Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INTERFEROMETER SYSTEM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

A CHARA ARRAY SURVEY OF CIRCUMSTELLAR DISKS AROUND NEARBY Be-TYPE STARS

We report on a high angular resolution survey of circumstellar disks around 24 northern sky Be stars. The K-band continuum survey was made using the CHARA Array long baseline interferometer (baselines of 30-331 m). The interferometric visibilities were corrected for the flux contribution of stellar companions in those cases where the Be star is a member of a known binary or multiple system. For those targets with good (u, v) coverage, we used a four-parameter Gaussian elliptical disk model to fit the visibilities and to determine the axial ratio, position angle, K-band photospheric flux contribution, and angular diameter of the disk's major axis. For the other targets with relatively limited (u, v) coverage, we constrained the axial ratio, inclination angle, and/or disk position angle where necessary in order to resolve the degeneracy between possible model solutions. We also made fits of the ultraviolet and infrared spectral energy distributions (SEDs) to estimate the stellar angular diameter and infrared flux excess of each target. The mean ratio of the disk diameter (measured in K-band emission) to stellar diameter (from SED modeling) is 4.4 among the 14 cases where we reliably resolved the disk emission, a value which is generally lower than the disk size ratio measured in the higher opacity H{alpha} emission line. We estimated the equatorial rotational velocity from the projected rotational velocity and disk inclination for 12 stars, and most of these stars rotate close to or at the critical rotational velocity.

79 ASTRONOMY AND ASTROPHYSICS↗

DESIGN AND TEST OF AN INSTRUMENT FOR MEASURING MICROTHERMAL SEEING ON THE MAGDALENA RIDGE

We have constructed and operated an automated instrument for measuring ground-level microthermal seeing at the Magdalena Ridge Observatory (MRO). The MRO is located at an altitude of 10500' in the Cibola National Forest in New Mexico, USA. It is the planned site for the MRO Optical Interferometer (MROI) planned for up to 10 collecting elements, each with a diameter of 1.4 m, and baselines eventually up to approximately 400 m. As part of the preparation for construction we deployed a system to characterize the ground-level seeing across the observatory site. The instrument is built largely of off-the-shelf components, with only the sensor head and power supply requiring electronic board assembly. Even in those cases the board architecture is very simple. The first proof-of-concept system was deployed for several weeks in the autumn of 2004, and has since undergone several iterations. The latest configuration operates entirely off batteries, incorporates wireless data acquisition, and is thus able to operate in an area with no shelter, power, or communications. In this paper we present the design of the instrument, and show initial data. The microthermal tower has four sensor pairs at heights from 0.8 to 4.41 m, significantly lower than other microthermal experiments, because of the need to characterize the seeing near the ground. We find significant variation in the contribution of this range of heights to the seeing, contributing up to 0.''3 of the seeing at some times and only 0.''02 at other times. The individual sensor power spectra have a slope in the range of 1.4--1.5, which is lower than the 1.67 slope predicted by Kolmogorov turbulence theory. We measure the well known effect of improved seeing immediately around sunset. While we find significant variation in the microthermal seeing, we did not find a pattern of corresponding variations in weather conditions, suggesting that a complicated set of factors control microthermal turbulence.

79 ASTRONOMY AND ASTROPHYSICS↗

To Boldly Go: America's Next Era in Space. Living Places in Other Solar Systems

Dr. Sargent noted that evidence of other solar systems that might sustain life, particularly human life, is being sought. Protoplanetary (or debris) disks have been observed and are considered evidence that other solar systems exist or are being formed. Also observed is a wobble which is seen as evidence of circulation around a celestial body and gaps that are created by the potential planet. One indicator of life may be these rings or disks of debris around stars. Interferometers, which are telescopic devices that consist of multiple lenses, are being developed in order to better see celestial objects and what may be found around them. Other methods for improving celestial viewing capabilities are also under development. She spoke of particularly looking for wobble and gaps and debris disks where new planets are being formed in an effort to discover another planet that might sustain life as we know it. The next speaker, Dr. Chris McKay, is a planetary scientist at NASA Ames. He talked about the possibility of life on Mars or in some other solar system. He commented on the sameness of the origin of all life, and of the origin of, and the need for, oxygen and water. He believes that water originally came to Earth from comets. At least that is a viable possible source. Water might also have come to Earth via asteroids. Dr. McKay also postulates that there can be no water on Mars because Mars has no plate tectonic system, which he believes is an essential for recycling water. . Dr. Wes Huntress, NASA s Associate Administrator for Space Science, and Dr. Barbara Stone, also from NASA Headquarters, joined Drs. Cordova, Sargent and McKay in the question and answer period following the presentations. (Mr. Goldin was excused to keep an appointment with the President.) The discussion included the following statements and questions: The more missions that there are, the more technology is developed. We need to study our solar system to have something to which we can compare other systems. Before we send people to distant places or to other planets, we need to study the psychological and biological problems that are created by going away from Earth for a long period of time. Pulsars appear to have planets rotating around them. This is of interest and should be studied further. Looking back in time, is there any thought to seeing the development of life? How long did it take for oxygen to rise on the Earth? Do debris disks around the stars provide velocity patterns? To detect life scientists are listening for radio signals, looking for oxygen or ozone, and looking for liquid water. On Earth liquid water is the defining ecological parameter for life. This means that operationally the search for life elsewhere is primarily a search for liquid water.

Source record↗

Early Results from the Odyssey THEMIS Investigation

The Thermal Emission Imaging System (THEMIS) began studying the surface and atmosphere of Mars in February, 2002 using thermal infrared (IR) multi-spectral imaging between 6.5 and 15 m, and visible/near-IR images from 450 to 850 nm. The infrared observations continue a long series of spacecraft observations of Mars, including the Mariner 6/7 Infrared Spectrometer, the Mariner 9 Infrared Interferometer Spectrometer (IRIS), the Viking Infrared Thermal Mapper (IRTM) investigations, the Phobos Termoscan, and the Mars Global Surveyor Thermal Emission Spectrometer (MGS TES). The THEMIS investigation's specific objectives are to: (1) determine the mineralogy of localized deposits associated with hydrothermal or sub-aqueous environments, and to identify future landing sites likely to represent these environments; (2) search for thermal anomalies associated with active sub-surface hydrothermal systems; (3) study small-scale geologic processes and landing site characteristics using morphologic and thermophysical properties; (4) investigate polar cap processes at all seasons; and (5) provide a high spatial resolution link to the global hyperspectral mineral mapping from the TES investigation. THEMIS provides substantially higher spatial resolution IR multi-spectral images to complement TES hyperspectral (143-band) global mapping, and regional visible imaging at scales intermediate between the Viking and MGS cameras.

Christensen, Philip R.↗

Microwave absorption of oxygen measured with a Fabry-Perot spectrometer

A semiconfocal configuration of a Fabry-Perot interferometer is described, which can be used for measuring moderately weak absorption at a fixed microwave frequency as a function of pressure by measuring the change in the Q of the system when the gas is introduced. An accuracy of 0.3 dB/km at 58.82 GHz is achieved with just conventional laboratory equipment. The absorption need not be resonant, and can be determined as a function of such physical factors as pressure, temperature, and mixture composition. Oxygen absorption measurements support calculations based on theories of line overlap inside the oxygen absorption band at subatmospheric pressure.

Poon, R. K. L.↗

The Space Infrared Interferometric Telescope (SPIRIT)

The far-infrared astrophysics community is eager to follow up Spitzer and Herschel observations with sensitive, high-resolution imaging and spectroscopy, for such measurements are needed to understand merger-driven star formation and chemical enrichment in galaxies, star and planetary system formation, and the development and prevalence of water-bearing planets. The Space Infrared Interferometric Telescope (SPIRIT) is a wide field-of-view space-based spatio-spectral interferometer designed to operate in the 25 to 400 micron wavelength range. This talk will summarize the SPIRIT mission concept, with a focus on the science that motivates it and the technology that enables it. Without mentioning SPIRIT by name, the astrophysics community through the NASA Astrophysics Roadmap Committee recently recommended this mission as the first in a series of space-based interferometers. Data from a laboratory testbed interferometer will be used to illustrate how the spatio-spectral interferometry technique works.

Leisawitz, David T.↗

Technology plan for the Terrestrial Planet Finder coronagraph

The Terrestrial Planet Finder (TPF) is envisaged as a series of two space observatories: an 8-m class optical coronagraph, to be launched around 2016; and a mid-infrared formation-flying interferometer, to be launched sometime prior to 2020. The goal of these missions, broadly stated, is to understand the formation and evolution of planets and, ultimately, of life byond our Solar System. In support of this goal, the TPF missions will be capable of (1) searching for and detecting terrestrial planets should they eixst in the habitable zones of nearby stars, (2)characterizing the atmosphere of planets they detect and searching for indicators of the presence of life, (3) undtertaking a program of comparative study of the constituents of planetary systems, and (4) enabling a broad program of general astrophysics. This document details the technology plan for the first of the TPF missions, the Terrestrial Planet Finder Coronagraph (TPF-C).

Lawson, Peter R.↗

Toward Improving the Assimilation of IASI and CrIS Radiances Over Land Into the NASA GEOS: LST Inversion and Validation

Assimilating surface-sensitive radiances over land is still challenging for both infrared (IR) and microwave (WV) essentially because of the large uncertainties of the land physical surface emissivity model used in the CRTM and the uncertainties of land surface state properties. Currently very few IR radiances are assimilated over land in the NASA Goddard Earth Observing System (GEOS). Large number of radiances are rejected by the emissivity sensitivity check as well as the Cloud detection check. This study focuses on enhancing the assimilation of Infrared Atmospheric Sounding Interferometer (IASI) and Cross-track Infrared Sounder (CrIS) over land in the GEOS forecasting and data assimilation framework. To reach this goal, the Land surface Temperature (LST) is first inverted using IR radiances from IASI and CrIS selected channels to use it as surface boundary parameter for the assimilation of the rest of IASI and CrIS surface-sensitive channels. This work will present a full assessment of the quality of this LST by comparing it and its spatio-temporal variability to LST predicted by the GEOS model. The impacts on the quality of the resulting analysis and subsequent forecast will also be discussed.

Niama Boukachaba↗

The Fizeau Interferometer Testbed

The Fizeau Interferometer Testbed (FIT) is a collaborative effort between NASA's Goddard Space Flight Center, the Naval Research Laboratory, Sigma Space Corporation, and the University of Maryland. The testbed will be used to explore the principles of and the requirements for the full, as well as the pathfinder, Stellar Imager mission concept. It has a long term goal of demonstrating closed-loop control of a sparse array of numerous articulated mirrors to keep optical beams in phase and optimize interferometric synthesis imaging. In this paper we present the optical and data acquisition system design of the testbed, and discuss the wavefront sensing and control algorithms to be used. Currently we have completed the initial design and hardware procurement for the FIT. The assembly and testing of the Testbed will be underway at Goddard's Instrument Development Lab in the coming months.

OPTICS DESIGN↗

Laser Metrology in the Micro-Arcsecond Metrology Testbed

The Space Interferometer Mission (SIM), scheduled for launch in 2009, is a space-born visible light stellar interferometer capable of micro-arcsecond-level astrometry. The Micro-Arcsecond Metrology testbed (MAM) is the ground-based testbed that incorporates all the functionalities of SIM minus the telescope, for mission-enabling technology development and verification. MAM employs a laser heterodyne metrology system using the Sub-Aperture Vertex-to-Vertex (SAVV) concept. In this paper, we describe the development and modification of the SAVV metrology launchers and the metrology instrument electronics, precision alignments and pointing control, locating cyclic error sources in the MAM testbed and methods to mitigate the cyclic errors, as well as the performance under the MAM performance metrics.

interferometry↗

Investigation of helicon ion source extraction systems

Various versions of an extraction system for a helicon ion source have been investigated in high plasma density (>10{sup 12} cm{sup -3}) modes. The measurements of the plasma density were carried out with a microwave interferometer. Experiments were performed with hydrogen and helium gases. The preliminary results indicate that specially designed extractors are very promising for improving ion beam paraxial brightness.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Experimental characterization of quantum correlated triple beams generated by cascaded four-wave mixing processes

Quantum correlations and entanglement shared among multiple modes are fundamental ingredients of most continuous-variable quantum technologies. Recently, a method used to generate multiple quantum correlated beams using cascaded four-wave mixing (FWM) processes was theoretically proposed and experimentally realized by our group [Z. Qin et al., Phys. Rev. Lett. 113, 023602 (2014)]. Our study of triple-beam quantum correlation paves the way to showing the tripartite entanglement in our system. Our system also promises to find applications in quantum information and precision measurement such as the controlled quantum communications, the generation of multiple quantum correlated images, and the realization of a multiport nonlinear interferometer. For its applications, the degree of quantum correlation is a crucial figure of merit. In this letter, we experimentally study how various parameters, such as the cell temperatures, one-photon, and two-photon detunings, influence the degree of quantum correlation between the triple beams generated from the cascaded two-FWM configuration.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High spectral resolution lidar to measure optical scattering properties of atmospheric aerosols. II - Calibration and data analysis

The high spectral resolution lidar (HSRL) measures optical properties of atmospheric aerosols by interferometically separating the elastic aerosol backscatter from the Doppler broadened molecular contribution. Calibration and data analysis procedures developed for the HSRL are described. Data obtained during flight evaluation testing of the HSRL system are presented with estimates of uncertainties due to instrument calibration. HSRL measurements of the aerosol scattering cross section are compared with in situ integrating nephelometer measurements.

Sroga, J. T.↗

The orbit of Alpha Equulei measured with long-baseline optical interferometry - Component masses, spectral types, and evolutionary state

The apparent orbit of the double-lined spectroscopic binary Alpha Equulei was measured using observations, from June 13, 1989 to September 15, 1990, with the Mark III Optical Interferometer. The results, combined with the spectroscopic results of Rosvick and Scarfe (1991), were used to obtain estimates of the masses of the components, their absolute magnitudes, and the distance to the system. In addition, the magnitude differences between the components were determined at four wavelengths; these were combined with the colors reported by Stickland (1976) to derive colors for the two Alpha Equulei components and to estimate their spectral types.

Armstrong, J. T.↗

Active impedance matching of complex structural systems

Viewgraphs on active impedance matching of complex structural systems are presented. Topics covered include: traveling wave model; dereverberated mobility model; computation of dereverberated mobility; control problem: optimal impedance matching; H2 optimal solution; statistical energy analysis (SEA) solution; experimental transfer functions; interferometer actuator and sensor locations; active strut configurations; power dual variables; dereverberation of complex structure; dereverberated transfer function; compensators; and relative power flow.

Macmartin, Douglas G.↗

Improvements to Ozone Analyses using Hyperspectral Sounders in the 9.6 μm Band

Previously, hyperspectral sounder brightness temperatures assimilated in the Goddard Earth Observing System Atmospheric Data Assimilation System (GEOS-ADAS) were limited to assimilating temperature and moisture. The ozone sensitive 9.6 m region is sensed by several hyperspectral sounders including AIRS (Atmospheric InfraRed Sounder), IASI (Infrared Atmospheric Sounding Interferometer), and CrIS (Cross-track Infrared Sounder). Direct assimilation of brightness temperatures in the 9.6 m region have been operational at ECMWF for several years (Dragani and McNally, 2013; Eresmaa et al., 2017). With this study, similar improvements using the GEOS-ADAS are presented. Channels were selected from available operational subsets evaluating information content and minimizing inter-channel correlation. Additionally, information such as channel selections made by other studies, and vertical sensitivities of ozone and temperature were considered in developing the study. The analyses produced show improvements verified against ozonesondes taken from SHADOZ (Southern Hemisphere Additional Ozonesondes). It is anticipated that inclusion of these ozone sensitive channels will be used to improve NASA GMAO products in the near future.

GEOS-ADAS↗

Improvements to Ozone Analyses Using Hyperspectral Sounders in the 9.6 μm Band

Previously, hyperspectral sounder brightness temperatures assimilated in the Goddard Earth Observing System Atmospheric Data Assimilation System (GEOS-ADAS) were limited to assimilating temperature and moisture. The ozone sensitive 9.6 m region is sensed by several hyperspectral sounders including AIRS (Atmospheric InfraRed Sounder), IASI (Infrared Atmospheric Sounding Interferometer), and CrIS (Cross-track Infrared Sounder). Direct assimilation of brightness temperatures in the 9.6 m region have been operational at ECMWF for several years (Dragani and McNally, 2013; Eresmaa et al., 2017). With this study, similar improvements using the GEOS-ADAS are presented. Channels were selected from available operational subsets evaluating information content and minimizing inter-channel correlation. Additionally, information such as channel selections made by other studies, and vertical sensitivities of ozone and temperature were considered in developing the study. The analyses produced show improvements verified against ozonesondes taken from SHADOZ (Southern Hemisphere Additional Ozonesondes), and WOUDC (World Ozone and Ultraviolet Data Center). Inclusion of inter-channel correlation error to the selected ozone channels are expected to improve ozone analyses further along with improve analyses overall. It is anticipated that inclusion of these ozone sensitive channels will be used to improve NASA GMAO products in the near future.

GEOS-ADAS↗