Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Finite Element Method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

An iterative finite element-integral technique for predicting sound radiation from turbofan inlets

A new iterative solution technique for predicting the sound field radiated from a turbofan inlet is presented. The sound field is divided into two regions; the sound field within the inlet which is computed using the finite element method and the radiation field outside the inlet which is calculated using an integral solution technique. A 'unified' solution is obtained by matching the finite element and integral solutions at the interface between the interior and exterior regions. The applicability of the iterative technique is demonstrated by considering several simple cases for which exact or 'classical' solutions for the sound field are available. These examples show that the proper solution is obtained within five iterations. The overall accuracy of the method is demonstrated by comparison with experimental data.

Horowitz, S. J.↗
NASA NTRS1972

Finite element analysis of large transient elastic-plastic deformations of simple structures, with application to the engine rotor fragment containment/deflection problem

Assumed-displacement versions of the finite-element method are developed to predict large-deformation elastic-plastic transient deformations of structures. Both the conventional and a new improved finite-element variational formulation are derived. These formulations are then developed in detail for straight-beam and curved-beam elements undergoing (1) Bernoulli-Euler-Kirchhoff or (2) Timoshenko deformation behavior, in one plane. For each of these categories, several types of assumed-displacement finite elements are developed, and transient response predictions are compared with available exact solutions for small-deflection, linear-elastic transient responses. The present finite-element predictions for large-deflection elastic-plastic transient responses are evaluated via several beam and ring examples for which experimental measurements of transient strains and large transient deformations and independent finite-difference predictions are available.

Wu, R. W.↗
NASA NTRS1998

Numerical Differentiation for Adaptively Refined Finite Element Meshes

Postprocessing of point-wise data is a fundamental process in many fields of research. Numerical differentiation is a key operation in computational electromagnetics. In the case of data obtained from a finite element method with automatic mesh refinement much work needs still to be done. This paper addresses some issues in differentiating data obtained from a finite element electromagnetic code with adaptive mesh refinement, and it proposes a methodology for deriving the electric field given the magnetic field on a mesh of linear triangular elements. The procedure itself is nevertheless more general and might be extended for numerically differentiating any point-wise solution based on triangular meshes.

Borgioli, Andrea↗
NASA NTRS1979

Recent developments in finite element analysis for transonic airfoils

The prediction of aerodynamic forces in the transonic regime generally requires a flow field calculation to solve the governing non-linear mixed elliptic-hyperbolic partial differential equations. Finite difference techniques were developed to the point that design and analysis application are routine, and continual improvements are being made by various research groups. The principal limitation in extending finite difference methods to complex three-dimensional geometries is the construction of a suitable mesh system. Finite element techniques are attractive since their application to other problems have permitted irregular mesh elements to be employed. The purpose of this paper is to review the recent developments in the application of finite element methods to transonic flow problems and to report some recent results.

Hafez, M. M.↗
NASA NTRS1991

Shear buckling of specially orthotropic plates with centrally located cutouts

There is significant industry demand for a method of analyzing the shear buckling of composite plates with cutouts. This method should be able to easily accommodate frequent changes in model design; inflexibility being the major drawback to current finite element methods. The approach taken here is broken into two problems, prebuckling and buckling. To solve for the prebuckling stresses, complex variable equations are used in conjunction with boundary collocation. The least squares approach is utilized to improve the accuracy of the results. The buckling problem is solved using the Ritz method. A product of the Ritz method is a complicated integral equation which is solved using numerical integration. To date, the aforementioned method of determining the prebuckling stresses was verified against infinite plate theory and finite elements. Recent efforts have focused on reducing run time, improving accuracy and adding more boundary condition choices.

Klang, Eric C.↗
NASA NTRS1990

Shear buckling of specially orthotropic plates with centrally located cutouts

There is significant industry demand for a method of analyzing the shear buckling of composite plates with cutouts. This method should be able to easily accommodate frequent changes in model design; inflexibility is the major drawback to current finite element methods. The approach taken here is broken into two problems, prebuckling and buckling. To solve for the prebuckling stresses, complex variable equations are used in conjunction with boundary collocation. The least squares approach is utilized to improve the accuracy of the results. The buckling problem is solved using the Ritz method. A product of the Ritz method is a complicated integral equation which is solved using numerical integration. To date, the aforementioned method of determining the prebuckling stresses was verified against infinite plate theory and finite elements.

Owen, Vicki L.↗
DOE OSTI2022

The strip method for shape derivatives

Abstract A major challenge in shape optimization is the coupling of finite element method (FEM) codes in a way that facilitates efficient computation of shape derivatives. This is particularly difficult with multiphysics problems involving legacy codes, where the costs of implementing and maintaining shape derivative capabilities are prohibitive. The volume and boundary methods are two approaches to computing shape derivatives. Each has a major drawback: the boundary method is less accurate, while the volume method is more invasive to the FEM code. We introduce the strip method , which computes shape derivatives on a strip adjacent to the boundary. The strip method makes code coupling simple. Like the boundary method, it queries the state and adjoint solutions at quadrature nodes, but requires no knowledge of the FEM code implementations. At the same time, it exhibits the higher accuracy of the volume method. As an added benefit, its computational complexity is comparable to that of the boundary method, that is, it is faster than the volume method. We illustrate the benefits of the strip method with numerical examples.

Hardesty, Sean↗
DOE OSTI2023

A family of independent Variable Eddington Factor methods with efficient preconditioned iterative solvers

We present a family of discretizations for the Variable Eddington Factor (VEF) equations that have high-order accuracy on curved meshes and efficient preconditioned iterative solvers. The VEF discretizations are combined with the Discontinuous Galerkin transport discretization from to form effective high-order, linear transport methods. The VEF discretizations are derived by extending the unified analysis of Discontinuous Galerkin methods for elliptic problems presented by Arnold et al. to the VEF equations. This framework is used to define analogs of the interior penalty, second method of Bassi and Rebay, minimal dissipation local Discontinuous Galerkin, and continuous finite element methods. The analysis of subspace correction preconditioners, which use a continuous operator to iteratively precondition the discontinuous discretization, is extended to the case of the non-symmetric VEF system. Numerical results demonstrate that the VEF discretizations have arbitrary-order accuracy on curved meshes, preserve the thick diffusion limit, and are effective on a proxy problem from thermal radiative transfer in both outer transport iterations and inner preconditioned linear solver iterations. We demonstrate that the VEF solution converges to the S N transport solution as the mesh is refined on both problems with smooth and non-smooth behavior in angle. Parallel performance studies show that the interior penalty VEF discretization's linear solve weak scales out to 1024 processors and strong scales well on a single node. Particular attention is paid to the parallel performance of the VEF algorithm when used in combination with a parallel block Jacobi transport sweep.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2017

Metal nano-grids for transparent conduction in solar cells

A general procedure for predicting metal grid performance in solar cells was developed. Unlike transparent conducting oxides (TCOs) or other homogeneous films, metal grids induce more resistance in the neighbor layer. The resulting balance of transmittance, neighbor and grid resistance was explored in light of cheap lithography advances that have enabled metal nano-grid (MNG) fabrication. The patterned MNGs have junction resistances and degradation rates that are more favorable than solution-synthesized metal nanowires. Neighbor series resistance was simulated by the finite element method, although a simpler analytical model was sufficient in most cases. Finite-difference frequency-domain transmittance simulations were performed for MNGs with minimum wire width (w) of 50 nm, but deviations from aperture transmittance were small in magnitude. Depending on the process, MNGs can exhibit increased series resistance as w is decreased. However, numerous experimental reports have already achieved transmittance-MNG sheet resistance trade-offs comparable to TCOs. The transmittance, neighbor and MNG series resistances were used to parameterize a grid fill factor for a solar cell. In conclusion, this new figure of merit was used to demonstrate that although MNGs have only been employed in low efficiency solar cells, substantial gains in performance are predicted for decreased w in all high efficiency absorber technologies.

14 SOLAR ENERGY↗
DOE OSTI2018

A massively parallel and memory-efficient FEM toolbox with a hybrid total FETI solver with accelerator support

In this article, we present the ExaScale PaRallel finite element tearing and interconnecting SOlver (ESPRESO) finite element method (FEM) library, which includes an FEM toolbox with interfaces to professional and open-source simulation tools, and a massively parallel hybrid total finite element tearing and interconnecting (HTFETI) solver which can fully utilize the Oak Ridge Leadership Computing Facility Titan supercomputer and achieve superlinear scaling. This article presents several new techniques for finite element tearing and interconnecting (FETI) solvers designed for efficient utilization of supercomputers with a focus on (i) performance—we present a fivefold reduction of solver runtime for the Laplace equation by redesigning the FETI solver and offloading the key workload to the accelerator. We compare Intel Xeon Phi 7120p and Tesla K80 and P100 accelerators to Intel Xeon E5-2680v3 and Xeon Phi 7210 central processing units; and (ii) memory efficiency—we present two techniques which increase the efficiency of the HTFETI solver 1.8 times and push the limits of the largest possible problem ESPRESO that can solve from 124 to 223 billion unknowns for problems with unstructured meshes. Finally, we show that by dynamically tuning hardware parameters, we can reduce energy consumption by up to 33%.

Computer Science↗
NASA NTRS1978

Finite element analysis in a minicomputer/mainframe environment

Design considerations were evaluated for general purpose finite element systems to maximize performance when installed on distributed computer hardware/software systems. It is shown how the features of current minicomputers complement those of a modular implementation of the finite element method for increasing the control, speed, and visibility (interactive graphics) in solving structural problems at reduced cost. The approach used is to implement a finite element system in a distributed computer environment to solve structural problems and to explore alternatives in distributing finite element computations.

Storaasli, O. O.↗
NASA NTRS1982

An iterative finite element-integral technique for predicting sound radiation from turbofan inlets in steady flight

A new iterative solution technique for predicting the sound field radiated from a turbofan inlet in steady flight is presented. The sound field is divided into two regions: the sound field within and near the inlet which is computed using the finite element method and the radiation field beyond the inlet which is calculated using an integral solution technique. A continuous solution is obtained by matching the finite element and integral solutions at the interface between the two regions. The applicability of the iterative technique is demonstrated by comparison of experimental results with the theoretical results for several different inlet configurations with and without flow. These examples show that good agreement between experiment and theory is obtained within five iterations.

Horowitz, S. J.↗
NASA NTRS1983

Optimization of acoustic liners by the hybrid finite element-integral approach

An iterative solution technique for predicting the sound field radiated from a turbofan inlet is used to predict the optimum inlet acoustic liner. The analytical approach divides the sound field into two regions: the sound field within and near the inlet which is computed using the finite element method and the radiation field beyond the inlet which is calculated using an integral solution technique. A continuous solution is obtained by matching the finite element and integral solutions at the interface between the two regions. Using a trial and error scheme, this analytical procedure is used to calculate the impedance value of the duct liner which will produce a minimum sound pressure level in the far field. Several examples of straight and non-uniform ducts with and without flow are presented.

Sigman, R. K.↗
NASA NTRS1988

Superelement methods applications to micromechanics of high temperature metal matrix composites

Adaptation of the superelement finite-element method for micromechanics of continuous fiber high temperature metal matrix composites (HT-MMC) is described. The method is used to predict the thermomechanical behavior of P100-graphite/copper composites using MSC/NASTRAN and it is also used to validate those predicted by using an in-house computer program designed to perform micromechanics for HT-MMC. Typical results presented in the paper include unidirectional composite thermal properties, mechanical properties, and microstresses.

Caruso, J. J.↗
NASA NTRS1989

Computational Methods for Structural Mechanics and Dynamics, part 1

The structural analysis methods research has several goals. One goal is to develop analysis methods that are general. This goal of generality leads naturally to finite-element methods, but the research will also include other structural analysis methods. Another goal is that the methods be amenable to error analysis; that is, given a physical problem and a mathematical model of that problem, an analyst would like to know the probable error in predicting a given response quantity. The ultimate objective is to specify the error tolerances and to use automated logic to adjust the mathematical model or solution strategy to obtain that accuracy. A third goal is to develop structural analysis methods that can exploit parallel processing computers. The structural analysis methods research will focus initially on three types of problems: local/global nonlinear stress analysis, nonlinear transient dynamics, and tire modeling.

Stroud, W. Jefferson↗
NASA NTRS1994

Elastic-plastic models for multi-site damage

This paper presents recent developments in advanced analysis methods for the computation of stress site damage. The method of solution is based on the p-version of the finite element method. Its implementation was designed to permit extraction of linear stress intensity factors using a superconvergent extraction method (known as the contour integral method) and evaluation of the J-integral following an elastic-plastic analysis. Coarse meshes are adequate for obtaining accurate results supported by p-convergence data. The elastic-plastic analysis is based on the deformation theory of plasticity and the von Mises yield criterion. The model problem consists of an aluminum plate with six equally spaced holes and a crack emanating from each hole. The cracks are of different sizes. The panel is subjected to a remote tensile load. Experimental results are available for the panel. The plasticity analysis provided the same limit load as the experimentally determined load. The results of elastic-plastic analysis were compared with the results of linear elastic analysis in an effort to evaluate how plastic zone sizes influence the crack growth rates. The onset of net-section yielding was determined also. The results show that crack growth rate is accelerated by the presence of adjacent damage, and the critical crack size is shorter when the effects of plasticity are taken into consideration. This work also addresses the effects of alternative stress-strain laws: The elastic-ideally-plastic material model is compared against the Ramberg-Osgood model.

Actis, Ricardo L.↗