Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Convective clouds”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Convection–Kelvin Wave Coupling in a Global Convection-Permitting Model

A convectively coupled equatorial Kelvin wave (CCKW) was observed over the equatorial Indian Ocean in early November 2011 during the DYNAMO field campaign. This study examines the structure of the CCKW event using two simulations made using the MPAS model: one with 3-km grid spacing without convective parameterization and another with a 15-km grid and parameterized convection. Both simulations qualitatively capture the observed structure of the CCKW, including its vertical tilt and progression of cloud/precipitation structures. The two simulations, however, differ substantially in the amplitude of the CCKW-associated precipitation. While the 3-km run realistically captures the observed modulation of precipitation by the CCKW, the 15-km simulation severely underestimates its magnitude. To understand the difference between the two MPAS simulations regarding wave–convection coupling within the CCKW, the relationship of precipitation with convective inhibition, saturation fraction, and surface turbulent fluxes is investigated. Results show that the 15-km simulation underestimates the magnitude of the CCKW precipitation peak in association with its unrealistically linear relationship between moisture and precipitation. Precipitation, both in observations and the 3-km run, is predominantly controlled by saturation fraction and this relationship is exponential. In contrast, the parameterized convection in the 15-km run is overly sensitive to convective inhibition and not sensitive enough to environmental moisture. The implications of these results on CCKW theories are discussed.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2017

On the Dependence of Cloud Feedbacks on Physical Parameterizations in WRF Aquaplanet Simulations

We investigate the effects of physical parameterizations on cloud feedback uncertainty in response to climate change. For this purpose, we construct an ensemble of eight aquaplanet simulations using the Weather Research and Forecasting (WRF) model. In each WRF‐derived simulation, we replace only one parameterization at a time while all other parameters remain identical. By doing so, we aim to (i) reproduce cloud feedback uncertainty from state‐of‐the‐art climate models and (ii) understand how parametrizations impact cloud feedbacks. Our results demonstrate that this ensemble of WRF simulations, which differ only in physical parameterizations, replicates the range of cloud feedback uncertainty found in state‐of‐the‐art climate models. We show that microphysics and convective parameterizations govern the magnitude and sign of cloud feedbacks, mostly due to tropical low‐level clouds in subsidence regimes. Finally, this study highlights the advantages of using WRF to analyze cloud feedback mechanisms owing to its plug‐and‐play parameterization capability.

Cesana, Gregory↗
DOE OSTI2023

Vertical Resolution Impacts Explicit Simulation of Deep Convection

Abstract The aggregation of tropical convection greatly influences the mean‐state of the atmosphere, altering humidity distributions, total atmospheric radiative cooling, and cloud amounts. Although studies have demonstrated the sensitivity of convective aggregation to horizontal resolution and domain size, few studies have explored the impact of vertical resolution on convective aggregation. Here, we investigate the impact of vertical resolution on simulations of deep convection and convective aggregation using the System for Atmospheric Modeling convection resolving model. We analyze simulations of tropical radiative‐convective equilibrium with varying vertical levels (32, 64, 128, and 256) across small (100 km), medium (700 km) and large (1,500 km) domains. We demonstrate that relative humidity and cloud fraction decrease with increasing vertical resolution as a result of reduced turbulent mixing. Vertical resolution also influences the occurrence of, onset time, and equilibrium intensity of aggregated convection, and also appears to affect the sensitivity of convective aggregation to domain size. Understanding how simulated convection aggregates, as well as its simulated sensitivity to model formulation, is critical for making and interpreting future predictions of global climate change.

Meteorology & Atmospheric Sciences↗
DOE OSTI2026

E3SMv3 ‘Nephele’ Perturbed Parameter Ensemble Value-Added Product for ENA, SGP, NSA, and Global Means

Processed output from the E3SMv3 Nephele perturbed parameter ensemble (PPE). This product contains global means of present-day (using 2010 aerosol forcings) and preindustrial (using 1850 aerosol forcings) monthly and daily global-mean quantities, as well as hourly mean quantities at the E3SMv3 model grid cell closest to the ENA, SGP, and NSA ARM sites. In this PPE, the E3SMv3 model was run for 27 months in an atmosphere-only configuration with free tropospheric winds nudged to reanalysis. Each ensemble member represents a unique combination of 25 model parameter values (in the microphysics, convective microphysics, and aerosol schemes) that were perturbed randomly and simultaneously. The E3SMv3 default configuration is included as member 0. See https://doi.org/10.22541/essoar.174907165.57104591/v1 (in review) for more information on the Nephele PPE and the perturbed parameters.

Model atmospheric temperature↗
NASA NTRS1983

The inference of tropical cyclone dynamics using GOES VISSR/VAS data

The sequence of events observed during tropical cyclone Emily, was suggested as a possible mechanism for cyclogenesis. Geostationary Operational Environmental Satellite (GOES) East VISSR/VAS sensors were used. The VISSR visible imagery obtained every 15 minutes was used to define the low tropospheric cyclonic vortex and upper tropospheric horizontal convergence. The VAS water vapor (channels 9 and 10) and carbon dioxide (channels 3 and 4) channels were used to infer upper and middle tropospheric subsidence by monitoring the Adiabatic compressional drying and warming, respectively, occurring within this layer. Evidence of an existing lower tropospheric cyclonic vortex was seen. The satellite derived wind vectors (length of vector is proportional to wind velocity, where the strongest winds were approximately 35 knots) are superimposed on the GOES visible image of tropical storm Emily. Vectors and low level clouds depict the center of the cyclonic vortex immediately south of the large convective cell in the center of the image. Upper tropospheric cloud tracers and rawinsonde reports along the Eastern United States suggest that the southwesterly environmental upper atmospheric flow is converging with the outflow from the convective cell north of the vortex.

Rodgers, E. B.↗
NASA NTRS2003

Precipitation Processes Developed During ARM (1997), TOGA COARE (1992), GATE (1974), SCSMEX (1998), and KWAJEX (1999): Consistent 2D, Semi-3D and 3D Cloud Resolving Model Simulations

Real clouds and cloud systems are inherently three-dimensional (3D). Because of the limitations in computer resources, however, most cloud-resolving models (CRMs) today are still two-dimensional (2D). A few 3D CRMs have been used to study the response of clouds to large-scale forcing. In these 3D simulations, the model domain was small, and the integration time was 6 hours. Only recently have 3D experiments been performed for multi-day periods for tropical cloud systems with large horizontal domains at the National Center for Atmospheric Research (NACAR) and at NASA Goddard Space Flight Center . At Goddard, a 3D Goddard Cumulus Ensemble (GCE) model was used to simulate periods during TOGA COARE, SCSMEX and KWAJEX using 512 by 512 km domain (with 2 km resolution). The results indicate that surface precipitation and latent heating profiles are very similar between the 2D and 3D GCE model simulations. The reason for the strong similarity between the 2D and 3D CRM simulations is that the same observed large-scale advective tendencies of potential temperature, water vapor mixing ratio, and horizontal momentum were used as the main focusing in both the 2D and 3D models. Interestingly, the 2D and 3D versions of the CRM used at CSU showed significant differences in the rainfall and cloud statistics for three ARM cases. The major objectives of this paper are: (1) to assess the performance of the super-parameterization technique, (2) calculate and examine the surface energy (especially radiation) and water budgets, and (3) identify the differences and similarities in the organization and entrainment rates of convection between simulated 2D and 3D cloud systems.

Tao, W-K.↗
NASA NTRSDate not supplied

Toward The Development of Hailstorm Climatologies Derived From Reanalyses and Infared/Passive Microwave Satellite Imagers

Geostationary satellite imagers, such as those of the Geostationary Operational Environmental Satellite (GOES) and Meteosat series, provide both historical and near-real-time observations of cloud top patterns that are commonly associated with severe convection. Environmental conditions favorable for severe weather are thought to be represented well by reanalyses. Predicting exactly where convection and costly storm hazards like hail will occur using models or satellite imagery alone, however, is extremely challenging. The multivariate combination of satellite-observed cloud patterns with reanalysis environmental parameters, linked to United States Next Generation Weather Radar- (NEXRAD-) estimated Maximum Expected Size of Hail (MESH) using a deep neural network (DNN), enables estimation of potentially severe hail likelihood for any observed storm cell. These estimates are specifically designed to make hail likelihood distinctions based on satellite-indicated points of deep convection within environments favorable for storm development. We seek an approach that can be used to estimate climatological hailstorm frequency and risk throughout the historical satellite data record. This presentation demonstrates that statistical distributions of convective parameters from satellite and reanalysis show separation between non-severe/severe hailstorm classes for predictors including overshooting cloud top temperature and area characteristics, convective available potential energy, vertical wind shear, 500 hPa temperature, mid-level lapse rate, precipitable water, and convective inhibition. These complex, multivariate predictor relationships are exploited within a DNN to produce a hail likelihood metric with a critical success index of 0.504 and Heidke skill score of 0.403, which is exceptional among recent analogous hail studies. Furthermore, applications of the DNN to select case studies demonstrate good qualitative agreement between hail likelihood and MESH. These hail classifications are aggregated across an 11-year GOES-12/13 image database to derive a hail frequency and severity climatology, which denotes the Central Plains, the Midwest, and northwestern Mexico as being the most hail-prone regions within the domain studied. Opportunities for training and applying DNN-based hailstorm predictions to recently developed GOES-8/10/12/13/16 and Meteosat Second Generation convective storm detection and characterization climatologies over South America and South Africa, respectively, will also be presented.

Kristopher Bedka↗
NASA NTRS2000

The Estimation of Hydrometeor Profiles from Wideband Microwave Observations

Profiles of the microphysical properties of clouds and raincells are essential in many areas of atmospheric research and operational meteorology. In order to enhance the understanding of the nonlinear and underconstrained relationships between cloud and hydrometeor microphysical profiles and passive microwave brightness temperatures, estimations of cloud profiles for an anvil, a convective, and an updraft region of an oceanic squall were performed. The estimations relied on comparisons between radiative transfer calculations of incrementally estimated microphysical profiles and concurrent dual-altitude wideband brightness temperatures from the 22 February 1993 flight during TOGA-COARE. The wideband observations (10--220 GHz) are necessary for estimating cloud profiles reaching up to 20 km. The low frequencies enhance the rain and cloud water profiles, while the high frequencies are required to detail the higher altitude ice microphysics. A microphysical profile was estimated for each of the three regions of the storm. Each of the three estimated profiles produced calculated brightness temperatures within approximately 10 K of the observations. A majority, of the total iterative adjustment were to the estimated profile's frozen hydrometeor characteristics and were necessary to match the high frequency calculations with the observations. This indicates a need to validate cloud resolving models using high frequencies. Some difficulties matching the 37 GHz observation channels on the DC-8 and ER-2 aircrafts with the calculations simulated at the two aircraft heights (approximately 11 km and 20 km, respectively) were noted and potential causes presented.

Gail M Skofronick-Jackson↗
DOE OSTI2024

TAMU TRACER: Targeted Mobile Measurements to Isolate the Impacts of Aerosols and Meteorology on Deep Convection

Difficulty in using observations to isolate the impacts of aerosols from meteorology on deep convection often stems from inability to resolve the spatiotemporal variations in the environment serving as the storm’s inflow region. During the DOE TRacking Aerosol Convection interactions ExpeRiment (TRACER) in June-September 2022, a Texas A&M University (TAMU) team conducted a mobile field campaign to characterize the meteorological and aerosol variability in airmasses that serve as inflow to convection across the ubiquitous mesoscale boundaries associated with the sea- and bay-breezes in the Houston, Texas, region. These boundaries propagate inland over the fixed DOE Atmospheric Radiation Measurement (ARM) sites. However, convection occurs on either or both the continental or maritime sides or along the boundary. The maritime and continental airmasses serving as convection inflow may be quite distinct, with different meteorological and aerosol characteristics that fixed-site measurements cannot simultaneously sample. Thus, a primary objective of TAMU TRACER was to provide mobile measurements similar to those at the fixed sites, but in the opposite airmass across these moving mesoscale boundaries. TAMU TRACER collected radiosonde, lidar, aerosol, cloud condensation nuclei (CCN), and ice nucleating particle (INP) measurements on 29 enhanced operations days covering a variety of maritime, continental, outflow, and pre-frontal airmasses. This paper summarizes the TAMU TRACER deployment and measurement strategy, instruments, available datasets, and provides sample cases highlighting differences between these mobile measurements and those made at the ARM sites. We also highlight the exceptional TAMU TRACER undergraduate student participation in high impact learning activities through forecasting and field deployment opportunities.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2005

The Effect of Environmental Conditions on Tropical Deep Convective Systems Observed from the TRMM Satellite

This study uses measurements of radiation and cloud properties taken between January and August 1998 by three Tropical Rainfall Measuring Mission (TRMM) instruments, the Clouds and the Earth's Radiant Energy System (CERES) scanner, the TRMM Microwave Imager (TMI), and the Visible and InfraRed Scanner (VIRS), to evaluate the variations of tropical deep convective systems (DCS) with sea surface temperature (SST) and precipitation. This study finds that DCS precipitation efficiency increases with SST at a rate of approx. 2%/K. Despite increasing rainfall efficiency, the cloud areal coverage rises with SST at a rate of about 7%/K in the warm tropical seas. There, the boundary layer moisture supply for deep convection and the moisture transported to the upper troposphere for cirrus-anvil cloud formation increase by approx. 6.3%/K and approx. 4.0%/K, respectively. The changes in cloud formation efficiency, along with the increased transport of moisture available for cloud formation, likely contribute to the large rate of increasing DCS areal coverage. Although no direct observations are available, the increase of cloud formation efficiency with rising SST is deduced indirectly from measurements of changes in the ratio of DCS ice water path and boundary layer water vapor amount with SST. Besides the cloud areal coverage, DCS cluster effective sizes also increase with precipitation. Furthermore, other cloud properties, such as cloud total water and ice water paths, increase with SST. These changes in DCS properties will produce a negative radiative feedback for the earth's climate system due to strong reflection of shortwave radiation by the DCS. These results significantly differ from some previous hypothesized dehydration scenarios for warmer climates, and have great potential in testing current cloud-system resolving models and convective parameterizations of general circulation models.

Lin, Bing↗
DOE OSTI2021

A Bimodal Diagnostic Cloud Fraction Parameterization. Part I: Motivating Analysis and Scheme Description

Cloud fraction parameterizations are beneficial to regional, convection-permitting numerical weather prediction. For its operational regional midlatitude forecasts, the Met Office uses a diagnostic cloud fraction scheme that relies on a unimodal, symmetric subgrid saturation-departure distribution. This scheme has been shown before to underestimate cloud cover and hence an empirically based bias correction is used operationally to improve performance. This first of a series of two papers proposes a new diagnostic cloud scheme as a more physically based alternative to the operational bias correction. The new cloud scheme identifies entrainment zones associated with strong temperature inversions. Additionally, for model grid boxes located in this entrainment zone, collocated moist and dry Gaussian modes are used to represent the subgrid conditions. The mean and width of the Gaussian modes, inferred from the turbulent characteristics, are then used to diagnose cloud water content and cloud fraction. It is shown that the new scheme diagnoses enhanced cloud cover for a given gridbox mean humidity, similar to the current operational approach. It does so, however, in a physically meaningful way. Using observed aircraft data and ground-based retrievals over the southern Great Plains in the United States, it is shown that the new scheme improves the relation between cloud fraction, relative humidity, and liquid water content. An emergent property of the scheme is its ability to infer skewed and bimodal distributions from the large-scale state that qualitatively compare well against observations. A detailed evaluation and resolution sensitivity study will follow in Part II.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

The Impacts of Horizontal Grid Spacing and Cumulus Parameterization on Subseasonal Prediction in a Global Convection-Permitting Model

Monthlong simulations targeting four Madden–Julian oscillation events made with several global model configurations are verified against observations to assess the roles of grid spacing and convective parameterization on the representation of tropical convection and midlatitude forecast skill. Specifically, the performance of a global convection-permitting model (CPM) configuration with a uniform 3-km mesh is compared to that of a global 15-km mesh with and without convective parameterization, and of a variable-resolution “channel” simulation using 3-km grid spacing only in the tropics with a scale-aware convection scheme. It is shown that global 3-km simulations produce realistic tropical precipitation statistics, except for an overall wet bias and delayed diurnal cycle. The channel simulation performs similarly, although with an unrealistically higher frequency of heavy rain. The 15-km simulations with and without cumulus schemes produce too much light and heavy tropical precipitation, respectively. Without convection parameterization, the 15-km global model produces unrealistically abundant, short-lived, and intense convection throughout the tropics. Only the global CPM configuration is able to capture eastward-propagating Madden–Julian oscillation events, and the 15-km runs favor stationary or westward-propagating convection organized at the planetary scale. The global 3-km CPM exhibits the highest extratropical forecast skill aloft and at the surface, particularly during week 3 of each hindcast. Although more cases are needed to confirm these results, this study highlights many potential benefits of using global CPMs for subseasonal forecasting. Furthermore, results show that alternatives to global convection-permitting resolution—using coarser or spatially variable resolution—feature compromises that may reduce their predictive performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2003

Sensitivity of Precipitation Processes to Microphysics and Resolution in a Cloud Resolving Model

The Goddard Cumulus Ensemble (GCE) model examines the impact of various microphysical schemes, and vertical and horizontal resolution in the development, intensity and rainfall associated with mesoscale convective systems, idealized hurricanes and an ensemble of clouds. The model variables include horizontal and vertical velocities, potential temperature, perturbation pressure, turbulent kinetic energy, and mixing rations of all water phases (vapor, liquid and ice). The major characteristics of the GCE model are the explicit representation of warm rain and ice microphysical processes, and their complex interactions with solar and infrared radiative transfer processes and with surface processes. For idealized hurricanes, an axisymmetric version of the GCE model was developed and used to simulate the tropical cyclogenesis process using both a Rankin vortex and saturated air within a specified radius as initial conditions. For mesoscale convective systems, the 3-D version of the GCE model was use to simulate squall lines that developed in the western Pacific, South China Sea, eastern Atlantic, South America and central U.S. FOr the cloud ensemble, the GCE model was integrated for several days in order to have a good sampling of cloud statistics. In this paper, the sensitivities of hurricane intensity to various microphysical processes and model grid resolutio will be examined. This will be mainly achieved by performing sensitivity tests using various horizontal (from 1-to 5-km) and vertical resolutions (from 20- to 200-m in the lower troposphere to 200- to 500m in the middle and upper troposphere). Sensitivity test using various microphysical schemes (warm rain only, and three ice with either graupel or hail) will also be performed. The thermodynamic and water budget associated with various types of precipitation systems will also be evaluated. The budgets will be calculated for different regions (i.e., convective and stratiform regions).

Tao, Wei-Kuo↗
NASA NTRS1984

A dynamical basis for the parameterization of organized deep convection in large-scale numerical models

A hierarchy of steady, nonlinear, semianalytic models of different types of convection were produced. These provide a theoretical framework for determining cloud outflow fluxes of both dynamic and thermodynamic quantities, which can be used to formulate dynamical transports in parameterization schemes. This was achieved by exploiting certain Lagrangian conservation properties of steady flow, from which an equation for the vertical displacement of particles can be obtained and the outflow entropy, energy and momentum fluxes and the infow/outflow mass fluxes can be determined from solution to the equation. These fluxes are determined in terms of grid scale parameters such as convective available potential energy (CAPE), cloud layer shear, and horizontal pressure gradients. Five main types of system models are identified, respectively representing archtypes of convection in zero shear, large shear, midlatitude squall lines, tropical squall lines and cellular convection. The downdraught is an important aspect in the first four of these and the cloud scale transport of momentum is very distinctive.

Moncrieff, M. W.↗
NASA NTRS1983

Experiments on the retrieval of cloud parameters from the AMMS and MCR data

In the present experiment, Advanced Microwave Moisture Sounder (AMMS), Multispectral Cloud Radiometer (MCR) and lidar data collected during the Cooperative Convective Precipitation Experiment are combined in order to accomplish the retrieval of cloud top heights, temperatures, and integrated ice contents. It is demonstrated that the relationships among upwelling brightness temperatures obtained by AMMS channels are highly dependent on cloud properties. The retrieval of total ice content is achieved through the use of MCR and lidar data in determining cloud top height and temperature prior to the application of AMMS data.

Yeh, H.-Y. M.↗
NASA NTRS1984

The past, present, and anticipated future contributions of geosynchronous satellites to short range prediction

Use of geosynchronous satellites to improve the short range prediction of convective and mesoscale phenomena by measuring cloud parameters; surface temperature; and temperature and moisture profiles and gradients (in clear and partly cloudy areas) with temporal resolutions of minutes, and spatial scales ranging from 1 km (for clouds) to tens to kilometers (temperature and moisture profiles) is discussed. Improvements can be made with microwave sounding (temperature and moisture profiles in cloudy areas) and imaging (precipitation). Higher spectral resolution infrared sounding yields a 50% better vertical resolution for temperature and moisture profiles. Very high resolution imaging (infrared resolution of 1 km, visible resolution of 200 m) is advocated for convection monitoring.

Shenk, W. E.↗
NASA NTRS2008

Evidence of Mineral Dust Altering Cloud Microphysics and Precipitation

Multi-platform and multi-sensor observations are employed to investigate the impact of mineral dust on cloud microphysical and precipitation processes in mesoscale convective systems. It is clearly evident that for a given convection strength,small hydrometeors were more prevalent in the stratiform rain regions with dust than in those regions that were dust free. Evidence of abundant cloud ice particles in the dust sector, particularly at altitudes where heterogeneous nucleation process of mineral dust prevails, further supports the observed changes of precipitation. The consequences of the microphysical effects of the dust aerosols were to shift the precipitation size spectrum from heavy precipitation to light precipitation and ultimately suppressing precipitation.

Min, Qilong↗