Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DENSITY OF STATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Desolvation Processes in Channel Solvates of Niclosamide

The antiparasitic drug niclosamide (NCL) is notable for its ability to crystallize in multiple 1:1 channel solvate forms, none of which are isostructural. Here, using a combination of time-resolved synchrotron powder X-ray diffraction and thermogravimetry, the process-induced desolvation mechanisms of methanol and acetonitrile solvates are investigated. Structural changes in both solvates follow a complicated molecular-level trajectory characterized by a sudden shift in lattice parameters several degrees below the temperature where the desolvated phase first appears. Model fitting of kinetic data obtained under isothermal heating conditions suggests that the desolvation is rate-limited by the nucleation of the solvent-free product. The desolvation pathways identified in these systems stand in contrast to previous investigations of the NCL channel hydrate, where water loss by diffusion initially yields an anhydrous isomorph that converts to the thermodynamic polymorph at significantly higher temperatures. Taking the view that each solvate lattice is a unique “pre-organized” precursor, a comparison of the pathways from different starting topologies to the same final product provides the opportunity to reevaluate assumptions of how various factors (e.g., solvent binding strength, density) influence solid-state desolvation processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Peptoid-Based Programmable 2D Nanomaterial Sensor for Selective and Sensitive Detection of H 2 S in Live Cells

During the past decades, a variety of two-dimensional (2D) nanosheets have been developed through supramolecular self-assembly. Among them, those assembled from sequence-defined molecules have received particularly attention because they enable a precise displaying of functional groups, including fluorescent dyes, within nanosheet surfaces. On the other hand, due to the fluorescence self-quenching, synthesis of organic 2D nanosheets exhibiting high fluorescence quantum yields is a significant challenge. Herein, we report the utilization of H 2 S-responsive probes as peptoid sidechains to design and synthesize crystalline 2D nanomembranes (2DNMs) as selective and sensitive H 2 S sensors. These 2DNM sensors exhibit a high quantum yield as a result of high crystallinity and tunable probe density. Compared with amorphous state of peptoid assembly and pre-assembled peptoid-probe conjugates, these crystalline 2DNM sensors exhibit a significantly strong fluorescence intensity and a high sensitivity (~ 0.36 nM). By sonication-cutting these 2DNM sensors into a colloidal form in aqueous solution, we further demonstrated the use of colloidal 2DNMs for detecting both exogenous and endogenous H 2 S inside cells or targeted cell organelles. As far as we know, this is the first example of using sequence-defined 2D nanomaterials for selective and sensitive detection of H 2 S. Because peptoids are biocompatible and peptoid-based 2DNMs are highly programmable, we expect that this new class of 2DNM sensors offer great potentials for detecting H 2 S and for biological applications.

2D nanomaterials↗
DOE OSTI2024

Tailoring Interlayer Coupling in Few-Layer MoS 2 with Stacking Configuration

Here we manipulated the stacking configuration of a few-layer MoS 2 to investigate the impact of interlayer coupling on electrical band engineering. By simultaneously synthesizing two distinct stacking types of MoS2 islands, wedding cake (W) and spiral (S), on the same substrate, we explored layer-dependent electrical properties under identical experimental conditions. We used multiple scanning probe microscopy techniques to map local electronic properties with respect to the number of layers, stacking configurations, and local heterogeneities. First-principles calculations verified the role of distinct interlayer coupling in terms of the interlayer distance. Our findings highlight the critical role of interlayer coupling in applications of transition metal dichalcogenides.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Aldol Condensation and Esterification over Ti-Substituted *BEA Zeolite: Mechanisms and Effects of Pore Hydrophobicity

Aldol condensation and esterification reactions provide paths to upgrade ethanol and acetaldehyde to higher- value molecules useful as fuels or intermediates for the synthesis of polymers. Transition-metal-substituted BEA zeolites (M-BEA) catalyze these reactions; however, the mechanisms for these processes in M-BEA and the effects of incidental or purposefully included silanol groups are not reported. Here, we combine kinetic and spectroscopic measurements obtained during catalytic reactions of acetaldehyde (CH 3 CHO), ethanol (C 2 H 5 OH), and hydrogen (H 2 ) mixtures over a series of Ti-BEA catalysts that possess a known range of silanol group densities to examine the kinetic relevance of intervening steps and the impact of silanol groups on catalytic rates. Across all Ti-BEA, rates for aldol condensation and esterification increase with the pressure of CH 3 CHO; however, C 2 H 5 OH and H 2 O weakly inhibit the rates of these reactions. The substitution of CD 3 CDO for CH 3 CHO decreases aldol condensation rates slightly (~10%) but leads to greater esterification rates (2- to 5-fold). The kinetic isotope effects together with the measured dependence of rates on reactant pressures suggest that aldol condensation and esterification occur on unoccupied Ti sites and involve multiple kinetically relevant steps. CH 3 CHO deprotonates irreversibly, and the kinetically relevant nucleophilic attack of the enolate to CH 3 CHO* (i.e., adsorbed CH 3 CHO on Ti sites) leads to aldol products, while the nucleophilic attack of the enolate to C 2 H 5 OH* gives esters. Selectivities toward aldol condensation increase with the ratio of CH 3 CHO to C 2 H 5 OH pressure and with increases in the silanol density of the as-synthesized Ti-BEA. During catalysis, in situ infrared spectroscopy demonstrates that these silanol groups react with C 2 H 5 OH to form ethoxysilane groups (i.e., SiOC 2 H 5 ) that modify the polarity of the environment near Ti active sites. As initial silanol densities increase, steady-state turnover rates for aldol condensation and esterification increase by factors of 5 and 2, respectively. The changes in rates and selectivities among Ti-BEA catalysts likely reflect changes in excess free energies of transition states for enolization and nucleophilic attack of the enolate to adsorbed coreactants. The differences in excess stability report on the interactions among reactive intermediates at framework Ti atoms and the ethoxysilane and remaining silanol groups present. Furthermore, the in situ modification of these pore environments confers changes in the stability of reactive species in a manner that contradicts intuition when considering the initial state of the catalyst but can be reconciled after accounting for the formation of persistent alkoxy surface moieties in the pores.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Direct Transformation of SiH 4 to a Molecular L(H) 2 Co=Si=Co(H) 2 L Silicide Complex

The synthesis of bimetallic molecular silicide complexes is reported, based on the use of multiple Si–H bond activations in SiH 4 at the metal centers of 14-electron LCo I fragments (L = Tp", HB(3,5-diisopropylpyrazolyl) 3 – ; [BP 2 tBu Pz], PhB(CH 2 P t Bu 2 ) 2 (pyrazolyl)). Upon exposure of (Tp"Co) 2 (μ-N 2 ) (1) to SiH 4 , a mixture of (Tp"Co) 2 (μ-H) (2) and (Tp"Co) 2 (μ-H) 2 (3) was formed and no evidence for Si–H oxidative addition products was observed. In contrast, [BP 2 tBu Pz]-supported Co complexes led to Si–H oxidative additions with the generation of silylene and silicide complexes as products. Notably, the reaction of ([BP 2 tBu Pz]Co) 2 (μ-N 2 ) (5) with SiH 4 gave the dicobalt silicide complex [BP 2 tBu Pz](H) 2 Co=Si=Co(H) 2 [BP 2 tBu Pz] (8) in high yield, representing the first direct route to a symmetrical bimetallic silicide. Here, the effect of the [BP 2 tBu Pz] ligand on Co–Si bonding in 7 and 8 was explored by analysis of solid-state molecular structures and density functional theory (DFT) investigations. Upon exposure to CO or DMAP (DMAP = 4-dimethylaminopyridine), 8 converted to the corresponding [BP 2 tBu Pz]Co(L) x adducts (L = CO, x = 2; L = DMAP, x = 1) with concomitant loss of SiH 4 , despite the lack of significant Si–H interactions in the starting complex. On heating to 60 °C, 8 underwent reaction with MeCl to produce small quantities of Me x SiH 4–x (x = 1–3), demonstrating functionalization of the μ-silicon atom in a molecular silicide to form organosilanes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Light-induced dimension crossover dictated by excitonic correlations

In low-dimensional systems with strong electronic correlations, the application of an ultrashort laser pulse often yields novel phases that are otherwise inaccessible. The central challenge in understanding such phenomena is to determine how dimensionality and many-body correlations together govern the pathway of a non-adiabatic transition. To this end, we examine a layered compound, 1T-TiSe 2 , whose three-dimensional charge-density-wave (3D CDW) state also features exciton condensation due to strong electron-hole interactions. We find that photoexcitation suppresses the equilibrium 3D CDW while creating a nonequilibrium 2D CDW. Remarkably, the dimension reduction does not occur unless bound electron-hole pairs are broken. This relation suggests that excitonic correlations maintain the out-of-plane CDW coherence, settling a long-standing debate over their role in the CDW transition. Our findings demonstrate how optical manipulation of electronic interaction enables one to control the dimensionality of a broken-symmetry order, paving the way for realizing other emergent states in strongly correlated systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Charge order in the kagome lattice Holstein model: a hybrid Monte Carlo study

The Holstein model is a paradigmatic description of the electron-phonon interaction, in which electrons couple to local dispersionless phonon modes, independent of momentum. The model has been shown to host a variety of ordered ground states such as charge density wave (CDW) order and superconductivity on several geometries, including the square, honeycomb, and Lieb lattices. In this work, we study CDW formation in the Holstein model on the kagome lattice, using a recently developed hybrid Monte Carlo simulation method. We present evidence for √3 × √3 CDW order at an average electron filling of < n > = 2/3 per site, with an ordering wavevector at the K-points of the Brillouin zone. We estimate a phase transition occurring at T c ≈ t/18, where t is the nearest-neighbor hopping parameter. Our simulations find no signature of CDW order at other electron fillings or ordering momenta for temperatures T ≥ t/20.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Emergence of antiferromagnetic correlations and Kondolike features in a model for infinite layer nickelates

We report a determinant quantum Monte Carlo study of a two-band model, inspired by infinite-layer nickelates, focusing on the influence of interlayer hybridization between $3d_{x^{2}-y^{2}}$ orbitals derived from Ni (or Ni and O) in one layer and rare-earth (R) 5d orbitals in the other layer, hereafter the Ni and R layers, respectively. For a filling with one electron shared between the two layers on average, interlayer hybridization leads to “self-doped" holes in the Ni layer and the absence of antiferromagnetic ordering, but rather the appearance of spin-density and charge-density stripe-like states. As the interlayer hybridization increases, both the Ni and R layers develop antiferromagnetic correlations, even though either layer individually remains away from half-filling. For hybridization within an intermediate range, roughly comparable to the intralayer nearest-neighbor hopping t Ni , the model develops signatures of Kondo-like physics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Dipole ladders with large Hubbard interaction in a moiré exciton lattice

Two-dimensional semiconductor moiré superlattices have emerged as a powerful platform for engineering correlated electronic phenomena. On the other hand, optical excitation creates charge neutral interlayer excitons with an out-of-plane electric dipole. Strong onsite dipole–dipole interaction promises the formation of correlated bosonic states, akin to the Mott states of electrons, but has not yet been demonstrated. Here we report a large interaction between excitons occupying the same moiré lattice site—characterized by the Hubbard U parameter—and consequent dipole ladders with spin- and electron-filling dependence in WSe 2 /WS 2 moiré superlattices. Photoluminescence measurements show successive peaks emerging with an energy separation of around 34 meV above the ground state as the exciton density is increased. This corresponds to the sequential injection of excitons into a single site with an energy cost to overcome the large exciton Hubbard U, forming a dipole ladder. Based on findings of local magnetic moments at two holes per moiré cell, we show that excitons can also fill a second moiré orbital, establishing the two-orbital nature of the moiré potential landscape. Our results show that the Bose–Hubbard model with possible exciton crystal phases can be investigated in interacting opto-moiré quantum matter.

36 MATERIALS SCIENCE↗
DOE OSTI2024

A V 3 Sb 5 kagome superconductors

Here, the recent discovery of the AV 3 Sb 5 (A = K, Rb, Cs) kagome superconductors launched a growing field of research investigating the interplay between superconductivity and charge-density wave order in kagome metals. Specifically, the AV 3 Sb 5 family of materials naturally exhibits a Fermi level close to the Van Hove singularities associated with the saddle points formed from the prototypical kagome band structure. The charge-density wave and superconducting states that form within the kagome networks of these compounds exhibit a number of anomalous properties reminiscent of theoretical predictions of exotic states in kagome metals tuned close to their Van Hove fillings. In this Review, we discuss the key structural and electronic features of AV 3 Sb 5 compounds and survey the status of investigations of their unconventional electronic phase transitions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Anomalous softening of 3D printed elastomeric foam irradiated under compressive strain

Elastomeric foam is an essential component in many industrial and technological settings, primarily as thermal insulators and as positional/mechanical support cushions. In particular, silicone foam is utilized in harsh environments due to exceptional thermal and chemical stability. Under service conditions within certain applications such material gets exposed to a high dosage of gamma radiation, which can permanently alter the material’s structural and mechanical response properties. Most studies on gamma-exposure under inert or oxidative atmosphere indicate hardening of silicone foam, which is attributed to radiation-induced enhancement in chemical cross-linking. Here we report two contrasting effects depending on whether (non-oxidative) radiation exposure is carried out with the foam under zero or finite compressive strain. While in the former case we observe radiation-hardening consistent with previous studies, in the latter case (50% porous foam under 30% uniaxial compression) we see a monotonic decrease in Young’s modulus with increasing dosage, although solvent swelling experiments on the constituent rubber indicate a net increase in cross-link density independent of the state of strain. We quantitatively model all dose-dependent data using the Ogden Hyperfoam strain-energy function within the framework of Tobolsky two-network scheme and attribute the above anomaly to a combined effect of radiation-induced thickness change (compression set) and inherent nonlinearity in the foam’s stress-strain response.

Coarse-grained models↗
DOE OSTI2021

Effect of water frustration on water oxidation catalysis in the nanoconfined interlayers of layered manganese oxides birnessite and buserite

The role of geometric frustration of water molecules on the rate of water oxidation in the nanoconfined interlayer of manganese-oxide layered materials (birnessite, buserite) is examined in a well-controlled experiment. Calcium buserite is prepared, and used in a split-batch synthetic protocol to prepare calcium birnessite, sodium buserite, and sodium birnessite, and partially dehydrated sodium birnessite. Thus, four samples are prepared in which features effecting catalytic efficiency (defect density, average manganese oxidation state) are controlled, and the main difference is the degree of hydration of the interlayer (two layers of water in buserites vs one layer of water in birnessite). Here, molecular dynamics simulations predict birnessite samples to exhibit geometric water frustration, which facilitates redox catalysis by lowering the Marcus reorganizaiton energy of electron transfer, while buserite samples exhibit traditional intermolecular hydrogen bonding among the two-layer aqeuous region, leading to slower catalytic behavior akin to redox reactions in bulk water. Water oxdiation activity is investigated using chemical and electrochemical techniques, demonstrating and quantifying the role of water frustration in enhancing catalysis. Calculation and experiment demonstrate dehydrated sodium birnessite to be most effective, and calcium buserite the least effective, with a difference in electrocatlytic overpotential of ~750 mV and a ~20-fold difference in turnover number.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Electrocatalytic nitrate reduction on rhodium sulfide compared to Pt and Rh in the presence of chloride

Chloride poisoning is a serious problem for the electrocatalytic reduction of aqueous nitrate (NO 3 – ) and improved electrocatalysts are needed. Here we study the electrocatalytic activity of rhodium sulfide supported on carbon (Rh x S y /C) for the reduction of nitrate and compare it against Pt/C and Rh/C in the presence of chloride. Between 0.05–0.15 V vs. RHE, Rh x S y /C has a steady-state nitrate reduction current density in 1 M H 2 SO 4 + 1 M NaNO 3 that is 1.6–5.6 times greater than Rh/C (the most active metal electrocatalyst) and 10–24 times greater than Pt/C. Current densities are decreased by 37% for Rh x S y /C, 62% for Rh/C, and 40% for Pt/C at 0.1 V vs. RHE in the presence of 1 mM chloride. The decrease in nitrate reduction activity for Pt, Rh, and Rh x S y is due to the competitive adsorption of chloride and nitrate on the surface. Density functional theory (DFT) modeling predicts that chloride poisoning will persistently inhibit nitrate reduction on metals due to linear adsorbate scaling relations between nitrate and chloride. DFT calculations and microkinetic modeling of our experimental measurements predict that nitrate converts to nitrite via an H-assisted dissociation mechanism on Pt and direct nitrate dissociation on Rh and Rh x S y . Pristine Rh x S y (i.e., Rh 3 S 4 , Rh 2 S 3 , and Rh 17 S 15 ) terraces are predicted to be inactive toward nitrate reduction. In contrast, sulfur vacancies in Rh 3 S 4 terraces are predicted to be active for nitrate reduction, but also bind chloride strongly. Furthermore, sulfur-defected Rh 3 S 4 rationalize the experimentally observed high activity but moderate chloride poison-resistance of Rh x S y /C for nitrate reduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Electronically-coupled redox centers in trimetallic cobalt complexes

Synthesis and isolation of molecular building blocks of metal–organic frameworks (MOFs) can provide unique opportunities for characterization that would otherwise be inaccessible due to the heterogeneous nature of MOFs. Herein, we report a series of trinuclear cobalt complexes incorporating dithiolene ligands, triphenylene-2,3,6,7,10,11-hexathiolate (THT) (1 3+ ), and benzene hexathiolate (BHT) (2 3+ ), with 1,1,1,-tris(diphenylphosphinomethyl)ethane (triphos) employed as the capping ligand. Single crystal X-ray analyses of 1 3+ and 2 3+ display three five-coordinate cobalt centers bound to the triphos and dithiolene ligands in a distorted square pyramidal geometry. Cyclic voltammetry studies of 1 3+ and 2 3+ reveal three redox features associated with the formation of mixed valence states due to the sequential reduction of the redox-active metal centers (Co III/II ). Using this electrochemical data, the comproportionality values were determined for 1 and 2 (log K c = 1.4 and 1.5 for 1, and 4.7 and 5.8 for 2), suggesting strong resonance-stabilized coupling of the metal centers, with stronger electronic coupling observed for complex 2 compared to that for complex 1. Cyclic voltammetry studies were also performed in solvents of varying polarity, whereupon the difference in the standard potentials (ΔE 1/2 ) for 1 and 2 was found to shift as a function of the polarity of the solvent, indicating a negative correlation between the dielectric constant of the electrochemical medium and the stability of the mixed valence species. Spectroelectrochemical studies of in situ generated multi-valent (MV) states of complexes 1 and 2 display characteristic NIR intervalence charge transfer (IVCT) bands, and analysis of the IVCT transitions for complex 2 suggests a weakly coupled class II multi-valent species and relatively large electronic coupling factors (1700 cm –1 for the first multi-valent state of 2 2+ , and 1400 and 4000 cm –1 for the second multi-valent state of 2 + ). Here, density functional theory (DFT) calculations indicate a significant deviation in relative energies of the frontier orbitals of complexes 1 3+ , 2 3+ , and 3 + that contrasts those calculated for the analogous trinuclear cobalt dithiolene complexes employing pentamethylcyclopentadienyl (Cp*) as the capping ligand (Co 3 Cp* 3 THT and Co 3 Cp* 3 BHT, respectively), and may be a result of the cationic nature of complexes 1 3+ , 2 3+ , and 3 + .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

A substituent-dependent deep-blue pyrene-based chemosensor for trace nitroaniline sensing

Nitroaniline (NA) is a kind of high toxicity and pathogenic amine derivative, and the trace monitoring of nitroaniline has become an urgent problem in terms of both the environment and security. Herein, two K-region multiple substituted pyrene-based luminogens with reasonable photoluminescence efficiency and blue emission (408–430 nm) have been synthesized and characterized. Their photophysical properties were carefully investigated in solution and in the solid state by experimental and density functional theory (DFT) methods. It is worth mentioning that both of these π-electron rich and extended π-conjugated materials were used for the detection of electron deficient nitroaromatics (NACs) based on a photo-induced electron transfer (PET) mechanism, and a sensitive response towards NA, especially for p-NA with a limit of detection (LOD) as low as 8.58 × 10 -9 M, was observed, with a fluorescence quenching efficiency up to 99.5%. In conclusion, these research results provided a low-cost and simple strategy for trace nitroaniline sensing.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Methane partial oxidation under periodic reaction conditions on Pt/Al 2 O 3

The increasing interest in utilizing methane, the primary component of natural gas, for chemical production has spurred research into methane partial oxidation (MPO) as an alternative to traditional steam methane reforming (SMR). MPO has lower energy requirements and potential for carbon capture, making it an attractive option for hydrogen production. Challenges remain, however, such as carbon deposition leading to degradation and achieving high hydrogen selectivity. Here, the impact of periodic reactor operation on MPO over a Pt/Al 2 O 3 catalyst was studied, primarily via varying reactor inlet compositions. Experiments were conducted using periodic operation strategies to assess the influence of changing reactant inlet concentrations on hydrogen formation during MPO. The results suggest that cycling between mixtures with low and high oxygen content can lead to transient hydrogen formation rates that surpass those achieved at steady state. Control experiments and density functional theory (DFT) calculations show that enhanced hydrogen formation can be attributed to the reaction between CO with hydroxyl groups at the metal and alumina support interface. Furthermore, this work underscores the critical role of surface coverages at the metal–support interface and suggests avenues for future exploration, including alternative support materials with higher OH mobility and changes in the cycling scheme to enhance catalyst performance under periodic conditions.

03 NATURAL GAS↗