Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Effective diffusivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Diffusion Limited Supercritical Water Oxidation (SCWO) in Microgravity Environments

Tests designed to quantify the gravitational effects on thermal mixing and reactant injection in a Supercritical Water Oxidation (SCWO) reactor have recently been performed in the Zero Gravity Facility (ZGF) at NASA s Glenn Research Center. An artificial waste stream, comprising aqueous mixtures of methanol, was pressurized to approximately 250 atm and then heated to 450 C. After uniform temperatures in the reactor were verified, a controlled injection of air was initiated through a specially designed injector to simulate diffusion limited reactions typical in most continuous flow reactors. Results from a thermal mapping of the reaction zone in both 1-g and 0-g environments are compared. Additionally, results of a numerical model of the test configuration are presented to illustrate first order effects on reactant mixing and thermal transport in the absence of gravity.

Hicks, M. C.↗

Applicability of a diffusion model to lateral transport in the terrestrial and lunar exospheres.

Kinetic theory is used to determine a series expansion of the vertical flux of particles in an exosphere in terms of time and space derivatives of particle concentration, exobase velocity, and temperature. For sufficiently large scale variations of these parameters in time and space, the series can be truncated to a form that is similar to a diffusion equation. Owing to this analogy, it is possible to unite the mathematical description of molecular diffusion, which governs thermospheric flow, and the corresponding exospheric equation by using effective transport coefficients which change smoothly with altitude through the transition from thermosphere to exosphere. A new definition of the exobase for lateral flow emerges from the analogy of exospheric and thermospheric diffusion, as the altitude where the horizontal mean free path length equals the mean horizontal extent of ballistic trajectories of the transported gas, as opposed to the scale height of the dominant gas which determines the exobase for escape. It is shown that the approximation of exospheric lateral flow as a diffusion process is applicable to global scale problems concerning terrestrial helium and heavier gases, and lunar gases heavier than helium.

Hodges, R. R., Jr.↗

Observed effects of earth-reflected radiation and hydrogen drag on the orbital accelerations of balloon satellites.

From March through May 1967, the high-altitude balloon satellites Pageos (1966 56A) and Dash 2 (1963 30D) were both in continuous sunlight orbits. Observed variations in the orbital accelerations of both satellites are found to be due primarily to a combination of the perturbing effects of earth albedo radiation and atmospheric drag. An equation based on diffuse Lambertian reflection of sunlight from the earth predicts quite well the observed trend of orbital accelerations for both satellites due to the force of earth albedo radiation. After correcting for this effect, the remaining orbital energy changes are found to be consistent with atmospheric drag perturbations, making it possible to deduce mean exospheric densities above 2300 km. The results indicate that hydrogen concentrations during the observation period were about three times greater than that given by the U.S. Standard Atmosphere Supplements (1966).

Prior, E. J.↗

Jet Noise Suppression

The objectives of this chapter are to review and summarize the jet noise suppression technology, to provide a physical and theoretical model to explain the measured jet noise suppression characteristics of different concepts, and to provide a set of guidelines for evolving jet noise suppression designs. The underlying principle for all jet noise suppression devices is to enhance rapid mixing (i.e., diffusion) of the jet plume by geometric and aerothermodynamic means. In the case of supersonic jets, the shock-cell broadband noise reduction is effectively accomplished by the elimination or mitigation of the shock-cell structure. So far, the diffusion concepts have predominantly concentrated on jet momentum and energy (kinetic and thermal) diffusion, in that order, and have yielded better noise reduction than the simple conical nozzles. A critical technology issue that needs resolution is the effect of flight on the noise suppression potential of mechanical suppressor nozzles. A more thorough investigation of this mechanism is necessary for the successful development and design of an acceptable noise suppression device for future high-speed civil transports.

Gliebe, P. R.↗

Model of Jovian F region ionosphere (Jovian ionosphere model in offset dipole approximation)

The geomagnetic control of the Earth's atmosphere is well understood. In the F-region and the topside ionosphere, non-electrical forces transport plasma along the magnetic field lines only. In consequence, the worldwide distribution of ionization is strongly dependent on the dip angle. For example, the equatorial anomaly is roughly symmetrical about the dipole equator rather than the geographic. The same appears to be the case in the Jovian ionosphere (Mahajan, 1981). The influence of the magnetic field of Jupiter on its ionization pattern is one of several outstanding topics which need to be studied. Tan (1986) investigated the formation of the equatorial anomaly in the Jovian ionosphere under a centered dipole model. Tan (1988) further studied the effect of the tilt of the Jovian dipole. The results were in broad agreement with those of a diffusive equilibrium model (Tan and Wu, 1981). An off-centered dipole model is constructed and its effects on the ionization pattern are investigated.

Tan, A.↗

Effects of high doping levels on silicon solar cell performance

Open-circuit voltages measured in silicon solar cells made from 0.01 ohm-cm material are 150 mV lower than voltages calculated from simple diffusion theory and cannot be explained by poor diffusion lengths or surface leakage currents. An analytical study was made to determine whether high doping effects, which increase the intrinsic carrier concentration, could account for the low observed voltages and to determine the limits on voltage and efficiency imposed by high doping effects. The results indicate that the observed variation of voltage with base resistivity is predicted by these effects. A maximum efficiency of 19% (AMO) and a voltage of 0.7 volts were calculated for 0.1 ohm-cm cells assuming an optimum diffused layer impurity profile.

Godlewski, M. P.↗

RITRACKS: A Software for Simulation of Stochastic Radiation Track Structure, Micro and Nanodosimetry, Radiation Chemistry and DNA Damage for Heavy Ions

The code RITRACKS (Relativistic Ion Tracks) has been developed over the last few years at the NASA Johnson Space Center to simulate the effects of ionizing radiations at the microscopic scale, to understand the effects of space radiation at the biological level. The fundamental part of this code is the stochastic simulation of radiation track structure of heavy ions, an important component of space radiations. The code can calculate many relevant quantities such as the radial dose, voxel dose, and may also be used to calculate the dose in spherical and cylindrical targets of various sizes. Recently, we have incorporated DNA structure and damage simulations at the molecular scale in RITRACKS. The direct effect of radiations is simulated by introducing a slight modification of the existing particle transport algorithms, using the Binary‐Encounter‐Bethe model of ionization cross sections for each molecular orbitals of DNA. The simulation of radiation chemistry is done by a step‐by‐step diffusion‐reaction program based on the Green's functions of the diffusion equation]. This approach is also used to simulate the indirect effect of ionizing radiation on DNA. The software can be installed independently on PC and tablets using the Windows operating system and does not require any coding from the user. It includes a Graphic User Interface (GUI) and a 3D OpenGL visualization interface. The calculations are executed simultaneously (in parallel) on multiple CPUs. The main features of the software will be presented.

Plante, I↗

The response of the thermospheric nitric oxide to an auroral storm. I - Low and middle latitudes

The response of low- and mid-latitude NO to the September 19, 1984 magnetic storm is studied. In particular, the effect of variations in the temperature and composition of the lower thermosphere on NO is investigated. Much of the observed NO response is adequately explained by including these variations in a photochemical model. In particular, Joule heating at auroral latitudes can cause temperature enhancements at nonauroral latitudes, which in turn can lead directly to an increase in the NO. The NO is most directly sensitive to heating at altitude above 120 km. Below 120 km, NO increased through downward diffusion from above. Sensitivity studies were performed to investigate the effect that uncertainties in the NO chemical scheme and in the state of the neutral atmosphere can have on the comparison of the model to the data. It is shown that the best fit to the midlatitude American orbit data is for O/O2 ratio twice that in the original TGCM simulation and for an N(2D) quenching value of 5 x 10 to the -13th.

Siskind, D. E.↗

Multicomponent Gas Diffusion and an Appropriate Momentum Boundary Condition

Multicomponent gas diffusion is reviewed with particular emphasis on gas flows near solid boundaries-the so-called Kramers-Kistemaker effect. The aim is to derive an appropriate momentum boundary condition which governs many gaseous species diffusing together. The many species' generalization of the traditional single gas condition, either as slip or stick (no-slip), is not obvious, particularly for technologically important cases of lower gas pressures and very dissimilar molecular weight gases. No convincing theoretical case exists for why two gases should interact with solid boundaries equally but in opposite flow directions, such that the total gas flow exactly vanishes. ln this way, the multicomponent no-slip boundary requires careful treatment The approaches discussed here generally adopt a microscopic model for gas-solid contact. The method has the advantage that the mathematics remain tractable and hence experimentally testable. Two new proposals are put forward, the first building in some molecular collision physics, the second drawing on a detailed view of surface diffusion which does not unphysically extrapolate bulk gas properties to govern the adsorbed molecules. The outcome is a better accounting of previously anomalous experiments. Models predict novel slip conditions appearing even for the case of equal molecular weight components. These approaches become particularly significant in view of a conceptual contradiction found to arise in previous derivations of the appropriate boundary conditions. The analogous case of three gases, one of which is uniformly distributed and hence non-diffusing, presents a further refinement which gives unexpected flow reversals near solid boundaries. This case is investigated alone and for aggregating gas species near their condensation point. In addition to predicting new physics, this investigation carries practical implications for controlling vapor diffusion in the growth of crystals used in medical diagnosis (e.g. mercuric iodide) and semiconductors.

Noever, David A.↗

CFD Simulations of the IHF 13-Inch Nozzle Flow: 55° Sphere-Cone Model, Manufactured Fences and Gaps

This paper reports computational analyses of tests in a high enthalpy arc-jet facility at NASA Ames Research Center. These tests were conducted using 23.6-cm diameter, 55° sphere-cone models placed in a free jet downstream of the 33.0-cm diameter conical nozzle in the 60-MW Interaction Heating Facility. Some of the sphere-cone models include surface features such as manufactured fences and gaps intended to simulate effects of differential recession, all of which disturb the flow, producing augmented heating locally and downstream. Test calibration data were obtained using slug and Gardon gage stagnation calorimeters, and a sphere-cone calorimeter model with six Gardon heat flux gages and five pressure gages. The present analysis comprises computational fluid dynamics simulations of the nonequilibrium flowfield in the facility nozzle and test box, including the models tested, and comparisons with the experimental measurements. Various issues related to testing are considered: diffuser flow capture, flow characterization based on the calorimeter data, effects of the model surface recession, and prediction of surface quantities for the models with surface features. These simulations take into account nonuniform total enthalpy profiles at the nozzle inlet as well as the expansion waves emanating from the nozzle exit and their effects on the model flowfields.

Arc-jets↗

The flux ejection dynamo effect

The mean-field effects of cyclonic convection become increasingly complex when the cyclonic rotation exceeds 1/2 pi. Net helicity is not required, with negative turbulent diffusion for instance, appearing in mirror symmetric turbulence. This paper points out a new dynamo effect arising in convective cells with strong asymmetry in the rotation of updrafts as against downdrafts. The creation of new magnetic flux arises from the ejection of reserve flux through the open boundary of the dynamo region. It is unlike the familiar alpha-effect in that individual components of the field may be amplified independently. Several formal examples are provided to illustrate the effect. Occurrence in nature depends upon the existence of fluid rotations of the order of pi in the convective updrafts. The flux ejection dynamo may possibly contribute to the generation of field in the convective core of earth and in the convective zone of the sun and other stars.

Parker, E. N.↗

Numerical solution of the problem of flame propagation by the use of the random element method

A numerical, grid-free algorithm is presented for one-dimensional reaction-diffusion model of laminar flame propagation in premixed gases. It is based on the random element method we developed for the analysis of diffusional processes. The effect of combustion is taken into account by applying the principle of fractional steps to separate the process of diffusion, modeled by the random walk of computational elements, from the exothermic effects of chemical reaction, monitoring their strength. The validity of the algorithm is demonstrated by application to flame propagation problems for which exact solutions exist. The flame speed evaluated by its use oscillates around the exact value at a relatively small amplitude, while the temperature and species concentration profiles are self-correcting in their convergence to the exact solution. A satisfactory resolution is obtained by the use of quite a small number of computational elements which automatically adjust their distribution of fit sharp gradients.

Ghoniem, A. F.↗

Three-dimensional modelling of horizontal chemical vapor deposition. I - MOCVD at atmospheric pressure

A systematic numerical study of the MOCVD of GaAs from trimethylgallium and arsine in hydrogen or nitrogen carrier gas at atmospheric pressure is reported. Three-dimensional effects are explored for CVD reactors with large and small cross-sectional aspect ratios, and the effects on growth rate uniformity of tilting the susceptor are investigated for various input flow rates. It is found that, for light carrier gases, thermal diffusion must be included in the model. Buoyancy-driven three-dimensional flow effects can greatly influence the growth rate distribution through the reactor. The importance of the proper design of the lateral thermal boundary conditions for obtaining layers of uniform thickness is emphasized.

Ouazzani, Jalil↗

Effects of high doping levels silicon solar cell performance

The significance of the heavy doping effects (HDE) on the open-circuit voltage of silicon solar cells is assessed. Voltage calculations based on diffusion theory are modified to include the first order features of the HDE. Comparisions of the open-circuit voltage measured for cells of various base resistivities are made with those calculated using the diffusion model with and without the HDE. Results indicate that the observed variation of voltage with base resistivity is predicted by these effects. A maximum efficiency of 19% (AM0) and a voltage of 0.7 volts are calculated for 0.1 omega-cm cells assuming an optimum diffused layer impurity profile.

Godlewski, M. P.↗

Local effects of gravity wave propagation and saturation

In recent years, gravity waves were recognized to play a major role in the dynamics of the middle atmosphere. Perhaps the major effect of such motions are the reversal of the vertical shear of the mean zonal wind and the occurrence of a large turbulent diffusivity in the mesosphere due to gravity wave saturation. Yet, despite the importance of these gravity wave effects, the processes and the consequences of gravity wave propagation and saturation are only beginning to be understood in detail. The linear saturation theory predicts drag and turbulent diffusion due to saturating wave motion. This theory, however, fails to address a number of issues that are certain to be important for gravity wave propagation and saturation in the middle atmosphere. These issues, including wave transience, wave superposition, local convective adjustment, and nonlinearity, are discussed.

Fritts, D. C.↗