Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ELECTROMAGNETIC INSTRUMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Polarization Filter for Microstrip Lumped-Element Kinetic Inductance Detectors

Polarization sensitivity is a major requirement in future cosmic microwave background studies. Even though lumped-element kinetic inductance detectors (LEKIDs) have already demonstrated a good performance in the millimeter range, the typical configuration based on linear meander inductors exhibits a cross polarization up to 30%. In this work, we propose a new configuration of LEKIDs coupled to a microstrip transmission line where the continuous ground plane has been replaced with parallel lines in order to be used as a polarizing grid. Microwave simulations and preliminary experiments show that the polarizer acts as an effective ground plane with no influence in the electromagnetic performance and that the cross polarization can be decreased to 3%.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The Mu2e crystal calorimeter

The Mu2e Experiment at Fermilab will search for coherent, neutrino-less conversion of negative muons into electrons in the field of an Aluminum nucleus, $\mu^- + Al \to e^- +Al$. Data collection start is planned for the end of 2021. The dynamics of such charged lepton flavour violating (CLFV) process is well modelled by a two-body decay, resulting in a mono-energetic electron with an energy slightly below the muon rest mass. If no events are observed in three years of running, Mu2e will set an upper limit on the ratio between the conversion and the capture rates %\convrate of $\leq 6\ \times\ 10^{-17}$ (@ 90$\%$ C.L.). R$_{\mu e} = \frac{\mu^- + A(Z,N) \to e^- +A(Z,N)}{\mu^- + A(Z,N) \to \nu_{\mu} ^- +A(Z-1,N)} $ of $\leq 6\ \times\ 10^{-17}$ (@ 90$\%$ C.L.). This will improve the current limit of four order of magnitudes with respect to the previous best experiment. Mu2e complements and extends the current search for $\mu \to e \gamma$ decay at MEG as well as the direct searches for new physics at the LHC. The observation of such CLFV process could be clear evidence for New Physics beyond the Standard Model. Given its sensitivity, Mu2e will be able to probe New Physics at a scale inaccessible to direct searches at either present or planned high energy colliders. To search for the muon conversion process, a very intense pulsed beam of negative muons ($\sim 10^{10} \mu/$ sec) is stopped on an Aluminum target inside a very long solenoid where the detector is also located. The Mu2e detector is composed of a straw tube tracker and a CsI crystals electromagnetic calorimeter. An overview of the physics motivations for Mu2e, the current status of the experiment and the required performances and design details of the calorimeter are presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Optimal optoacoustic detector design

Optoacoustic detectors are used to measure pressure changes occurring in enclosed gases, liquids, or solids being excited by intensity or frequency modulated electromagnetic radiation. Radiation absorption spectra, collisional relaxation rates, substance compositions, and reactions can be determined from the time behavior of these pressure changes. Very successful measurements of gaseous air pollutants have, for instance, been performed by using detectors of this type together with different lasers. The measuring instrument consisting of radiation source, modulator, optoacoustic detector, etc. is often called spectrophone. In the present paper, a thorough optoacoustic detector optimization analysis based upon a review of its theory of operation is introduced. New quantitative rules and suggestions explaining how to design detectors with maximal pressure responsivity and over-all sensitivity and minimal background signal are presented.

Rosengren, L.-G.↗

Towards Non-Intrusive Real-Time Monitoring of Behind the Meter Residential Distributed Energy Resources

The growing adoption of residential distributed energy resources (DERs) introduces more uncertain variability in power grid operation. More importantly, the residential DERs operate behind customers’ energy meters, and therefore, the utility cannot “directly” monitor them. Prior approaches to enable visibility into behind-the-meter (BTM) DERs either depend on estimations or require intrusive instrumentation on the customer side. To address the critical need for direct real-time monitoring of BTM DERs, in this paper, we propose a novel approach for utility-side direct real-time monitoring of residential BTM DERs. We utilize high-frequency (> 10kHz) conducted electromagnetic interference (EMI) from residential DERs’ grid-tied inverters to monitor their power generation. We discuss the working principle of our approach and present supporting results using three of-the-shelf grid-tied inverters.

14 SOLAR ENERGY↗

Operation of the prospective beamline calorimeter in the high-radiation forward environment of the international linear collider

Results on electromagnetically-induced radiation damage to silicon diode sensors, obtained from the T506 experiment at SLAC, are used in concert with detailed shower simulations to project the effects of radiation damage on the proposed International Linear Collider Beamline Calorimeter (BeamCal) detector system. The study makes use of the FLUKA Monte Carlo to simulate electromagnetic showers in both the T506 apparatus and the prospective BeamCal detector system. Under the conservative assumption that damage leading to sensor leakage currents is dominated by the neutron component of the electromagnetic shower, and assuming that resulting leakage currents depend linearly on neutron fluence, the power consumption required to operate the BeamCal detector at a temperature of -10° C would be expected to increase by approximately 100 W per year of operation. Lowering the operating temperature to -30° C would be expected to reduce the growth in power consumption to approximately 10 W per year. Under other assumptions about the source of damage, the accumulated power draw would be expected to be significantly less. Results on fluences of both electromagnetic and hadronic particles in regions peripheral to the bulk of the BeamCal detector system, where front-end electronics would be mounted, are also presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Gamma-ray superconducting detector based on Abrikosov vortices: Principle of operation

The high atomic number of some superconducting elements such as niobium (Z=41) and tantalum (Z=73) and a high material thickness (e.g., t=300 mum) are emphasized as essential properties for development of a gamma-ray solid state detector with high intrinsic detection efficiency in the energy range up to 100 keV. To exploit these properties, a new detection principle based on the interaction of a single gamma-ray photon with Abrikosov vortex is proposed. The interaction of gamma-ray photon with a superconductor is discussed in terms of the photoelectric absorption and a hot-spot formation, the last acts as a short-time pinning center on an Abrikosov vortex and activates its motion, namely, a jump or damped vibration. Both types of vortex motion lead to variation (either static or dynamic) in the magnetic field on the absorber surface. The high sensitivity of the Josephson tunneling to weak magnetic field can be exploited for revealing the magnetic field variation and to make the readout of the detector. Main intrinsic properties of a gamma-ray detector based on Abrikosov vortices are evaluated, including the possibility to measure the energy deposited in the detector. A single Josephson tunnel junction configuration or a superconducting quantum interference device (SQUID) configuration is proposed and discussed as possible realization of working gamma-ray detector both in the counter operation mode and in the radiation spectroscopy operation mode.

36 MATERIALS SCIENCE↗

Forward Region Studies for ILC

Systematic effects in precision luminosity measurement at the International Linear Collider are discussed. In particular, beam-beam interaction effects, background from physics processes, and effect of bias and resolution of measured energy in the luminosity calorimeter. Simulation is done at 500 GeV and 1 TeV center of mass energy. Some prospects at 3 TeV are also discussed for the CLIC case.

43 PARTICLE ACCELERATORS↗

Cryogenic Undulator for a Table Top FEL

A laser plasma accelerator is under development at the Max-Planck-Institut fuer Quantenoptik in Garching. This accelerator will be part of an X-ray table top FEL in the future. The FEL radiation will be produced with a small period in-vacuum undulator. The coercivity of the magnetic material has to be sufficiently high in order to avoid demagnetization due to electron losses. The best performance can be achieved with a cryogenic permanent magnet undulator design. (Nd{sub 0.2}Pr{sub 0.8}){sub 2}Fe{sub 14}B magnets are suited for low temperatures since they do not suffer from a spin reorientation. A new (Nd{sub 0.2}Pr{sub 0.8}){sub 2}Fe{sub 14}B material has been characterized at various temperatures and the results are presented. Based on this material a 20 period prototype with a period length of 9 mm and a magnetic gap of 2.5 mm is currently under construction.

36 MATERIALS SCIENCE↗

Cascade Spectroscopy and Recent {Xi}* Photo-production Results from CLAS

Doubly-strange baryon resonances provide new insights into baryon structure. The standard QCD Lagrangian implies that for every N* and {Delta}* resonance, there should be a corresponding {Xi}(cascade resonance). This is due to the flavor symmetry of the strong force. Therefore, one can investigate baryon structure by observing aspects of the doubly-strange baryons like regularities such as parity doublets. At energies above approximately 1.5 GeV, the light-quark baryon resonances are broad and overlap while the cascades in this range are narrow and therefore more readily observed. An overview of the world cascade spectrum and a comparison to the lighter baryon spectra will be presented. Recent results from an on-going analysis from the G12 (5.4 GeV) photo-production experiment using the CLAS detector at JLab will be highlighted.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Observation and numerical analysis of plasma parameters in a capillary discharge-produced plasma channel waveguide

We observed the parameters of the discharge-produced plasma in cylindrical capillary. Plasma parameters of the waveguide were investigated by use of both a Normarski laser interferometer and a hydrogen plasma line spectrum. A space-averaged maximum temperature of 3.3 eV with electron densities of the order of 10{sup 17} cm{sup -3} was observed at a discharge time of 150 ns and a maximum discharge current of 200 A. One-dimensional dissipative magnetohydrodynamic (MHD) code was used to analyze the discharge dynamics in the gas-filled capillary discharge waveguide for high-intensity laser pulses. Simulations were performed for the conditions of the experiment. We compared the temporal behavior of the electron temperature and the radial electron density profiles, measured in the experiment with the results of the numerical simulations. They occurred to be in a good agreement. An ultrashort, intense laser pulse was guided by use of this plasma channel.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A New Facility For Non-Destructive Assay With A Time-Tagged {sup 252}Cf Source

A new facility for Non-Destructive Assay based on a time-tagged {sup 252}Cf spontaneous fission source is now in operation at the Padova University. The system is designed to analyze samples with dimensions on the order of 20x20 cm{sup 2}, the material recognition being obtained by measuring simultaneously transmission of neutrons and gamma rays as a function of energy.

43 PARTICLE ACCELERATORS↗

Exclusive {pi}{sup 0},{eta} electroproduction in the resonance region at high Q{sup 2}

We present preliminary results from {pi}{sup 0} and {eta} electroproduction data taken with CLAS at Jefferson Lab. These and other CLAS measurements, coupled with recent theoretical developments, will allow non-perturbative approaches to shed lights on the role of quarks and gluons in nuclei and address issues such as confinement and the non-zero quark mass in the chiral limit.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the {gamma}p{yields}{eta}p Reaction with the Crystal Ball Detector at the Mainz Microtron (MAMI-C)

The {gamma}p{yields}{eta}p reaction has been measured with the Crystal Ball and TAPS multiphoton spectrometers in the energy range from the production threshold to 1.4 GeV (1.49{<=}W{<=}1.87 GeV). Bremsstrahlung photons produced by the 1.5-GeV electron beam of the Mainz Microtron MAMI-C and momentum analyzed by the Glasgow Tagging Spectrometer were used for the {eta}-meson production. Our accumulation of 3.8x10{sup 6} {gamma}p{yields}{eta}p{yields}3{pi}{sup 0}p{yields}6{gamma}p events allows a detailed study of the reaction dynamics. The {gamma}p{yields}{eta}p differential cross sections were determined for 120 energy bins and the full range of the production angles. Our data show a dip near W = 1680 MeV in the total cross section related to a substantial dip in {eta} production at forward angles. The data are compared to predictions of previous SAID and MAID partial-wave analyses and to the latest SAID and MAID fits that included our data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Ray-wave approximation for calculating laser radiation scattering by a transparent dielectric spheroidal particle

A theoretical model is developed and an algorithm is proposed for calculating far-field light scattering by a transparent dielectric particle significantly larger than a wavelength. The accuracy of this algorithm is close to that of the discrete dipole approximation. The calculation time for this algorithm in the case of particles with the size parameter higher than 50 is much lower than that for the discrete dipole approximation. Scattering diagrams for spheroidal particles of different sizes, orientations and refractive indices are calculated. The proposed algorithm has a great potential for quick calculations of parameters of light scattering by large biological particles such as erythrocytes and their aggregates, bacteria, etc. (special issue devoted to application of laser technologies in biophotonics and biomedical studies)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Effect of the pump rate and loss perturbations on the lasing dynamics of a Fabry-Perot laser

Transition from generation of the fundamental mode to generation of the fundamental and first modes is studied numerically under the action of nonstationary asymmetric perturbations of pump rate and loss distributions in the active medium layer. It is shown that emergence of perturbations directly leads to excitation of the first mode with significant amplitude. The regime of two-mode lasing in the presence of perturbations is shown to appear at a pump rate that is smaller than the threshold one for two-mode lasing in the absence of perturbations. It is found that the first-mode amplitude has a maximum at a frequency of intermode beatings of an unfilled Fabry-Perot resonator. It is also determined that emergence of nonstationary asymmetric perturbations leads to an increase in the average intensity of the fundamental mode. Various transition regimes to two-mode lasing are compared in different types and periods of perturbations. The operability of the scheme controlling the mode composition of laser radiation is considered. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

On the possibility of using the dynamic Franz - Keldysh effect to detect the parameters of high-power IR laser radiation

The increase in the absorption of light by a semiconductor (when the light photon energy is somewhat smaller than the semiconductor bandgap or equals it) in the presence of a strong light wave (for which the semiconductor is transparent) has been investigated. The possibility of designing novel light detectors for measuring the energy parameters and spatial and temporal characteristics of high-power IR laser radiation is demonstrated. (measurement of laser radiation parameters)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

GRAVITATIONAL-WAVE SPIN-DOWN AND STALLING LOWER LIMITS ON THE ELECTRICAL RESISTIVITY OF THE ACCRETED MOUNTAIN IN A MILLISECOND PULSAR

The electrical resistivity of the accreted mountain in a millisecond pulsar is limited by the observed spin-down rate of binary radio millisecond pulsars (BRMSPs) and the spins and X-ray fluxes of accreting millisecond pulsars (AMSPs). We find {eta}{>=}10{sup -28} s ({tau}{sub SD}/1 Gyr){sup -0.8} (where {tau}{sub SD} is the spin-down age) for BRMSPs and {eta}{>=}10{sup -25} s ( M-dot{sub a}/ M-dot{sub E}){sup 0.6} (where M-dot{sub a} and M-dot{sub E} are the actual and Eddington accretion rates) for AMSPs. These limits are inferred assuming that the mountain attains a steady state, where matter diffuses resistively across magnetic flux surfaces but is replenished at an equal rate by infalling material. The mountain then relaxes further resistively after accretion ceases. The BRMSP spin-down limit approaches the theoretical electron-impurity resistivity at temperatures {approx_gt}10{sup 5} K for an impurity concentration of {approx}0.1, while the AMSP stalling limit falls 2 orders of magnitude below the theoretical electron-phonon resistivity for temperatures above 10{sup 8} K. Hence, BRMSP observations are already challenging theoretical resistivity calculations in a useful way. Next-generation gravitational-wave interferometers will constrain {eta} at a level that will be competitive with electromagnetic observations.

79 ASTRONOMY AND ASTROPHYSICS↗

Convolutional L2LFlows: generating accurate showers in highly granular calorimeters using convolutional normalizing flows

Abstract In the quest to build generative surrogate models as computationally efficient alternatives to rule-based simulations, the quality of the generated samples remains a crucial frontier. So far, normalizing flows have been among the models with the best fidelity. However, as the latent space in such models is required to have the same dimensionality as the data space, scaling up normalizing flows to high dimensional datasets is not straightforward. The prior L2LFlows approach successfully used a series of separate normalizing flows and sequence of conditioning steps to circumvent this problem. In this work, we extend L2LFlows to simulate showers with a 9-times larger profile in the lateral direction. To achieve this, we introduce convolutional layers and U-Net-type connections, move from masked autoregressive flows to coupling layers, and demonstrate the successful modelling of showers in the ILD Electromagnetic Calorimeter as well as Dataset 3 from the public CaloChallenge dataset.

Instruments & Instrumentation↗