Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Function analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Observations of ULF electric field fluctuations in the dayside auroral oval

Electric field oscillations at frequencies centered below 10 Hz were measured by a payload equipped with double-probe electric field detectors which was launched into the dayside auroral oval during the Greenland rocket campaign on January 11, 1975. These oscillations exceeded an amplitude of 3 mV/m broadband and occurred over a period of about 90 s. These oscillations occurred during a proton injection event when the quasi-static electric field was less than 20 mV/m on the average. However, during a brief 2-s interval the electric field exceeded 50 mV/m. Analysis of the amplitude as a function of the spin frequency showed that the electric field was confined to a plane perpendicular to the magnetic field. The power spectrum was of the form f to the -6.5 + or - 1.5 power, where f is the frequency over the range from 8 to 18 Hz. The existence of a large electric field fluctuation in a spatially or temporally confined region of low-amplitude turbulence suggests that this may be an observation of the low-altitude projection of a turbulent region associated with electrostatic shocks which have recently been observed at higher altitudes.

Temerin, M.↗

Compliance and stress sensitivity of spur gear teeth

The magnitude and variation of tooth pair compliance with load position affects the dynamics and loading significantly, and the tooth root stressing per load varies significantly with load position. Therefore, the recently developed time history, interactive, closed form solution for the dynamic tooth loads for both low and high contact ratio spur gears was expanded to include improved and simplified methods for calculating the compliance and stress sensitivity for three involute tooth forms as a function of load position. The compliance analysis has an improved fillet/foundation. The stress sensitivity analysis is a modified version of the Heywood method but with an improvement in the magnitude and location of the peak stress in the fillet. These improved compliance and stress sensitivity analyses are presented along with their evaluation using test, finite element, and analytic transformation results, which showed good agreement.

Cornell, R. W.↗

Effect of boundary layers on solid walls in three-dimensional subsonic wind tunnels

A linear method is developed which accounts for the effects of boundary layers on solid walls in subsonic three-dimensional wind tunnels. The streamwise gradient of the displacement thickness for a solid-wall boundary layer is expressed in terms of the von Karman momentum integral. The growth of the boundary layer due to the wall shearing stress is small compared to the variation caused by the model-induced pressure gradient. The viscous boundary condition can be expressed in terms of the edge velocity gradient and the gradient of the inviscid velocity potential function at the wall. Utilizing this analysis on the solid walls of several three-dimensional wind tunnel configurations shows that the most pronounced wall boundary-layer effect is on solid blockage for completely closed wind tunnels. For solid-wall tunnel configurations, the streamline curvature interference factor is reduced by a significant amount, while the lift interference factor at the model station does not depend on the boundary-layer parameter. For combination wall configurations, the slot effect of the horizontal walls dominates the viscous effect of the solid sidewalls.

Adcock, J. B.↗

ADS-1 - A new general-purpose optimization program

Today, numerous programs are available which may be coupled with finite element analysis or other analysis techniques to perform the optimization function in the solution of structural synthesis problems. However, most of these codes include only one or two algorithms and many have not been tested on problems of significant size and complexity. There is, therefore, a need for a reliable, general-purpose, publicly available code, containing a variety of modern algorithms for use in structural synthesis as well as general engineering design. The ADS-1 program (Automated Design Synthesis: Version 1) was written in response to this need. The present investigation has the objective to present the capabilities of the ADS program and to demonstrate its application to structural synthesis. The ADS program solves the general nonlinear constrained optimization problem in the standard form. At each level of the optimization process, several options are available.

Vanderplaats, G. N.↗

Solidification study of some Ni- and Co-base alloys

An ongoing research program aims to characterize the solidification of several Ni- and Co-based commercial wrought type alloys. The techniques used and the data items sought are: (1) thermal analysis, liquidus, nonequilibrium solidus as a function of cooling rate, secondary reactions temperatures, incipient melting, progress of solidification as a function of temperature; (2) optical metallography, characteristic structures and secondary dendrite arm spacing as a function of cooling rate; (3) X-ray diffraction, identification of precipitates; and (4) SEM/EDAX, measure of microsegregation.

Jeanfils, C. L.↗

Automated Design Synthesis

Automated Design Synthesis (ADS) program is general-purpose numerical optimization program containing wide variety of algorithms. Assumed user prepares analysis problem capable of computing objective function and constraints. Program able to accept as part of input design variable quantities. Optimization process carried out by ADS coupled with user's program. ADS used for constrained and unconstrained function minimization. Solution of general problem separated into three basic levels: Strategy, Optimizer, and One-Dimensional Search. Already significant applications in area of structural synthesis (minimum-weight design).

Vanderplaats, G. N.↗

Measurements of free tropospheric ozone - An aircraft survey from 44 degrees north to 46 south latitude

Ozone data were obtained in the free troposphere at altitudes of 5 to 7.5 km and at latitudes from 44 degrees N to 46 degrees S during a 3-week period from October 19 to November 4, 1982. Flight trajectories included the continental U.S., Central America, and the western coast of South America. Maximum observed ozone was 110 ppb at about 41 degrees S latitude and at an altitude of 7.3 km (msl). Analysis of the data as a function of latitude showed a region of elevated ozone in the southern latitudes extending from about 2 degrees to 30 degrees in which latitudinal ozone averages (2 degree bands) peaked at about 80 ppb. Ozone concentrations, measured at northern latitudes, were lower, averaging about 35 ppb. A discussion of the data, including comparison with other ozone data sets, is presented.

Gregory, G. L.↗

Observations of solar-flare ionization in the mesosphere using coherent-scatter radar

Observations of solar-flare ionization in the mesosphere can be made using coherent-scatter radar systems. The scattered power profiles they measure in the 60-90 km altitude region is a function of the ion concentration gradient and the intensity of turbulent mixing at each altitude. By comparing the power profiles before, during and after a solar flare, it is possible to estimate the ion production rate during the flare as a function of altitude and time. This analysis is used to compare the ion production rates with generally accepted ion-chemical models. Comparisons are made with ion production rates estimated from the solar X-ray flux for the same flare made by geostationary satellites.

Parker, J. W.↗

Structure-to-glass transition temperature relationships in high temperature stable condensation polyimides

The presence of a hexafluoroisopropylidene (6F) connecting group in aryl dianhydrides used to prepare aromatic condensation polyimides provides high glass transition temperature (T sub g) polyimides with excellent thermo-oxidative stability. The purpose of this study was to determine if a trifluorophenyl-ethylidene (3F) connecting group would have a similar effect on the T sub g of aromatic condensation polyimides. A new dianhydride containing the 3F connecting group was synthesized. This dianhydride and an aromatic diamine also containing the 3F connecting group were used together and in various combinations with known diamines or known dianhydrides, respectively, to prepare new 3F containing condensation polyimides. Known polyimides, including some with the 6F connecting linkage, were also prepared for comparison purposes. The new 3F containing polymers and the comparison polymers were prepared by condensation polymerization via the traditional amic-acid polymerization method in N,N-dimethylacetamide solvent. The solutions were characterized by determining their inherent viscosities and then were thermally converted into polyimide films under nitrogen atmosphere at 300 to 500 C, usually 350 C. The T sub g's of the films and resin discs were then determined by thermomechanical analysis and were correlated as a function of the final processing temperatures of the films and resin discs. The results showed that similarities existed in the T sub g's depending on the nature of the connecting linkage in the monomers used to prepare the condensation polyimides.

Alston, W. B.↗

A technique for incorporating the NASA spacelab payload dedicated experiment processor software into the simulation system for the payload crew training complex

The feasibility of some off-the-shelf microprocessors and state-of-art software is assessed (1) as a development system for the principle investigator (pi) in the design of the experiment model, (2) as an example of available technology application for future PI's experiments, (3) as a system capable of being interactive in the PCTC's simulation of the dedicated experiment processor (DEP), preferably by bringing the PI's DEP software directly into the simulation model, (4) as a system having bus compatibility with host VAX simulation computers, (5) as a system readily interfaced with mock-up panels and information displays, and (6) as a functional system for post mission data analysis.

Bremmer, D. A.↗

On the utilization of engineering knowledge in design optimization

Some current research work conducted at the University of Michigan is described to illustrate efforts for incorporating knowledge in optimization in a nontraditional way. The incorporation of available knowledge in a logic structure is examined in two circumstances. The first examines the possibility of introducing global design information in a local active set strategy implemented during the iterations of projection-type algorithms for nonlinearly constrained problems. The technique used algorithms for nonlinearly constrained problems. The technique used combines global and local monotinicity analysis of the objective and constraint functions. The second examines a knowledge-based program which aids the user to create condigurations that are most desirable from the manufacturing assembly viewpoint. The data bank used is the classification scheme suggested by Boothroyd. The important aspect of this program is that it is an aid for synthesis intended for use in the design concept phase in a way similar to the so-called idea-triggers in creativity-enhancement techniques like brain-storming. The idea generation, however, is not random but it is driven by the goal of achieving the best acceptable configuration.

Papalambros, P.↗

Design and analysis study of a spacecraft optical transceiver package

A detailed system level design of an Optical Transceiver Package (OPTRANSPAC) for a deep space vehicle whose mission is outer planet exploration is developed. In addition to the terminal design, this study provides estimates of the dynamic environments to be encountered by the transceiver throughout its mission life. Optical communication link analysis, optical thin lens design, electronic functional design and mechanical layout and packaging are employed in the terminal design. Results of the study describe an Optical Transceiver Package capable of communicating to an Earth Orbiting Relay Station at a distance of 10 Astronomical Units (AU) and data rates up to 100 KBPS. The transceiver is also capable of receiving 1 KBPS of command data from the Earth Relay. The physical dimensions of the terminal are contained within a 3.5' x 1.5' x 2.0' envelope and the transceiver weight and power are estimated at 52.2 Kg (115 pounds) and 57 watts, respectively.

Lambert, S. G.↗

Example on how to model and simulate turbulence for flight simulators

Analytical developments relative to gust response are discussed. Turbulence length scale, spectral functions, zero crossing values, gust loads analysis, power spectral techniques for analyzing the response of aircraft in turbulence, the spectrum of the rolling moment coefficient, and the spectrum correction factor are among the issues considered.

Houbolt, John C.↗

Integrated restructurable flight control system demonstration results

The purpose of this study was to examine the complementary capabilities of several restructurable flight control system (RFCS) concepts through the integration of these technologies into a complete system. Performance issues were addressed through a re-examination of RFCS functional requirements, and through a qualitative analysis of the design issues that, if properly addressed during integration, will lead to the highest possible degree of fault-tolerant performance. Software developed under previous phases of this contract and under NAS1-18004 was modified and integrated into a complete RFCS subroutine for NASA's B-737 simulation. The integration of these modules involved the development of methods for dealing with the mismatch between the outputs of the failure detection module and the input requirements of the automatic control system redesign module. The performance of this demonstration system was examined through extensive simulation trials.

Weiss, Jerold L.↗

A new state space model for the NASA/JPL 70-meter antenna servo controls

A control axis referenced model of the NASA/JPL 70-m antenna structure is combined with the dynamic equations of servo components to produce a comprehansive state variable (matrix) model of the coupled system. An interactive Fortran program for generating the linear system model and computing its salient parameters is described. Results are produced in a state variable, block diagram, and in factored transfer function forms to facilitate design and analysis by classical as well as modern control methods.

Hill, R. E.↗

LANDSAT-4 and LANDSAT-5 Multispectral Scanner Coherent Noise Characterization and Removal

A technique is described for characterizing the coherent noise found in LANDSAT-4 and LANDSAT-5 MSS data and a companion technique for filtering out the coherent noise. The techniques are demonstrated on LANDSAT-4 and LANDSAT-5 MSS data sets, and explanations of the noise pattern are suggested in Appendix C. A cookbook procedure for characterizing and filtering the coherent noise using special NASA/Goddard IDIMS functions is included. Also presented are analysis results from the retrofitted LANDSAT-5 MSS sensor, which shows that the coherent noise has been substantially reduced.

Tilton, James C.↗

Development of thermomechanical life prediction models for thermal barrier coatings

Thermal barrier coatings (TBCs) for turbine airfoils in high-performance engines represent an advanced materials technology with both performance and durability benefits. The foremost TBC benefit is the reduction of heat transferred into air-cooled components. To achieve these benefits, however, the TBC system must be reliable. Mechanistic thermomechanical and thermochemical life models and statistically significant design data are therefore required for the reliable exploitation of TBC benefits on gas turbine airfoils. Garrett's NASA-HOST Program (NAS3-23945) is designed to fulfill these requirements. This program focuses on predicting the lives of two types of strain-tolerant and oxidation-resistant TBC systems that are produced by commercial coating suppliers to the gas turbine industry. The plasma-sprayed TBC system, composed of a low-pressure plasma-spray (LPPS) applied oxidation resistant NiCrAlY bond coating, and an air-plasma-sprayed yttria partially stabilized zirconia insulated layer is applied by both Chromalloy and Klock. The second type of TBC is applied by the electron beam-physical vapor deposition process by Temescal. Thermomechanical life models are being tailored to predict TBC strain tolerance in terms of materials, engine, and mission parameters. Continuum and fracture mechanics approaches and statistical methods are being evaluated to develop tensile and compressive strain functions required to drive a mission analysis capable thermomechanical life model for TBCs. Results of initial testing to calibrate these life models will be presented.

Strangman, T. E.↗

DATAMAP upgrade version 4.0

The changes made on the data analysis and management program DATAMAP (Data from Aeromechanics Test and Analytics - Management and Analysis Package) are detailed. These changes are made to Version 3.07 (released February, 1981) and are called Version 4.0. Version 4.0 improvements were performed by Sterling Software under contract to NASA Ames Research Center. The increased capabilities instituted in this version include the breakout of the source code into modules for ease of modification, addition of a more accurate curve fit routine, ability to handle higher frequency data, additional data analysis features, and improvements in the functionality of existing features. These modification will allow DATAMAP to be used on more data sets and will make future modifications and additions easier to implement.

Watts, Michael E.↗