Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “OPERATIONAL PROBLEM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Reactor Facility Operational State Classification Using Gas Effluents and Radiation Measurements

Inferring the operational state of a reactor facility, using measurements from an independent in-situ monitoring system, is critical to the assessment of its compliance to agreements. We consider the problem of inferring the on/off operational state of a facility by using gas effluents and radiation measurements collected at the reactor's off-gas ventilation stack and within its surrounding area. Effluent release concentrations of three noble gases, namely, Ar-41, Cs-138, and Xe-138, are collected inside the ventilation stack and provided every four hours. Gamma spectra is recorded every second by a radiation detector located about 100 meters offset from the stack, which is affected by weather and nearby conditions. We study classifiers based on the correlation coefficient (CC) method [1] applied to individual modalities and their combinations. We implement CC classifiers using ground truth measurements collected over 2 operational cycles of High Flux Isotope Reactor (HFIR) at Oak Ridge National Laboratory (ORNL) in year 2017.

Ramirez Aviles, Camila A.↗

GPS Global Tracking Network Operations At JPL During the 1992 IGS Experiment and Beyond

The GPS Network Operations center at JPL Provides resources for the collection, distribution and maintenance of GPS data from global network of GPS receivers. This includes the ability to remotely diagnosis receiver problems, communicate with receivers and operators of receivers, to automatically collect, process and distribute data for 14 stations in the IGS network. This amounts to 35 megabytes of raw, finished data and products daily.

GPS receiver Global Network↗

Light Curve Observations of Upper Stages in the Low Earth Orbit Environment

Active debris removal (ADR) is a potential means to remediate the orbital debris environment in low Earth orbit (LEO). Massive intact objects, including spent upper stages and retired payloads, with high collision probabilities have been suggested as potential targets for ADR. The challenges to remove such objects on a routine basis are truly monumental. A key piece of information needed for any ADR operations is the tumble motion of the targets. Rapid tumble motion (in excess of one degree per second) of a multiple-ton intact object could be a major problem for proximity and docking operations. Therefore, there is a need to characterize the general tumble motion of the potential ADR targets for future ADR planning. The NASA Orbital Debris Program Office has initiated an effort to identify the global tumble behavior of potential ADR targets in LEO. The activities include optical light curve observations, imaging radar data collection, and laboratory light curve simulations and modeling. This paper provides a preliminary summary of light curve data of more than 100 upper stages collected by two telescope facilities in Colorado and New Mexico between 2011 and 2012. Analyses of the data and implications for the tumble motions of the objects are also discussed in the paper.

Liou, J.-C.↗

A Survey of Flight Crew Experience with FANS-1 ATC Datalink

A survey was used to collect data from Boeing 747-400 pilots who fly with three international carriers about their operational experience using FANS-1 CPDLC (controller-pilot datalink communication) for oceanic communication with air traffic control (ATC). The survey provides data characterizing the operators' experiences performing all routine datalink communication tasks, with the goal of determining how well the FANS-1 CPDLC system supports task performance, the problems flight crews experience when using the system, and the possible operational consequences of those problems. Survey questions were developed from an analysis of activities performed by pilots when using FANS-1 CPDLC. Seven routine tasks were identified: (1) preflight initialization; (2) ATC facility logon; (3) monitoring ATC facility handoffs; (4) monitoring integrity of FANS- 1 CPDLC connection; (5) responding to ATC communications; (6) sending ATC requests; and (7) sending ATC position reports. A decomposition of each task described its information requirements, task timing requirements, user interface actions, company procedures and documentation, and the available cues and feedback provided by the interface. This analysis was used to determine where the system might provide poor support for task performance, and survey questions were developed to determine whether operator experience reflected problems in these areas.

Smith, Nancy↗

Robust Optimal Control of Inverter-Based Resources Under Grid-Forming Operation

In this paper, we propose and solve a robust control problem for inverter-based resources under grid-forming operation to regulate the voltage and frequency. One major challenge is to mitigate the effect of unmeasurable load current disturbance, grid and load parametric uncertainties. Moreover, strong coupling between the state variables on both the AC and DC sides, as well as between the modulating control input and the frequency impose additional challenges. To address these challenges, first, a robust control problem is solved at the high level via transformation into an equivalent, but more tractable, optimal control problem. Then, in the middle layer a voltage control law is designed on the one side, and a frequency control law on the other side. Finally, an inverter filter current controller is designed to complete the controller design. Theoretical results are derived to provide stability guarantees for the resulting closed-loop system. Specifically, we show that the inverter current injection error is dissipative, the frequency error is semi-globally asymptotically stable, and the inverter terminal voltage error is globally asymptotically stable, all with provided sufficient conditions. Here, numerical simulation experiments are used to validate the theoretical claims. Furthermore, the developed controller is compared with existing work in literature to show the efficacy of the proposed approach.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Recovering Sturm-Liouville operators from spectra on a graph with a cycle

An inverse problem of spectral analysis is studied for Sturm-Liouville differential operators on a graph with a cycle and with generalized matching conditions at the internal vertex. Theorems on the unique recovery of operators from a system of spectra are proved, and a constructive solution is obtained for this class of inverse problems. Bibliography: 26 titles.

97 MATHEMATICS AND COMPUTING↗

On the Derivation of Quasi-Newton Formulas for Optimization in Function Spaces

Newton’s method is usually preferred when solving optimization problems due to its superior convergence properties compared to gradient-based or derivative-free optimization algorithms. However, deriving and computing second-order derivatives needed by Newton’s method often is not trivial and, in some cases, not possible. In such cases quasi-Newton algorithms are a great alternative. In this paper, we provide a new derivation of well-known quasi-Newton formulas in an infinite-dimensional Hilbert space setting. Furthermore, it is known that quasi-Newton update formulas are solutions to certain variational problems over the space of symmetric matrices. In this paper, we formulate similar variational problems over the space of bounded symmetric operators in Hilbert spaces. By changing the constraints of the variational problem we obtain updates (for the Hessian and Hessian inverse) not only for the Broyden-Fletcher-Goldfarb-Shanno (BFGS) quasi-Newton method but also for Davidon–Fletcher–Powell (DFP), Symmetric Rank One (SR1), and Powell-Symmetric-Broyden (PSB). In addition, for an inverse problem governed by a partial differential equation (PDE), we derive DFP and BFGS “structured” secant formulas that explicitly use the derivative of the regularization and only approximates the second derivative of the misfit term. We show numerical results that demonstrate the desired mesh-independence property and superior performance of the resulting quasi-Newton methods.

97 MATHEMATICS AND COMPUTING↗

Simulation Modeling for Reliable Biomass Supply Chain Design Under Operational Disruptions

Lignocellulosic biomass derived fuels and chemicals are a promising and sustainable supplement for petroleum-based products. Currently, the lignocellulosic biofuel industry relies on a conventional system where feedstock is harvested, baled, stored locally, and then delivered in a low-density format to the biorefinery. However, the conventional supply chain system causes operational disruptions at the biorefinery mainly due to seasonal availability, handling problems, and quality variability in biomass feedstock. Operational disruptions decrease facility uptime, production efficiencies, and increase maintenance costs. For a low-value high-volume product where margins are very tight, system disruptions are especially problematic. In this work we evaluate an advanced system strategy in which a network of biomass processing centers (depots) are utilized for storing and preprocessing biomass into stable, dense, and uniform material to reduce feedstock supply disruptions, and facility downtime in order to boost economic returns to the bioenergy industry. A database centric discrete event supply chain simulation model was developed, and the impact of operational disruptions on supply chain cost, inventory and production levels, farm metrics and facility metrics were evaluated. Three scenarios were evaluated for a 7-year time-period: (1) bale-delivery scenario with biorefinery uptime varying from 20 to 85%; (2) pellet-delivery scenario with depot uptime varying from 20 to 85% and biorefinery uptime at 85%; and (3) pellet-delivery scenario with depot and biorefinery uptime at 85%. In scenarios 1 and 2, tonnage discarded at the field edge could be reduced by increasing uptime at facility, contracting fewer farms at the beginning and subsequently increasing contracts as facility uptime increases, or determining alternative corn stover markets. Harvest cost was the biggest contributor to the average delivered costs and inventory levels were dependent on facility uptimes. We found a cascading effect of failure propagating through the system from depot to biorefinery. Therefore, mitigating risk at a facility level is not enough and conducting a system-level reliability simulation incorporating failure dependencies among subsystems is critical.

09 BIOMASS FUELS↗

UAV Trajectory Modeling Using Neural Networks

Massive small unmanned aerial vehicles are envisioned to operate in the near future. While there are lots of research problems need to be addressed before dense operations can happen, trajectory modeling remains as one of the keys to understand and develop policies, regulations, and requirements for safe and efficient unmanned aerial vehicle operations. The fidelity requirement of a small unmanned vehicle trajectory model is high because these vehicles are sensitive to winds due to their small size and low operational altitude. Both vehicle control systems and dynamic models are needed for trajectory modeling, which makes the modeling a great challenge, especially considering the fact that manufactures are not willing to share their control systems. This work proposed to use a neural network approach for modelling small unmanned vehicle's trajectory without knowing its control system and bypassing exhaustive efforts for aerodynamic parameter identification. As a proof of concept, instead of collecting data from flight tests, this work used the trajectory data generated by a mathematical vehicle model for training and testing the neural network. The results showed great promise because the trained neural network can predict 4D trajectories accurately, and prediction errors were less than 2:0 meters in both temporal and spatial dimensions.

Neural Networks↗

Spline-based Rayleigh-Ritz methods for the approximation of the natural modes of vibration for flexible beams with tip bodies

Rayleigh-Ritz methods for the approximation of the natural modes for a class of vibration problems involving flexible beams with tip bodies using subspaces of piecewise polynomial spline functions are developed. An abstract operator theoretic formulation of the eigenvalue problem is derived and spectral properties investigated. The existing theory for spline-based Rayleigh-Ritz methods applied to elliptic differential operators and the approximation properties of interpolatory splines are useed to argue convergence and establish rates of convergence. An example and numerical results are discussed.

Rosen, I. G.↗

Cognitive engineering models in space systems

NASA space systems, including mission operations on the ground and in space, are complex, dynamic, predominantly automated systems in which the human operator is a supervisory controller. Models of cognitive functions in complex systems are needed to describe human performance and form the theoretical basis of operator workstation design, including displays, controls, and decision aids. Currently, there several candidate modeling methodologies. They include the Rasmussen abstraction/aggregation hierarchy and decision ladder, the goal-means network, the problem behavior graph, and the operator function model. The research conducted under the sponsorship of this grant focuses on the extension of the theoretical structure of the operator function model and its application to NASA Johnson mission operations and space station applications. The initial portion of this research consists of two parts. The first is a series of technical exchanges between NASA Johnson and Georgia Tech researchers. The purpose is to identify candidate applications for the current operator function model; prospects include mission operations and the Data Management System Testbed. The second portion will address extensions of the operator function model to tailor it to the specific needs of Johnson applications. At this point, we have accomplished two things. During a series of conversations with JSC researchers, we have defined the technical goal of the research supported by this grant to be the structural definition of the operator function model and its computer implementation, OFMspert. Both the OFM and OFMspert have matured to the point that they require infrastructure to facilitate use by researchers not involved in the evolution of the tools. The second accomplishment this year was the identification of the Payload Deployment and Retrieval System (PDRS) as a candidate system for the case study. In conjunction with government and contractor personnel in the Human-Computer Interaction Lab, the PDRS was identified as the most accessible system for the demonstration. Pursuant to this a PDRS simulation was obtained from the HCIL and an initial knowledge engineering effort was conducted to understand the operator's tasks in the PDRS application. The preliminary results of the knowledge engineering effort and an initial formulation of an operator function model (OFM) are contained in the appendices.

Mitchell, Christine M.↗

Inflight performance of the Ulysses reaction control system

The Ulysses spacecraft has been exploring the heliosphere since October 1990 in a six-year polar orbit. Despite varying operational demands, the pressure-fed monopropellant hydrazine reaction control system (RCS) has experienced few problems. The observed anomalies, having minimal operational impact, include plume impingement effects, electrical power overload effects and hydrazine gas generation effects. These anomalies are presented and discussed, with emphasis on the first observation of gas in the hydrazine propellant. The relatively low gas generation rate is attributed to: the use of high purity hydrazine; the configuration of the spin-stabilized spacecraft; the extensive use of titanium alloys; and the efficiency of the thermal control of the propellant tank which maintains a temperature of 21 C.

McGarry, Andrew↗

A Structurally-Adaptive Framework for Distributed Airborne Sensing over Real-time Collaborative Information Sharing Networks

The emergence and maturation of wireless communication technologies continue to transform the aviation industry and are enabling new solutions to challenges faced by NASA’s Advanced Air Mobility (AAM) initiative. AAM is leading towards high-density autonomous aircraft operations in areas underserved by traditional aviation, such as over densely populated urban centers. In this paper, we build on concepts from Smart Spaces - where sensing, processing, and communication are embedded in an environment, and agents are operating within the space can exploit these capabilities in real-time through collaborative information sharing networks. Building from these concepts, we propose a framework to enable a dynamic, topologically-adaptive, and distributed estimation system for man-rated aviation to address challenges faced by autonomous AAM operations. This paper presents the initial concept of operations and system design for this framework, presents a mathematical formulation for abstraction of the problem, identifies requirements and constraints for operation, and presents algorithmic constructs and mathematical formalisms to demonstrate operation. The proposed framework will be evaluated on a regional AAM flight scenario and will focus on two initial applications: (1) GPS-free navigation supporting precision approach and landing (PAL), and (2) surveillance and conformance monitoring of aircraft in vertiport airspaces. Such approaches show promise in addressing gaps in current technologies needed to enable future AAM concepts, while promising greater capabilities, performance, robustness, and safety over current aviation systems and operations.

Structurally-Adaptive↗

A Structurally-Adaptive Framework for Distributed Airborne Sensing over Real-time Collaborative Information Sharing Networks

The emergence and maturation of wireless communication technologies continue to transform the aviation industry and are enabling new solutions to challenges faced by NASA’s Advanced Air Mobility (AAM) initiative. AAM is leading towards high-density autonomous aircraft operations in areas underserved by traditional aviation, such as over densely populated urban centers. In this paper, we build on concepts from distributed sensing and smart spaces - where sensing, processing, and communication are embedded in an environment, and agents are operating within the space can exploit these capabilities in real-time through collaborative information sharing networks. Building from these concepts, we propose a framework to enable a dynamic, topologically-adaptive, and distributed estimation system for man-rated aviation to address challenges faced by autonomous AAM operations. This paper presents the initial concept of operations and system design for this framework, presents a mathematical formulation for abstraction of the problem, identifies requirements and constraints for operation, and presents algorithmic constructs to demonstrate operation. The initial framework design will focus on supporting precision navigation and independent surveillance supporting conformance monitoring of aircraft in airspace corridors and vertiport airspaces. Preliminary results from this framework shows promise in addressing gaps in current technologies needed to enable future AAM concepts, while promising greater capabilities, performance, robustness, and safety over current aviation systems and operations.

Distributed sensing↗

Learning Only on Boundaries: A Physics-Informed Neural Operator for Solving Parametric Partial Differential Equations in Complex Geometries

Recently, deep learning surrogates and neural operators have shown promise in solving partial differential equations (PDEs). However, they often require a large amount of training data and are limited to bounded domains. In this work, we present a novel physics-informed neural operator method to solve parameterized boundary value problems without labeled data. By reformulating the PDEs into boundary integral equations (BIEs), we can train the operator network solely on the boundary of the domain. This approach reduces the number of required sample points from $O(N^d)$ to $O(N^{d-1}$), where $d$ is the domain’s dimension, leading to a significant acceleration of the training process. Additionally, our method can handle unbounded problems, which are unattainable for existing physics-informed neural networks (PINNs) and neural operators. Finally, our numerical experiments show the effectiveness of parameterized complex geometries and unbounded problems.

97 MATHEMATICS AND COMPUTING↗

Structure Learning and Statistical Estimation in Distribution Networks - Part I

Traditionally power distribution networks are either not observable or only partially observable. This complicates development and implementation of new smart grid technologies, such as those related to demand response, outage detection and management, and improved load-monitoring. In this two part paper, inspired by proliferation of the metering technology, we discuss estimation problems in structurally loopy but operationally radial distribution grids from measurements, e.g. voltage data, which are either already available or can be made available with a relatively minor investment. In Part I, the objective is to learn the operational layout of the grid. Part II of this paper presents algorithms that estimate load statistics or line parameters in addition to learning the grid structure. Further, Part II discusses the problem of structure estimation for systems with incomplete measurement sets. Our newly suggested algorithms apply to a wide range of realistic scenarios. The algorithms are also computationally efficient – polynomial in time– which is proven theoretically and illustrated computationally on a number of test cases. The technique developed can be applied to detect line failures in real time as well as to understand the scope of possible adversarial attacks on the grid.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Moment method and continued fraction expansion in Floquet operator Krylov space

Recursion methods such as Krylov techniques map complex dynamics to an effective noninteracting problem in one dimension. For example, the operator Krylov space for Floquet dynamics can be mapped to the dynamics of an edge operator of the one-dimensional Floquet inhomogeneous transverse field Ising model (ITFIM), where the latter, after a Jordan-Wigner transformation, is a Floquet model of noninteracting Majorana fermions and the couplings correspond to Krylov angles. We present an application of this showing that a moment method exists where given an autocorrelation function, one can construct the corresponding Krylov angles and from that the corresponding Floquet ITFIM. Consequently, when no solutions for the Krylov angles are obtained, it indicates that the autocorrelation is not generated by unitary dynamics. We highlight this by studying certain special cases: stable m-period dynamics derived using the method of continued fractions, exponentially decaying, and power-law decaying stroboscopic dynamics. Remarkably, our examples of stable m-period dynamics correspond to m-period edge modes for the Floquet ITFIM where, deep in the chain, the couplings correspond to a critical phase. Furthermore our results pave the way to engineer Floquet systems with desired properties of edge modes and also provide examples of persistent edge modes in gapless Floquet systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗