Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “P”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Understanding the formation of a low-pressure pedestal in the presence of a strong internal transport barrier in DIII-D high β p plasmas

As a promising scenario for fusion reactors, the high poloidal-beta (β P ) scenario is characterized by a strong large radius internal transport barrier (ITB), which significantly enhances the overall confinement quality and the bootstrap current fraction for fully non-inductive operation. It is frequently observed that in the presence of a strong ITB, the pedestal height is lower and is accompanied by small edge localized modes (ELMs), which further improves the compatibility of a high performance core with an edge solution. A mechanism for the formation of the low pedestal is proposed in this paper. It is found that the strong ITB creates an off-axis bootstrap current to clamp the local safety factor q, and thus the magnetic shear in the outer core/pedestal region is increased. Gyrokinetic simulations with the CGYRO code show that the higher magnetic shear brings the experimental profiles into the range where the growth rate of drift-wave instabilities and thus transport is higher, and therefore a lower pedestal gradient is expected. Here, the combination of low pedestal and high magnetic shear further enhances the turbulent transport across the whole pedestal, consistent with power balance analysis. Such a positive feedback mechanism ultimately results in a lower pressure pedestal as observed in experiments. Under such a low pedestal, linear simulations with BOUT++ predict the growth rates of peeling–ballooning modes to be lower across the whole toroidal mode number spectra, and the nonlinear BOUT++ simulation exhibits lower saturated fluctuation intensity as well, consistent with the experimentally observed lower ELM size.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

pKPDB: a protein data bank extension database of p Ka and pI theoretical values

Abstract Summary pKa values of ionizable residues and isoelectric points of proteins provide valuable local and global insights about their structure and function. These properties can be estimated with reasonably good accuracy using Poisson–Boltzmann and Monte Carlo calculations at a considerable computational cost (from some minutes to several hours). pKPDB is a database of over 12 M theoretical pKa values calculated over 120k protein structures deposited in the Protein Data Bank. By providing precomputed pKa and pI values, users can retrieve results instantaneously for their protein(s) of interest while also saving countless hours and resources that would be spent on repeated calculations. Furthermore, there is an ever-growing imbalance between experimental pKa and pI values and the number of resolved structures. This database will complement the experimental and computational data already available and can also provide crucial information regarding buried residues that are under-represented in experimental measurements. Availability and implementation Gzipped csv files containing p Ka and isoelectric point values can be downloaded from https://pypka.org/pKPDB. To query a single PDB code please use the PypKa free server at https://pypka.org. The pKPDB source code can be found at https://github.com/mms-fcul/pKPDB. Supplementary information Supplementary data are available at Bioinformatics online.

Reis, Pedro B. P. S. (ORCID:0000000335636239)↗
DOE OSTI2025

Short-range spin freezing in the double trillium lattice spin-liquid candidate KSrFe 2 ⁢(PO 4 ) 3 revealed via 31 P NMR

A comprehensive 31 P nuclear magnetic resonance (NMR) study, combined with thermodynamic measurements and first-principles band-structure calculations, has been conducted to explore the ground state of the 𝑆=5/2 double trillium lattice antiferromagnet KSrFe 2 ⁢(PO 4 ) 3 . Our experimental results indicate that the magnetic ground state is neither a conventional three-dimensional (3D) long-range order (LRO) nor a pure gapless spin-liquid state, as conjectured previously [Boya et al., APL Mater. 10, 101103 (2022)]. Specifically, the observation of a nearly field-independent NMR linewidth below 𝑇* = (3.5 ± 0.4)⁢ K, and a significant enhancement of spin-spin relaxation rate 1/𝑇 2 below 2⁢𝑇* (where 𝑇* is the characteristic temperature identified from the magnetic susceptibility), indicate a complex magnetic ground state where spin freezing coexists with persistent dynamics. Furthermore, we argue that the lack of magnetic LRO and the persistence of strong magnetic fluctuations in KSrFe 2 ⁢(PO 4 ) 3 are unlikely to originate from intersite K/Sr disorder, rather they arise due to intrinsic magnetic frustration. In conclusion, our findings position KSrFe 2 ⁢(PO 4 ) 3 into a broader family of geometrically frustrated magnets characterized by coexisting spin freezing and pronounced antiferromagnetic fluctuations, marking it as a promising platform for investigating exotic phenomena in 3D frustrated magnets.

Exotic phases of matter↗
DOE OSTI2021

Disorder-robust $\textit{p}$-wave pairing with odd-frequency dependence in normal metal–conventional superconductor junctions [plus supplemental information]

We investigate the induced superconducting pair correlations in junctions between a conventional spin-singlet s-wave superconductor and a disordered normal metal. Decomposing the pair amplitude based on its symmetries in the time domain, we demonstrate that the odd-time, or equivalently odd-frequency, spin-singlet p-wave correlations are both significant in size and entirely robust against random nonmagnetic disorder. We find that these odd-frequency correlations can even be generated by disorder. Our results show that anisotropic odd-frequency pairing represent an important fraction of the proximity-induced correlations in disordered superconducting hybrid structures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Analysis of the 18 F g,m (d,p) 19 F reactions in the rotational model

Spectroscopic strengths for the 18 F g , m ( d , p ) F 19 reactions to members of the ground-state band in F 19 are interpreted in the rotational model. The analysis considers two different coupling schemes, namely, the strong and decoupled limits of the particle rotor model to describe the ground and isomeric states of F 18 , as well as the transitions to the ground-state band in F 19 . Our results, obtained using Nilsson amplitudes for the neutron levels 1 2 [ 220 ] , 3 2 [ 211 ] , and 5 2 [ 202 ] calculated at a deformation ε 2 = 0.32 are in agreement with the measurements and USDB shell-model calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Evaluation of experimental constraints on the 44 Ti(α,p) 47 V reaction cross section relevant for supernovae

Due to its importance as an astronomical observable in core-collapse supernovae (CCSNe), the reactions producing and destroying 44 Ti must be well constrained. Generally, statistical model calculations such as Hauser-Feshbach are employed when experimental cross sections are not available, but the variation in such adopted rates can be large. Here, data from the literature is compared with statistical model calculations of the 44 Ti(α,p) 47 V reaction cross section and used to constrain the possible reaction rate variation over the temperatures relevant to CCSNe. Suggestions for targeted future measurements are given.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Indirect determination of the astrophysical S factor for the Li 6 ( p , γ ) Be 7 reaction using the asymptotic normalization coefficient method

The 6 Li(p,γ) 7 Be cross section influences a variety of astrophysical scenarios, including big-bang and stellar nucleosynthesis. In recent years, conflicting results of direct measurements have been published, reporting contradictory low-energy trends. To shed light on the contradiction between the existing data sets, the reaction was studied using the asymptotic normalization coefficient (ANC) technique which was up-to-now never used for this reaction. To derive the ANC, the 6 Li( 3 He,d) 7 Be transfer reaction, studied at the Department of Physics and Astronomy of the University of Catania and at the John. D. Fox Superconducting Accelerator Laboratory at Florida State University, was re-analyzed, focusing on the proton transfer mechanism [the α transfer process is discussed by Kiss et al. [Phys. Lett. B 807, 135606 (2020)]. Here, the energy of the 3 He beam impinging on a 6 Li target was E lab = 3 MeV and E lab = 5 MeV. The yield of the emitted deuterons was measured with high precision by using silicon ΔE – E telescopes.

6 ≤ A ≤ 19↗
DOE OSTI2022

Ab initio calculation of the β decay from 11 Be to a 10 Be + $\textit{p}$ resonance

In this work, the exotic β -delayed proton emission is calculated in 11 Be from first principles using chiral two- and three-nucleon forces. To investigate the unexpectedly large branching ratio measured in Ayyad et al. [Phys. Rev. Lett. 123, 082501 (2019)], we calculate the proposed (1/2 + , 1/2) proton resonance in 11 B using the no-core shell model with continuum. This calculation helps to address whether this enhancement is caused by unknown dark decay modes or an unobserved proton resonance. We report a branching ratio of $b_p$ = (1.3 ± 0.5) × 10 –6 , suggesting that its unexpectedly large value is caused by an unobserved proton resonance in 11 B.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Revised decay properties of the key 93-keV resonance in the Mg 25 ( p , γ ) reaction and its influence on the MgAl cycle in astrophysical environments

The γ-decay properties of an excited state in 26 Al at 6398.3(8) keV have been reexamined using the 11 B+ 16 O fusion-evaporation reaction. This level represents a key 93.1(8)-keV resonance in the 25 Mg+p system and its relative branching to the 26 Al ground state, f 0 , has been determined to be 0.76 ± 0.03 (stat.) ± 0.10 (syst.). Furthermore, this is a significantly higher value than the most recent evaluation and implies a considerable increase in the production of cosmic γ rays from 26 Al radioactivity.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Updated analysis of the Er 170 ( p , t ) Er 168 reaction data

More than 200 states up to 4.1 MeV excitation have been populated in 168 Er with the 170 Er ( p , t ) reaction at 25 MeV incident energy. About 80 of these states, with 0 + and 2 + assignments, were reported in a previous publication [D. Bucurescu et al., Phys. Rev. C 73, 064309 (2006)]. Here, the present work considerably enriches the knowledge of this nucleus. A multistep coupled-channels analysis of the angular distributions is now presented for all the states observed in this experiment. Spin and parity values between 0 + and 7 - are newly assigned for more than 100 states. For the states already reported in the ENSDF database with J π values there is a good agreement with our values. The 168 Er nucleus remains one of the best experimentally known nuclei for states with low and medium spins below 4 MeV excitation energy, representing a challenge for future microscopic structure model calculations aiming to disentangle the contributions of different excitation degrees of freedom.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Different bonding type along each crystallographic axis: Computational study of poly($\textit{p}$-phenylene terephthalamide)

Poly($\textit{p}$-phenylene terephthalamide) (PPTA) exhibits van der Waals (vdW) bonding along its $\textit{a}$ axis, hydrogen bonding along its $\textit{b}$ axis, and covalent bonding along its $\textit{c}$ axis. In this work, we explore the structural and mechanical properties of PPTA using density functional theory with various functionals including LDA, PBE, PBE+rVV10L, SCAN, and SCAN+rVV10, compared with available experiments. The hierarchy of nonempirical semilocal functionals LDA, PBE, and SCAN (not fitted to any multicenter bonded system) includes differing amounts of intermediate-range vdW interaction. rVV10 is the long-range vdW correction. (rVV10L differs from rVV10 only in the value of a range parameter.) Among the tested functionals, SCAN shows the best performance for the lattice parameters of PPTA along the two crystal directions involving vdW or hydrogen-bond interaction. The equilibrium lattice constants obtained by SCAN and PBE+rVV10L are closest to experimental data, while SCAN+rVV10 slightly overbinds the system. We study the mechanical response of PPTA by applying strain along three lattice directions. Due to the inclusion of vdW interaction, SCAN, PBE+rVV10L, and SCAN+rVV10 all exhibit correct bonding strain-energy curves. On the contrary, PBE strongly underestimates the vdW interaction needed to resist uniaxial stretching along the $\textit{a}$ axis. The Young's modulus and yield strength of PPTA are computed and compared with previous results. The experimental values are much smaller than the computed ones, mainly due to the fact that the PPTA fiber samples used for measurements are mechanically weaker than the perfect molecular crystals considered in the simulations. Interestingly, when a compressive uniaxial stress of 25 Kbar is applied along the $\textit{b}$ axis, a structural phase transition, in which the hydrogen bonds reform along one diagonal of the $\textit{ab}$ rectangle, is predicted by SCAN.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Investigation of the electrical conduction mechanisms in P-type amorphous germanium electrical contacts for germanium detectors in searching for rare-event physics

For the first time, electrical conduction mechanisms in the disordered material system is experimentally studied for p-type amorphous germanium (a-Ge) used for high-purity Ge detector contacts. The localization length and the hopping parameters in a-Ge are determined using the surface leakage current measured from three high-purity planar Ge detectors. The temperature dependent hopping distance and hopping energy are obtained for a-Ge fabricated as the electrical contact materials for high-purity Ge planar detectors. As a result, we find that the hopping energy in a-Ge increases as temperature increases while the hopping distance in a-Ge decreases as temperature increases. The localization length of a-Ge is on the order of 2.13$^{-0.05}_{+0.07}$A° to 5.07$^{0.83}_{+2.58}$A°,depending on the density of states near the Fermi energy level within bandgap. Using these parameters, we predict that the surface leakage current from a Ge detector with a-Ge contacts can be much smaller than one yocto amp (yA) at helium temperature, suitable for rare-event physics searches.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Cape EGS: Frisco 2-P Well Stimulation Microseismic Data

This dataset contains microseismic data acquired during the Frisco 2-P well stimulation project led by Fervo Energy, conducted between June 1 and June 11, 2024, near the Utah FORGE geothermal site. The microseismic data was collected from various Utah FORGE wells: via Distributed Acoustic Sensing (DAS) fiber in 16B, and three 3-component geophones located in wells 56-32, 78B, and 32. The dataset is structured in SEGY format, where the first nine traces represent data from the geophones, and the remaining traces capture DAS data from well 16B. Each SEGY file in this dataset contains triggered microseismic events, with event initiation based on Short-Time Average over Long-Time Average (STA/LTA) detection criteria during the stimulation process. Files are grouped by time intervals and named following the structure "[WellPad][WellName][Month]_[Year]Divine_Trigger[EventNumber].sgy," indicating well pad, well name, date, and event number. Sampling parameters include a spatial sampling of approximately 2 meters for DAS channels and a temporal sampling rate of 2000 Hz, with each data record spanning 1.2 seconds. The files' coordinates are referenced to the location of the FORGE 16A-32 wellhead, positioned at UTM coordinates: Easting 334641.1891 m and Northing 4263443.693 m. The geographic coordinates for this origin are 38.50402147 latitude and -112.8963897 longitude, with an elevation of 1650.0249 meters above sea level.

15 GEOTHERMAL ENERGY↗
DOE OSTI2022

Revealing conductivity of p-type delta layer systems for novel computing applications

This project uses a quantum simulation technique to reveal the true conducting properties of novel atomic precision advanced manufacturing materials. With Moore's law approaching the limit of scaling for the CMOS technology, it is crucial to provide the best computing power and resources to National Security missions. Atomic precision advanced manufacturing-based computing systems can become the key to the design, use, and security of modern weapon systems, critical infrastructure, and communications. We will utilize the state-of-the-art computational methodology to create a predictive simulator for p-type atomic precision advanced manufacturing systems, which may also find applications in counterfeit detection and anti-tamper.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Synthesis and Morphological Characterization of Electroless-Deposited Ni-P Coatings on Diamond Abrasives

Deposition of a coating on rough surfaces faces unique challenges due to the complexity of substrate morphology. In the present research, electroless deposition of a Ni-P coating was successfully deposited on diamond particles. Microtomography was conducted to study the deposition mechanisms. It revealed that the coating coverage rate on diamond particles was affected by the synergistic action of the deposition time, substrate morphology, and hypophosphite concentration. The best coverage was achieved in a solution with 0.2 mol/L hypophosphite. Two major morphological features of the coating: nodular and smooth, were influenced by the deposition parameters, coating integrity, and substrate morphology. The failure was seen in fractured and peeled off coatings. It was due to residual stress produced by the coalescing of crystallites during the deposition. This failure mechanism explains the tendency of coating fracture at three morphological features of the substrate. This work is beneficial to semiconductor manufacturing where effective cutting in chip fabrication is essential.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Measuring the Electronic Bandgap of Carbon Nanotube Networks in Non-Ideal p-n Diodes

The measurement of the electronic bandgap and exciton binding energy in quasi-one-dimensional materials such as carbon nanotubes is challenging due to many-body effects and strong electron–electron interactions. Unlike bulk semiconductors, where the electronic bandgap is well known, the optical resonance in low-dimensional semiconductors is dominated by excitons, making their electronic bandgap more difficult to measure. In this work, we measure the electronic bandgap of networks of polymer-wrapped semiconducting single-walled carbon nanotubes (s-SWCNTs) using non-ideal p-n diodes. We show that our s-SWCNT networks have a short minority carrier lifetime due to the presence of interface trap states, making the diodes non-ideal. We use the generation and recombination leakage currents from these non-ideal diodes to measure the electronic bandgap and excitonic levels of different polymer-wrapped s-SWCNTs with varying diameters: arc discharge (~1.55 nm), (7,5) (0.83 nm), and (6,5) (0.76 nm). Our values are consistent with theoretical predictions, providing insight into the fundamental properties of networks of s-SWCNTs. The techniques outlined here demonstrate a robust strategy that can be applied to measuring the electronic bandgaps and exciton binding energies of a broad variety of nanoscale and quantum-confined semiconductors, including the most modern nanoscale transistors that rely on nanowire geometries.

36 MATERIALS SCIENCE↗