Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Germanium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Ray tracing flux calculation for the small and wide angle x-ray scattering diffraction station at the SESAME synchrotron radiation facility

The calculation for the optics of the synchrotron radiation small and wide angle x-ray scattering beamline, currently under construction at SESAME is described. This beamline is based on a cylindrically bent germanium (111) single crystal with an asymmetric cut of 10.5 deg., followed by a 1.2 m long rhodium coated plane mirror bent into a cylindrical form. The focusing properties of bent asymmetrically cut crystals have not yet been studied in depth. The present paper is devoted to study of a particular application of a bent asymmetrically cut crystal using ray tracing simulations with the SHADOW code. These simulations show that photon fluxes of order of 1.09x10{sup 11} photons/s will be available at the experimental focus at 8.79 keV. The focused beam dimensions will be 2.2 mm horizontal full width at half maximum (FWHM) by 0.12 mm vertical (FWHM).

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Formation and conversion of defect centers in low water peak single mode optical fiber induced by gamma rays irradiation

The formation and conversion processes of defect centers in low water peak single mode optical (LWPSM) fiber irradiated with gamma rays were investigated at room temperature using electron spin resonance. Germanium electron center (GEC) and self-trapped hole center (STH) occur when the fibers are irradiated with 1 and 5 kGy cumulative doses, respectively. With the increase in irradiation doses, the GEC defect centers disappear, and new defect centers such as E{sup '} centers (Si and Ge) and nonbridge oxygen hole centers (NBOHCs) generate. The generation of GEC and STH is attributed to the electron transfer, which is completely balanced. This is the main reason that radiation-induced attenuation (RIA) of the LWPSM fiber is only 10 dB/km at communication window. The new defect centers come from the conversion of GEC and STH to E{sup '} centers and NBOHC, and the conversion processes cause bond cleavage, which is the root cause that the RIA of the LWPSM fiber significantly increases up to 180 dB/km at working window. Furthermore, the concentration of new defect centers is saturated easily even by increasing cumulative doses.

36 MATERIALS SCIENCE↗

Focusing Kinoform Lenses: Optical Design and Experimental Validation

X-ray focusing lenses with a kinoform profile are high brilliance optics that can produce nano-sized beams on 3rd generation synchrotron beamlines. The lenses are fabricated with sidewalls of micrometer lateral size. They are virtually non-absorbing and therefore can deliver a high flux over a good aperture. We are developing silicon and germanium lenses that will focus hard x-ray beams to less than 0.5 {mu}m size using a single refractive element. In this contribution, we present preliminary optical design and experimental test carried out on ID06 ESRF: the lenses were used to image directly the undulator source, providing a beam with fwhm of about 0.7 {mu}m.

43 PARTICLE ACCELERATORS↗

Formation of void lattice after annealing of Ge quantum dot lattice in alumina matrix

We report on the formation of a regularly ordered void lattice with a void size of about 4 nm in an alumina matrix. The voids were formed by thermal treatment of a well-ordered three-dimensional Ge quantum dot lattice formed earlier by self-assembled growth in an alumina matrix during magnetron sputtering codeposition of Ge+Al{sub 2}O{sub 3}. During the subsequent annealing the germanium atoms were lost from the film and so voids were produced. The positions of the voids are ordered in the same way as the Ge quantum dots that were present before annealing, while their sizes can be controlled by the deposition parameters.

36 MATERIALS SCIENCE↗

Formation of epitaxial metastable NiGe{sub 2} thin film on Ge(100) by pulsed excimer laser anneal

Epitaxial nickel digermanide (NiGe{sub 2}), a metastable phase, was formed by laser annealing Ni on (100) germanium-on-silicon substrates. The NiGe{sub 2} formation was investigated using transmission electron microscopy, energy dispersive x-ray spectroscopy, x-ray diffraction, Rutherford backscattering spectroscopy, and first-principles calculations. The formation mechanism of NiGe{sub 2} is discussed and is attributed to both the reduced interfacial energy at the NiGe{sub 2}/Ge(100) interface and the kinetic aspects of the laser annealing reaction associated with phase transformation and film agglomeration.

36 MATERIALS SCIENCE↗

Use of Xenon Difluoride to Clean Hazardous By-Products in Ion Implanter Source Housings, Turbo Pumps, and Fore-Lines

This paper describes the use of xenon difluoride to clean deposits in the source housing, source turbo pump, and source turbo pump fore-line of ion implanters. Xenon difluoride has previously been shown to be effective in increasing the lifetime of the ion source{sup 1,2} and this paper presents an extension of the technology to other areas within the tool. Process by-products that are deposited in the source housing, turbo pump, and turbo pump fore-line can not only pose productivity issues, in the case of coatings on insulators, but can also be flammable and toxic in the case of deposits formed within the turbo pump and fore-line. The results presented in this paper detail the initial successful examples of using xenon difluoride to clean these deposits.ATMI has shown that xenon difluoride is capable of cleaning an insulator in an ion implanter. Typically during use an insulator will become increasingly coated with deposits that could lead to productivity problems. By introducing xenon difluoride into the source housing the insulator residues were effectively cleaned in-situ, thereby extending the maintenance interval and resulting in significant consumable savings.Similar deposits that form in the turbo pump and fore-line could not only lead to production problems due to turbo pump failure or fore-line build-up, but pose significant health risks during the ex-situ cleaning process. Through internal testing ATMI has shown that xenon difluoride is able to clean phosphorus and germanium deposits located within a turbo pump. Additionally, testing has demonstrated that the turbo pump fore-line can be cleaned in-situ without the need to remove these components, thereby virtually eliminating the possibility of fires. The cleaning reaction progress and by-products were monitored using FTIR spectrometry and thermocouples.In order to efficiently clean the source housing, turbo pump, and turbo pump fore-line xenon difluoride delivery must be optimized. This paper also details a hardware concept that maximizes xenon difluoride delivery and allows the clean to be done in a way that is viable for production ion implanters.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Femtosecond laser crystallization of amorphous Ge

Ultrafast crystallization of amorphous germanium (a-Ge) in ambient has been studied. Plasma enhanced chemical vapor deposition grown a-Ge was irradiated with single femtosecond laser pulses of various durations with a range of fluences from below melting to above ablation threshold. Extensive use of Raman scattering has been employed to determine post solidification features aided by scanning electron microscopy and atomic force microscopy measurements. Linewidth of the Ge optic phonon at 300 cm{sup -1} as a function of laser fluence provides a signature for the crystallization of a-Ge. Various crystallization regimes including nanostructures in the form of nanospheres have been identified.

36 MATERIALS SCIENCE↗

Effect of high-pressure H{sub 2}O treatment on elimination of interfacial GeO{sub X} layer between ZrO{sub 2} and Ge stack

This investigation demonstrates the effect of high-pressure H{sub 2}O treatment on the elimination of the interfacial germanium suboxide (GeO{sub X}) layer between ZrO{sub 2} and Ge. The formation of GeO{sub X} interlayer increases the gate-leakage current and worsen the controllability of the gate during deposition or thermal cycles. X-ray photoelectron spectroscopy and high-resolution transmission electron microscopy reveal that high-pressure H{sub 2}O treatment eliminates the interfacial GeO{sub X} layer. The physical mechanism involves the oxidation of non-oxidized Zr with H{sub 2}O and the reduction of GeO{sub X} by H{sub 2}. Treatment with H{sub 2}O reduces the gate-leakage current of a ZrO{sub 2}/Ge capacitor by a factor of 1000.

36 MATERIALS SCIENCE↗

Dislocation reduction in heteroepitaxial Ge on Si using SiO{sub 2} lined etch pits and epitaxial lateral overgrowth

We report a technique that significantly reduces threading dislocations in Ge on Si heteroepitaxy. Germanium is first grown on Si and etched to produce pits in the surface where threading dislocations terminate. Further processing leaves a layer of SiO{sub 2} only within etch pits. Subsequent selective epitaxial Ge growth results in coalescence above the SiO{sub 2}. The SiO{sub 2} blocks the threading dislocations from propagating into the upper Ge epilayer. With annealed Ge films grown on Si, the said method reduces the defect density from 2.6 x 10{sup 8} to 1.7 x 10{sup 6} cm{sup -2}, potentially making the layer suitable for electronic and photovoltaic devices.

36 MATERIALS SCIENCE↗

Production of vacancy-oxygen defect in electron irradiated silicon in the presence of self-interstitial-trapping impurities

The enhancement by carbon of vacancy-oxygen (VO) defect formation in electron irradiated silicon was investigated using many samples of various carbon contents. The effect of carbon is well described by a simple analytical model of competing trapping of self-interstitials by VO and by carbon (and by emerging carbon-related defects like C{sub i}O{sub i} and IC{sub i}O{sub i}). The trapping ratio by C{sub s} and by VO was determined to be about 0.9, and the optical calibration coefficients for C{sub i}O{sub i} and IC{sub i}O{sub i} were deduced. In crystals containing a high concentration of Ge, germanium also acts as a self-interstitial trapping impurity and, thus, enhances VO production. The trapping efficiency of Ge is 1000 times less than that of carbon.

36 MATERIALS SCIENCE↗

Rhenium ion beam for implantation into semiconductors

At the ion source test bench in Institute for Theoretical and Experimental Physics the program of ion source development for semiconductor industry is in progress. In framework of the program the Metal Vapor Vacuum Arc ion source for germanium and rhenium ion beam generation was developed and investigated. It was shown that at special conditions of ion beam implantation it is possible to fabricate not only homogenous layers of rhenium silicides solid solutions but also clusters of this compound with properties of quantum dots. At the present moment the compound is very interesting for semiconductor industry, especially for nanoelectronics and nanophotonics, but there is no very developed technology for production of nanostructures (for example quantum sized structures) with required parameters. The results of materials synthesis and exploration are presented.

36 MATERIALS SCIENCE↗

Cryogenic ion implantation near amorphization threshold dose for halo/extension junction improvement in sub-30 nm device technologies

We report on junction advantages of cryogenic ion implantation with medium current implanters. We propose a methodical approach on maximizing cryogenic effects on junction characteristics near the amorphization threshold doses that are typically used for halo implants for sub-30 nm technologies. BF{sub 2}{sup +} implant at a dose of 8 Multiplication-Sign 10{sup 13}cm{sup -2} does not amorphize silicon at room temperature. When implanted at -100 Degree-Sign C, it forms a 30 - 35 nm thick amorphous layer. The cryogenic BF{sub 2}{sup +} implant significantly reduces the depth of the boron distribution, both as-implanted and after anneals, which improves short channel rolloff characteristics. It also creates a shallower n{sup +}-p junction by steepening profiles of arsenic that is subsequently implanted in the surface region. We demonstrate effects of implant sequences, germanium preamorphization, indium and carbon co-implants for extension/halo process integration. When applied to sequences such as Ge+As+C+In+BF{sub 2}{sup +}, the cryogenic implants at -100 Degree-Sign C enable removal of Ge preamorphization, and form more active n{sup +}-p junctions and steeper B and In halo profiles than sequences at room temperature.

36 MATERIALS SCIENCE↗

Structural evolution of Ga-Ge-Te glasses by combined EXAFS and XPS analysis

The structural evolution of Ga{sub x}Ge{sub y}Te{sub 100−x−y} glasses in the vicinity of GeTe{sub 4}-GaTe{sub 3} pseudo-binary tie-line is determined with high-resolution X-ray photoelectron (XPS) and extended X-ray absorption fine structure (EXAFS) spectroscopies. The analysis of XPS data is complicated by similar electronegativity values for the constituent chemical elements, but then the interpretation is facilitated by information from complementary EXAFS analysis of the structure around each element independently. The results show 4/4/2 coordination for Ga/Ge/Te atoms and absence of Ga(Ge)-Ge(Ga) bonds or extended Te clusters in significant concentrations within the whole range of studied composition. The observed structural features correlate well with the measured basic physical properties of Ga-containing germanium telluride glasses.

36 MATERIALS SCIENCE↗

Wave-function engineering and absorption spectra in Si{sub 0.16}Ge{sub 0.84}/Ge{sub 0.94}Sn{sub 0.06}/Si{sub 0.16}Ge{sub 0.84} strained on relaxed Si{sub 0.10}Ge{sub 0.90} type I quantum well

We theoretically investigate germanium-tin alloy as a semiconductor for the design of near infrared optical modulators in which the Ge{sub 1−x}Sn{sub x} alloy is the active region. We have calculated the electronic band parameters for heterointerfaces between strained Ge{sub 1−x}Sn{sub x} and relaxed Si{sub 1−y}Ge{sub y}. Then, a type-I strain-compensated Si{sub 0.10}Ge{sub 0.90}/Si{sub 0.16}Ge{sub 0.84}/Ge{sub 0.94}Sn{sub 0.06} quantum well heterostructure optimized in terms of compositions and thicknesses is studied by solving Schrödinger equation without and under applied bias voltage. The strong absorption coefficient (>1.5 × 10{sup 4} cm{sup −1}) and the shift of the direct transition under large Stark effect at 3 V are useful characteristics for the design of optoelectronic devices based on compressively strained IV-IV heterostructures at near infrared wavelengths.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Light harvesting with Ge quantum dots embedded in SiO{sub 2} or Si{sub 3}N{sub 4}

Germanium quantum dots (QDs) embedded in SiO{sub 2} or in Si{sub 3}N{sub 4} have been studied for light harvesting purposes. SiGeO or SiGeN thin films, produced by plasma enhanced chemical vapor deposition, have been annealed up to 850 °C to induce Ge QD precipitation in Si based matrices. By varying the Ge content, the QD diameter can be tuned in the 3–9 nm range in the SiO{sub 2} matrix, or in the 1–2 nm range in the Si{sub 3}N{sub 4} matrix, as measured by transmission electron microscopy. Thus, Si{sub 3}N{sub 4} matrix hosts Ge QDs at higher density and more closely spaced than SiO{sub 2} matrix. Raman spectroscopy revealed a higher threshold for amorphous-to-crystalline transition for Ge QDs embedded in Si{sub 3}N{sub 4} matrix in comparison with those in the SiO{sub 2} host. Light absorption by Ge QDs is shown to be more effective in Si{sub 3}N{sub 4} matrix, due to the optical bandgap (0.9–1.6 eV) being lower than in SiO{sub 2} matrix (1.2–2.2 eV). Significant photoresponse with a large measured internal quantum efficiency has been observed for Ge QDs in Si{sub 3}N{sub 4} matrix when they are used as a sensitive layer in a photodetector device. These data will be presented and discussed, opening new routes for application of Ge QDs in light harvesting devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

N-type doping of Ge by As implantation and excimer laser annealing

The diffusion and activation of arsenic implanted into germanium at 40 keV with maximum concentrations below and above the solid solubility (8 × 10{sup 19} cm{sup −3}) have been studied, both experimentally and theoretically, after excimer laser annealing (λ = 308 nm) in the melting regime with different laser energy densities and single or multiple pulses. Arsenic is observed to diffuse similarly for different fluences with no out-diffusion and no formation of pile-up at the maximum melt depth. The diffusion profiles have been satisfactorily simulated by assuming two diffusivity states of As in the molten Ge and a non-equilibrium segregation at the maximum melt depth. The electrical activation is partial and decreases with increasing the chemical concentration with a saturation of the active concentration at 1 × 10{sup 20} cm{sup −3}, which represents a new record for the As-doped Ge system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Complexes of self-interstitials with oxygen atoms in Ge

Interactions of germanium self-interstitials with interstitial oxygen atoms in Ge subjected to irradiation at ∼80 K and subsequently to annealing have been studied. To distinguish the processes involving vacancies and self-interstitials the doping with tin was used. It was shown that absorption lines with maximum at 602, 674, 713 and 803 cm{sup −1} are self-interstitials-related. Two lines at 602 and 674, which develop upon annealing in the temperature range 180–240 K, belong to IO complexes, while the bands at 713 and 803 cm{sup −1}, which emerge after annealing at T>220 K, are associated with I{sub 2}O. It is argued that the annealing of IO occurs by two mechanisms: by dissociation and by diffusion.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pd-vacancy complex in Ge: TDPAC and ab initio study

Low temperature metal-induced-crystallized germanium is a promising alternative for silicon in Complementary Metal-Oxide-Semiconductor (CMOS) technology. Palladium (Pd) is one of the metals suitable for inducing the low temperature crystallization. It is not certain, how residual Pd atoms are integrated into the Ge lattice. Therefore, time-different γ-γ perturbed angular correlation (TDPAC) technique using the {sup 100}Pd(→{sup 100}Rh) nuclear probe has been applied to study the hyperfine interactions of this probe in single crystalline undoped Ge. A Pd-vacancy (Pd-V) complex with a unique interaction frequency of 8.4(2) Mrad/s has been identified. The Pd-V complex has been measured to have a maximum fraction after annealing at 350 °C. Density functional theory calculations have confirmed that the Pd-V complex may have the split-vacancy configuration in Ge, in contrast to the full-vacancy configuration observed in Si.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗