Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Modelling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Differential rotation and turbulent convection: A new Reynolds stress model and comparison with solar data

In most hydrodynamic cases, the existence of a turbulent flow superimposed on a mean flow is caused by a shear instability in the latter. Boussinesq suggested the first model for the turbulent Reynolds stresses bar-(u(sub i)u(sub j)) in which the mean shear S(sub ij) is the cause (or source) of turbulence represented by the stress bar-(u(sub i)u(sub j)). In the case of solar differential rotation, exactly the reverse physical process occurs: turbulence (which must pre-exist) generates a mean flow which manifests itself in the form of differential rotation. Thus, the Boussinesq model is wholly inadequate because in the solar case, cause and effect are reversed. Since the Boussinesq model is inadequate, one needs an alternative model for the Reynolds stresses. We present a new dynamical model for the Reynolds stresses, convective fluxes, turbulent kinetic energy, and temperature fluctuations. The complete model requires the solution of 11 differential equations. We then introduce a set of simplifying assumptions which reduce the full dynamical model to a set of algebraic Reynolds stress models. We explicitly solve one of these models that entails only one differential equation. The overall agreement with the data is obtained with a model that is neither phenomenological nor one that requires a full numerical simulation, since it is algebraic in nature. The new model can play an important role in understanding the complex physics underlying the interplay between solar differential rotation and convection, as many physical processes can naturally be incorporated into the model.

Canuto, V. M.↗

Model study of atmospheric transport using carbon 14 and strontium 90 as inert tracers

The observed excess carbon 14 in the atmosphere from 1963 to 1970 provides unique, but limited, data up to an altitude of about 35 km for testing the air motions calculated by 11 multidimensional atmospheric models. Strontium 90 measurements in the atmosphere from 1964 to mid-1967 provide data that have more latitude coverage than those of carbon 14 and are useful for testing combined models of air motions and aerosol settling. Model calculations for carbon 14 begin at October 1963, 9 months after the conclusion of the nuclear bomb tests; the initial conditions for the calculations are derived by three methods, each of which agrees fairly well with measured carbon 14 in October 1963 and each of which has widely different values in regions of the stratosphere where there were no carbon 14 measurements. The model results are compared to the stratospheric measurements, not as if the observed data were absolute standards, but in an effort to obtain new insight about the models and about the atmosphere. The measured carbon 14 vertical profiles at 31 deg N are qualitatively different from all of the models; the measured vertical profiles show a maximum mixing ratio in the altitude range of 20 to 25 km from October 1963 through July 1966, but all modeled profiles show mixing ratio maxima that increase in altitude from 20 km in October 1963 to greater than 40 km by April 1966. Both carbon 14 and strontium 90 data indicate that the models differ substantially among themselves with respect to stratosphere-troposphere exchange rate, but the modeled carbon 14 stratospheric residence times indicate that differences among the models are small with respect to transport rate between the middle stratosphere and the lower stratosphere. Strontium 90 data indicate that aerosol settling is important up to at least 35 km altitude. Relative to the measurements, about three quarters of the models transport carbon 14 from the lower stratosphere to the troposphere too rapidly, and all models with all three sets of initial conditions appear to sweep carbon 14 out of the midstratosphere (above 28 km) much more slowly than was observed from 1963 to 1970. Atmospheric dynamicists should seriously consider that the carbon 14 measurements imply with respect to advection in the midstratosphere.

Kinnison, D. E.↗

Development and initial test of the University of Wisconsin global isentropic-sigma model

The description of a global version of the University of Wisconsin (UW) hybrid isentropic-sigma (theta-sigma) model and the results from an initial numerical weather prediction experiment are presented in this paper. The main objectives of this initial test are to (1) discuss theta-sigma model development and computer requirements, (2) demonstrate the ability of the UW theta-sigma model for global numerical weather prediction using realistic orography and parameterized physical processes, and (3) compare the transport of an inert trace constituent against a nominally 'identical' sigma coordinate model. Initial and verifying data for the 5-day simulations presented in this work were supplied by the Goddard Earth Observing System (GEOS-1) data assimilation system. The time period studied is 1-6 February 1985. This validation experiment demonstrates that the global UW theta-sigma model produces a realistic 5-day simulation of the mass and momentum distributions when compared to both the identical sigma model and GEOS-1 verification. Root-mean-square errors demonstrate that the theta-sigma model is slightly more accurate than the nominally identical sigma model with respect to standard synoptic variables. Of particular importance, the UW theta-sigma model displays a distinct advantage over the conventional sigma model with respect to the prognostic simulation of inert trace constituent transport in amplifying baroclinic waves of the extratropics. This is especially true in the upper troposphere and stratosphere where the spatial integrity and conservation of an inert trace constituent is severely compromised in the sigma model compared to the theta-sigma model.

Zapotocny, Tom H.↗

A test of galaxy evolutionary models via angular sizes

The relationship between angular size, magnitude, and redshift of faint galaxies is explored as a potential tool to distinguish between galaxy evolutionary models. Different models, based on merging, mild luminosity evolution, and no evolution, lead to different predictions of the angular size distribution, redshift- size relation, and magnitude-size relation. The merging model predicts significantly smaller sizes for faint galaxies than the standard model, because of the requirement for more intrinsically small faint objects at high redshift. A dwarf-rich no-evolution model also predicts small sizes for faint galaxies. The mild luminosity evolution model predicts more luminous galaxies of large angular size at high redshift, as does a standard no-evolution model. Prefurbishment Hubble Space Telescope (HST) Medium Deep Survey observations of magnitudes and sizes of faint galaxies indicate an excess of small versus large faint galaxies, favoring the dwarf rich, no evolution model with respect to the merging model; the other two models are more discrepant with the data. While these results cannot yet rule out with certainty any of the proposed models, they demonstrate the potential of angular size to discriminate between models of galaxy evolution, especially with the high-resolution HST wide field/planetary camera-2 (WFPC2) data.

Im, Myungshin↗

Escarpment evolution on high-elevation rifted margins: Insights derived from a surface processes model that combines diffusion, advection and reaction

Experiments with a surface processes model of large-scale (1-1000 km) long-term (1-100 m.y.) erosional denudation are used to establish the controls on the evolution of a model escarpment that is related to the rifting of a continent. The mdoel describes changes in topographic form as a result of sumultaneous short- and long-range mass transport representing hillslope (diffusive) processes and fluvial transport (advection), repsectively. Fluvial entrainment is modeled as a first-order kinetic reaction which reflects the erodibility of the substrate, and therefore the fluvial system is not necessarily carrying at capacity. One dimensional and planform models demonstrate that the principal controls on the evolution of an initially steep model escarpment are (1) antecedent topography/drainage; (2) the timesale (or equivalently a length scale) in the fluvial entrainment reaction; (3) the flexural response of the lithosphere to denudation; and (4) the relative efficiencies of the short- and long-range transport processes. When rainfall and substrate lithology are uniform, a significant amount of discharge draining over the escarpment top causes it to degrade. Only when the top of the model escarpment coincides with a drainage divide can escarpment retreat occur for these conditions. An additional requirement for retreat of a model escarpment without decline is a long reaction time scale for fluvial entrainment. This corresponds to a substrate that is hard to detach by flucial erosion, and therefore to fluvial erosion that is not transport limited. Coninuous backtilting of an escarpment due ot flexural isostatic uplift in response to denudational unloading helps maintain the scarp top as a divide. It is essntial if the escarpment gradient is to be preserved during retreat in a uniform lithology. Low flexural rigidieties propote steep and slowly retreating escarpments. For given rainfall and substrate conditions, the morphology of a retraeating model escarpment is determined by the ratio of hte short-range diffusive and long range advective transport efficiencies. A low ration (which is interpreted to correspond to a more humid, temperate climate) produces a convex upper slope, and concave lower slope morphology and only major escarpments are predicted to preserve a high scarp gradient. Lithological contrasts in hte model produce more complex morphologies and predict the formation of scarps crowned by an erosionaly resistant caprock. However, resistant caprocks are not an essential requirement for model scarps to retreat. We conclude that the inferred controls and model behavior are both consistent with the present-day morphology of rifted continental margins and with modern conceptual models of landscape evolution.

Kooi, Henk↗

Molecular Sieve Bench Testing and Computer Modeling

The design of an efficient four-bed molecular sieve (4BMS) CO2 removal system for the International Space Station depends on many mission parameters, such as duration, crew size, cost of power, volume, fluid interface properties, etc. A need for space vehicle CO2 removal system models capable of accurately performing extrapolated hardware predictions is inevitable due to the change of the parameters which influences the CO2 removal system capacity. The purpose is to investigate the mathematical techniques required for a model capable of accurate extrapolated performance predictions and to obtain test data required to estimate mass transfer coefficients and verify the computer model. Models have been developed to demonstrate that the finite difference technique can be successfully applied to sorbents and conditions used in spacecraft CO2 removal systems. The nonisothermal, axially dispersed, plug flow model with linear driving force for 5X sorbent and pore diffusion for silica gel are then applied to test data. A more complex model, a non-darcian model (two dimensional), has also been developed for simulation of the test data. This model takes into account the channeling effect on column breakthrough. Four FORTRAN computer programs are presented: a two-dimensional model of flow adsorption/desorption in a packed bed; a one-dimensional model of flow adsorption/desorption in a packed bed; a model of thermal vacuum desorption; and a model of a tri-sectional packed bed with two different sorbent materials. The programs are capable of simulating up to four gas constituents for each process, which can be increased with a few minor changes.

Mohamadinejad, Habib↗

Computer-aided operations engineering with integrated models of systems and operations

CONFIG 3 is a prototype software tool that supports integrated conceptual design evaluation from early in the product life cycle, by supporting isolated or integrated modeling, simulation, and analysis of the function, structure, behavior, failures and operation of system designs. Integration and reuse of models is supported in an object-oriented environment providing capabilities for graph analysis and discrete event simulation. Integration is supported among diverse modeling approaches (component view, configuration or flow path view, and procedure view) and diverse simulation and analysis approaches. Support is provided for integrated engineering in diverse design domains, including mechanical and electro-mechanical systems, distributed computer systems, and chemical processing and transport systems. CONFIG supports abstracted qualitative and symbolic modeling, for early conceptual design. System models are component structure models with operating modes, with embedded time-related behavior models. CONFIG supports failure modeling and modeling of state or configuration changes that result in dynamic changes in dependencies among components. Operations and procedure models are activity structure models that interact with system models. CONFIG is designed to support evaluation of system operability, diagnosability and fault tolerance, and analysis of the development of system effects of problems over time, including faults, failures, and procedural or environmental difficulties.

Malin, Jane T.↗

Modal Correction Method For Dynamically Induced Errors In Wind-Tunnel Model Attitude Measurements

This paper describes a method for correcting the dynamically induced bias errors in wind tunnel model attitude measurements using measured modal properties of the model system. At NASA Langley Research Center, the predominant instrumentation used to measure model attitude is a servo-accelerometer device that senses the model attitude with respect to the local vertical. Under smooth wind tunnel operating conditions, this inertial device can measure the model attitude with an accuracy of 0.01 degree. During wind tunnel tests when the model is responding at high dynamic amplitudes, the inertial device also senses the centrifugal acceleration associated with model vibration. This centrifugal acceleration results in a bias error in the model attitude measurement. A study of the response of a cantilevered model system to a simulated dynamic environment shows significant bias error in the model attitude measurement can occur and is vibration mode and amplitude dependent. For each vibration mode contributing to the bias error, the error is estimated from the measured modal properties and tangential accelerations at the model attitude device. Linear superposition is used to combine the bias estimates for individual modes to determine the overall bias error as a function of time. The modal correction model predicts the bias error to a high degree of accuracy for the vibration modes characterized in the simulated dynamic environment.

Buehrle, R. D.↗

Existing and Required Modeling Capabilities for Evaluating ATM Systems and Concepts

ATM systems throughout the world are entering a period of major transition and change. The combination of important technological developments and of the globalization of the air transportation industry has necessitated a reexamination of some of the fundamental premises of existing Air Traffic Management (ATM) concepts. New ATM concepts have to be examined, concepts that may place more emphasis on: strategic traffic management; planning and control; partial decentralization of decision-making; and added reliance on the aircraft to carry out strategic ATM plans, with ground controllers confined primarily to a monitoring and supervisory role. 'Free Flight' is a case in point. In order to study, evaluate and validate such new concepts, the ATM community will have to rely heavily on models and computer-based tools/utilities, covering a wide range of issues and metrics related to safety, capacity and efficiency. The state of the art in such modeling support is adequate in some respects, but clearly deficient in others. It is the objective of this study to assist in: (1) assessing the strengths and weaknesses of existing fast-time models and tools for the study of ATM systems and concepts and (2) identifying and prioritizing the requirements for the development of additional modeling capabilities in the near future. A three-stage process has been followed to this purpose: 1. Through the analysis of two case studies involving future ATM system scenarios, as well as through expert assessment, modeling capabilities and supporting tools needed for testing and validating future ATM systems and concepts were identified and described. 2. Existing fast-time ATM models and support tools were reviewed and assessed with regard to the degree to which they offer the capabilities identified under Step 1. 3 . The findings of 1 and 2 were combined to draw conclusions about (1) the best capabilities currently existing, (2) the types of concept testing and validation that can be carried out reliably with such existing capabilities and (3) the currently unavailable modeling capabilities that should receive high priority for near-term research and development. It should be emphasized that the study is concerned only with the class of 'fast time' analytical and simulation models. 'Real time' models, that typically involve humans-in-the-loop, comprise another extensive class which is not addressed in this report. However, the relationship between some of the fast-time models reviewed and a few well-known real-time models is identified in several parts of this report and the potential benefits from the combined use of these two classes of models-a very important subject-are discussed in chapters 4 and 7.

Odoni, Amedeo R.↗

Accurate Modeling of the Postbuckling Response of Composite Panels with Skewed Stiffeners

Modeling procedures which predict accurately the postbuckling response of composite panels with skewed stiffeners are presented. A particular experimental program is considered and detailed finite element models are created to represent the conditions in the experiment. First, a simple baseline model with minimal detail is defined. Then, a number of modeling refinements that improve the accuracy of the model are identified. These refinements are applied individually to the baseline model to assess the effect of each refinement on the predicted response. The individual refinements are then combined to create an advanced finite element model. In addition to model refinements which affect the overall panel response, a modeling procedure for simulating nonuniform initial load introduction that is specific to an particular experiment is described and demonstrated. By implementing a number of modeling refinements, a finite element model is developed which improves the correlation between the measured and predicted responses. The skewed stiffener detail and anisotropic skin in the selected problem create axial-shear stiffness coupling which makes this problem sensitive to the constraint on the shear displacement. The remainder of the modeling refinements considered are applicable to general structural configurations. The results presented may be used to guide future efforts to improve correlation between predicted and measured responses for post buckled stiffened panels.

Young, Richard D.↗

Survey of Turbulence Models for the Computation of Turbulent Jet Flow and Noise

The report presents an overview of jet noise computation utilizing the computational fluid dynamic solution of the turbulent jet flow field. The jet flow solution obtained with an appropriate turbulence model provides the turbulence characteristics needed for the computation of jet mixing noise. A brief account of turbulence models that are relevant for the jet noise computation is presented. The jet flow solutions that have been directly used to calculate jet noise are first reviewed. Then, the turbulent jet flow studies that compute the turbulence characteristics that may be used for noise calculations are summarized. In particular, flow solutions obtained with the k-e model, algebraic Reynolds stress model, and Reynolds stress transport equation model are reviewed. Since, the small scale jet mixing noise predictions can be improved by utilizing anisotropic turbulence characteristics, turbulence models that can provide the Reynolds stress components must now be considered for jet flow computations. In this regard, algebraic stress models and Reynolds stress transport models are good candidates. Reynolds stress transport models involve more modeling and computational effort and time compared to algebraic stress models. Hence, it is recommended that an algebraic Reynolds stress model (ASM) be implemented in flow solvers to compute the Reynolds stress components.

Nallasamy, N.↗

Computer Aided Modeling to Determine the Effectiveness of Resistive Exercises as Countermeasures for Bone Mineral Density Loss

Due to the loss of gravitational loading, astronauts have a tendency to lose bone mineral density in their lumbar spine and lower extremities on orbit. NASA requires astronauts to perform exercises during space flight to help reduce the amount of demineralization. To test these exercises on earth, 17 week bed rest studies are conducted that consist of specific diet and exercise regimes. Developing a finite element model of these exercises will help to quantify the stress distribution imposed by of each of these exercises. To help develop this model, MRI images are acquired from individuals participating in the bed rest studies. The MRIs can be used to create a subject specific model of each individual for testing. The MRIs are processed in the Magnetic Resonance Imaging Data Transfer System program to develop a three-dimensional finite element model of the femur for evaluation. Modifications were made to the MRIDTS that simplified the model creation process. These modifications made it possible to construct two separate models of different portions of a bone simultaneously and then later connect them manually. This helped alleviate the warping problem associated with the drastic changes in geometry found in some body parts, such as the joints. The code was also modified to incorporate material properties of various bone components into the model. Interior meshing was also incorporated into the program to allow for both the cortical shell and the entire bone to be modeled. A prototype model of the right femur of an adult female is being constructed and tested to determine the feasibility of finite element analysis as a tool for evaluating exercise effectiveness. The model is being run through the ANSYS finite element program on the Alabama Super Computer Network. After the model is validated, models of bedrest subjects can be generated to investigate exercise countermeasures.

Murphy, Benjamin M.↗

Mesoscale Simulations of a Florida Sea Breeze Using the PLACE Land Surface Model Coupled to a 1.5-Order Turbulence Parameterization

A sophisticated land-surface model, PLACE, the Parameterization for Land Atmospheric Convective Exchange, has been coupled to a 1.5-order turbulent kinetic energy (TKE) turbulence sub-model. Both have been incorporated into the Penn State/National Center for Atmospheric Research (PSU/NCAR) mesoscale model MM5. Such model improvements should have their greatest effect in conditions where surface contrasts dominate over dynamic processes, such as the simulation of warm-season, convective events. A validation study used the newly coupled model, MM5 TKE-PLACE, to simulate the evolution of Florida sea-breeze moist convection during the Convection and Precipitation Electrification Experiment (CaPE). Overall, eight simulations tested the sensitivity of the MM5 model to combinations of the new and default model physics, and initialization of soil moisture and temperature. The TKE-PLACE model produced more realistic surface sensible heat flux, lower biases for surface variables, more realistic rainfall, and cloud cover than the default model. Of the 8 simulations with different factors (i.e., model physics or initialization), TKE-PLACE compared very well when each simulation was ranked in terms of biases of the surface variables and rainfall, and percent and root mean square of cloud cover. A factor separation analysis showed that a successful simulation required the inclusion of a multi-layered, land surface soil vegetation model, realistic initial soil moisture, and higher order closure of the planetary boundary layer (PBL). These were needed to realistically model the effect of individual, joint, and synergistic contributions from the land surface and PBL on the CAPE sea-breeze, Lake Okeechobee lake breeze, and moist convection.

Lynn, Barry H.↗

Modeling of Nonacoustic Combustion Instability in Simulations of Hybrid Motor Tests

A transient model of a hybrid motor was formulated to study the cause and elimination of nonacoustic combustion instability. The transient model was used to simulate four key tests out of a series of seventeen hybrid motor tests conducted by Thiokol, Rocketdyne, and Martin Marietta at NASA Marshall Space Flight Center (MSFC). These tests were performed under the Hybrid Propulsion Technology for Launch Vehicle Boosters (HPTLVB) program. The first test resulted in stable combustion. The second test resulted in large-amplitude, 6.5-Hz chamber pressure oscillations that gradually damped away by the end of the test. The third test resulted in large-amplitude, 7.5-Hz chamber pressure oscillations that were sustained throughout the test. The seventh test resulted in elimination of combustion instability with the installation of an orifice immediately upstream of the injector. Formulation and implementation of the model are the scope of this presentation. The current model is an independent continuation of modeling presented previously by joint Thiokol-Rocketdyne collaborators Boardman, Hawkins, Wassom. and Claflin. The previous model simulated an unstable independent research and development (IR&D) hybrid motor test performed by Thiokol. There was very good agreement between the model and test data. Like the previous model, the current model was developed using Matrix-x simulation software. However, tests performed at MSFC under the HPTLVB program were actually simulated. ln the current model, the hybrid motor, consisting of the liquid oxygen (lox) injector, the multiport solid fuel grain, and nozzle, was simulated. The lox feedsystem, consisting of the tank, venturi. valve, and feed lines, was also simulated in the model. All components of the hybrid motor and lox feedsystem are treated by a lumped-parameter approach. Agreement between the results of the transient model and actual test data was very good. This agreement between simulated and actual test data indicated that the combustion instability in the hybrid motor was due to two causes: 1. a lox feed system of insufficient stiffness, and 2. a lox injector with an impedance (it pressure drop that was too low to provide damping against the feed system oscillations. Also, it was discovered that testing with a new grain of solid fuel sustained the combustion instability. However, testing with a used grain of solid fuel caused the combustion instability to gradually decay.

Rocker, M.↗

Loss of Signal Transduction and Inhibition of Lymphocyte Locomotion in a Ground-Based Model of Microgravity

Inflammatory adherence to, and locomotion through the interstitium is an important component of the immune response. Conditions such as true gravity (TG) and modeled microgravity (MMG) severely inhibit lymphocyte locomotion in vitro through gelled Type I collagen (Pellis et al., 1994, 1997). We used the rotating-wall vessel bioreactor (RWV) as a prototype for modeled microgravity. After observing that lymphocyte locomotion was severely affected in modeled microgravity, we found that polyclonal activation of lymphocytes before exposure to modeled microgravity reversed the locomotion inhibition. Phorbol myristate acetate (PMA) treatment of normal peripheral blood lymphocytes, after exposure to modeled microgravity, restored lymphocyte locomotion by 84%. Calcium ionophore had no effect on modeled microgravity-exposed lymphocytes. Therefore, the signal pathways involving calcium may not be affected by modeled microgravity. However, direct activation of Protein Kinase C (PKC) with PMA was effective in restoring locomotion in modeled microgravity almost comparable to normal levels in lymphocytes cultured in static T flasks. Thus, events either at the level of PKC or upstream are affected by modeled microgravity. Treatment of lymphocytes with mitomycin C prior to exposure to modeled microgravity, followed by PMA, restored locomotion to the same extent as nonmitomycin C-treated lymphocytes exposed to modeled microgravity (80-85%). Therefore 1) new DNA synthesis is not necessary to restore locomotion and 2) traditional activation and locomotion share common pathways up to PKC. Thereafter the signals diverge. Furthermore PMA added immediately before or after initiation of modeled microgravity prevents the loss of lymphocyte locomotion.

Sundaresan, Alamelu↗

Adaptive Error Estimation in Linearized Ocean General Circulation Models

Data assimilation methods are routinely used in oceanography. The statistics of the model and measurement errors need to be specified a priori. This study addresses the problem of estimating model and measurement error statistics from observations. We start by testing innovation based methods of adaptive error estimation with low-dimensional models in the North Pacific (5-60 deg N, 132-252 deg E) to TOPEX/POSEIDON (TIP) sea level anomaly data, acoustic tomography data from the ATOC project, and the MIT General Circulation Model (GCM). A reduced state linear model that describes large scale internal (baroclinic) error dynamics is used. The methods are shown to be sensitive to the initial guess for the error statistics and the type of observations. A new off-line approach is developed, the covariance matching approach (CMA), where covariance matrices of model-data residuals are "matched" to their theoretical expectations using familiar least squares methods. This method uses observations directly instead of the innovations sequence and is shown to be related to the MT method and the method of Fu et al. (1993). Twin experiments using the same linearized MIT GCM suggest that altimetric data are ill-suited to the estimation of internal GCM errors, but that such estimates can in theory be obtained using acoustic data. The CMA is then applied to T/P sea level anomaly data and a linearization of a global GFDL GCM which uses two vertical modes. We show that the CMA method can be used with a global model and a global data set, and that the estimates of the error statistics are robust. We show that the fraction of the GCM-T/P residual variance explained by the model error is larger than that derived in Fukumori et al.(1999) with the method of Fu et al.(1993). Most of the model error is explained by the barotropic mode. However, we find that impact of the change in the error statistics on the data assimilation estimates is very small. This is explained by the large representation error, i.e. the dominance of the mesoscale eddies in the T/P signal, which are not part of the 21 by 1" GCM. Therefore, the impact of the observations on the assimilation is very small even after the adjustment of the error statistics. This work demonstrates that simult&neous estimation of the model and measurement error statistics for data assimilation with global ocean data sets and linearized GCMs is possible. However, the error covariance estimation problem is in general highly underdetermined, much more so than the state estimation problem. In other words there exist a very large number of statistical models that can be made consistent with the available data. Therefore, methods for obtaining quantitative error estimates, powerful though they may be, cannot replace physical insight. Used in the right context, as a tool for guiding the choice of a small number of model error parameters, covariance matching can be a useful addition to the repertory of tools available to oceanographers.

Chechelnitsky, Michael Y.↗

Innovative Liner Concepts: Experiments and Impedance Modeling of Liners Including the Effect of Bias Flow

The study of normal impedance of perforated plate acoustic liners including the effect of bias flow was studied. Two impedance models were developed by modeling the internal flows of perforate orifices as infinite tubes with the inclusion of end corrections to handle finite length effects. These models assumed incompressible and compressible flows, respectively, between the far field and the perforate orifice. The incompressible model was used to predict impedance results for perforated plates with percent open areas ranging from 5% to 15%. The predicted resistance results showed better agreement with experiments for the higher percent open area samples. The agreement also tended to deteriorate as bias flow was increased. For perforated plates with percent open areas ranging from 1% to 5%, the compressible model was used to predict impedance results. The model predictions were closer to the experimental resistance results for the 2% to 3% open area samples. The predictions tended to deteriorate as bias flow was increased. The reactance results were well predicted by the models for the higher percent open area, but deteriorated as the percent open area was lowered (5%) and bias flow was increased. A fit was done on the incompressible model to the experimental database. The fit was performed using an optimization routine that found the optimal set of multiplication coefficients to the non-dimensional groups that minimized the least squares slope error between predictions and experiments. The result of the fit indicated that terms not associated with bias flow required a greater degree of correction than the terms associated with the bias flow. This model improved agreement with experiments by nearly 15% for the low percent open area (5%) samples when compared to the unfitted model. The fitted model and the unfitted model performed equally well for the higher percent open area (10% and 15%).

Kelly, Jeff↗

Electronic Model of a Ferroelectric Field Effect Transistor

A pair of electronic models has been developed of a Ferroelectric Field Effect transistor. These models can be used in standard electrical circuit simulation programs to simulate the main characteristics of the FFET. The models use the Schmitt trigger circuit as a basis for their design. One model uses bipolar junction transistors and one uses MOSFET's. Each model has the main characteristics of the FFET, which are the current hysterisis with different gate voltages and decay of the drain current when the gate voltage is off. The drain current from each model has similar values to an actual FFET that was measured experimentally. T'he input and o Output resistance in the models are also similar to that of the FFET. The models are valid for all frequencies below RF levels. No attempt was made to model the high frequency characteristics of the FFET. Each model can be used to design circuits using FFET's with standard electrical simulation packages. These circuits can be used in designing non-volatile memory circuits and logic circuits and is compatible with all SPICE based circuit analysis programs. The models consist of only standard electrical components, such as BJT's, MOSFET's, diodes, resistors, and capacitors. Each model is compared to the experimental data measured from an actual FFET.

MacLeod, Todd C.↗