Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHOSPHIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Optical properties of InGaAs/InGaAlAs quantum wells for the 1520–1580 nm spectral range

The optical properties of elastically strained semiconductor heterostructures with InGaAs/InGaAlAs quantum wells (QWs), intended for use in the formation of the active region of lasers emitting in the spectral range 1520–1580 nm, are studied. Active regions with varied lattice mismatch between the InGaAs QWs and the InP substrate are fabricated by molecular beam epitaxy. The maximum lattice mismatch for the InGaAs QWs is +2%. The optical properties of the elastically strained InGaAlAs/InGaAs/InP heterostructures are studied by the photoluminescence method in the temperature range from 20 to 140°C at various power densities of the excitation laser. Investigation of the optical properties of InGaAlAs/InGaAs/InP experimental samples confirms the feasibility of using the developed elastically strained heterostructures for the fabrication of active regions for laser diodes with high temperature stability.

36 MATERIALS SCIENCE↗

On the problem of internal optical loss and current leakage in laser heterostructures based on AlGaInAs/InP solid solutions

Semiconductor lasers based on MOCVD-grown AlGaInAs/InP separate-confinement heterostructures are studied. It is shown that raising only the energy-gap width of AlGaInAs-waveguides without the introduction of additional barriers results in more pronounced current leakage into the cladding layers. It is found that the introduction of additional barrier layers at the waveguide–cladding-layer interface blocks current leakage into the cladding layers, but results in an increase in the internal optical loss with increasing pump current. It is experimentally demonstrated that the introduction of blocking layers makes it possible to obtain maximum values of the internal quantum efficiency of stimulated emission (92%) and continuouswave output optical power (3.2 W) in semiconductor lasers in the eye-safe wavelength range (1400–1600 nm).

36 MATERIALS SCIENCE↗

Effect of active-region “volume” on the radiative properties of laser heterostructures with radiation output through the substrate

The radiative properties of InGaAs/GaAs/InGaP laser structures with radiation output through the substrate depending on the number of quantum wells in the active region and laser diodes on their basis are investigated. It is established that the presence of six–eight quantum wells in the active region is optimum from the viewpoint of observable values of the threshold current and the output optical power of lasers.

36 MATERIALS SCIENCE↗

Application of B{sub 12}N{sub 12} and B{sub 12}P{sub 12} as two fullerene-like semiconductors for adsorption of halomethane: Density functional theory study

We examined and discussed the interaction of two halomethanes (mono-chloromethane (MCM), and mono-fluoromethane (MFM)) with B{sub 12}N{sub 12} and B{sub 12}P{sub 12} fullerene-like nanocages as semiconductor based on density functional theory (DFT). We calculated adsorption energies and followed the changes in the electronic structure of semiconductors upon adsorption of MCM and MFM. We found that the adsorption on the B{sub 12}N{sub 12} nano-cluster is energetically more favorable compared to B{sub 12}P{sub 12} nano-cluster. Also for both systems we found higher values of adsorption energy for MFM than for MCM. We found that upon adsorption of above-mentioned species on these two fullerene-like semiconductors, the HOMO–LUMO distributions and also the gap energy for each system did not change significantly, which correspond to the physisorption process. As a result, B{sub 12}N{sub 12} is a more appropriate nano-cluster to be used as a selective sensor for halomethanes, especially for MFM.

36 MATERIALS SCIENCE↗

Study of the structural and optical properties of GaP(N) layers synthesized by molecular-beam epitaxy on Si(100) 4° substrates

The structural and optical properties of GaP and GaPN layers synthesized by molecular-beam epitaxy on Si(100) substrates misoriented by 4° are studied. The possibility of producing GaP buffer layers that exhibit a high degree of heterointerface planarity and an outcropping dislocation density of no higher than ~2 × 10{sup 8} cm{sup –2} is shown. Emission from the Si/GaP/GaPN structure in the spectral range of 630–640 nm at room temperature is observed. Annealing during growth of the Si/GaP/GaPN structure makes it possible to enhance the room-temperature photoluminescence intensity by a factor of 2.6, with no shift of the maximum of the emission line.

36 MATERIALS SCIENCE↗

Electroluminescence of InAs/InAs(Sb)/InAsSbP LED heterostructures in the temperature range 4.2–300 K

The electroluminescence of InAs/InAsSbP and InAsSb/InAsSbP LED heterostructures grown on InAs substrates is studied in the temperature range T = 4.2–300 K. At low temperatures (T = 4.2–100 K), stimulated emission is observed for the InAs/InAsSbP and InAsSb/InAsSbP heterostructures with an optical cavity formed normal to the growth plane at wavelengths of, respectively, 3.03 and 3.55 μm. The emission becomes spontaneous at T > 70 K due to the resonant “switch-on” of the CHHS Auger recombination process in which the energy of a recombining electron–hole pair is transferred to a hole, with hole transition to the spin–orbit-split band. It remains spontaneous up to room temperature because of the influence exerted by other Auger processes. The results obtained show that InAs/InAs(Sb)/InAsSbP structures are promising for the fabrication of vertically emitting mid-IR lasers.

36 MATERIALS SCIENCE↗

Spatial redistribution of radiation in flip-chip photodiodes based on InAsSbP/InAs double heterostructures

The spatial distribution of equilibrium and nonequilibrium (including luminescent) IR (infrared) radiation in flip-chip photodiodes based on InAsSbP/InAs double heterostructures (λ{sub max} = 3.4 μm) is measured and analyzed; the structural features of the photodiodes, including the reflective properties of the ohmic contacts, are taken into account. Optical area enhancement due to multiple internal reflection in photodiodes with different geometric characteristics is estimated.

36 MATERIALS SCIENCE↗

Terahertz-radiation generation in low-temperature InGaAs epitaxial films on (100) and (411) InP substrates

The spectrum and waveforms of broadband terahertz-radiation pulses generated by low-temperature In{sub 0.53}Ga{sub 0.47}As epitaxial films under femtosecond laser pumping are investigated by terahertz time-resolved spectroscopy. The In{sub 0.53}Ga{sub 0.47}As films are fabricated by molecular-beam epitaxy at a temperature of 200°C under different arsenic pressures on (100)-oriented InP substrates and, for the first time, on (411)A InP substrates. The surface morphology of the samples is studied by atomic-force microscopy and the structural quality is established by high-resolution X-ray diffraction analysis. It is found that the amplitude of terahertz radiation from the LT-InGaAs layers on the (411)A InP substrates exceeds that from similar layers formed on the (100) InP substrates by a factor of 3–5.

36 MATERIALS SCIENCE↗

Electron properties of surface InGaAs/InAlAs quantum wells with inverted doping on InP substrates

The electron-transport and optical properties of heterostructures with a surface InGaAs/InAlAs quantum well in the cases of inverted δ doping with Si atoms (below the quantum well) and of standard δ doping (above the quantum well) are compared. It is shown that, in the case of inverted doping, the two-dimensional electron density in the quantum well is increased in comparison with the case of the standard arrangement of the doping layer at identical compositions and thicknesses of other heterostructure layers. The experimentally observed features of low-temperature electron transport (Shubnikov–de Haas oscillations, Hall effect) and the photoluminescence spectra of heterostructures are interpreted by simulating the band structure.

36 MATERIALS SCIENCE↗

On the high characteristic temperature of an InAs/GaAs/InGaAsP QD laser with an emission wavelength of ~1.5 μm on an InP substrate

We report on a study of lasers with an emission wavelength of about 1.5 μm and high temperature stability, synthesized on an InP (001) substrate. Self-organized InAs quantum dots capped with a thin GaAs layer are used as the active region of the laser. A quaternary InGaAsP solid solution with a band-gap width of 1.15 eV serves as the waveguide/matrix layer. A high characteristic temperature of the threshold current, T{sub 0} = 205 K, is reached in the temperature range 20–50°C in ridge-waveguide laser diodes. A correlation between the values of T{sub 0} and the band-gap width of the waveguide layers is found.

36 MATERIALS SCIENCE↗

Molecular-beam epitaxy of InGaAs/InAlAs/AlAs structures for heterobarrier varactors

The molecular-beam epitaxy of InGaAs/InAlAs/AlAs structures for heterobarrier varactors is studied and optimized. The choice of the substrate-holder temperature, growth rate and III/V ratio in the synthesis of individual heterostructure regions, the thickness of AlAs inserts and barrier-layer quality are critical parameters to achieve the optimal characteristics of heterobarrier varactors. The proposed triple-barrier structures of heterobarrier varactors with thin InGaAs strained layers immediately adjacent to an InAlAs/AlAs/InAlAs heterobarrier, mismatched with respect to the InP lattice constant at an AlAs insert thickness of 2.5 nm, provides a leakage current density at the level of the best values for heterobarrier varactor structures with 12 barriers and an insert thickness of 3 nm.

36 MATERIALS SCIENCE↗

Cleaved-edge photoluminescence spectroscopy of multilayer heterostructures

The capabilities of a technique based on combined photoluminescence and Raman-spectroscopy measurements upon lateral scanning across the cleaved edge of heterostructures for monitoring the strain profile and the thickness of epitaxial layers are demonstrated. The characteristics of a laser heterostructure with InGaAs/GaAsP quantum wells are investigated by this technique. It is shown that photoluminescence from different layers of the structure can be recorded separately. It is established that both the frequency of the InP-like phonon mode and the photoluminescence energy can be used to determine the composition of the In{sub x}Ga{sub 1–x}P alloy. The two methods yield close results.

36 MATERIALS SCIENCE↗

Intraband Radiation Absorption by Holes in InAsSb/AlSb and InGaAsP/InP Quantum Wells

Microscopic analysis of intraband radiation absorption by holes with their transition to the spin-split band for InAsSb/AlSb and InGaAsP/InP semiconductor quantum wells is performed in the context of the four-band Kane model. The calculation is performed for two incident-radiation polarizations: along the crystal-growth axis and in the quantum-well plane. It is demonstrated that absorption with transition to the discrete spectrum of spin-split holes has a higher intensity than absorption with transitions to the continuous spectrum. The dependences of the intraband absorption coefficient on temperature, hole density, and quantum- well width are thoroughly analyzed. It is shown that intraband radiation absorption can be the main mechanism of internal radiation losses in lasers based on quantum wells.

36 MATERIALS SCIENCE↗

Density Control of InP/GaInP Quantum Dots Grown by Metal-Organic Vapor-Phase Epitaxy

We investigated structural and emission properties of self-organized InP/GaInP quantum dots (QD) grown by metal organic chemical vapor deposition using an amount of deposited In from 7 to 2 monolayers (ML). In the uncapped samples, using atomic force microscopy (AFM), we observed lateral sizes of 100–200 nm, together with a bimodal height distribution having maxima at ∼5 and ∼15 nm, which we denoted as QDs of type A and B, respectively; and reduction of the density of the type-B dots from 4.4 to 1.6 μm{sup –2}. The reduction of the density of B-type dots were observed also using transmission electron microscopy of the capped samples. Using single dot low-temperature photoluminescence (PL) spectroscopy we demonstrated effects of Wigner localization for the electrons accumulated in these dots.

36 MATERIALS SCIENCE↗

Wigner Localization and Whispering Gallery Modes of Electrons in Quantum Dots

We used a low temperature near-field scanning optical microscopy (NSOM) to study a formation of Wigner molecules (WMs) in the emission spectra of self-organized InP/GaInP QDs having up to seven electrons. We used a Schottky diode structure for the electrostatic control of the number of the electrons (N) in QD, and we observed the emission of the charged excitons (for N < 3) and of the WMs (for N > 2) in the regime of weak Wigner localization. We show, that a contribution of whispering gallery modes (WGMs) of the electrons and rearrangement of the electrons between the WM and WGM states in the QDs, can explain the anomalous dependence of NSOM image size on the quantum confinement observed for some dots.

36 MATERIALS SCIENCE↗

Room Temperature Lasing of Multi-Stage Quantum-Cascade Lasers at 8 μm Wavelength

Room-temperature lasing at a wavelength of 8 μm in multistage quantum-cascade lasers pumped by current pulses is demonstrated. A quantum-cascade laser heterostructure based on the In{sub 0.53}Ga{sub 0.47}As/A{sub l0.48}In{sub 0.5}2As alloy heteropair, matched to an InP substrate, is grown by molecular-beam epitaxy and consists of 50 identical cascades placed in a waveguide with air as the top cladding. A threshold current density of ~5.1 kA/cm{sup 2} at a temperature of 300 K is obtained in ridge lasers with a cavity length of 1.4 mm and a ridge width of 24 μm.

36 MATERIALS SCIENCE↗

On the Impact of Barrier-Layer Doping on the Photoluminescence Efficiency of InGaAlAs/InGaAs/InP Strained-Layer Heterostructures

The photoluminescence of strained InGaAlAs/InGaAs/InP heterostructures with an active region consisting of nine In{sub 0.74}Ga{sub 0.26}As quantum wells and δ-doped In{sub 0.53}Al{sub 0.20}Ga{sub 0.27}As barrier layers grown by molecular beam epitaxy on an InP(100) substrate is investigated. Analysis of the photoluminescence spectra demonstrates that p-type doping leads to an increase in the photoluminescence efficiency at low excitation levels in comparison to a heterostructure with undoped barriers, and increasing the level of barrier doping to (1–2) × 10{sup 12} cm{sup –2} results in the suppression of nonradiative recombination.

36 MATERIALS SCIENCE↗

Stimulated Emission in the 1.3–1.5 μm Spectral Range from AlGaInAs Quantum Wells in Hybrid Light-Emitting III–V Heterostructures on Silicon Substrates

Hybrid laser structures with AlGaInAs quantum wells are grown by metalorganic vapor phase epitaxy on Ge/Si(100) “virtual” substrates using GaAs and InP buffer layers. Stimulated emission is achieved under optical pumping of the prepared samples in the range of 1.3–1.5 μm at liquid-nitrogen temperature. The stimulated-emission threshold is 30–70 kW/cm{sup 2}.

36 MATERIALS SCIENCE↗