Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LOGS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Plutonium Speciation and Oxidation State Distributions in the Presence of Citrate

We explored the speciation and kinetics of the Pu(VI)-citrate and Pu(III)-citrate systems (pH m = 2.5–11.0, I = 0.1 M NaCl, T = 23 °C, O 2 (g) < 2 ppm) using ultraviolet–visible–near-infrared (UV–vis–NIR) spectrophotometry, solvent extraction, and PHREEQC modeling. Formation constants were determined for PuO 2 (HcitH)(aq) (log K° 1,1 = 1.09 ± 0.05) and PuO 2 (HcitH)(citH) 3– (log K° 1,2 = -0.20 ± 0.07), and evidence for (PuO 2 ) m (citH –k ) n (OH) x 2m(3+k)n–x was identified under alkaline conditions. Pu(VI) species were found to be less stable in the presence of citrate than in the absence of citrate (t ≤ 168 days); the rate of reduction increased with increasing pH. Further, the direct reduction of Pu(VI) to Pu(IV) was required to fit experimental data in the presence of citrate but did not improve the fit for Pu in the absence of citrate. We also observed increased Pu(III) stability in the presence of citrate (t ≤ 293 days), with higher concentrations of Pu(III) favored at lower pH. Finally, we provide evidence of a radiolysis-driven mechanism for the citrate-mediated reduction of plutonium that involves electron transfer from the oxidative breakdown of citrate. Our work highlights the need to investigate the redox effect of organic ligands on plutonium oxidation states under repository-relevant conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Identification of 4-Hydroxycumyl Alcohol As the Major MnO 2 -Mediated Bisphenol A Transformation Product and Evaluation of Its Environmental Fate

Bisphenol A (BPA), an environmental contaminant with weak estrogenic activity, resists microbial degradation under anoxic conditions but is susceptible to abiotic transformation by manganese dioxide (MnO 2 ). BPA degradation followed pseudo-first-order kinetics with a rate constant of 0.96 (±0.03) min –1 in the presence of 2 mM MnO 2 (0.017% w/w) at pH 7.2. 4-hydroxycumyl alcohol (HCA) was the major transformation product, and, on a molar basis, up to 64% of the initial amount of BPA was recovered as HCA. MnO 2 was also reactive toward HCA, albeit at 5-fold lower rates, and CO 2 evolution (i.e., mineralization) occurred. In microcosms established with freshwater sediment, HCA was rapidly biodegraded under oxic, but not anoxic conditions. With a measured octanol–water partition coefficient (Log K ow ) of 0.76 and an aqueous solubility of 2.65 g L –1 , HCA is more mobile in saturated media than BPA (Log K ow = 2.76; aqueous solubility = 0.31 g L –1 ), and therefore more likely to encounter oxic zones and undergo aerobic biodegradation. In conclusion, these findings corroborate that BPA is not inert under anoxic conditions and suggest that MnO 2 -mediated coupled abiotic–biotic processes may be relevant for controlling the fate and longevity of BPA in sediments and aquifers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Detecting Microbially Induced Calcite Precipitation in a Model Well-Bore Using Downhole Low-Field NMR

Microbially induced calcite precipitation (MICP) has been widely researched recently due to its relevance for subsurface engineering applications including sealing leakage pathways and permeability modification. These applications of MICP are inherently difficult to monitor nondestructively in time and space. Nuclear magnetic resonance (NMR) can characterize the pore size distributions, porosity, and permeability of subsurface formations. This investigation used a low-field NMR well-logging probe to monitor MICP in a sand-filled bioreactor, measuring NMR signal amplitude and T 2 relaxation over an 8 day experimental period. Following inoculation with the ureolytic bacteria, Sporosarcina pasteurii , and pulsed injections of urea and calcium substrate, the NMR measured water content in the reactor decreased to 76% of its initial value. T 2 relaxation distributions bifurcated from a single mode centered about approximately 650 ms into a fast decaying population ( T 2 less than 10 ms) and a larger population with T 2 greater than 1000 ms. The combination of changes in pore volume and surface minerology accounts for the changes in the T 2 distributions. Destructive sampling confirmed final porosity was approximately 88% of the original value. Here, these results indicate the low-field NMR well-logging probe is sensitive to the physical and chemical changes caused by MICP in a laboratory bioreactor.

54 ENVIRONMENTAL SCIENCES↗

Reining in Radium for Nuclear Medicine: Extra-Large Chelator Development for an Extra-Large Ion

Targeted α therapy (TAT) of soft-tissue cancers using the α particle-emitting radionuclide 223 Ra holds great potential because of its favorable nuclear properties, adequate availability, and established clinical use for treating metastatic prostate cancer of the bone. Despite these advantages, the use of 223 Ra has been largely overshadowed by other α emitters due to its challenging chelation chemistry. A key criterion that needs to be met for a radionuclide to be used in TAT is its stable attachment to a targeting vector via a bifunctional chelator. The low charge density of Ra 2+ arising from its large ionic radius weakens its electrostatic binding interactions with chelators, leading to insufficient complex stability in vivo. In this study, we synthesized and evaluated macropa-XL as a novel chelator for 223 Ra. It bears a large 21-crown-7 macrocyclic core and two picolinate pendent groups, which we hypothesized would effectively saturate the large coordination sphere of the Ra 2+ ion. The structural chemistry of macropa-XL was first established with the nonradioactive Ba 2+ ion using X-ray diffraction and X-ray absorption spectroscopy, which revealed the formation of an 11-coordinate complex in a rare anti pendent-arm configuration. Subsequently, the stability constant of the [Ra(macropa-XL)] complex was determined via competitive cation exchange with 223 Ra and 224 Ra radiotracers and compared with that of macropa, the current state-of-the-art chelator for Ra 2+ . A moderate log K ML value of 8.12 was measured for [Ra(macropa-XL)], which is approximately 1.5 log K units lower than the stability constant of [Ra(macropa)]. This relative decrease in Ra 2+ complex stability for macropa-XL versus macropa was further probed using density functional theory calculations. Additionally, macropa-XL was radiolabeled with 223 Ra, and the kinetic stability of the resulting complex was evaluated in human serum. Furthermore, although macropa-XL could effectively bind 223 Ra under mild conditions, the complex appeared to be unstable to transchelation. Collectively, this study sheds additional light on the chelation chemistry of the exotic Ra 2+ ion and contributes to the small, but growing, number of chelator development efforts for 223 Ra-based TAT.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Macrocyclic Chelator That Selectively Binds Ln 4+ over Ln 3+ by a Factor of 10 29

A tetravalent cerium macrocyclic complex (CeLK 4 ) was prepared with an octadentate terephthalamide ligand comprised of hard catecholate donors and characterized in the solution state by spectrophotometric titrations and electrochemistry and in the crystal by X-ray diffraction. The solution-state studies showed that L exhibits a remarkably high affinity toward Ce 4+ , with log β 110 = 61(2) and ΔG = -348 kJ/mol, compared with log β 110 = 32.02(2) for the analogous Pr 3+ complex. In addition, L exhibits an unusual preference for forming CeL 4- relative to formation of the analogous actinide complex, ThL 4- , which has β 110 = 53.7(5). The extreme stabilization of tetravalent cerium relative to its trivalent state is also evidenced by the shift of 1.91 V in the redox potential of the Ce 3+ /Ce 4+ couple of the complex (measured at -0.454 V vs SHE). The unprecedented behavior prompted an electronic structure analysis using L 3 - and M 5,4 -edge X-ray absorption near-edge structure (XANES) spectroscopies and configuration interaction calculations, which showed that 4f-orbital bonding in CeLK 4 has partial covalent character due to ligand-to-metal charge transfer (LMCT) in the ground state. The experimental results are presented in the context of earlier measurements on tetravalent cerium compounds, indicating that the amount of LMCT for CeLK 4 is similar to that observed for [Et 4 N] 2 [CeCl 6 ] and CeO 2 and significantly less than that for the organometallic sandwich compound cerocene, (C 8 H 8 ) 2 Ce. A simple model to rationalize changes in 4f orbital bonding for tri- and tetravalent lanthanide and actinide compounds is also provided.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Highly Preorganized Ligand 1,10-Phenanthroline-2,9-dicarboxylic Acid for the Selective Recovery of Uranium from Seawater in the Presence of Competing Vanadium Species

Studies of the complexation of new promising ligands with uranyl (UO 2 2+ ) and other seawater cations can aid the development of more efficient, selective, and robust sorbents for the recovery of uranium from seawater. Here, we propose that the ligand design principles based on structural preorganization can be successfully applied to obtain a dramatic enhancement in UO 2 2+ ion binding affinity and selectivity. This concept is exemplified through the investigation of the com-plexes of UO 2 2+ , VO 2+ , and VO 2+ with the highly preorganized ligand PDA (1,10-phenanthroline-2,9-dicarboxylic acid) using a combination of fluores-cence and absorbance techniques, along with den-sity functional theory (DFT) calculations. Moreover, the measured stability constant value, log K1, of 16.5 for the UO 2 2+ /PDA complex is very high compared to uranyl complexes with other dicarboxylic ligands. Moreover, PDA exhibits strong selectivity for uranyl over vanadium ions, since the determined sta-bility constant values of the PDA complexes of the vanadium ions are quite low (V(IV) log K1 = 7.4, V(V) = 7.3). Finally, the structures of the corresponding UO 2 2+ , VO 2+ , and VO 2+ complexes with PDA were identified by systematic DFT calculations, and helped to interpret the stronger binding affinity for uranium over the vanadium ions. Due to its high chemical stability, selectivity, and structural preor-ganization for UO 2 2+ complexation, PDA is a very promising candidate that can be potentially used in the development of novel adsorbent materials for the selective extraction of uranium from sea-water.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Solubility and Complexation of the Bismuthate Ion in Nitric Acid Systems

Here, the dissolution rate and solubility of NaBiO 3 have been investigated in nitric acid systems ranging from 4–6 M HNO 3 , and were found to be 58–76 µg/cm 2 ·d and 490–830 mM, respectively. The presence of 50 mM U(VI) drastically increased the solubility to 540–1200 mM, while rates of dissolu-tion were relatively unchanged. The solubility of NaBiO 3 increased with an increase in U(VI) con-centrations at 4 M HNO 3 , with log-log analysis indicating a one-to-one complex between Bi and U and IR spectroscopic evidence monitoring uranyl stretching suggesting complex formation. Absorb-ance spectra were obtained experimentally and computationally with an absorbance band in the range of 450–600 nm that has been attributed to Bi(V). The ingrowth and decay of Bi(V) in solution was also studied as a function of mass of solid NaBiO 3 present, acidity, and temperature. The ac-tivation energies of dissolution and decomposition were calculated to be 39 ± 4 and 61 ± 6 kJ/mol, re-spectively. Furthermore, these results indicate that dissolution of NaBiO 3 into the respective Na + and BiO 3 – is occur-ring prior to undergoing reduction, a process which conventionally has been believed to occur in the reverse order.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Hygroscopicity of organic compounds as a function of carbon chain length, carboxyl, hydroperoxy, and carbonyl functional groups

The albedo and microphysical properties of clouds are controlled in part by the hygroscopicity of particles serving as cloud condensation nuclei (CCN). Hygroscopicity of complex organic mixtures in the atmosphere varies widely and remains challenging to predict. Here we present new measurements characterizing the CCN activity of pure compounds in which carbon chain length and the number of hydroperoxy, carboxyl, and carbonyl functional groups were systematically varied to establish the contributions of these groups to organic aerosol apparent hygroscopicity. Apparent hygroscopicity decreased with carbon chain length and increased with polar functional groups in the order carboxyl > hydroperoxy > carbonyl. Activation diameters at different supersaturations deviated from the -3/2 slope in log-log space predicted by Köhler theory, suggesting that water solubility limits CCN activity of particles composed of weakly functionalized organic compounds. Results are compared to a functional group contribution model that predicts CCN activity of organic compounds. The model performed well for most compounds but under-predicted the CCN activity of hydroperoxy groups. New best-fit hydroperoxy group/water interaction parameters were derived from the available CCN data. Lastly, these results may help improve estimates of the CCN activity of ambient organic aerosols from composition data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interactions of Tc(IV) with humic substances

To understand the key processes affecting 99Tc mobility in the subsurface and help with the remediation of contaminated sites, the binding constants of several humic substances (humic and fulvic acids) with Tc(IV) were determined, using a solvent extraction technique. The novelty of this paper lies in the determination of the binding constants of the complexes formed with the individual species TcO(OH)+ and TcO(OH)20. Binding constants were found to be 6.8 and between 3.9 and 4.3, for log 1, 1,1 and log 1,-2,1, respectively; these values were little modified by a change of ionic strength, in most cases, between 0.1 M to 1.0 M, nor were they by the nature and origin of the humic substances. Modeling calculations based on these show TcO(OH)-HA to be the predominant complex in a system containing 20 ppm HA and in the 4-6 pH range, while TcO(OH)20 and TcO(OH)2-HA are the major species, in the pH 6-8 range.

Technetium organic matter complexation Solvent Ext↗

A Mesopore-Confined and Graphene Oxide-Localized Ruthenium Catalyst Increases Rates of Mid-Chain Polyolefin Hydrogenolysis

A catalyst architecture with mesoporous silica coating Ru nanoparticles on reduced graphene oxide (mSiO 2 /Ru/rGO) localizes the 2 nm Ru solely at the closed bottoms of 2.9 nm diameter mesopores. mSiO 2 /Ru/rGO catalyzes the rapid, selective hydrogenolysis of polyolefins at wax formation rates (ν wax ) up to 1700 g wax ·g Ru –1 ·h –1 and a turnover frequency (TOF) for C–C bond cleavage of 130 ± 8 min –1 . The ν wax and TOF for mSiO 2 /Ru/rGO are 23× and 16× those of nonporous Ru/rGO, respectively, indicating that faster chain cleavage is also more selective inside mesopores. The methane yield from mSiO 2 /Ru/rGO is ca. 30% of the value obtained from Ru/rGO. Methane decreases, and wax selectivity improves with narrow-pore (2.3 nm) mSiO 2 /Ru/rGO. The reaction rate decreases at lower and higher H 2 pressures from its maximum at 37 bar. Log(TOF)-log(P H2 ) plots reveal rates ∝ [P H2 ] 2.8 or [P H2 ] −2.0 in the lower or higher pressure ranges, respectively. Corresponding plots for Ru/C give rates ∝ [P H2 ] 1 or [P H2 ] −2.4 . Ru is hydrocarbon-covered at low pressure; thus, the higher H 2 order for mSiO 2 /Ru/rGO indicates that mesopores increase the density of cleavable unsaturated moieties on the Ru surface. The lower H 2 order on Ru/C implies a lower density of cleavable groups because saturated segments occupy a larger fraction of the Ru surface. Higher surface occupancy by the hydrocarbon reactant correlates with more methane formation. Therefore, pore confinement, narrower pore diameter in mSiO 2 /Ru/rGO, or higher H 2 pressure leads to lower methane yields. Ru nanoparticles in mSiO 2 /Ru/rGO maintain equivalent activity and selectivity over five recycling tests.

Catalysts↗

Evolution of Structure-Reactivity Correlations for the Hydrogen Abstraction Reaction by Chlorine Atom

Empirical structure-reactivity correlations are developed for log k298, the gas-phase rate constants for the reaction (Cl + HCR3 ClH + CR3 ). It has long been recognized that correlation with rH is weak. The poor performance of the linear Evans-Polanyi formulation s illustrated and was little improved by adding a quadratic term, e.g., by making its slope smoothly dependent on rH [ ( rH rHmin) / ( rHmax rHmin)]. The polar effect ( -Cl---H---CR3 +) has also been long discussed but there is no formalization of this dependence based on widely available independent variable(s). Using the sum of Hammett constants for the R substituents also gave at best modest correlations, either for para or for its dissection into F (field/inductive) and R (resonance) effects. Much greater success was achieved by combining these approaches with the preferred independent variable set being either [( rH)2, rH, F, and R] or [ , rH, F, and R]. For 64 rate constants which span 7 orders of magnitude, these correlation formulations give r2 > 0.87 and a mean unsigned deviation of <0.5 log k units, with even better performance if primary secondary, and tertiary reaction centers are treated separately.

chlorine atom↗

Resolution of a Challenge for Solvation Modeling: Calculation of Dicarboxylic Acid Dissociation Constants Using Mixed Discrete-Continuum Solvation Models

First and second dissociation constants (pK a values) of oxalic acid, malonic acid, and adipic acid were computed by using a number of theoretical protocols based on density functional theory and using both continuum solvation models and mixed discrete-continuum solvation models. We show that fully implicit solvation models (in which the entire solvent is represented by a dielectric continuum) fail badly for dicarboxylic acids with mean unsigned errors averaged over six pK a values) of 2.4-9.0 log units, depending on the particular implicit model used. The use of water-solute clusters and accounting for multiple conformations in solution significantly improve the performance of both generalized Born solvation models and models that solve the nonhomogeneous dielectric Poisson equation for bulk electrostatics. The four most successful models have mean unsigned errors of only 0.6-0.8 log units.

Environmental Molecular Sciences Laboratory↗

Cloud-Scale Droplet Number Sensitivity to Liquid Water Path in Marine Stratocumulus

Cloud droplet number concentration (N c ) is retrieved from remotely observed marine stratocumulus cloud liquid water path (LWP), cloud optical depth (τ c ), and cloud thickness, using an optical model that assumes liquid water content (LWC) increases linearly from cloud base. Assuming that LWC is vertically uniform would underestimate τ c by 5% and N c by 14%. Individual retrievals of N c from 10-min averages vary by orders of magnitude from long-term averages. Surface cloud condensation nuclei (CCN) number concentration N CCN is weakly but significantly correlated with N c (R = 0.3) for the day leading and 6 hr following N c . Consistent with coalescence and drizzle scavenging cloud droplets, lag correlations show that N c decreases for 1 hr after the peak area-average rain rate. Greater observed LWP for lower N c [d(log N c )/d(log LWP) = 2.3] is consistent with enhanced entrainment drying of clouds with greater N c and consistent with removal of N c by thicker clouds with more coalescence and drizzle. Stronger precipitation in clouds with greater N c is the opposite sensitivity as expected were LWP to be controlled by the “cloud lifetime” indirect aerosol effect. The strong sensitivity of N c to LWP suggests that cloud dynamic and thermodynamic forcings drive macrophysical variability that controls N c in southeastern tropical Pacific stratocumulus clouds. Regressions are relatively insensitive to assumptions about the covariance of errors among the sensors.

54 ENVIRONMENTAL SCIENCES↗

Creep Deformation in Vaca Muerta Shale From Nanoindentation to Triaxial Experiments

In this work, we tested samples cored from the Vaca Muerta shale reservoir using nanoindentation (2 min) and triaxial (12 hr) creep experiments in which confining pressure and differential stresses were <40 MPa. In all cases, we observed transient creep wherein strain increased as the logarithm of time. Creep was always compactional, led to increased moduli, was triggered by changes in either hydrostatic or deviatoric stress, and occurred under loads well below the failure stress. Our results are consistent with yield cap models proposed to describe shear-enhanced compaction of sandstones and carbonates, assuming that the yield surface depends on strain rate. We compared our results to earlier studies that observed the transition from transient creep to approximately constant strain rate behavior. If short-term creep can be quantified by a creep modulus, $C$, and long-term creep, after a transition time, $t_c$, by a linear viscosity, $η$, then $η = Ct_c$. Owing to heterogeneity, the local values of Young's and creep moduli, E and C, measured during nanoindentation, varied by several orders of magnitude. Simple averaging of the indentation results overestimated E and C, as compared to their triaxial counterparts. The kinetics of log time creep, which is seen in various materials and loading circumstances, has been represented by a simple conceptual model incorporating the interplay of viscoelastic elements with widely distributed characteristic times. Thus, we argue that log time creep is an emerging phenomenon, independent of the identities of the underlying physical mechanisms.

58 GEOSCIENCES↗

The Effect of Brine on the Electrical Properties of Methane Hydrate

Gas hydrates possess lower electrical conductivity (inverse of resistivity) than either seawater or ice, but higher than clastic silts and sands, such that electromagnetic methods can be employed to help identify their natural formation in marine and permafrost environments. Controlled laboratory studies offer a means to isolate and quantify the effects of changing individual components within gas-hydrate-bearing systems, in turn yielding insight into the behavior of natural systems. Here we investigate the electrical properties of polycrystalline methane hydrate with ≥25% gas-filled porosity and in mixture with brine. Initially, pure methane hydrate was synthesized from H2O ice and CH4 gas while undergoing electrical impedance measurement, then partially dissociated to assess the effects of pure pore water accumulation on electrical conductivity. Methane hydrate + brine mixtures were then formed by either adding NaCl (0.25–2.5 wt %) to high-purity ice or by using frozen seawater as a reactant. Conductivity was obtained from impedance measurements made in situ throughout synthesis while temperature cycled between +15 °C and -25 °C. Several possible conduction mechanisms were subsequently determined using equivalent circuit modeling. Samples with low NaCl concentration show a doping/impurity effect and a log linear conductivity response as a function of temperature. For higher salt content samples, conductivity increases exponentially with temperature and the log linear relationship no longer holds; instead, we observe phase changes within the samples that follow NaCl–H 2 O–CH 4 phase equilibrium predictions. Final samples were quenched in liquid nitrogen and imaged by cryogenic scanning electron microscopy (cryo-SEM) to assess grain-scale characteristics.

58 GEOSCIENCES↗

Physical Properties and Gas Hydrate at a Near-Seafloor Thrust Fault, Hikurangi Margin, New Zealand

The Papaku Fault Zone, drilled at International Ocean Discovery Program (IODP) Site U1518, is an active splay fault in the frontal accretionary wedge of the Hikurangi Margin. In logging-while-drilling data, the 33-m-thick fault zone exhibits mixed modes of deformation associated with a trend of downward decreasing density, P-wave velocity, and resistivity. Methane hydrate is observed from ~30 to 585 m below seafloor (mbsf), including within and surrounding the fault zone. Hydrate accumulations are vertically discontinuous and occur throughout the entire logged section at low to moderate saturation in silty and sandy centimeter-thick layers. In this paper, we argue that the hydrate distribution implies that the methane is not sourced from fluid flow along the fault but instead by local diffusion. This, combined with geophysical observations and geochemical measurements from Site U1518, suggests that the fault is not a focused migration pathway for deeply sourced fluids and that the near-seafloor Papaku Fault Zone has little to no active fluid flow.

58 GEOSCIENCES↗

Linking Stream Chemistry to Subsurface Redox Architecture

As drinking-water scarcity grows worldwide, we need to improve predictions of the quantity and quality of our water resources. An overarching problem for model improvement is that we do not know the geological structure of aquifers in sufficient detail. In this work, we demonstrate that mineral-water reactions imprint structure in the subsurface that impacts the flow and transport of some chemical species. Specifically, pyrite, a ubiquitous mineral, commonly oxidizes and depletes in the upper layers of the weathering profile in most humid watersheds, only remaining at depths of meters. We hypothesize that variations in concentrations (C) of pyrite-derived sulfate released into rivers as a function of discharge (q) reflect the rate-limiting step and depth of pyrite-oxidizing layers. We found that log C - log q behaviors thus differ in small and large watersheds in the Susquehanna River Basin as well as in selected watersheds in the Western United States. Although coal mining changes pyrite oxidation from closed to open system with respect to O 2 , patterns in stream chemistry as a function of discharge are consistent with deep and shallow pyrite oxidation zones in small and large watersheds respectively. Therefore, understanding the subsurface patterns of mineral reactions and how they affect the architecture of aquifers will elucidate patterns of changing river chemistry and our ability to manage water resources in the future under accelerated land use and climate change.

54 ENVIRONMENTAL SCIENCES↗