Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Drives”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Reversible to irreversible transitions for cyclically driven particles on periodic obstacle arrays

Here, we examine the collective dynamics of disks moving through a square array of obstacles under cyclic square wave driving. Below a critical density, we find that the system organizes into a reversible state in which the disks return to the same positions at the end of every drive cycle. Above this density, the dynamics are irreversible and the disks do not return to the same positions after each cycle. The critical density depends strongly on the angle θ between the driving direction and a symmetry axis of the obstacle array, with the highest critical densities appearing at commensurate angles such as θ = 0° and θ = 45° and the lowest critical densities falling at θ = arctan (0.618), the inverse of the golden ratio, where the flow is the most degenerate. As the density increases, the number of cycles required to reach a reversible state grows as a power law with an exponent near ν = 1.36, similar to what is found in periodically driven colloidal and superconducting vortex systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Simulating the non-monotonic strain response of nanoporous multiferroic composites under electric field control

In this work, we simulate and analyze the mechanical response of a class of multiferroic materials consisting of a templated porous nanostructure made out of cobalt ferrite (CFO) partially filled by atomic layer deposition (ALD) with a ferroelectric phase of lead zirconate titanate (PZT). The strain in the device is measured when an electric field is applied for varying ALD thicknesses, displaying a non-monotonic dependence with a maximum strain achieved for a coating thickness of 3 nm. To understand this behavior, we apply finite element modeling to the smallest repeatable unit of the nanoporous template and simulate the mechanical response as a function of PZT coating thickness. We find that this non-monotonic response is caused by the interplay between two driving forces opposing one another. First, increased porosity works toward increasing the strain due to a reduced system stiffness. Second, decreased porosity involves a larger mass fraction of PZT, which drives the electro-mechanical response of the structure, thus leading to a larger strain. The balance between these two driving forces is controlled by the shear coupling at the CFO/PZT interface and the effective PZT cross section along the direction of the applied electric field. Here, our numerical results show that considering a nonlinear piezoelectric response for PZT leads to an improved agreement with the experimental data, consistent with ex situ poling of the nanostructure prior to magnetic measurements.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Role of hot electrons in shock ignition constrained by experiment at the National Ignition Facility

Shock ignition is a scheme for direct drive inertial confinement fusion that offers the potential for high gain with the current generation of laser facility; however, the benefits are thought to be dependent on the use of low adiabat implosions without laser–plasma instabilities reducing drive and generating hot electrons. A National Ignition Facility direct drive solid target experiment was used to calibrate a 3D Monte Carlo hot-electron model for 2D radiation-hydrodynamic simulations of a shock ignition implosion. The α = 2.5 adiabat implosion was calculated to suffer a 35% peak areal density decrease when the hot electron population with temperature T ℎ = 55 keV and energy E ℎ = 13 kJ was added to the simulation. Optimizing the pulse shape can recover ~1/3 of the peak areal density lost due to a change in shock timing. Here, despite the harmful impact of laser–plasma instabilities, the simulations indicate shock ignition as a viable method to improve performance and broaden the design space of near ignition high adiabat implosions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Pressure-driven tearing and thermal transport in finite-beta reversed field pinch computations

In this work, nonlinear resistive-magnetohydrodynamics (MHD) computation with heating and anisotropic transport is applied to examine the interaction between thermal energy and magnetic fluctuations in inductively driven reversed-field pinches (RFPs). The magnetic fluctuations underlie magnetic field reversal through dynamo-like correlations, and they enhance thermal energy transport through fluctuations of parallel heat flux density. With the unfavorable magnetic curvature that exists across the RFP profile, thermal energy also affects the magnetic fluctuations. Computations with the NIMROD code [Sovinec et al., J. Comput. Phys. 195, 355–386 (2004)] integrate nonlinear MHD dynamics with energy transport and reproduce an RFP state with experimentally relevant values of plasma-β. Equilibria constructed from results of the 3D computations are analyzed to assess the sources of free energy in the saturated nonlinear state. Linear computations for these profiles show unstable modes of tearing parity. Their eigenfunctions are used to evaluate and compare stabilizing and destabilizing contributions to the kinetic energy integral. An assessment of the drives in the integral reveals that the pressure gradient drive is of comparable magnitude to the parallel current drive, and only the sum of the two surpasses the stabilizing contributions. Correlation of magnetic and parallel heat flux density fluctuations in the nonlinear computations shows that fluctuation-induced thermal conduction is the dominant mode of energy loss, as expected from experimental evidence. Decomposition of the fluctuating heat flux density shows that second-order correlations, alone, do not explain the total energy transport. Higher-order correlations are also important.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Towards fast, accurate predictions of RF simulations via data-driven modeling: Forward and lateral models

Three machine learning techniques (multilayer perceptron, random forest, and Gaussian process) provide fast surrogate models for lower hybrid current drive (LHCD) simulations. A single GENRAY/CQL3D simulation without radial diffusion of fast electrons requires several minutes of wall-clock time to complete, which is acceptable for many purposes, but too slow for integrated modeling and real-time control applications. More accurate simulations with fast electron diffusion are even slower, requiring multiple hours of run time with parallel processing. The machine learning models use a database of 16,000+ GEN-RAY/CQL3D simulations for training, validation, and testing. Latin hypercube sampling methods implemented in πScope ensure that the database covers the range of 9 input parameters (n e0 , T e0 , I p , B t , R 0 , n ∥︀ , Z e f f , V loop , P LHCD ) with sufficient density in all regions of parameter space. The surrogate models reduce the computation time from minutes-hours to ms with high accuracy across the input parameter space. Data-driven surrogate models also allow for solving inverse and “lateral” problems. A surrogate model for the inverse problem maps from a desired current drive or power deposition profile to a set of input parameters that would result in such a profile, while a surrogate model for the lateral problem maps from a measured experimental quantity such as hard x-ray emission to a current drive or power deposition profile. In conclusion, the πScope database creation workflow is flexible and applicable to other RF simulation codes such as TORIC.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

The physics of gain relevant to inertial fusion energy target designs

In inertial confinement fusion, pellets of deuterium tritium fuel are compressed and heated to the conditions where they undergo fusion and release energy. The target gain (ratio of energy released from the fusion reactions to the energy in the drive source) is a key parameter in determining the power flow and economics of an inertial fusion energy (IFE) power plant. In this study, the physics of gain is explored for laser-direct-drive targets with driver energy at the megajoule scale. This analysis is performed with the assumption of next-generation laser technologies that are expected to increase convergent drive pressures to over 200 Mbar. This is possible with the addition of bandwidth to the laser spectrum and by employing focal-spot zooming. Simple physics arguments are used to derive scaling laws that describe target gain as a function of laser energy, adiabat, ablation pressure, and implosion velocity. Scaling laws are found for the unablated mass, ablation pressure, areal density, implosion velocity, and in-flight aspect ratio. Furthermore, those scaling laws are then used to explore the design space for IFE targets.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

High-magnification Faraday rotation imaging and analysis of X-pinch implosion dynamics

An X-pinch load driven by an intense current pulse (>100 kA in ~100 ns) can result in the formation of a small radius, runaway compressional micro-pinch. A micro-pinch is characterized by a hot (>1 keV), current-driven (>100 kA), high-density plasma column (near solid density) with a small neck diameter (1–10 µm), a short axial extent (<1 mm), and a short duration (≲1 ns). With material pressures often well into the multi-Mbar regime, a micro-pinch plasma often radiates an intense, sub-ns burst of sub-keV to multi-keV x rays. A low-density coronal plasma immediately surrounding the dense plasma neck could potentially shunt current away from the neck and thus reduce the magnetic drive pressure applied to the neck. Here, to study the current distribution in the coronal plasma, a Faraday rotation imaging diagnostic (1064 nm) capable of producing simultaneous high-magnification polarimetric and interferometric images has been developed for the MAIZE facility at the University of Michigan. Designed with a variable magnification (1–10×), this diagnostic achieves a spatial resolution of ~35 µm, which is useful for resolving the ~100-μm-scale coronal plasma immediately surrounding the dense core. This system has now been used on a reduced-output MAIZE (100–200 kA, 150 ns) to assess the radial distribution of drive current immediately surrounding the dense micro-pinch neck. The total current enclosed was found to increase as a function of radius, r, from a value of ≈ 50 ± 25 kA at r ≈ 140 µm (at the edge of the dense neck) to a maximal value of ≈150 ± 75 kA for r ≥ 225 µm. This corresponds to a peak magnetic drive pressure of ≈75 ± 50 kbar at r ≈ 225 µm. The limitations of these measurements are discussed in the paper.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Pop-up Langmuir probe diagnostic in the water cooled divertor of Wendelstein 7-X

The design, development, and successful implementation of pop-up Langmuir probes installed in the water-cooled divertor of W7-X are described. The probes are controlled by drive coils (actuators) installed behind the divertor plates. These drive coils make use of the magnetic field in W7-X to move the probe tips into and out of the plasma. The drive coils were installed in the vacuum vessel after extensively testing the durability of the coils and analyzing the criteria for safe operation. The probe design is carefully tailored for each of the 36 probe tips in order to be suitable for the different magnetic field configurations used in W7-X and ensure that the probes do not present leading edges to the magnetic flux tubes. An electronic bridge circuit is used for measurement to compensate for the effects of signal propagation time on the long cable lengths used. The diagnostic is integrated with the segment control of W7-X for automated operation and control of the diagnostic. The evaluation of the results from the plasma operation is presented after accounting for appropriate sheath expansion for negative bias voltage on the probes.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2026

Quantum kinetic modeling of KEEN waves in a warm-dense regime

We report the first fully kinetic, quantum study of kinetic electrostatic electron nonlinear (KEEN) waves, showing that quantum diffraction systematically erodes the classical trapping mechanism, narrows harmonic locking to the fundamental, and hastens post-drive decay. Electrons are evolved with a second-order Strang-split 1D1V Wigner–Poisson solver that couples conservative semi-Lagrangian WENO advection to an analytic Fourier space update for the non-local Wigner term, while ions remain classical. We focus on collisionless dynamics in a weakly coupled regime, providing a controlled baseline before collisional extensions. Short, frequency-tuned ponderomotive pulses drive KEEN formation in a uniform Maxwellian plasma; as the dimensionless quantum parameter H rises from the classical limit to values relevant to warm-dense matter, doped semiconductors, and 2D electron systems, the drive threshold increases, higher harmonics are damped, trapped electron vortices diffuse, and the subplasma electrostatic energy relaxes to a lower stationary level, as confirmed by continuous wavelet analysis. These microscopic changes carry macroscopic weight. Ignition-scale capsules now compress matter to regimes where the electron de Broglie wavelength rivals the Debye length, making classical kinetic descriptions insufficient. By extending KEEN physics into this quantum domain, our results offer a potential diagnostic of non-equilibrium electron dynamics for next-generation inertial-confinement designs and high-energy-density platforms, indicating that predictive fusion modeling may benefit from the integration of kinetic fidelity with quantum effects.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Studies of localized mix and asymmetry caused by the stalk in inertial fusion experiments at OMEGA

In an inertially confined fusion experiment, a capsule of fusion fuel is compressed to high temperatures and densities using lasers, creating a hot plasma in which thermonuclear fusion reactions take place. To achieve efficient conversion of laser energy to fuel heating, the implosion must be as spherically symmetric as possible. One common source of asymmetry that degrades performance is the stalk and glue spot that hold the capsule in place before the experiment. The exact nature and magnitude of this perturbation had not been previously quantified. In this work, inertially confined fusion experiments were executed with an additional stalk on the capsule to measure and quantify the effect of the stalk and glue spot on the symmetry and performance. It is found that the stalk drives low-mode asymmetry by shadowing the laser drive on the part of the shell near the glue spot, enhancing the hot-spot velocity toward the stalk by 40–80 km/s and elongating the hot-spot along the stalk axis. It is also found that localized mix due to the additional stalk has a negligible effect on implosion performance. Two-dimensional radiation-hydrodynamic simulations using the xRAGE code reproduce the direction of the experimentally observed change to hot-spot velocity and implosion performance metrics, but not the observed elongation, suggesting that this feature results from an interaction between stalk perturbations and other preexisting asymmetry seeds, such as laser drive asymmetry.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Entropic control of the free-energy landscape of an archetypal biomolecular machine

Biomolecular machines are complex macromolecular assemblies that utilize thermal and chemical energy to perform essential, multistep, cellular processes. Despite possessing different architectures and functions, an essential feature of the mechanisms of action of all such machines is that they require dynamic rearrangements of structural components. Surprisingly, biomolecular machines generally possess only a limited set of such motions, suggesting that these dynamics must be repurposed to drive different mechanistic steps. Although ligands that interact with these machines are known to drive such repurposing, the physical and structural mechanisms through which ligands achieve this remain unknown. Using temperature-dependent, single-molecule measurements analyzed with a time-resolution-enhancing algorithm, here, we dissect the free-energy landscape of an archetypal biomolecular machine, the bacterial ribosome, to reveal how its dynamics are repurposed to drive distinct steps during ribosome-catalyzed protein synthesis. Specifically, we show that the free-energy landscape of the ribosome encompasses a network of allosterically coupled structural elements that coordinates the motions of these elements. Moreover, we reveal that ribosomal ligands which participate in disparate steps of the protein synthesis pathway repurpose this network by differentially modulating the structural flexibility of the ribosomal complex (i.e., the entropic component of the free-energy landscape). Here, we propose that such ligand-dependent entropic control of free-energy landscapes has evolved as a general strategy through which ligands may regulate the functions of all biomolecular machines. Such entropic control is therefore an important driver in the evolution of naturally occurring biomolecular machines and a critical consideration for the design of synthetic molecular machines.

Science & Technology - Other Topics↗
DOE OSTI2025

Behavioral resilience via dynamic circuit firing homeostasis

Homeostatic regulation ensures stable neural circuit output under changing conditions. We find that in Drosophila larvae, either presynaptic weakening due to perturbation of transmitter release or postsynaptic weakening due to perturbation of glutamate receptors at synapses between motor neuron (MN) and muscle has little impact on locomotion, suggesting a nonsynaptic compensatory mechanism. In vivo imaging shows that five different forms of synaptic weakening increase the duration of activity bouts in type I MNs. Strikingly, this compensation is input selective: occurring only in the tonic type Ib MN, not the phasic type Is MN that innervates the same muscle. Moreover, an inhibitory class of central pre-MNs that innervates the tonic—but not phasic—input decreases in activity. The adjustment in activity occurs remarkably quickly: within minutes of synapse perturbation. We propose that MN firing is dynamically regulated by two coordinated mechanisms: a cell-autonomous adjustment of MN excitability and a circuit adjustment of inhibitory central drive. The input selectivity of this process suggests homeostatic adjustment to maintain tonic drive but hold constant the phasic drive that organizes locomotory wave patterns.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Interpretable Machine Learning for Characterizing Electric Vehicle Charging Behavior: Insights from Real-World Data

As electric vehicle (EV) adoption rises globally, concerns about the impact on aging electrical grids grow, particularly regarding the charging behavior of EV drivers. This study analyzes real-world driving and charging data from Ford battery electric vehicles (BEVs) collected between 2018 and 2019 to develop interpretable models that characterize charging behavior and quantify influencing factors. Prior research has relied on assumptions regarding driver behavior, often overlooking actual charging patterns. By employing generalized linear mixed models (GLMMs), this work offers insights into how various elements, such as next trip distance and state of charge (SOC), influence charging decisions. The dataset comprises over three million park-trip pairs from 1,997 vehicles, revealing that features related to driving behavior significantly dictate charging behavior, while infrastructure and regional factors have lesser impacts. The findings suggest that existing simulation models may oversimplify EV charging behavior assumptions. This work utilizes real-world EV driving and charging data to train interpretable models that describe charging behavior and quantify the factors most associated with how drivers use charging infrastructure. This research underscores the need for interpretable, data-driven methodologies to inform future EV infrastructure planning and grid management.

29 - ENERGY PLANNING, POLICY AND ECONOMY↗
DOE OSTI2025

Skyrmionium dynamics and stability on one dimensional anisotropy patterns

We examine a skyrmionium driven over a periodic anisotropy pattern, which consists of disorder free regions and disordered regions. For small defect densities, the skyrmionium flows for an extended range of currents, and there is a critical current above which it transforms into a skyrmion. For increased amounts of quenched disorder, the current needed for the skyrmionium to transform into a skyrmion decreases, and there is a critical disorder density above which a moving skyrmionium is not stable. In the moving state, the skyrmionium to skyrmion transformation leads to a drop in the velocity and the onset of a finite skyrmion Hall angle. We also find a reentrance effect in which the pinned skyrmionium transforms into a skyrmion just above depinning, restabilizes into skyrmionium at larger drives, and becomes unstable again at large currents. In conclusion, we also show that adding a transverse shaking drive can increase the lifetime of a moving skyrmionium by reducing the effect of the pinning in the direction of the drive.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Sliding dynamics of skyrmion molecular crystals

Using both atomistic and particle-based simulations, we investigate the current-driven dynamics of skyrmions on two-dimensional periodic substrates when there are multiple skyrmions per substrate minimum. At zero drive, the system forms pinned skyrmion molecular crystal states consisting of dimers, trimers, or dimer-trimer mixtures that have both positional and orientational order. On a square substrate lattice, the motion above depinning occurs via a running soliton that travels completely transverse to the applied current. This motion is generated by a torque from the Magnus force, which rotates the n-mer states perpendicular to the applied current. At higher drives, the flow becomes disordered while the Hall angle diminishes and gradually approaches the intrinsic value. In some cases, we also find directional locking where the Hall angle becomes locked to certain symmetry directions of the substrate over a range of currents. The transitions into and out of directionally locked states are accompanied by negative differential mobility in which the net velocity decreases as the drive increases. In conclusion, on a triangular substrate, we find no transverse mobility effects, but still observe directionally locked motion.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Nonlinear second order electromagnetic gyrokinetic theory for a tokamak plasma

The steep plasma pressure gradient that forms at the edge of the high confinement, H-mode regime of tokamak operation provides free energy to drive electromagnetic micro-instabilities that are widely believed to influence the transport processes in this so-called pedestal region. This high pressure gradient also provides a high current density (bootstrap current), known to influence ballooning mode stability and to be important for driving kink modes in the ideal magneto-hydrodynamic plasma model (so-called peeling-ballooning modes). Furthermore, efficient, steady state future tokamak power plants must operate with a large bootstrap current in the core and especially concerning spherical tokamaks, confinement will be influenced by electromagnetic turbulence. To accommodate these important situations, conventional electromagnetic gyrokinetic theory is extended to incorporate neoclassical effects in the equilibrium drives, allowing $B_{\vartheta} ~ B_0$ (B0 is the confining magnetic field, and $B_{\vartheta}$ is its poloidal component). This provides a global gyrokinetic model that self-consistently captures the consequences of large bootstrap current fractions on the equilibrium distribution functions.

kink modes↗
DOE OSTI2023

Alfvén eigenmode stability in a JET afterglow deuterium plasma and projections to deuterium–tritium plasmas

Abstract The performance of fusion devices relies strongly on the good confinement of energetic particles (EPs). Therefore, the investigation of EP transport by magnetohydrodynamic instabilities is one of the key aspects in the development of plasma scenarios. Alfvénic instabilities in particular can lead to significant losses of alpha particles that are essential for plasma self-heating. A so-called afterglow scheme has been developed to study the destabilization of Alfvén eigenmodes (AEs) by alpha particles and associated EP transport in the JET tokamak. In this work, the linear stability of AEs is discussed for the partial afterglow phase in a JET deuterium plasma discharge and for the full afterglow phase in a projected deuterium–tritium (DT) plasma. Thanks to recent upgrades in the tokamak transport code TRANSP, one can account for the contributions of different EP species to mode stability. Analysis of deuterium plasmas shows that AE growth rates are extremely sensitive to the energy and distribution of fast ions. An increase in fast ion energy can lead to more unstable AEs. In the afterglow phase of projected DT plasmas, it is EPs that mostly drive the AEs. However, the drive by alpha particles is comparable to that by beam ions and their contribution to the net growth rate might be hard to separate. According to the discussed projections, the destabilization of AEs might be ineffective because the background plasma damping significantly exceeds the EP drive. In this case, the development of an alternative plasma scenario that allows us to overcome such damping would be required in future experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Generation of meter-scale hydrogen plasmas and efficient, pump-depletion-limited wakefield excitation using 10 GeV electron bunches

High repetition rates and efficient energy transfer to the accelerating beam are important for a future linear collider based on the beam-driven plasma wakefield acceleration scheme (PWFA-LC). This paper reports the first results from the Plasma Wakefield Acceleration Collaboration (E300) that are beginning to address both of these issues using the recently commissioned FACET-II facility at SLAC national accelerator laboratory. Here we have generated meter-scale hydrogen plasmas using time-structured 10 GeV electron bunches from FACET-II, which hold the promise of dramatically increasing the repetition rate of PWFA by rapidly replenishing the gas between each shot compared to the hitherto used lithium plasmas that operate at 1–10 Hz. Furthermore, we have excited wakes in such plasmas that are suitable for high gradient particle acceleration with high drive-bunch to wake energy transfer efficiency- a first step in achieving a high overall energy transfer efficiency. We have done this by using time-structured electron drive bunches that typically have one or more ultra-high current (> 30 kA) femtosecond spike(s) superimposed on a longer (~0.4 ps) lower current (< 10 kA) bunch structure. The first spike effectively field-ionizes the gas and produces a meter-scale (30–160 cm) plasma, whereas the subsequent beam charge creates a wake. The length and amplitude of the wake depends on the longitudinal current profile of the bunch and plasma density. We find that the onset of pump depletion, when some of the drive beam electrons are nearly fully depleted of their energy, occurs for hydrogen pressure ≥ 1.5Torr. We also show that some electrons in the rear of the bunch can gain several GeV energies from the wake. These results are reproduced by particle-in-cell simulations using the QPAD code. At a pressure of ~2Torr, simulation results and experimental data show that the beam transfers about 60% of its energy to the wake.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗