SEARCH · Engineering Papers

Results for “Closure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

All sources NASA NTRS DOE OSTI

NASA NTRS2021

Environmental Control and Life Support (ECLS) Systems

Environmental control and life support (ECLS)systems provide the conditions necessary to maintain astronaut's health during a mission. They have been a part of every human-rated vehicle from Mercury onward, from carbon dioxide scrubbers and drink bags, to sophisticated air and water recovery technologies. In order to enable human exploration beyond low Earth orbit for an extended time, such as a mission to Mars, closed-loop life support, the continuous use, reuse, and recycling of air, water, and waste will be necessary. This chapter provides a brief history of air revitalization, wastewater, and solid waste recovery systems from the early spaceflight era to the present, potential technologies in development to facilitate further loop closure, and considerations for future life support system development in support of exploration

Life support↗

NASA NTRSDate not supplied

Composite Progressive Delamination Analysis of Thin Ply Buckling

The NASA Advanced Composites Project is a multi-year consortium of government, industry and academia to develop and validate technology that will reduce development and certification of advanced composite materials for aircraft structures. One of its tasks is to simulate and predict composite damage progression accurately through high fidelity finite element models. It included a subtask to verify an approach based on the Virtual Crack Closure Technology (VCCT) as well as Floating Node Method (FNM). This paper discusses predicted damage onset and growth in a thin-ply buckling problem. Sensitivity of the simulations to various initial crack length is studied. The compressive load-displacement curves are plotted and the crack growth critical load is predicted. Overall, the crack progression follows simulation benchmarks well. However, the critical-load overshoot phenomenon is observed in both VCCT and FNM, suggesting further investigation may be worth pursuing.

damage progression↗

NASA NTRS2026

Thermochemically-Closed Sonic-Flow Inversion for Enthalpy and Temperature in Multispecies Arc-Jet Flows

A thermochemically-closed sonic-flow inversion framework (TSIF) is developed to infer bulk enthalpy and total temperature upstream of a choked nozzle in arc-jet flows. The formulation recasts a pressure-rise total enthalpy quantification technique as an inverse problem in characteristic-velocity c * space using measured mass flow rate, upstream total pressure, gas composition, and nozzle throat geometry as inputs. Unlike calorimetric energy-balance approaches or optical diagnostics, the method relies primarily on routinely measured facility quantities combined with explicit thermochemical closure. Thermochemical states are obtained using NASA’s open-source Chemical Equilibrium with Applications (CEA) code, enabling construction of a chemistry-consistent relation between characteristic velocity, total enthalpy, and total temperature under equilibrium or frozen assumptions. A discharge coefficient is self-calibrated using cold-flow (arc-off) operation data and applied to hot-flow (arc-on) measurements, enabling upstream losses to be accounted for without empirical correlations. The framework is applied to air, N 2 , and CO 2 –N 2 arc-jet flows and demonstrates expected trends for the inferred thermochemical states as function of arc power, specific energy input, mass-flow, heater configuration, and test gas. In the air limit, under equilibrium assumptions, the method recovers the classical high-enthalpy asymptotic correlation of Winovich with a mean residual of 4.4%, demonstrating compatibility with established sonic-flow scaling, while extending applicability to arbitrary multi-species mixtures and non-equilibrium chemistry. The framework provides a mixture-flexible methodology for determining bulk thermochemical states in modern arc-jet environments using routine facility pressure, mass-flow, gas-composition, and nozzle-geometry information together with a cold-flow calibration.

stagnation heat flux↗

NASA NTRS2026

Thermochemically-Closed Sonic-Flow Inversion for Enthalpy and Temperature in Multispecies Arc-Jet Flows

inviscid theory↗

DOE OSTI2020

Cigeo Design Options, Risks and Opportunities Management: A Continuous Project Management Goal - 20015

Andra is currently completing the detailed engineering phase of the stepwise design development of Cigeo, the French HLW and IL-LLW Deep Geological Repository. If licensed in the coming years, Cigeo's progressive construction, industrial operation and closure will last over more than a century. Such a duration, associated with the requirements in terms of reversibility, lead to the choice of an incremental design that allows, for next operator generations, to integrate improvements derived from scientific and technical progress as well as from experience feedback from its operation. This incremental design approach, associated with a permanent risks and opportunities management process, will continue after licensing of Cigeo as a tool for the governance of the reversibility. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2025

The Functor system: a new on-the-fly take on Material Properties based on C++ functions

In the context of solving multiphysics problems, the discretization of the partial differential equations (PDE) at hand often takes the spotlight. However, for most engineering users and even application developers, the discretization of the equations has already been performed. Instead, they are tasked with implementing specific closure relations and material properties. MOOSE has long enabled this using the Materials system. This system relied on the pre-computation of all properties before they are used in the PDE or in postprocessing. In this talk we will introduce the Functor system, which was deployed in MOOSE in 2021, then present a few applications of functors in flow modeling simulations by the NEAMS program. Functors first offer great flexibility in their evaluation. Rather than storing various arrays for material properties, they are evaluated on the fly at the location and state, e.g. current or old value, requested. Unlike regular material properties, several operations such as the time derivative, the divergence and the curl can be requested from a functor. Similar to material properties, functors can be made to depend on arbitrary combinations of variables, functions, postprocessors and other properties. However, unlike material properties, any of these can be substituted for a functor material property. Thanks to this, objects no longer need to be duplicated based on the types of their parameters.

97 - MATHEMATICS AND COMPUTING↗

DOE OSTI2020

Recent Progress on Topological Structures in Ferroic Thin Films and Heterostructures

Topological spin/polarization structures in ferroic materials continue to draw great attention as a result of their fascinating physical behaviors and promising applications in the field of high-density nonvolatile memories as well as future energy-efficient nanoelectronic and spintronic devices. Such developments have been made, in part, based on recent advances in theoretical calculations, the synthesis of high-quality thin films, and the characterization of their emergent phenomena and exotic phases. Herein, progress over the last decade in the study of topological structures in ferroic thin films and heterostructures is explored, including the observation of topological structures and control of their structures and emergent physical phenomena through epitaxial strain, layer thickness, electric, magnetic fields, etc. First, the evolution of topological spin structures (e.g., magnetic skyrmions) and associated functionalities (e.g., topological Hall effect) in magnetic thin films and heterostructures is discussed. Then, the exotic polar topologies (e.g., domain walls, closure domains, polar vortices, bubble domains, and polar skyrmions) and their emergent physical properties in ferroelectric oxide films and heterostructures are explored. Lastly, a brief overview and prospectus of how the field may evolve in the coming years is provided.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Transient Terahertz Oscillations During Photoinduced Polarization Topology Reconfiguration in Ferroelectric Superlattices

Terahertz resonances embedded in crystalline heterostructures could close a spectral gap between conventional electronics and photonics while opening new windows on non-equilibrium lattice dynamics. We show that femtosecond optical screening of the depolarization field in epitaxial PbTiO3/SrTiO3 superlattices launches a collective polar mode that oscillates near 1 THz and coherently spans the entire mini-Brillouin zone. Wave-vector-resolved pump–probe X-ray diffraction resolves a nearly dispersion-less oscillation at 0.87 THz and 0.94 THz at the zone boundary and zone center, respectively, persisting for ~2.5 ps, corresponding to a weakly damped resonance. Dynamical phase-field simulations reveal the origin of the mode to mesoscopic rotation of closure-domain textures during the photo-excited transition from an unscreened to a screened electrostatic state. Varying the PbTiO3 and SrTiO3 ratio tunes the mode frequency continuously from 0.9 to 1.4 THz, providing a quantitative design rule for frequency-selectable THz oscillators in ferroelectric heterostructures. By coupling nanoscale polarization reconfiguration to long-wavelength coherent dynamics, this work establishes depolarization-field engineering to topology-driven THz functionality and expanding the landscape of collective lattice dynamics.

Sri Gyan, Deepankar [Univ. of Wisconsin, Madison, ↗

DOE OSTI2026

Catalytic Autoxidation for Depolymerization of Multilayer Plastic Films

Recycling multilayer plastic films is challenged by a diversity of polymers, prompting development of new recycling methods. For the depolymerization of mixed polymers like those in multilayer films, metal-catalyzed autoxidation offers a versatile chemical recycling method to deconstruct multiple polymers to useful oxygenates. Here, we demonstrate that catalytic autoxidation is effective for depolymerizing multilayer films across diverse chemistries. We investigated conditions for a model polyethylene substrate using a Co, Mn, and Br cocatalyst system, achieving full carbon closure with oxygenated small molecules contributing up to 48 mol% carbon. Subsequently, we characterized product distributions for several common polymers used in multilayer films using high-resolution mass spectrometry (HRMS) and developed analytical methods to quantify the resulting complex product streams. Optimized conditions for polyethylene were applied to 11 multilayer plastic films containing 10 different polymers, including films with nonpolymeric potential disrupters like aluminum foil and titanium dioxide, showing that catalytic autoxidation is effective across a broad range of polymer types and is resistant to disrupters and additives. The generation of CO 2 in these reactions overall suggests that both reaction engineering and modifications to the reaction conditions will be required to achieve higher yields of soluble oxygenated products.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Water use in a young Pinus taeda bioenergy plantation: Effect of intensive management on stand evapotranspiration

Abstract The increasing demand for plant‐derived bioenergy is projected to expand tree plantations with intensive silviculture and improved tree genetics. These silvicultural practices result in faster stand development and canopy closure, which may also influence the systems' water dynamics. Here, we studied the evapotranspiration (ET) of a young (5 years old) intensively managed loblolly pine ( Pinus taeda ) stand and investigated the components of ET to determine its contribution to overall water use. We also compared ET with plantations that received less intensive management to determine whether our stand used more water. We used the eddy covariance method to estimate ecosystem‐level total ET (ET EC ), while plot‐level estimates of ET (ET P ) were obtained via soil lysimeters, sap flow sensors, and throughfall collectors, enabling measurement of the components of ET. Soil evaporation (Es) was the largest component of ET P (36%) over the course of the study, while transpiration and canopy interception accounted for 27% and 22%, respectively. Es decreased with stand development, while transpiration and canopy interception increased. Leaf area index (LAI) and precipitation were the most significant factors controlling ET and its components. Compared to previous studies in different sites that have similar age but lower LAI, our stand had higher water use. This high water use in the early stages of stand development was primarily due to high Es before the canopy was fully developed. While there are potential sources of uncertainty when comparing ET EC and the component fluxes in ET P , results from the two methods were not significantly different. This study had the advantage of using multiple methods to understand and verify the component processes that contribute to ET. Therefore, we recommend that multiple measurement techniques be used in the long‐term observation of ET, and in particular for the evaluation of the impact that intensively managed forests have on water resources in the southeastern United States.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Robust 3D multi-material hydrodynamics using discontinuous Galerkin methods

A high-order discontinuous Galerkin (DG) method is presented for nonequilibrium multi-material (m ≥ 2) flow with sharp interfaces. Material interfaces are reconstructed using the algebraic THINC approach, resulting in a sharp interface resolution. The system assumes stiff velocity relaxation and pressure nonequilibrium. The presented DG method uses Dubiner's orthogonal basis functions on tetrahedral elements. This results in a unique combination of sharp multimaterial interfaces and high-order accurate solutions in smooth single-material regions. A novel shock indicator based on the interface conservation condition is introduced to mark regions with discontinuities. Slope limiting techniques are applied only in these regions so that nonphysical oscillations are eliminated while maintaining high-order accuracy in smooth regions. A local projection is applied on the limited solution to ensure discrete closure law preservation. The effectiveness of this novel limiting strategy is demonstrated for complex three-dimensional multi-material problems, where robustness of the method is critical. The presented numerical problems demonstrate that more accurate and efficient multi-material solutions can be obtained by the DG method, as compared to second-order finite volume methods.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2020

Formation of phenanthrene via H–assisted isomerization of 2–ethynylbiphenyl produced in the reaction of phenyl with phenylacetylene

Model chemistry G3(MP2,CC)//B3LYP/6–311G(d,p) calculations of the potential energy surface for the reaction of phenyl radical (C 6 H 5 ) with phenylacetylene (C 8 H 6 ) have been carried out and combined with Rice–Ramsperger–Kassel–Marcus/Master Equation calculations of temperature– and pressure–dependent rate constants. The results showed that the reaction can serve as a viable source for the formation of phenanthrene via an indirect route involving a primary reaction of phenyl addition to the ortho carbon in the ring of phenylacetylene and H elimination producing 2–ethynylbiphenyl followed by secondary H–assisted isomerization of 2–ethynylbiphenyl to phenanthrene. In the secondary reaction, the H atom adds to the α carbon of the ethynyl side chain, then a six–member ring closure takes place followed by aromatization via an H loss. The channel of H addition to the side chain of 2–ethynylbiphenyl appears to be much faster than H addition to the ortho carbon in the ethynyl–substituted ring leading back to the initial C 6 H 5 + C 8 H 6 reactants. Rate constants for the primary C 6 H 5 + C 8 H 6 ⇌2–ethynylbiphenyl (p1) + H and secondary p1 + H⇌phenanthrene (p2) + H reactions have been computed in the temperature range of 500–2500 K at pressures of 30 Torr, 1, 10, and 100 atm and fitted to modified Arrhenius expressions. Here, the suggested kinetic scheme and rate constants are proposed as a prototype for the modeling of the growth of polycyclic aromatic hydrocarbons via the phenyl addition–dehydrocyclization (PAC) mechanism involving an addition of a PAH radical to an ethynyl–substituted PAH molecule.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

An anisotropic viscoplasticity model for shale based on layered microstructure homogenization

Viscoplastic deformation of shale is frequently observed in many subsurface applications. Many studies have suggested that this viscoplastic behavior is anisotropic—specifically, transversely isotropic—and closely linked to the layered composite structure at the microscale. In this work, we develop a two-scale constitutive model for shale in which anisotropic viscoplastic behavior naturally emerges from semianalytical homogenization of a bilayer microstructure. The microstructure is modeled as a composite of soft layers, representing a ductile matrix formed by clay and organics, and hard layers, corresponding to a brittle matrix composed of stiff minerals. This layered microstructure renders the macroscopic behavior anisotropic, even when the individual layers are modeled with isotropic constitutive laws. Using a common correlation between clay and organic content and magnitude of creep, we apply a viscoplastic modified Cam-Clay plasticity model to the soft layers, while treating the hard layers as a linear elastic material to minimize the number of calibration parameters. We then describe the implementation of the proposed model in a standard material update subroutine. The model is validated with laboratory creep data on samples from three gas shale formations. We also demonstrate the computational behavior of the proposed model through simulation of time-dependent borehole closure in a shale formation with different bedding plane directions.

58 GEOSCIENCES↗

DOE OSTI2024

Data‐driven variational method for discrepancy modeling: Dynamics with small‐strain nonlinear elasticity and viscoelasticity

Abstract The effective inclusion of a priori knowledge when embedding known data in physics‐based models of dynamical systems can ensure that the reconstructed model respects physical principles, while simultaneously improving the accuracy of the solution in the previously unseen regions of state space. This paper presents a physics‐constrained data‐driven discrepancy modeling method that variationally embeds known data in the modeling framework. The hierarchical structure of the method yields fine scale variational equations that facilitate the derivation of residuals which are comprised of the first‐principles theory and sensor‐based data from the dynamical system. The embedding of the sensor data via residual terms leads to discrepancy‐informed closure models that yield a method which is driven not only by boundary and initial conditions, but also by measurements that are taken at only a few observation points in the target system. Specifically, the data‐embedding term serves as residual‐based least‐squares loss function, thus retaining variational consistency. Another important relation arises from the interpretation of the stabilization tensor as a kernel function, thereby incorporating a priori knowledge of the problem and adding computational intelligence to the modeling framework. Numerical test cases show that when known data is taken into account, the data driven variational (DDV) method can correctly predict the system response in the presence of several types of discrepancies. Specifically, the damped solution and correct energy time histories are recovered by including known data in the undamped situation. Morlet wavelet analyses reveal that the surrogate problem with embedded data recovers the fundamental frequency band of the target system. The enhanced stability and accuracy of the DDV method is manifested via reconstructed displacement and velocity fields that yield time histories of strain and kinetic energies which match the target systems. The proposed DDV method also serves as a procedure for restoring eigenvalues and eigenvectors of a deficient dynamical system when known data is taken into account, as shown in the numerical test cases presented here.

Masud, Arif↗

DOE OSTI2024

Harmonizing direct and indirect anthropogenic land carbon fluxes indicates a substantial missing sink in the global carbon budget since the early 20th century

Inconsistencies in the calculation of the two anthropogenic land flux terms of the global carbon cycle are investigated. The two terms—the direct anthropogenic flux (caused by direct human disturbance in anthromes, currently a carbon source to the atmosphere) and the indirect anthropogenic flux (caused indirectly by human activities that lead to global change and affecting all biomes, currently an atmospheric carbon sink)—are typically calculated independently, resulting in inconsistent underlying assumptions. We harmonize the estimation of the two anthropogenic land flux terms by incorporating previous estimates of these inconsistencies. We recalculate the global carbon budget (GCB) and apply change-point analysis to the cumulative budget imbalance. Cumulative over 1850–2018 (1959–2018), harmonization results in a 13% lesser (4% greater) land use source from anthromes and a 20% (23%) lesser land sink. This recalculation yields a greater non-closure of the GCB, indicating a missing carbon sink averaging 0.65 Pg C year -1 since the early 20th century. The imbalance likely results from a combination of method discontinuity and structural errors in the assessment of the direct anthropogenic land use flux, greater ocean carbon uptake, structural errors in land models, and in how these land terms are quantified for the budget. We caution against overconfidence in considering the GCB a solved problem and recommend further study of methodological discontinuities in budget terms. We strongly recommend studies that quantify the direct and indirect anthropogenic land fluxes simultaneously to ensure consistency, with a deeper understanding of human disturbance and legacy effects in anthromes.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Crystal structures of Salmonella enterica FraB deglycase reveal a conformational heterodimer with remarkable structural plasticity at the active site

Abstract Thefralocus ofSalmonella entericaencodes five genes for metabolism of fructose‐asparagine, an Amadori product formed by condensation of asparagine with glucose. In the last step of this pathway, the FraB deglycase cleaves 6‐phospho‐fructose‐aspartate into glucose‐6‐phosphate and aspartate. In homology models, FraB forms a homodimer with two equivalent active sites located at the dimer interface. E214 and H230, two invariant residues essential for catalysis, project into each active site cleft from opposing subunits of the dimer. Here, we have determined six crystal structures of FraB, three of a variant containing an N‐terminal His 6 tag and two mutations needed for crystallization (hereafter referred to as WT′), two with additional mutations to active site residues (E214A and P232A), and one of a variant with C‐terminal residues 313–325 deleted. Surprisingly, in the WT′ FraB structure, the two catalytic residues, E214 (general base) and H230 (general acid), are positioned ~22 Å apart. In the E214A and C‐terminus‐truncated FraB variants, however, a conformational change in the E214‐residing helix brings E214 and H230* to ~7 Å (* indicates residue from the second protomer that creates the inter‐subunit catalytic center). The loop bearing H230 also exhibits significant variation, ranging from being completely disordered to adopting open or closed states, with the nearby P232* residue being eithercisortrans. The C‐terminal residues 313–325 form a flexible “C‐tail” that can be fully disordered, bind in the active site to block access of substrate, or angle across the active site to wrap across the other subunit of the dimer and potentially close over substrate. Collectively, these structures reveal that FraB is a conformational heterodimer with two chemically identical subunits that are constrained to adopt different structures as they come together for catalysis. This plasticity likely involves correlated opening and closure of the two active sites for their respective binding and release of substrates and ligands.

Biochemistry & Molecular Biology↗

DOE OSTI2022

A two-fluid single-column model of turbulent shallow convection, Part III: Results and parameter sensitivity

Two-fluid modelling has recently emerged as a promising approach to representing cumulus convection in weather and climate models. This study applies the two-fluid model described in Part II Thuburn et al., 2021b to a shallow cumulus convection case study over land (ARM). Large eddy simulation data is used to tune the majority of the closures that determine the properties of entrained and detrained air. The two-fluid model is generally able to reproduce the profiles of the mean and turbulent quantities over all stages of the diurnal cycle. As such, the initiation of shallow convection and the evolution of the cloud layer are well captured. The robustness of the two-fluid model is further verified using a steady-state test case (BOMEX), in which the cloud properties are also well modelled.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

The role of thermal stratification on the co‐spectral properties of momentum transport above an Amazonian forest

The influence of thermal stratification on the turbulent kinetic energy balance has been widely studied; however, its influence on the turbulent stress remains less explored in the presence of tall vegetated canopies and less ideal micrometeorological conditions. Here, the impact of thermal stratification on turbulent momentum flux is considered in the roughness sublayer (RSL) and the atmospheric surface layer (ASL) using the Amazon Tall Tower Observatory (ATTO) in Brazil. A scalewise co‐spectral budget (CSB) model is developed using standard closure schemes for the pressure–velocity decorrelation. The CSB revealed that the co‐spectrum ${F}_{wu}\left({k}_x\right)$ between longitudinal (u') and vertical (w') velocity fluctuations is impacted by the energy spectrum of the vertical velocity ${E}_{ww}\left({k}_x\right)$ and the much less studied longitudinal heat‐flux co‐spectrum ${F}_{u{\theta}_{\mathrm{v}}}\left({k}_x\right)$, where ${\theta}_{\mathrm{v}}^{\prime }$ are temperature fluctuations and ${k}_x$ is the longitudinal wavenumber. Under stable, very stable, and dynamic–convective conditions, the scaling exponent ${F}_{wu}\left({k}_x\right)$ in for the inertial subrange (ISR) scales is dominated by ${F}_{u{\theta}_{\mathrm{v}}}\left({k}_x\right)$ instead of ${E}_{ww}\left({k}_x\right)$. A near ${k}_x^{-7/3}$scaling in ${F}_{u{\theta}_{\mathrm{v}}}\left({k}_x\right)$ robust to large variations in thermal stratification is found, whereas the Kolmogorov ISR scaling for ${E}_{ww}\left({k}_x\right)\sim {k}_x^{-5/3}$ is not found. The scale‐dependent decorrelation time between u' and w' is dominated by ${\epsilon}^{-1/3}{k}_x^{-2/3}$ in the ISR, but is nearly constant for eddies larger than the vertical velocity integral scale, regardless of stability. Implications of these findings for generalized stability correction functions that are based on the turbulent stress budget instead of the turbulent kinetic energy budget are discussed.

canopy turbulence↗