Mollah et al. determined concretes including ilmenite and magnetite aggregates for neutron shielding by using {sup 252}Cf radioactive source and BF{sub 3} neutron detector. Yarar and Bayuelken studied concretes including colemanite aggregates for neutron shielding. In this paper, we have measured radiation transmission of thirteen different heavy concretes produced by using barite, colemanite and normal aggregates for 276, 303, 356 and 383 keV γ-ray energies of {sup 133}Ba radioactive isotope by using CdTe semiconductor detector and calculated linear and mass attenuation coefficients. Results were compared to X-ray mass attenuation coefficient values of NIST. The attenuation of γ-ray photons is governed primarily by the atomic number and density of the concrete as a shielding material. Photon attenuation depends on pair production, photoelectric effect and Compton scattering. In this study, linear attenuation coefficients (μ) decrease with the increasing the photon energy for these concretes. Heavy elements there is a fairly sharp minimum in the absorption cross section at about this energy region. It is indicated that attenuation coefficient is useful parameter for radiation shielding. As known, the linear attenuation coefficients of the concretes used in this study at these γ-ray energies are not available in the literature by using CdTe semiconductor detectors. The data shows the effects of including boron-rich colemanite or barium-rich barite in addition to normal aggregate in the concrete mixtures. As would be expected, the barite is desirable for photon attenuation, while the colemanite is desirable for neutron attenuation. The concretes including barite and colemanite would be preferred as materials for building construction of radiation oncology departments, radiology departments, nuclear reactors and radiation research laboratories against photon and neutron particle radiations. But other aggregate properties of colemanite such as abrasion resistance and freeze-thaw durability are also found to be important for concrete but they cannot be quantified at this study. (authors)

36 MATERIALS SCIENCE↗

Extreme Radiation Hardness and Space Qualification of AlGaN Optoelectronic Devices

Unprecedented radiation hardness and environment robustness are required in the new generation of high energy density physics (HEDP) experiments and deep space exploration. National Ignition Facility (NIF) break-even shots will have a neutron yield of 1015 or higher. The Europa Jupiter System Mission (EJSM) mission instruments will be irradiated with a total fluence of 1012 protons/cm2 during the space journey. In addition, large temperature variations and mechanical shocks are expected in these applications under extreme conditions. Hefty radiation and thermal shields are required for Si and GaAs based electronics and optoelectronics devices. However, for direct illumination and imaging applications, shielding is not a viable option. It is an urgent task to search for new semiconductor technologies and to develop radiation hard and environmentally robust optoelectronic devices. We will report on our latest systematic experimental studies on radiation hardness and space qualifications of AlGaN optoelectronic devices: Deep UV Light Emitting Diodes (DUV LEDs) and solarblind UV Photodiodes (PDs). For custom designed AlGaN DUV LEDs with a central emission wavelength of 255 nm, we have demonstrated its extreme radiation hardness up to 2x1012 protons/cm2 with 63.9 MeV proton beams. We have demonstrated an operation lifetime of over 26,000 hours in a nitrogen rich environment, and 23,000 hours of operation in vacuum without significant power drop and spectral shift. The DUV LEDs with multiple packaging styles have passed stringent space qualifications with 14 g random vibrations, and 21 cycles of 100K temperature cycles. The driving voltage, current, emission spectra and optical power (V-I-P) operation characteristics exhibited no significant changes after the space environmental tests. The DUV LEDs will be used for photoelectric charge management in space flights. For custom designed AlGaN UV photodiodes with a central response wavelength of 255 nm, we have demonstrated its extreme radiation hardness using a 65 MeV proton beam line. The solar-blind AlGaN photodiodes retained ~50% responsivity up to 3x1012 protons/cm2 fluence. The Stanford-NSTec-SETI team will continue to develop radiation hard optoelectronic devices for applications under extreme conditions.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Electronic band structures and photovoltaic properties of MWO{sub 4} (M=Zn, Mg, Ca, Sr) compounds

Divalent metal tungstates, MWO{sub 4}, with wolframite (M=Zn and Mg) and scheelite (M=Ca and Sr) structures were prepared using a conventional solid state reaction method. Their electronic band structures were investigated by a combination of electronic band structure calculations and electrochemical measurements. From these investigations, it was found that the band structures (i.e. band positions and band gaps) of the divalent metal tungstates were significantly influenced by their crystal structural environments, such as the W-O bond length. Their photovoltaic properties were evaluated by applying to the working electrodes for dye-sensitized solar cells. The dye-sensitized solar cells employing the wolframite-structured metal tungstates (ZnWO{sub 4} and MgWO{sub 4}) exhibited better performance than those using the scheelite-structured metal tungstates (CaWO{sub 4} and SrWO{sub 4}), which was attributed to their enhanced electron transfer resulting from their appropriate band positions. - Graphical abstract: The electronic band structures of divalent metal tungstates are described from the combination of experimental results and theoretical calculations, and their electronic structure-dependent photovoltaic performances are also studied. Highlights: > MWO{sub 4} compounds with wolframite (M=Zn and Mg) and scheelite structure (M=Ca and Sr) were prepared. > Their electronic band structures were investigated by the calculations and the measurements. > Their photovoltaic properties were determined by the crystal and electronic structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optical description of solid-state dye-sensitized solar cells. I. Measurement of layer optical properties

The efficiency of a photovoltaic device is limited by the portion of solar energy that can be captured. We discuss how to measure the optical properties of the various layers in solid-state dye-sensitized solar cells (SDSC). We use spectroscopic ellipsometry to determine the complex refractive index of each of the various layers in a SDSC. Each of the ellipsometry fits is used to calculate a transmission spectrum that is compared to a measured transmission spectrum. The complexities of pore filling on the fitting of the ellipsometric data are discussed. Scanning electron microscopy and energy dispersive x-ray spectroscopy is shown to be an effective method for determining pore filling in SDSC layers. Accurate effective medium optical constants for each layer are presented and the material limits under which these optical constants can be used are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Energy losing rate and open-circuit voltage analysis of organic solar cells based on detailed photocurrent simulation

The J-V characteristics and photovoltaic response of indium tin oxide/pentacene (d nm)/C{sub 60} (40 nm)/BCP (10 nm)/Ag (100 nm) devices have been systematically analyzed. By fitting the J-V characteristics of the fabricated devices, photocurrent densities J{sub ph} were obtained. Meanwhile, we proposed a modified optical transfer matrix theory to satisfy the reasonable trend between P{sub 0}R{sub 0} and film thickness of pentacene layers. Then, we revealed that an accurate rate of energy loss can be defined as E{sub loss}=1-betaJ{sub e}/P{sub 0}R{sub 0}. Also, the relationship between open-circuit voltage V{sub OC}, compensation voltage V{sub 0} and initial polaron-pair bounding energy E{sub B} was determined based on the detailed study and simulation of device photocurrent.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

X-ray absorption spectroscopy of biomimetic dye molecules for solar cells

Dye-sensitized solar cells are potentially inexpensive alternatives to traditional semiconductor solar cells. In order to optimize dyes for solar cells we systematically investigate the electronic structure of a variety of porphyrins and phthalocyanines. As a biological model system we use the heme group in cytochrome c which plays a role in biological charge transfer processes. X-ray absorption spectroscopy of the N 1s and C 1s edges reveals the unoccupied molecular orbitals and the orientation of the molecules in thin films. The transition metal 2p edges reflect the oxidation state of the central metal atom, its spin state, and the ligand field of the surrounding N atoms. The latter allows tuning of the energy position of the lowest unoccupied orbital by several tenths of an eV by tailoring the molecules and their deposition. Fe and Mn containing phthalocyanines oxidize easily from +2 to +3 in air and require vacuum deposition for obtaining a reproducible oxidation state. Chlorinated porphyrins, on the other hand, are reduced from +3 to +2 during vacuum deposition at elevated temperatures. These findings stress the importance of controlled thin film deposition for obtaining photovoltaic devices with an optimum match between the energy levels of the dye and those of the donor and acceptor electrodes, together with a molecular orientation for optimal overlap between the {pi} orbitals in the direction of the carrier transport.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Positioning effects on quantum dot solar cells grown by molecular beam epitaxy

We report current-voltage and spectral response characteristics of high density InAs/GaAs quantum dot (QD) solar cells with different positions where dots are located. The short circuit current density (J{sub sc}), open circuit voltage (V{sub oc}), and external quantum efficiency of these cells under air mass 1.5 are presented and compared with a GaAs reference cell. An extended photoresponse in contrast to the GaAs reference cell was confirmed for all these cells. The effect of inserting QD layers into emitter and base region on device performance is shown. The J{sub sc} is reduced, while the V{sub oc} is maintained. The cell with QDs located toward the base side shows better performance, confirmed by both current-voltage and spectral response measurements.

36 MATERIALS SCIENCE↗

Photomultiplier Tubes: Calibration and Neutrino Physics

Photomultiplier Tubes are devices designed to amplify very small light signals, on the order of single photons, to levels that are detectable by conventional electronics. Such a high level of amplification, however, comes with a quite a few potential problems, as the relationship between a light signal in and the current out- the response of the system- can be difficult to determine, meaning that photomultiplier tubes' use in scientific research requires a great deal of sensitive calibration. Once calibrated, the photomultiplier tube is a tool that can be used on a number of interesting problems, including the field of neutrino physics. This work deals with the use of photomultiplier tubes' use in the upcoming Double Chooz experiment to determine the mixing angle theta{sub 13}, between different neutrino mass eigenstates. Calibration of the tubes requires measurement of the charge characteristics, most notably, the gain, pedestal, and the dark rate of a tube. Moreover, for all modern tubes, there is an additional feature which can be used to calibrate the system, the single photo electron peak, which describes the response of the tube to a single photon. Some theories predict higher order effects, in addition to the single photoelectron peak, including things like incomplete multiplication of a single photon electron, features which are theoretically able to be determined by a detailed examination of the single photoelectron peak. This paper goes through the methods of calibrating a phototubes both with and without a single photoelectron peak, and is unable to determine conclusively whether or not partial multiplication is able to explain certain features of photomultiplier tubes with a single photoelectron peak.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Investigations of the polymer alignment, the nonradiative resonant energy transfer, and the photovoltaic response of poly(3-hexylthiophene)/TiO{sub 2} hybrid solar cells

We report the effects of annealing on the performance of hybrid photovoltaic (PV) cells containing poly(3-hexylthiophene) (P3HT) coated onto TiO{sub 2}/Sn doped In{sub 2}O{sub 3} (ITO) and ITO substrates. In the optimized device, which exhibits a higher efficiency, the backbone axes of the P3HT chains were found to lie within the substrate plane, their conjugated planes are slightly tilted, and their side chains are substantially tilted. The carboxylate group is attached via bidentate or bridging coordination to the TiO{sub 2} surface and enables photoinduced charge transfer between TiO{sub 2} and P3HT. The observed large quenching (with excitation at 488 nm) and enhanced emission (with excitation at 325 nm) indicates that efficient Foerster resonance energy transfer occurs between TiO{sub 2} and P3HT. Thus, the main influences on the high efficiency of the hybrid PV cells are the photon-mediated electronic transition and the photoinduced charge transfer.

36 MATERIALS SCIENCE↗

Photovoltaic characteristics of Pd doped amorphous carbon film/SiO{sub 2}/Si

The Pd doped amorphous carbon (a-C:Pd) films were deposited on n-Si substrates with or without a native SiO{sub 2} layer using magnetron sputtering. The photovoltaic characteristics of the a-C:Pd/SiO{sub 2}/Si and a-C:Pd/Si junctions were studied. It is found that under light illumination of 15 mW/cm{sup 2} at room temperature, the a-C:Pd/SiO{sub 2}/Si solar cell fabricated at 350 deg. C has a high power conversion efficiency of 4.7%, which is much better than the a-C/Si junctions reported before. The enhanced conversion efficiency is ascribed to the Pd doping and the increase in sp{sup 2}-bonded carbon clusters in the carbon film caused by the high temperature deposition.

36 MATERIALS SCIENCE↗