Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MINERALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Effect of Minerals on the Removal of Uranium (VI) in the Presence of Humic Acid and Colloidal Silica - 19406

Uranium is one of the key contaminants of concern in groundwater as a result of past nuclear processing activities at the Department of Energy (DOE) facilities such as the Savannah River Site (SRS) in Aiken, South Carolina. SRS was one of the major nuclear processing facilities during the Cold War where plutonium was produced. Beginning with the implementation of the environmental cleanup program in 1981, SRS has become a hazardous waste management facility responsible for the storage and remediation of contaminated soil and groundwater from radionuclides. Approximately 1.8 billion gallons of acidic waste containing radionuclides and dissolved heavy metals was disposed in the F/H Area seepage basins. This led to the unintentional creation of highly contaminated groundwater plumes, consisting of radionuclides with an acidic pH between 3 and 5.5. The acidity of the plumes contributed to the mobility of several constituents of concern (COC) such as tritium ({sup 3}H), uranium-238 ({sup 238}U), iodine-129 ({sup 129}I), and strontium-90 ({sup 90}Sr) for the F-Area plume and {sup 3}H, {sup 90}Sr and mercury for the H-Area plume. This investigation will focus on uranium in the oxidation state +6 (U(VI)), which is a key contaminant of concern in the groundwater plume of the FArea. Initially, the pump-treat-reinject system was implemented from 1997 to 2003 to remove contaminants from polluted groundwater. Downgrade groundwater within the system would be pumped to the water treatment facility and re-injected upgrade within the aquifer. The effectiveness and sustainability of this process diminished over time. Therefore, it was discontinued and replaced with a funnel-and-gate process in 2004. This new process injects sodium hydroxide directly into the gates of the F-Area groundwater to effectively raise pH levels. By raising the pH of the groundwater, a treatment zone is created by reversing the acidic nature of the contaminated sediments and producing a negative net charge on the surface of sediment particles. As a result, the adsorption of cationic contaminants is expected to be enhanced. So far, this process has resulted in a decrease of {sup 90}Sr and {sup 238}U concentrations, though the concentration of iodine has been unaffected by this treatment. The solution used for the injections contains a high carbonate alkalinity in order to overcome the surface acidic conditions and natural partitions in the groundwater system. To maintain the neutral pH in the treatment zone, systematic injections are required. The continuous use of high concentrations of a carbonate solution to raise pH could re-mobilize uranium previously adsorbed within the treatment zone, though this has not been observed in the monitoring data. Humic substances (HS) are major components of soil organic matter. HS are polyfunctional organic macromolecules formed by the chemo-microbiological decomposition of biomass or dead organic matter. These substances are usually divided into three main fractions: humin (insoluble at all pH values), humic acid (soluble at pH greater than 3.5), and fulvic acid (soluble at all pH values). Humic acid carries a large number of functional groups such as aromatic rings, carboxyl groups, phenols, aliphatic chains, etc. Humic acid is an important ion exchange and metal complexing ligand with a high complexation capacity. The ability of humic acid to chemically bind to metals influences in their migration behavior and fate in natural systems. Various studies have suggested that the retention of U(VI) via sorption in the presence of humic acid is a complex process. For instance, humic acid can form an organic coating at the surface of minerals, which can enhance the sequestration of metals. Ivanov et al. (2012) studied the sorption of U(VI) sorption onto bentonite in the presence and absence of humic acid. The study found that uranium sorption in the presence of humic acid was enhanced at low pH (below 3.8) while at moderate pH (3.8 and 6.5) uranium sorption was reduced compared to the absence of humic acid. At high pH (7 and 9), uranium sorption was reduced for both the presence and absence of humic acid. Also, Krepelova et al. (2007) not only found that U(VI) sorption onto kaolinite was influenced by pH, U(VI) concentration, the presence of inorganic carbon species, and humic acid but also that U(VI) preferred to be adsorbed onto kaolinite as a uranyl-humate complex. This investigation analyzed the mechanisms of the synergetic interactions of humic acid and colloidal silica on the removal of uranium in the presence of pure minerals such as quartz, kaolinite and goethite which are characteristic of the F/H area. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

An Analysis of the Published Mineral Resource Estimates of the Haji-Gak Iron Deposit, Afghanistan

The Haji-Gak iron deposit of eastern Bamyan Province, eastern Afghanistan, was studied extensively and resource calculations were made in the 1960s by Afghan and Russian geologists. Recalculation of the resource estimates verifies the original estimates for categories A (in-place resources known in detail), B (in-place resources known in moderate detail), and C{sub 1} (in-place resources estimated on sparse data), totaling 110.8 Mt, or about 6% of the resources as being supportable for the methods used in the 1960s. C{sub 2} (based on a loose exploration grid with little data) resources are based on one ore grade from one drill hole, and P{sub 2} (prognosis) resources are based on field observations, field measurements, and an ore grade derived from averaging grades from three better sampled ore bodies. C{sub 2} and P{sub 2} resources are 1,659.1 Mt or about 94% of the total resources in the deposit. The vast P{sub 2} resources have not been drilled or sampled to confirm their extent or quality. The purpose of this article is to independently evaluate the resources of the Haji-Gak iron deposit by using the available geologic and mineral resource information including geologic maps and cross sections, sampling data, and the analog-estimating techniques of the 1960s to determine the size and tenor of the deposit.

58 GEOSCIENCES↗

Magnetic order near 270 K in mineral and synthetic Mn{sub 2}FeSbO{sub 6} ilmenite

The structural and magnetic properties of Mn{sub 2}FeSbO{sub 6} single-crystalline mineral and ceramic samples synthesized under thermobaric treatment have been investigated, and compared to theoretical predictions based on first-principles electronic structure calculations. This ilmenite system displays a sharp magnetic transition just below the room temperature related to a ferrimagnetic ordering of the Mn{sup 2+} and Fe{sup 3+} cations, which makes Mn{sub 2}FeSbO{sub 6} a promising candidate for designing functional magnetic materials.

36 MATERIALS SCIENCE↗

SubTER ZTEM (Z-Axis Tipper Electromagnetic) Survey Results, Mineral Mountains Area, Utah

This data was acquired as part of the Subsurface Science, Technology and Engineering Research, and Development (SubTER) Crosscut which is a collaboration across the Department of Energy offices involved in research activities in energy production/extraction, subsurface storage, and environmental remediation. The contents of this zip contains the ZTEM survey measured and processed results for the Mineral Mountains area, Utah. The data were acquired through subcontract to Geotech Inc of Aurora, ON, Canada and their narrative report is included. There are also two readme.txt file included that further describe the data.

15 GEOTHERMAL ENERGY↗

Retrospective Analysis of Geothermal Mineral Recovery and Domestic Resource Assessment - References

This reference database in RIS format contains all of the references that were collected as part of our retrospective analysis of geothermal mineral recovery (REE and Li) activities and domestic resource assessment. The outputs detail the chemistry and molecular processes used in lithium recovery from geothermal brines. The articles included include information about the study including more information on geothermal brines and the technologies used for recovering lithium from geothermal brines.

15 GEOTHERMAL ENERGY↗

Geothermal Mineral Alterations in Brady and Desert Peak

Results of the analysis of HyMap's spectra against know hydrothermally altered minerals in the Brady-Desert Peak Geothermal Areas. This is the post-processing results and final analysis results of applying target detection algorithms and then fusing the results.

15 GEOTHERMAL ENERGY↗

Measure Guideline: Three High Performance Mineral Fiber Insulation Board Retrofit Solutions

This Measure Guideline describes a high performance enclosure retrofit package that uses mineral fiber insulation board. The Measure Guideline describes retrofit assembly and details for wood frame roof and walls and for cast concrete foundations. This Measure Guideline is intended to serve contractors and designers seeking guidance for non-foam exterior insulation retrofit.

&#8203↗

Measure Guideline: Three High Performance Mineral Fiber Insulation Board Retrofit Solutions

This Measure Guideline describes a high performance enclosure retrofit package that uses mineral fiber insulation board, and is intended to serve contractors and designers seeking guidance for non-foam exterior insulation retrofit processes. The guideline describes retrofit assembly and details for wood frame roof and walls and for cast concrete foundations.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Mineral-Associated Organic Matter Concentration Beneath Northern Temperate Trees Varies by Mycorrhizal Type and Leaf Habit

Mycorrhizal fungi are important drivers of soil organic matter dynamics, but it can be difficult to isolate the effects of the fungi themselves from covarying traits of their host trees. For example, many trees with an evergreen leaf habit associate with ectomycorrhizal (ECM) fungi, while many deciduous tree species associate with arbuscular mycorrhizal (AM) fungi. Because leaf habit influences the quantity and quality of organic matter inputs to soil, it is often an important factor in soil carbon and nitrogen dynamics, and thus can mask the effects of mycorrhizal fungi on soil organic matter processes. We evaluated how tree mycorrhizal associations and leaf habit separately influence the amount and composition of mineral-associated organic matter (MAOM) and particulate organic matter (POM) in forest soils in New Hampshire and Vermont, USA. We measured carbon (C) and nitrogen (N) concentrations and C/N ratios of three soil density fractions beneath six tree species that vary in mycorrhizal association and leaf habit. We found lower concentrations of MAOM C and N beneath evergreen vs. deciduous trees, but only for tree species associating with AM fungi. Further, MAOM C/N was higher beneath evergreen trees and beneath trees with ECM fungi rather than AM fungi. Furthermore, these results add to the growing body of support for mycorrhizal fungi as mediators of soil organic matter dynamics, suggesting that the MAOM fraction is more sensitive to leaf habit beneath AM-associated versus ECM-associated trees. Because MAOM decomposition is thought to be less responsive than POM decomposition to changes in soil temperature and moisture, differences in the tendency of AM- and ECM-dominated forests to support MAOM formation and persistence may lead to systematic differences in the response of these forest types to ongoing climate change.

54 ENVIRONMENTAL SCIENCES↗

Experimentally simulated sea level rise destabilizes carbon-mineral associations in temperate tidal marsh soil

How sea level rise (SLR) alters carbon (C) dynamics in tidal salt marsh soils is unresolved. Changes in hydrodynamics could influence organo-mineral associations, influencing dissolved organic carbon (DOC) fluxes. As SLR increases the duration of inundation, we hypothesize that lateral DOC export will increase due to reductive dissolution of C-bearing iron (Fe) oxides, destabilizing soil C stocks and influencing greenhouse gas emissions. To test this, soil cores (0–8 cm depth) were collected from the high marsh of a temperate salt marsh that currently experiences changes in water level and soil redox oscillation due to spring-neap tides. Mesocosms experimentally simulated SLR by continuously inundating high marsh soils and were compared to mesocosms with Control conditions, where the water level oscillated on a spring-neap cycle. Porewater DOC, lateral DOC, and porewater reduced Fe (Fe 2+ ) concentrations were significantly higher in SLR treatments (1.7 ± 0.5 mM, 0.63 ± 0.14 mM, and 0.15 ± 0.11 mM, respectively) than Control treatments (1.2 ± 0.35 mM, 0.56 ± 0.15 mM, and 0.08 ± 01 mM, respectively Solid phase analysis with Fe extended X-ray absorption fine-structure spectroscopy further revealed that SLR led to > 3 times less Fe oxide-C coprecipitates than Control conditions In addition, the overall global warming potential (GWP) decreased under SLR due to suppressed CO 2 emissions. Our data suggest that SLR may increase lateral C export of current C stocks by dissolving C-bearing Fe oxides but decrease the overall GWP from emissions of soil trace gases. Finally, these findings have implications for understanding the fate of SOC dynamics under future SLR scenarios.

dissolved organic carbon↗

Central Band Structures: New Insights into the Coupling Effects Between the Pores and Minerals of Sinter

It is important to elucidate the coupling effects that exist between the pores and minerals of sinter to establish the relationships that exist among the technological parameters, microstructures, and performance of the sinter. Based on the formation mechanism of the pores within sinter, four types of central band structures (CBSs) were defined to represent the microstructures of the sinter. During reduction, the cracking behavior of each CBS was studied through a series of experiments conducted at a temperature of 873 K.

36 MATERIALS SCIENCE↗

Study of the Influence of Xanthate Derivative Structures on Copper Sulfide Mineral Adsorption Under Acidic Conditions

Adsorption of commercial xanthate derivatives on copper sulfide mineral (covellite, CuS) was studied by kinetics and isotherm adsorption experiments. The adsorption of xanthate derivatives was confirmed by FTIR (Fourier transform infrared spectroscopy) and XPS (X-ray photoelectron spectroscopy) results. Experiments were performed with two different xanthate derivatives, C-4410 (O-pentyl S-2-propenyl ester) and C-4940 (isobutyl xanthogen ethyl formate), on individual doses of 0.05 g of powdered covellite. It was found that the equilibrium times at pH 2, 4, and 6 were different for both xanthate derivatives. The shortest times were achieved at pH 2 and 4. The results suggest that C-4110 can be used as collector in a wide range of pH, while C-4940 is limited to lower pH values. Pseudo first- and pseudo second-order kinetics models were thus applied to the experimental data for pH 2. The information obtained from the kinetics models combined with XPS allowed proposing the adsorption mechanism for the covellite-xanthate derivative pair. The adsorption takes place through a non-covalent interaction for C-4410 and chemisorption process for C-4940. The best-fitting isotherm models for C-4410 and C-4940 adsorption were Redlich–Peterson and Freundlich, respectively, which yield a maximum adsorption capacity of 57.07 mg g{sup −1} for C-4410 and 44.62 mg g{sup −1} for C-4940.

36 MATERIALS SCIENCE↗

A review of coarse mineral dust in the Earth system

Mineral dust particles suspended in the atmosphere span more than three orders of magnitude in diameter, from <0.1 µm to more than 100 µm. This wide size range makes dust a unique aerosol species with the ability to interact with many aspects of the Earth system, including radiation, clouds, hydrology, atmospheric chemistry, and biogeochemistry. This review focuses on coarse and super-coarse dust aerosols, which we respectively define as dust particles with a diameter of 2.5–10 µm and 10–62.5 µm. We review several lines of observational evidence indicating that coarse and super-coarse dust particles are transported farther than previously expected and that the abundance of these particles is substantially underestimated in current global models. We synthesize previous studies that used observations, theories, and model simulations to highlight the impacts of coarse and super-coarse dust aerosols on the Earth system, including their effects on dust-radiation interactions, dust-cloud interactions, atmospheric chemistry, and biogeochemistry. Specifically, coarse and super-coarse dust aerosols produce a net positive direct radiative effect (warming) at the top of the atmosphere and can modify temperature and water vapor profiles, influencing the distribution of clouds and precipitation. In addition, coarse and super-coarse dust aerosols contribute a substantial fraction of ice-nucleating particles, especially at temperatures above –23 °C. They also contribute a substantial fraction to the available reactive surfaces for atmospheric processing and the dust deposition flux that impacts land and ocean biogeochemistry by supplying important nutrients such as iron and phosphorus. Furthermore, we examine several limitations in the representation of coarse and super-coarse dust aerosols in current model simulations and remote-sensing retrievals. Because these limitations substantially contribute to the uncertainties in simulating the abundance and impacts of coarse and super-coarse dust aerosols, we offer some recommendations to facilitate future studies. Overall, we conclude that an accurate representation of coarse and super-coarse properties is critical in understanding the impacts of dust aerosols on the Earth system.

54 ENVIRONMENTAL SCIENCES↗

A chemistry-informed hybrid machine learning approach to predict metal adsorption onto mineral surfaces

Historically, surface complexation model (SCM) constants and distribution coefficients (K d ) have been employed to quantify mineral-based retardation effects controlling the fate of metals in subsurface geologic systems. Our recent SCM development workflow, based on the Lawrence Livermore National Laboratory Surface Complexation/Ion Exchange (L-SCIE) database, illustrated a community FAIR data approach to SCM development by predicting uranium(VI)-quartz adsorption for a large number of literature-mined data. Here, we present an alternative hybrid machine learning (ML) approach that shows promise in achieving equivalent high-quality predictions compared to traditional surface complexation models. At its core, the hybrid random forest (RF) ML approach is motivated by the proliferation of incongruent SCMs in the literature that limit their applicability in reactive transport models. Our hybrid ML approach implements PHREEQC-based aqueous speciation calculations; values from these simulations are automatically used as input features for a random forest (RF) algorithm to quantify adsorption and avoid SCM modeling constraints entirely. Named the LLNL Speciation Updated Random Forest (L-SURF) model, this hybrid approach is shown to have applicability to U(VI) sorption cases driven by both ion-exchange and surface complexation, as is shown for quartz and montmorillonite cases. The approach can be applied to reactive transport modeling and may provide an alternative to the costly development of self-consistent SCM reaction databases.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Development of a stoichiometric magnesium potassium phosphate cement (MKPC) for the immobilization of powdered minerals

Ordinary Portland Cement (OPC)-based materials are not systematically adapted for immobilizing industrial hazardous waste, e.g. for aluminium powder or plutonium waste sludge. In such case, Magnesium Potassium Phosphate Cements (MKPC) represent an interesting alternative. }The originality of this research is to develop a formulation of a MKPC paste for hazardous waste immobilization, which incorporates a maximum amount of such waste, preferably in powdered form. To this purpose, a stoichiometric MKPC paste is selected, and its properties are improved by powdered waste addition. }Firstly, the physico-chemical mechanisms generating expansion in stoichiometric MKPC paste are analyzed. Swelling is attributed to a pH gradient in the paste, due to the progressive sedimentation of MgO particles in the fresh mix. }Secondly, over-stoichiometric MgO is replaced by varying amounts of minerals simulating the waste, of different mineralogy and granulometry, in order to achieve sufficient workability and no swelling. An optimal formulation is proposed, which incorporates powdered fly ash at a fine-to-cement mass ratio (F/C) of 1. Its mechanical performance and endogenous dimensional changes are comparable to typical over-stoichiometric pastes, and they stabilize between 7 and 28 days.

36 MATERIALS SCIENCE↗

Evolution of planar fractures in limestone: The role of flow rate, mineral heterogeneity and local transport processes

In this study, the processes that affect the evolution of fracture geometry and reactive transport in limestone fractures were evaluated using an integrated experimental and modeling approach. Flow-through experiments were performed to investigate the alteration of three artificially made planar limestone fractures, which were exposed to HCl-acidified water flow (pH 3.8 ± 0.1) at three different rates. Reactive infiltration instability developed in the fractures because of small fracture aperture variations and naturally occurring heterogeneity in the rock, i.e., the presence of clay spots of higher porosity. The dissolution regime changed from conical to dominant and ramified wormhole with increasing flow rate, i.e., Péclet number. Maps of fracture aperture obtained from X-ray micro-tomography imaging, together with measurements of permeability and analyses of fluid chemistry, provided experimental constraints for modeling. Numerical simulations were performed using a 2.5D continuum reactive transport model to examine the development of flow patterns and the reactivity and permeability evolution over time, and to interrogate the impacts of fluid reactivity, mineral heterogeneity and diffusive boundary layer. The modeling results showed that fracture alteration is very sensitive to initial fluid reactivity and mineralogical heterogeneity, in addition to flow rate. Finally, the changes of local transport processes during fracture opening also affected the reactivity of the fractured samples.

58 GEOSCIENCES↗

Interaction between dissolution and precipitation during olivine carbonation: Implications for CO 2 mineralization

Large-scale carbonation of olivine is considered a promising approach for in situ mineral carbonation, offering a permanent and stable method for CO 2 storage. A critical aspect of this process is understanding how dissolution and precipitation interact, as this could drive fracturing and enhance further reactions. In this study, we conducted carbonation experiments on olivine using CO 2 -saturated aqueous solutions of NaHCO 3 and NaCl. Two experimental setups were used: one representing an open geochemical system and the other a closed system, corresponding to reaction-limited and flow-limited scenarios, respectively. Further, post-reaction textural analysis using scanning electron microscopy (SEM) revealed surface coatings of reaction products in the closed system, while etch pits and etch channels were prevalent in the open system. Although no direct evidence of reaction-driven fracturing was observed, etch pits and etch channels may serve as initiation points for subcritical crack formation and growth, potentially maintaining permeability and exposing new unreacted surfaces. Using linear elastic fracture mechanics (LEFM) model, we estimate that microcracks could propagate under a pressure of 0.1 GPa if reaction products accumulate within the etch pits. Our findings offer new insights into the mechanisms governing olivine carbonation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Promotional catalytic oxidation of airborne Formaldehyde over mineral-supported MnO 2 at ambient temperature

Achieving low-level formaldehyde (HCHO) catalytic oxidation at ambient temperature under a high gas-hourly space velocity (GHSV) remains challenging. In this study, MnO 2 -based catalysts were prepared via a facile in-situ redox reaction using palygorskite (Pg), montmorillonite (MT) and diatomite (DT) as support materials. The results indicated that these minerals substantially enhanced the performance of HCHO oxidn. compared with that of commercial Al 2 O 3 at ambient temp. The as-prepared MnO 2 /PG exhibited the superior catalytic performance, where 100% removal efficiency of 1 ppm HCHO in 1500 min remained under a GHSV of 150,000 h -1 . The performance order of the as-prepared catalysts at 1500 min was MnO 2 /PG (100%) > MnO 2 /MT (87%) > MnO 2 /DT (74%) > MnO 2 /Al 2 O 3 (59%). More importantly, the MnO 2 /PG catalyst exhibited the highest CO 2 selectivity (72.1%) and excellent long-term stability after five cycles. The kinetic results for HCHO oxidn. followed the second-order kinetics. The well-distributed MnO 2 , abundant hydroxyl species, and Mn3+ and Mn4+ couples were responsible for the excellent catalytic performance of MnO 2 /PG. In addn., the incorporation of MnO 2 with PG increased the electron d. of the MnO 2 /PG surface, which was also related to the excellent performance for HCHO oxidn. A possible reaction mechanism for HCHO oxidn. was proposed based on XPS, in-situ DRIFTS and electrochem. analyses. We conclude this study paves a road for the development of MnO 2 /mineral hybrid catalysts for indoor air purifn. at ambient temp.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗