Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IMPURITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

The radiated power limit in impurity seeded JET-ILW plasmas

The total radiated fraction is examined in high density H-mode plasmas (Greenwald fraction of about 85 %) in JET by the variation of the auxiliary heating power of Pheat = 14 MW-29 MW. An achieved radiation fraction of about 75 % at most has been observed in JET-ILW, which is less than the highest achievable (≈90 %) fraction in JET-C during the high radiative power scenarios with N2 seeding. It is shown that the maximal achievable total radiation fraction averaged over ELM cycles has a strong dependence on the radiation efficiency of the ELM energy, $θ_{rad}$: $\gamma^{max}_{rad,total}$ = 1 -$\frac {f_{ELM} x ΔW_{ELM}} {P_heat}$ (1- $θ_{rad}$). About 50 % and 16 % of the ELM induced diamagnetic energy drop (ΔW ELM ) radiates during the ELM in JET-C and JET-ILW, respectively, which corresponds to the maximum total radiated powers of $\gamma^{max}_{rad,JET-C}$ = 0.87 and $\gamma^{max}_{rad,JET-ILW}$ = 0.77. These values of the maximum of the radiative power fractions are in good agreement with $\gamma^{max}_{rad}$ experimentally observed in JET-C (90 %) and JET-ILW (75 %).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Temperature screening and cross-field impurity accumulation from a thermodynamic perspective

In a variety of different systems, high-Z ion species show a marked tendency to accumulate in regions of high plasma density. It has previously been suggested that the apparent universality of this behavior could be explained thermodynamically, in terms of the maximum-entropy state attainable when the system must obey an ambipolarity condition. Furthermore, the previous treatment did not allow for the possibility of temperature gradients. Here, tools from non-equilibrium (Onsager) thermodynamics are used to show that ambipolarity continues to play a key role in producing this behavior in the presence of temperature gradients, and to recover well-known temperature screening effects that appear in these cases.

79 ASTRONOMY AND ASTROPHYSICS↗

Hydrogen impurities and shallow donors in SnO2 studied by infrared spectroscopy

Hydrogen has been found to be an important source of n-type conductivity in the transparent conducting oxide SnO2. We have studied the properties of H in SnO2 single crystals with infrared spectroscopy. When H or D is introduced into SnO2 by annealing in an H2 or D2 ambient at elevated temperature, several O-H and O-D vibrational lines are produced along with the low-frequency absorption that is characteristic of free carriers. To probe the relationship between H and the free carriers it introduces, the thermal stability of the free carrier absorption, and its relationship to the thermal stabilities of the O-H lines have been examined. Two H-related donors are found, one that is stable at room temperature on a time scale of weeks and a second that is stable up to 600 C. These electrically active defects are found to interact with other O-H centers and can be converted from one to another by thermal treatments. The vibrational modes have been found to have distinctive polarization properties that provide an important test of microscopic defect models for the several O-H and (O-H)2 centers that we have observed.

08 HYDROGEN↗

2D HSQC Chemical Shifts of Impurities from Biomass Pretreatment

Two dimensional (2D) heteronuclear single quantum coherence (HSQC) nuclear magnetic resonance (NMR) is a powerful analytical method which can be used to elucidate the structure of biomass. During processing, biomass is typically subjected to some form of chemical treatment which can be performed with a variety of compounds. The presence of these compounds, even in trace amounts, has the potential to contaminate the sample and lead to misinterpretation of the HSQC spectra. Here we report the chemical shifts of 29 compounds commonly used in biomass processing which have the potential to contaminate the biomass samples and lead to the misinterpretation of peaks associated with biomass (Populus trichocarpa ) pretreated via autohydrolysis. The identification of these chemical shifts could serve as a valuable tool in preventing errors in characterizing biomass via HSQC.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Lowering the Spectral Detection Threshold for Molecular Impurities in Gas Mixtures by Interference Multiplexing

We consider the most feasible ways to significantly improve the sensitivity of spectroscopic methods for detection and measurement of trace concentrations of greenhouse gas molecules in the atmosphere. The proposed methods are based on combining light fluxes from a number of spectral components of the specified molecule on the same photodetector, taking into account the characteristic features of the transmission spectrum of devices utilizing multipath interference effects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Applying Improved Optical Recognition with Machine Learning on Sorting Cu Impurities in Steel Scrap

Annually, 20–55 million tons of electronic waste (e-waste) is produced worldwide (5% of all municipal solid waste). Although e-waste embodies only 2% of America’s municipal waste, it accounts for a significantly larger proportion of the heavy metals and flame retardants present in the waste stream. Currently, less than 20% of all e-waste is recycled in the United States because the heterogeneity of the feedstock limits the opportunity for reuse in high value products and processing of the waste itself is often too costly to justify handling. To address this concern, the aims of this study are: 1) to identify the major plastic and metal compositions within electronic shredder residue (ESR), 2) to formulate solvents and processing conditions to separate 90% of the plastics targeted from consumer shred ESR, and 3) to develop a process design model to estimate the cost and energy efficiency of the proposed solvent-based processing. In this study, a pre-sorted heterogeneous ESR feedstock (one where aluminum, magnetic components, and hazardous battery materials removed by an e-waste recycling facility) was used, with the major compositions of the ESR characterized. It was found that 25 wt.% of the feedstock was composed of plastics, 6 wt.% rubber, 27 wt.% printed circuit boards, 23% wire, and the remainder metals and capacitors. Within the plastic portion, polystyrene (PS, 40 wt.%), acrylonitrile butadiene styrene (ABS, 25 wt.%), and styrene-acrylonitrile (SAN, 9wt.%) were identified to compose the majority of the screened plastics using Fourier transform infrared spectroscopy (FTIR). Next, selective solvents were screened using Hansen Solubility Parameter Theory (HSP) for dissolving PS and ABS. The pre-screening results show that methylene chloride (dichloromethane, DCM) and tetrahydrofuran (THF) are capable of dissolving the most PS and ABS, while methanol (MeOH) and ethylene glycol (EG) are capable of precipitating the most PS and ABS. These solvents were subsequently used to recover polymers and remove. flame retardants within the ESR feedstock. By optimizing the dissolution time and the solvents used, the highest polymer dissolution yield (99 wt.%%) was achieved using DCM for 48 hr. Both pre-screened anti-solvents (MeOH and EG) showed the highest polymer precipitation yield (71 wt.%). In terms of flame retardant removal rate, EG was found to have a high phosphorus-containing flame retardant removal rate (up to 98%). Characterization shows that the proposed solvent-based processing can preserve a high molecular weight fraction of the polymers and effectively remove flame retardants. Cost analysis indicates that the amount of the solvent/anti-solvent recovered after the reaction would play a critical role in reducing the operating costs. The energy analysis shows that the proposed solvent-based processes can save up to 60% of the embodied energy used to manufacture plastics used in electronics (PS and ABS were used for calculations). The results from this project prove the potential of solvent-based processing to produce secondary materials (plastics and metals) from e-waste for cross-industry reuse.

36 MATERIALS SCIENCE↗

Nitrogen-doped carbon for selective pseudo-metal-free hydrodeoxygenation of 5-hydroxymethylfurfural to 2,5-dimethylfuran: Importance of trace iron impurity

Heteroatoms-doped carbon materials have recently emerged as effective catalysts for various chemical and electrochemical reactions. The free of metals especially noble metals reduces cost and eliminates issues like sintering or leaching of metals at elevated temperatures in solvents. In this work, selective hydrodeoxygenation (HDO) of 5-hydroxymethylfurfural (HMF) to 2,5-dimethylfuran (DMF) is for the first time achieved over simple nitrogen-doped carbon (N-C) catalysts. Further, at optimal reaction conditions, a 91% yield of DMF is obtained with excellent catalyst stability. Extensive characterization, including extended X-ray absorption fine-structure (EXAFS) and soft X-ray absorption spectroscopy (sXAS), model reactions, basic data science analysis, and DFT calculations suggest that ppm of Fe in particular FeN 3 sites formed in pyrolysis, rather than non-metallic elements, drive key steps such as H 2 activation and deoxygenation of –OH during HMF HDO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Mg and Ni impurities on tritium diffusion in lithium ceramics through cluster dynamics simulations

This study investigates the impact of Mg and Ni doping on tritium diffusion in LiAlO 2 and LiAl 5 O 8 ceramics, that are used in tritium-producing burnable absorber rods (TPBARs). Utilizing Centipede simulations across a broad temperature range (500 K to 1250 K), we explore the interplay between defect dynamics, cluster formation, and tritium mobility. In LiAlO 2 , Mg doping significantly enhances tritium diffusivity by increasing tritium interstitial concentrations and diffusion coefficients of key species, thereby doubling the overall tritium diffusivity. Ni doping, while shifting the dominant defect to Li vacancies, maintains high tritium mobility due to the low binding energy of Li vacancy-tritium complexes, which ensures effective tritium migration. In LiAl 5 O 8 , Mg and Ni doping results in a slight reduction in the diffusion coefficients of key species, yet the dramatic increase in tritium interstitial concentrations compensates, leading to a net small increase in tritium diffusivity. In conclusion, the findings highlight the critical role of defects in tritium transport and the effect of Mg and Ni defects on the performance of these ceramics in demanding nuclear environments.

Cluster dynamics↗

Role of phosphorus impurities in decomposition of La 2 NiO 4 –La 0.5 Ce 0.5 O 2-δ oxygen electrode in a solid oxide electrolysis cell

This study explored the decomposition mechanism of a La 2 NiO 4 (LNO) phase in the La 2 NiO 4 –La 0.5 Ce 0.5 O 2-δ (LNO-LDC) oxygen electrode in a solid oxide electrolysis cell (SOEC) after testing at 800 °C. Scanning electron microscopy and scanning transmission electron microscopy examinations of the LNO-LDC oxygen electrode before and after testing were undertaken. Other than phosphorus contamination in the form of P-rich grains and P-rich deposits along all grain boundaries (GBs), LNO and LDC phases were intact without degradation in the as-fabricated electrode. However, mild to aggressive LNO phase decomposition triggered by the phosphorus poisoned GBs was observed after testing at 800 °C for 900 h. The evolution of the LNO phase decomposition was noted beginning with the exsolution of Ni into the surrounding LNO matrix and GBs, forming La-rich and Ni-rich phases correspondingly, in the LNO. Importantly, this study illustrates a detailed decomposition progress of the LNO phase at the atomic level under an SOEC operation condition, and sheds light on how to ameliorate the fabrication process of SOECs to enhance their performance and durability.

25 ENERGY STORAGE↗

Thermoelectric properties of Bi{sub 2}Te{sub 3}, Sb{sub 2}Te{sub 3} and Bi{sub 2}Se{sub 3} single crystals with magnetic impurities

Temparature dependence of Seebeck coefficients S, electrical conductivity, heat conductivity k and dimensionless thermoelectric figure of merit ZT of p-Bi{sub 2}Te{sub 3}, Sb{sub 2}Te{sub 3} and n-Bi{sub 2}Se{sub 3}-doped by Fe or Cr were carried out in the temperature interval 7 150 K. - Graphical abstract: Temparature dependence of Seebeck coefficients S, electrical conductivity {sigma}, heat conductivity k and dimensionless thermoelectric figure of merit ZT of p-Bi{sub 2}Te{sub 3}, Sb{sub 2}Te{sub 3} and n-Bi{sub 2}Se{sub 3} doped by Fe or Cr were measured in the temperature interval 7 150 K up to ZT=0.4 as shown in figure. Highlights: Black-Right-Pointing-Pointer Fe and Cr act as donors in Bi{sub 2}Te{sub 3}, Sb{sub 2}Te{sub 3} and Bi{sub 2}Se{sub 3.} Black-Right-Pointing-Pointer The Seebeck coefficient increases in p-Bi{sub 2-x}Fe{sub x}Te{sub 3} and Sb{sub 2-x}Cr{sub x}Te{sub 3}. Black-Right-Pointing-Pointer Dimensionless figure of merit ZT increased up to 0.4 in Cr-doped Sb{sub 2}Te{sub 3} at T=300 K.

36 MATERIALS SCIENCE↗

Design of half-metallic properties induced by 2p impurities in ZnO nanosheet

We perform first-principles study on the electronic and magnetic properties of X-doped (X=Be, B, C, N) graphene-like ZnO nanosheet (NS). When one oxygen is substituted by X atom in ZnONS, X-induced spin polarizations led to transition from the semiconducting to half-metallic properties, with magnetic moments of 2.0, 1.0, 2.0, and 1.0 μ{sub B} per Be, B, C, and N dopant, respectively. The local magnetic moments are found to equal to unpaired electrons in the 2p spin states of the doping X atoms. While two oxygen atoms are substituted by X in ZnONS, the formation energy analysis indicates that X ions have a clear clustering tendency. Depending on distance between two X dopants, the ferromagnetic, antiferromagnetic or nonmagnetic states are all found in X-doped ZnONSs. More interestingly, for C and N doped cases, the half-metallic properties are robust independent on the doping concentrations, while Be or B doped systems would result in half-metallic to magnetic state transition as the doping concentrations increase. - Graphical abstract: Structure of ZnO NS employed to define various configurations of X-doped, as well as spin-density distribution of one Be-doped system. Highlights: ► X-induced spin polarizations result in half-metallicity. ► The local moments equal to unpaired electrons in 2p spin states of X atom. ► The FM, AFM, and NM states are all found in X-doped ZnONSs. ► The half-metallicity in C and N doped cases are robust.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗