SEARCH · Engineering Papers

Results for “Optimal Control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

All sources NASA NTRS DOE OSTI

NASA NTRS1996

Design of Robust Adaptive Unbalance Response Controllers for Rotors with Magnetic Bearings

Experimental results have recently demonstrated that an adaptive open loop control strategy can be highly effective in the suppression of unbalance induced vibration on rotors supported in active magnetic bearings. This algorithm, however, relies upon a predetermined gain matrix. Typically, this matrix is determined by an optimal control formulation resulting in the choice of the pseudo-inverse of the nominal influence coefficient matrix as the gain matrix. This solution may result in problems with stability and performance robustness since the estimated influence coefficient matrix is not equal to the actual influence coefficient matrix. Recently, analysis tools have been developed to examine the robustness of this control algorithm with respect to structured uncertainty. Herein, these tools are extended to produce a design procedure for determining the adaptive law's gain matrix. The resulting control algorithm has a guaranteed convergence rate and steady state performance in spite of the uncertainty in the rotor system. Several examples are presented which demonstrate the effectiveness of this approach and its advantages over the standard optimal control formulation.

Knospe, Carl R.↗

NASA NTRS1974

Optimal and suboptimal control technique for aircraft spin recovery

An analytic investigation has been made of procedures for effecting recovery from equilibrium spin conditions for three assumed aircraft configurations. Three approaches which utilize conventional aerodynamic controls are investigated. Included are a constant control recovery mode, optimal recoveries, and a suboptimal control logic patterned after optimal recovery results. The optimal and suboptimal techniques are shown to yield a significant improvement in recovery performance over that attained by using a constant control recovery procedure.

Young, J. W.↗

NASA NTRS1979

Monitoring and decision making by people in man machine systems

The analysis of human monitoring and decision making behavior as well as its modeling are described. Classic and optimal control theoretical, monitoring models are surveyed. The relationship between attention allocation and eye movements is discussed. As an example of applications, the evaluation of predictor displays by means of the optimal control model is explained. Fault detection involving continuous signals and decision making behavior of a human operator engaged in fault diagnosis during different operation and maintenance situations are illustrated. Computer aided decision making is considered as a queueing problem. It is shown to what extent computer aids can be based on the state of human activity as measured by psychophysiological quantities. Finally, management information systems for different application areas are mentioned. The possibilities of mathematical modeling of human behavior in complex man machine systems are also critically assessed.

Johannsen, G.↗

NASA NTRS1992

Tracing the efficient curve for multi-objective control-structure optimization

A recently developed active set algorithm for tracing parameterized optima is adapted to multiobjective optimization. The algorithm traces a path of Kuhn-Tucker points using homotopy curve tracking techniques, and is based on identifying and maintaining the set of active constraints. Second order necessary optimality conditions are used to determine nonoptimal stationary points on the path. In the bi-objective optimization case the algorithm is used to trace the curve of efficient solution (Pareto optima). As an example, the algorithm is applied to the simultaneous minimization of the weight and control force of a ten-bar truss with two collocated sensors and actuators, with some interesting results.

Rakowska, J.↗

DOE OSTI2022

Integrated Optimization and Control of a Hybrid Gas Turbine/sCO 2 Power System

During phase-I, the project team led by Echogen Power Systems (EPS) had two primary objectives based on investigating the application of gas turbines with supercritical carbon dioxide (sCO 2 ) power cycles. The first objective was to improve the overall efficiency and performance of a hybrid gas turbine/sCO 2 power system through a joint optimization of the two subsystems (gas turbine and sCO 2 power cycle) using non-linear optimization techniques that simultaneously evaluate thermal performance of the combined cycle. The hybrid power system included several points of interaction, including (but not limited to) gas turbine exhaust, fuel heating, inlet chilling and turbine cooling. The second objective was to establish a baseline transient response model of the hybrid power system and a notional microgrid and begin steps to integrate the control systems of the three major elements (gas turbine, sCO 2 cycle and grid controller). The project team established a baseline performance for a combined cycle power plant using a production gas turbine and scaled sCO 2 power cycle only utilizing exhaust heat recovery. Echogen’s non-linear techno-economic optimization code was extended by adding gas turbine component models derived from a in-house developed gas turbine design code. With the two cycles coupled by the gas turbine exhaust, design parameters of both cycles were allowed to vary simultaneously to determine performance opportunity versus isolated designs. Returning to the baseline gas turbine/sCO 2 power cycle transient models: Echogen had in-house developed sCO 2 cycle transient model in GT-Suite system simulation software, and had partnered with Siemens Finspång for gas turbine transient model, and Siemens PTI group to provide micro-grid load profile as well as hybrid power cycle generated load (power and frequency) analysis. The transient model for the SGT-750 Siemens gas turbine was a “black-box” functional mock-up interface (FMI) model developed by Siemens Industrial Turbomachinery in Finspång, Sweden. The SGT-750 is a twin-shaft gas turbine that produces 40 MW electricity with an efficiency of about 40% at ISO conditions. At 100% gas turbine throttle (load), the SGT-750 has average exhaust conditions of 114.6 kg/s and 469.8°C. The transient model for sCO 2 power cycle was developed by Echogen in GT-SUITE 1D system simulation software platform. The basic CO 2 flow circuit has single-shaft turbomachinery with net 11.5 MW electrical power output at design conditions. The power turbine has a double-ended shaft with one end connected to synchronous generator through a fixed-ratio gearbox. The other end of power turbine is connected to the compressor through a continuously variable transmission. The major components of the sCO 2 power cycle modeled include air cooled condenser/cooler, CO 2 compressor, recuperator, two waste heat exchanger coils, power turbine, continuous variable transmission, gearbox and generator. Integration of SGT-750 transient model and sCO 2 power cycle transient model was done in Matlab Simulink. In the integrated model, the gas turbine and sCO 2 power cycle interacted at two points, first one being the gas turbine exhaust gas flow rate and temperature, which were inputs to sCO 2 power cycle model. The second point was the distribution of micro-grid load demand signal between the SGT-750 generator and sCO 2 cycle generator. For a given combined-cycle load demand, the gas turbine load demand was equal to the total demand minus the sCO 2 cycle power generated. In the present study the integrated model was simulated for two cases of grid load demand: (i) for a step change, both positive-step and negative-step, in grid load demand (ii) for a micro-grid load demand curve provided by Siemens PTI group. Finally, the time series plots representing load demand versus integrated system response were presented including the sCO 2 power cycle control system performance plots. The actual generated power and frequency of both the generators, gas turbine and sCO 2 power cycle, was supplied to Siemens PTI group for dynamic grid assessment, results of which are provided in appendices.

03 NATURAL GAS↗

NASA NTRS1985

Control of large antennas based on electromagnetic performance criteria

The electromagnetic (EM) performance of large flexible antennas is traditionally achieved by imposing stringent geometric restrictions on the structural distortions from a nominal optimum configuration. An approach to alleviate the stringency of the geometrical criteria of satisfactory performance is presented. The approach consists of generating a linear optimal control problem with quadratic cost functional where the cost functional is obtained from the EM characteristics of the antenna and the dynamic system constraint is given by the structural model of the antenna. It is established that the EM based optimal controller is considerably more efficient than the traditional geometrical based controllers. The same EM performance can be achieved with a much reduced control effort.

Lin, Y. H.↗

NASA NTRS1986

Nearly-grazing optimal trajectories for aeroassisted orbital transfer

In the present treatment of optimal control problems arising in the study of coplanar aeroassisted orbital transfer, the hybrid combination of propulsive parameters in space and aerodynamic maneuvers employing lift modulation in the sensible atmosphere indicates that the optimal energy-viewpoint solution is the grazing trajectory; this trajectory is characterized by favorable values of the peak heating rate and the peak dynamic pressure. Numerical solutions are obtained by means of the sequential gradient restoration algorithm for optimal control problems. It is found that nearly-grazing trajectories yielding the least-square value of the path inclination have desirable characteristics from the standpoints of energy, heating rate, and dynamic pressure.

Miele, A.↗

NASA NTRS1976

Estimation of characteristics and stochastic control of an aircraft flying in atmospheric turbulence

An adaptive control technique to improve the flying qualities of an aircraft in turbulence was investigated. The approach taken was to obtain maximum likelihood estimates of the unknown coefficients of the aircraft system and then, using these estimates along with the separation principle, to define the stochastic optimal control. The maximum likelihood estimation technique that accounted for the effects of turbulence provided good estimates of the unknown coefficients and of the turbulence. The assessment of the stochastic optimal control based on the maximum likelihood estimates showed that the desired effects were attained for the regulator problem of minimizing pitch angle and the tracking problem of requiring normal acceleration to follow the pilot input.

Iliff, K. W.↗

NASA NTRS1992

A parameter optimization approach to controller partitioning for integrated flight/propulsion control application

A parameter optimization framework is presented to solve the problem of partitioning a centralized controller into a decentralized hierarchical structure suitable for integrated flight/propulsion control implementation. The controller partitioning problem is briefly discussed and a cost function to be minimized is formulated, such that the resulting 'optimal' partitioned subsystem controllers will closely match the performance (including robustness) properties of the closed-loop system with the centralized controller while maintaining the desired controller partitioning structure. The cost function is written in terms of parameters in a state-space representation of the partitioned sub-controllers. Analytical expressions are obtained for the gradient of this cost function with respect to parameters, and an optimization algorithm is developed using modern computer-aided control design and analysis software. The capabilities of the algorithm are demonstrated by application to partitioned integrated flight/propulsion control design for a modern fighter aircraft in the short approach to landing task. The partitioning optimization is shown to lead to reduced-order subcontrollers that match the closed-loop command tracking and decoupling performance achieved by a high-order centralized controller.

Schmidt, Phillip↗

NASA NTRS1993

A parameter optimization approach to controller partitioning for integrated flight/propulsion control application

Schmidt, Phillip H.↗

DOE OSTI2023

Dancing the Quantum Waltz: Compiling Three-Qubit Gates on Four Level Architectures

Superconducting quantum devices are a leading technology for quantum computation, but they face several challenges. Gate errors, coherence errors and a lack of connectivity all contribute to low fidelity results. In particular, connectivity restrictions enforce a gate set that requires three-qubit gates to be decomposed into one- or two-qubit gates. This substantially increases the number of two-qubit gates that need to be executed. However, many quantum devices have access to higher energy levels. We can expand the qubit abstraction of |0〉 and |1〉 to a ququart which has access to the |2〉 and |3〉 state, but with shorter coherence times. This allows for two qubits to be encoded in one ququart, enabling increased virtual connectivity between physical units from two adjacent qubits to four fully connected qubits. This connectivity scheme allows us to more efficiently execute three-qubit gates natively between two physical devices.We present direct-to-pulse implementations of several three-qubit gates, synthesized via optimal control, for compilation of three-qubit gates onto a superconducting-based architecture with access to four-level devices with the first experimental demonstration of four-level ququart gates designed through optimal control. We demonstrate strategies that temporarily use higher level states to perform Toffoli gates and always use higher level states to improve fidelities for quantum circuits. We find that these methods improve expected fidelities with increases of 2x across circuit sizes using intermediate encoding, and increases of 3x for fully-encoded ququart compilation.

Litteken, Andrew↗

NASA NTRS1991

A new proof of the Jacobi necessary condition

A new proof is given for Jacobi's no-conjugate-point necessary condition. For a certain class of linear-quadratic optimal control problems it is shown that the existence of a conjugate point in the interior of the extremal implies the existence of control perturbations that lead to a reduction in cost. In a well-known way, through the concept of the accessory minimum problem, this results in a no-conjugate-point condition for general optimal control problems. Important ideas used in this work are adopted from Breakwell and Ho (1965). In contrast to earlier results, the new proof also applies if the coefficient functions of time associated with the accessory minimum problem have any finite number of discontinuities.

Seywald, Hans↗

DOE OSTI2017

The Salem Smart Power Center: An Assessment of Battery Performance and Economic Potential

This paper presents an assessment of the economic potential of a 5 MW/1.25 MWh Energy Storage System (ESS) installed at the Salem Smart Power Center (SSPC), a smart grid technology demonstration facility owned and operated by Portland General Electric (PGE) in Salem, Oregon. The ESS and the grid conditions in which it operates were modeled using Pacific Northwest National Laboratory’s Battery Storage Evaluation Tool (BSET) to explore tradeoffs between services, and to develop optimal control strategies. This assessment monetized the value derived from nine services the SSPC could provide to PGE and the customers it serves. The ESS and the grid conditions in which it operates were modeled using PNNL’s in-house optimization tool BSET to explore tradeoffs between services, and to develop optimal control strategies. The analysis resulted in a number of lessons that provide crucial insights into the practical application of ESS, including; The SSPC, which was originally conceived as a research and test facility and built with the prevailing maturity technology level, was built at a cost ($20.4 million) that exceeds current day prices ($5.4 million) for a similarly designed and built 5 MW/1.25 MWh system; In terms of economic operation, the SSPC is currently underutilized, deployed only for primary frequency response. PNNL modeling indicates that optimal operation of the ESS could generate an additional value of $2.3 million over 20 years. It should also be noted that primary frequency response is the highest benefit application but requires a response from the SSPC only 17 hours each year. While optimally engaged, the ESS would provide arbitrage and ancillary services 78 percent of the time, but those services generate only 27 percent of the total value; Participation in Western EIM represents an interesting opportunity for PGE with a potential to generate $2.1 million value in PV terms over 20 years in the 5-min real-time market; With an energy to power ratio of only 0.25, the SSPC is not well suited to engage in most energy-intensive applications such as arbitrage or ancillary services. By upsizing the storage capacity to 5 MWh and 10MWh, the additional value allows the benefits ($13.3 million and 20.3 million, respectively) to exceed the system’s revenue requirements ($11.5 and $16.4 million, respectively). For the SSPC, ROI ratios exceeded 1.0 when the energy to power ratio fell between 0.5 and 3.5, and peaked at an energy to power ratio of 2.0. This report represents the output of the first of a two-phase effort. Phase II will involve the development of enhanced control strategies to assist PGE in realizing the benefits of energy storage in real-time.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2021

TEAM Project Review, Year 2

This report summarizes our research activities within the TEAM project between December 2020 and December 2021, funded by the ASCR Advanced Research in Quantum Computing program. During the reporting period the LLNL-MSU team has made progress on several fronts. An overarching goal of the team is to provide a comprehensive suite of software tools that can be used for the Characterize-Optimize-Compute loop needed to implement and execute algorithms on quantum devices. We are concurrently developing lightweight solvers that can be used on desktop computers to find optimal control pulses and to characterize small quantum systems (consisting of a few transmons and cavities). However, desktop computers are insufficient for simulating and characterizing larger quantum systems. We have therefore also developed parallel, distributed memory, simulators and optimization solvers, both for open and closed quantum systems. These parallel solvers have, for example, been used to study quantum optimal control for pure-state preparation, utilizing 1000’s of cores on a modern high-performance computing (HPC) platform.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

NASA NTRSDate not supplied

Maximum-Likelihood Parameter Estimation for High-Contrast Wavefront Sensing & Control

Stellar coronagraphs use closed-loop focal-plane wavefront sensing and control algorithms to create high-contrast dark zones suitable for imaging exoplanets and exozodiacal dust clouds around nearby stars. At present, the deepest contrast has been achieved using model-based algorithms, which use the predicted focal-plane influence of the coronagraph's deformable mirrors to drive diffracted starlight toward zero over time in an optimal control framework. However, model-based algorithms are susceptible to model mismatch, wherein a departure of the coronagraph's true optical characteristics from the model predictions causes reduced control loop performance. Here, we report on a technique for maximum-likelihood estimation of the wavefront control Jacobian matrix and noise statistics of the coronagraph focal-plane electric field from data acquired in situ during closed-loop wavefront control operations. By empirically tuning the Jacobian and noise properties in a statistically rigorous fashion, the maximum-likelihood approach mitigates model mismatch and recovers near-optimal control loop performance.

coronagraphy↗

DOE OSTI2016

Discrete Time McKean–Vlasov Control Problem: A Dynamic Programming Approach

We consider the stochastic optimal control problem of nonlinear mean-field systems in discrete time. We reformulate the problem into a deterministic control problem with marginal distribution as controlled state variable, and prove that dynamic programming principle holds in its general form. We apply our method for solving explicitly the mean-variance portfolio selection and the multivariate linear-quadratic McKean–Vlasov control problem.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2024

Leveraging Multitime Hamilton–Jacobi PDEs for Certain Scientific Machine Learning Problems

Hamilton-Jacobi partial differential equations (HJ PDEs) have deep connections with a wide range of fields, including optimal control, differential games, and imaging sciences. By considering the time variable to be a higher dimensional quantity, HJ PDEs can be extended to the multi-time case. In this paper, we establish a novel theoretical connection between specific optimization problems arising in machine learning and the multi-time Hopf formula, which corresponds to a representation of the solution to certain multi-time HJ PDEs. Through this connection, we increase the interpretability of the training process of certain machine learning applications by showing that when we solve these learning problems, we also solve a multi-time HJ PDE and, by extension, its corresponding optimal control problem. As a first exploration of this connection, we develop the relation between the regularized linear regression problem and the Linear Quadratic Regulator (LQR). We then leverage our theoretical connection to adapt standard LQR solvers (namely, those based on the Riccati ordinary differential equations) to design new training approaches for machine learning. Lastly, we provide some numerical examples that demonstrate the versatility and possible computational advantages of our Riccati-based approach in the context of continual learning, post-training calibration, transfer learning, and sparse dynamics identification.

97 MATHEMATICS AND COMPUTING↗

NASA NTRS1972

An Optimization study on a hybrid computer

The maximum principle is applied to minimum-time optimal-control problems, and an optimization algorithm is presented which can be implemented on a hybrid computer. The state and adjoint equations are set up on ASTRAC 2, a high-speed analog computer capable of 1000 differential equation solutions per second. The optimization algorithm is implemented on a PDP-9, an 18-bit, digital computer. The optimization scheme has global and local search phases and uses a vector optimization criterion. Second and third-order bang-bang control systems are studied as examples.

Gonzalez, R. S.↗