Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ELONGATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Ground-state and excited-state structures of tungsten-benzylidyne complexes

The molecular structure of the tungsten-benzylidyne complex trans-W({triple_bond}CPh)(dppe){sub 2}Cl (1; dppe = 1,2-bis(diphenylphosphino)ethane) in the singlet (d{sub xy}){sup 2} ground state and luminescent triplet (d{sub xy}){sup 1}({pi}*(WCPh)){sup 1} excited state (1*) has been studied using X-ray transient absorption spectroscopy, X-ray crystallography, and density functional theory (DFT) calculations. Molecular-orbital considerations suggest that the W-C and W-P bond lengths should increase in the excited state because of the reduction of the formal W-C bond order and decrease in W {yields} P {pi}-backbonding, respectively, between 1 and 1*. This latter conclusion is supported by comparisons among the W-P bond lengths obtained from the X-ray crystal structures of 1, (d{sub xy}){sup 1}-configured 1{sup +}, and (d{sub xy}){sup 2} [W(CPh)(dppe){sub 2}(NCMe)]{sup +} (2{sup +}). X-ray transient absorption spectroscopic measurements of the excited-state structure of 1* reveal that the W-C bond length is the same (within experimental error) as that determined by X-ray crystallography for the ground state 1, while the average W-P/W-Cl distance increases by 0.04 {angstrom} in the excited state. The small excited-state elongation of the W-C bond relative to the M-E distortions found for M({triple_bond}E)L{sub n} (E = O, N) compounds with analogous (d{sub xy}){sup 1}({pi}*(ME)){sup 1} excited states is due to the {pi} conjugation within the WCPh unit, which lessens the local W-C {pi}-antibonding character of the {pi}*(WCPh) lowest unoccupied molecular orbital (LUMO). These conclusions are supported by DFT calculations on 1 and 1*. The similar core bond distances of 1, 1{sup +}, and 1* indicates that the inner-sphere reorganization energy associated with ground- and excited-state electron-transfer reactions is small.

36 MATERIALS SCIENCE↗

Antibacterial Optimization of 4-Aminothiazolyl Analogues of the Natural Product GE2270 A: Identification of the Cycloalkylcarboxylic Acids

4-Aminothiazolyl analogues of the antibiotic natural product GE2270 A (1) were designed, synthesized, and optimized for their activity against Gram positive bacterial infections. Optimization efforts focused on improving the physicochemical properties (e.g., aqueous solubility and chemical stability) of the 4-aminothiazolyl natural product template while improving the in vitro and in vivo antibacterial activity. Structure-activity relationships were defined, and the solubility and efficacy profiles were improved over those of previous analogues and 1. These studies identified novel, potent, soluble, and efficacious elongation factor-Tu inhibitors, which bear cycloalkylcarboxylic acid side chains, and culminated in the selection of development candidates amide 48 and urethane 58.

60 APPLIED LIFE SCIENCES↗

Diphthamide biosynthesis requires an organic radical generated by an iron-sulphur enzyme

Archaeal and eukaryotic translation elongation factor 2 contain a unique post-translationally modified histidine residue called diphthamide, which is the target of diphtheria toxin. The biosynthesis of diphthamide was proposed to involve three steps, with the first being the formation of a C-C bond between the histidine residue and the 3-amino-3-carboxypropyl group of S-adenosyl-l-methionine (SAM). However, further details of the biosynthesis remain unknown. Here we present structural and biochemical evidence showing that the first step of diphthamide biosynthesis in the archaeon Pyrococcus horikoshii uses a novel iron-sulphur-cluster enzyme, Dph2. Dph2 is a homodimer and each of its monomers can bind a [4Fe-4S] cluster. Biochemical data suggest that unlike the enzymes in the radical SAM superfamily, Dph2 does not form the canonical 5'-deoxyadenosyl radical. Instead, it breaks the C γ,Met -S bond of SAM and generates a 3-amino-3-carboxypropyl radical. Our results suggest that P. horikoshii Dph2 represents a previously unknown, SAM-dependent, [4Fe-4S]-containing enzyme that catalyses unprecedented chemistry.

59 BASIC BIOLOGICAL SCIENCES↗

High pressure transition in amorphous As{sub 2}S{sub 3} studied by EXAFS

We report an in situ high pressure investigation of the structural change in vitreous As{sub 2}S{sub 3} up to 60 GPa using the diamond anvil cell and energy dispersive x-ray absorption spectroscopy. The main finding of the present study is a gradual elongation of the average As-S bond length, which takes place in the pressure range of 15-50 GPa. This change is interpreted as a signature of the coordination number increase around As atoms. The negative shift of the As K absorption edge position confirms the progressive metallization of the glass at high pressure. The observed changes are reversible after pressure release.

36 MATERIALS SCIENCE↗

'One size fits all' analytic solutions to the Grad-Shafranov equation

An extended analytic solution to the Grad-Shafranov equation using Solov'ev profiles is presented. The solution describes standard tokamaks, spherical tokamaks, spheromaks, and field reversed configurations. It allows arbitrary aspect ratio, elongation, and triangularity as well as a plasma surface that can be smooth or possess a double or single null divertor X-point. The solution can also be used to evaluate the equilibrium beta limit in a tokamak and spherical tokamak in which a separatrix moves onto the inner surface of the plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Tracking Nonradial Motions and Azimuthal Expansions of Interplanetary CMEs with the Solar Mass Ejection Imager

The trajectories of interplanetary CMEs (ICMEs) are modified by their interactions with solar wind streams. These interactions can result in non-radial deflections of ICME trajectories and changes to their rates of azimuthal expansion. The Solar Mass Ejection Imager (SMEI), launched earlier in 2003 January, has provided heliospheric images of several hundred ICMEs during the declining portion of solar cycle 23. We selected three SMEI ICMEs, each traversing a range of solar elongation angles epsilon>20 deg. , and measured the time changes of their leading-edge profiles plotted against position angle, PA. The parabolic fits to those profiles yielded the propagation directions of the ICMEs as well as their leading-edge curvatures and time profiles. The selected ICMEs were associated with LASCO CMEs, so we tracked the PA variations in their propagation over 1 to 3-day periods. We found good fits for two of the ICMEs, but one yielded generally poor fits.

79 ASTRONOMY AND ASTROPHYSICS↗

A Coupled Meshless Technique/Molecular Dynamics Approach for Deformation Characterization of Mono-crystalline Metal

This paper presents a multiscale study using the coupled Meshless technique/Molecular Dynamics (M{sup 2}) for exploring the deformation mechanism of mono-crystalline metal (focus on copper) under uniaxial tension. In M{sup 2}, an advanced transition algorithm using transition particles is employed to ensure the compatibility of both displacements and their gradients, and an effective local quasi-continuum approach is also applied to obtain the equivalent continuum strain energy density based on the atomistic potentials and Cauchy-Born rule. The key parameters used in M{sup 2} are firstly investigated using a benchmark problem. Then, M{sup 2} is applied to the multiscale simulation for a mono-crystalline copper bar. It has found that the mono-crystalline copper has very good elongation property, and the ultimate strength and Young's modulus are much higher than those obtained in macro-scale.

36 MATERIALS SCIENCE↗

Different growth rates for catalyst-induced and self-induced GaN nanowires

The catalyst- and self-induced pathways of GaN nanowire growth by molecular beam epitaxy are compared. The catalyst-induced nanowires elongate faster than the self-induced ones and their growth rate is fully determined by the impinging N rate. The self-induced nanowire growth rate is identical on both Si(111) and Si(001) and approaches the impinging N rate only for the few longest nanowires. This difference is attributed to the presence of the Ni-catalyst which enhances the incorporation of Ga at the nanowire tip while for the self-induced nanowires, growth is limited by the different incorporation rates on the nanowire tip and sidewall facets.

36 MATERIALS SCIENCE↗

An interrupted tensile testing at high strain rates for pure copper bars

A high-speed tensile facility (HSTF) invented by us was applied to interrupting the tests for pure copper specimen bars controlled locally at different levels of elongation. It was realized to isolate and identify the different stages of the dynamic fracture process of the pure copper specimen bar under impact tension. The results of scanning electron microscopical (SEM) investigation of the recovered pure copper specimens show that the void evolution near the surface of the minimum cross-section of the necking area is more severe than that at the middle of the necking area, which may be connected with the findings discussed by Alves and Jones [J. Mech. Phys. Solids 47, 643 (1999)]. The constitutive models in a certain range of strain determined from the tensile split Hopkinson bar optimized by us were employed and adjusted in numerically simulating the large deformation of the pure copper specimen in the interrupted tensile tests on HSTF. The dependence of the instability strain of thermoviscoplastic materials in simple tension on material parameters delineated by Batra and Wei [Int. J. Impact Eng. 34, 448 (2007)] was inspected in predicting the diffuse necking of the specimen bar. The axisymmetric necking rod model with a central void under static tension presented by Ragab [Eng. Fract. Mech. 71, 1515 (2004)] was extended to predicting the local necking and fracture of the specimen bar under impact tension.

42 ENGINEERING↗

Ion beam-assisted pulsed laser deposition of (Ba,Sr)(Ti,Zr)O{sub 3} films on Pt-Si substrates

Ion beam-assisted pulsed laser deposition with an Ar-oxygen ion mixture was used to prepare Ba{sub 0.6}Sr{sub 0.4}Ti{sub 0.7}Zr{sub 0.3}O{sub 3} (BSTZ) thin films on Pt-coated Si substrates. The ion beam with an anode voltage of 600 V was effective to reduce the thermal budget, i.e., to achieve similar crystallinity with approximately 100 deg. C lower deposition temperature compared to the cases without ionization. It was revealed that the dielectric properties (relative dielectric constant {epsilon}{sub r} and its electric field tunability), out-of-plane lattice parameter of (001)-oriented grains (a{sub 001}), and the existence of (110)-oriented grains are correlated with one another. Elongation of a{sub 001} was suppressed, resulting in large {epsilon}{sub r} values comparable with that of a ceramic bulk of the same composition, in the BSTZ films that contain (110)-oriented grains. Less volume of amorphous BSTZ region is supposed to be playing an important role for the bulklike properties of these BSTZ films.

36 MATERIALS SCIENCE↗

Effect of Grain Refinement on the Mechanical Behaviour of an Al6061 Alloy at Cryogenic Temperatures

A solution treated coarse grained (CG) Al6061 was subjected to high pressure torsion (HPT) at room temperature resulting in the formation of a homogeneous ultra-fine grained (UFG) microstructure with an average grain size of 170 nm. Tensile tests were performed at room temperature (RT) and liquid nitrogen temperature (LNT). The as-HPT UFG Al6061 alloy shows an increased strength at both RT and LNT. The decrease of testing temperature results in increased flow stress and in enhanced elongation to failure in both CG and UFG samples. The ratio {sigma}{sub y}{sup LNT}/{sigma}{sub y}{sup RT} was found to be larger for the CG Al6061 than for the UFG Al6061. Both surface relief and fracture surface observations were performed. The effect of the grain size and of the testing temperature on the mechanical behaviour of the Al6061 alloy is analyzed in detail. It is suggested that the solute atoms play an important role in the plastic deformation of the UFG Al6061 alloy.

36 MATERIALS SCIENCE↗

Cold work study on a 316LN modified alloy for the ITER TF coil conduit

The primary structural component of the cable-in-conduit conductor (CICC) magnets, such as the ITER TF coils is the conduit. This function creates requirements for 4 K strength, toughness, fatigue crack resistance, and ductility after exposure to the superconductor's reaction heat treatment. The tensile ductility of a steel is a quality factor related to fatigue and fracture resistance that can be evaluated more economically with tensile tests rather than fatigue and fracture tests. We subject 316LN modified base metal and welds to a range of cold work from 0% to 20% and a subsequent Nb 3 Sn reaction heat treatment to evaluate the effects on the tensile properties. With the addition of cold work, the 4 K yield strength increases while tensile elongation decreases in both the base metal and weld. Our results are compared to previously published data on the same alloy to evaluate the use of tensile ductility parameters as a materials qualification specification in magnet design.

36 MATERIALS SCIENCE↗

Visible imaging and spectroscopy of disruption runaway electrons in DIII-D

The first visible light images of synchrotron emission from disruption runaway electrons are presented. The forward-detected continuum radiation from runaways is identified as synchrotron emission by comparing two survey spectrometers and two visible fast cameras viewing in opposite toroidal directions. Analysis of the elongation of 2D synchrotron images of oval-shaped runaway beams indicates that the velocity pitch angle v{sub Up-Tack }/v{sub ||} ranges from 0.1 to 0.2 for the detected electrons, with energies above 25 MeV. Analysis of synchrotron intensity from a camera indicates that the tail of the runaway energy distribution reaches energies up to 60 MeV, which agrees with 0D modeling of electron acceleration in the toroidal electric field generated during the current quench. A visible spectrometer provides an independent estimate of the upper limit of runaway electron energy which is roughly consistent with energy determined from camera data. Synchrotron spectra reveal that approximately 1% of the total post-thermal quench plasma current is carried by the detected high-energy runaway population with energies in the range of 25-60 MeV; the bulk of the plasma current thus appears to be carried by relativistic electrons with energy less than 25 MeV. In addition to stable oval shapes, runaway beams with other shapes and internal structure are sometimes observed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Microwires fabricated by glass-coated melt spinning

The glass-coated melt spinning method offers a route for the manufacture of metal filaments with a few micrometers in diameter in a single operation directly from the melt. Cobalt-based amorphous wires, Cu-15.0 atomic percent (at. %) Sn shape-memory wires, and Ni{sub 2}MnGa (atomic percent) ferromagnetic wires were successfully produced by this method. The cobalt-based amorphous wire is flexible, and Cu-15.0 at. % Sn shape-memory wires have the tensile elongation of 14%. However, because of chemical reaction with glass and oxidation, it is hard to make Cu–Al–Ni shape-memory wires and Ni–Nb–Sn amorphous wires. Conditions for preparing these materials were summarized, and the differences of the solidification processes among glass-coated amorphous cobalt-based wires, Cu-15.0 at. % Sn shape-memory wires, and Ni{sub 2}MnGa wires were analyzed and discussed.

36 MATERIALS SCIENCE↗

Magnetic properties of Mn{sub 3}O{sub 4} film under compressive stress grown on MgAl{sub 2}O{sub 4} (001) by molecular beam epitaxy

High quality single-crystalline Mn{sub 3}O{sub 4} thin films were grown on MgAl{sub 2}O{sub 4} (001) substrates by plasma-assisted molecular beam epitaxy. It is found that the films are compressed in the (001) plane and elongated in the perpendicular direction via in-situ reflection high-energy electron diffraction and ex-situ X-ray diffraction, which is confirmed by frequency hardening of relevant Raman bands. Different from the bulk, the epitaxial film with a thickness of 65 nm shows more obvious magnetic anisotropy and higher magnetic phase transition temperatures (T{sub N} = 50 K, T{sub 1} = 40.5 K, and T{sub 2} = 36 K) than that of the bulk (T{sub N} = 42 K, T{sub 1} = 39 K, and T{sub 2} = 33 K). The variation of magnetic properties could be attributed to the changes of interplay among spin, orbital, and lattice degrees of freedom owing to the residual strain in the epitaxial film.

36 MATERIALS SCIENCE↗

The effects of plasma shape control on the edge collisionless ion orbit loss

Double null magnetic configurations with different elongation κ and triangularity δ are constructed by using an analytical solution of the Grad–Shafranov equation. The ion orbit losses in plasma edge region are calculated by solving the ion guiding center orbit equation for different values of κ and δ. It is found that the ion orbit loss is larger for a smaller value of κ or δ. The variation of the ion orbit loss fraction on the magnetic surface is also studied.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Influence of the group V element on the chemical potential and crystal structure of Au-catalyzed III-V nanowires

We present a kinetic growth model having a particular emphasis on the influence of the group V element on the preferred crystal structure of Au-catalyzed III-V nanowires. The model circumvents the uncertainty in the group V contribution into the overall liquid chemical potential. We show why the nanowire elongation rate is limited by the group III transport, while the crystal structure depends on the effective group V to III imbalance. Within the model, we are able to explain some important structural trends in Au-catalyzed III-V nanowires. In particular, we show that high group V flux always favors wurtzite structure in molecular-beam epitaxy. This tendency could be inverted in vapor deposition techniques due to suppression of the group III diffusion at high group V flux.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗