Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COMPARATOR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Search for a bound di-neutron by comparing 3 He(e,e'p)d and 3 H(e,e'p)X measurements

We report on a search for a bound di-neutron by comparing electron-induced proton-knockout $(e,e'p)$ measurements from Helium-3 ($^3$He) and Tritium ($^3$H). The measurements were performed at Jefferson Lab Hall A with a 4.326 GeV electron beam, and kinematics of large momentum transfer $Q^2 \approx 1.9$ (GeV/$c$)$^2$ and $x_B>1$, to minimize contributions from non quasi-elastic (QE) reaction mechanisms. Analyzing the measured $^3$He missing mass ($M_{miss}$) and missing energy ($E_{miss}$) distributions, we can distinguish the two-body break-up reaction, in which the residual proton-neutron system remains bound as a deuteron. In the $^3$H mirror case, under the exact same kinematic conditions, we do not identify a signature for a bound di-neutron with similar binding energy to that of the deuteron. We calculate exclusion limits as a function of the di-neutron binding energy and find that, for binding equivalent to the deuteron, the two-body break-up cross section on $^3$H is less than 0.9% of that on $^3$He in the measured kinematics at the 95% confidence level.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Comparing light-front quantization with instant-time quantization

Here in this paper we compare light-front quantization and instant-time quantization both at the level of operators and at the level of their Feynman diagram matrix elements. At the level of operators light-front quantization and instant-time quantization lead to equal light-front time commutation (or anticommutation) relations that appear to be quite different from equal instant-time commutation (or anticommutation) relations. Despite this we show that at unequal times instant-time and light-front commutation (or anticommutation) relations actually can be transformed into each other, with it only being the restriction to equal times that makes the commutation (or anticommutation) relations appear to be so different. While our results are valid for both bosons and fermions, for fermions there are subtleties associated with tip of the light cone contributions that need to be taken care of. At the level of Feynman diagrams we show for non-vacuum Feynman diagrams that the pole terms in four-dimensional light-front Feynman diagrams reproduce the widely used three-dimensional light-front on-shell Hamiltonian Fock space formulation in which the light-front energy and light-front momentum are on shell. Moreover, we show that the contributions of pole terms in non-vacuum instant-time and non-vacuum light-front Feynman diagrams are equal. However, because of circle at infinity contributions we show that this equivalence of pole terms fails for four-dimensional light-front vacuum tadpole diagrams. Then, and precisely because of these circle at infinity contributions, we show that light-front vacuum tadpole diagrams are not only nonzero, they quite remarkably are actually equal to the pure pole term instant-time vacuum tadpole diagrams. Light-front vacuum diagrams are not correctly describable by the on-shell Hamiltonian formalism, and thus not by the closely related infinite momentum frame prescription either. Thus for the light-front vacuum sector we must use the off-shell Feynman formalism as it contains information that is not accessible in the on-shell Hamiltonian Fock space approach. We show that light-front quantization is intrinsically nonlocal, and that for fermions this nonlocality is present in Ward identities. One can project fermion spinors into so-called good and bad components, and both of these components contribute in Ward identities. Central to our analysis is that the transformation from instant-time coordinates and fields to light-front coordinates and fields is a unitary, spacetime-dependent translation. Consequently, not only are instant-time quantization and light-front quantization equivalent, because of general coordinate invariance they are unitarily equivalent.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Analytic evaluation of hydrogen neutron elastic scattering moments with free-gas thermal treatment compared to NJOY

In this article, we present an analytic approach to evaluate Legendre moments of hydrogen neutron elastic scattering differential cross section, with and without free-gas thermal treatment. The results for the zero-th (P 0 ) and first (P 1 ) moments are given and compared against a 138-group cross sections produced by NJOY. An MCNP thin-wire test was employed as an independent verification for our analytic model for the free-gas zero-th moment. Excellent agreement was observed between the analytic result and MCNP prediction. They both suggest that an increased thermal cut-off in NJOY THERMR module is advisable for higher accuracy. Discrepancy was also found between the analytic model and NJOY multi-group cross section for the first order Legendre moments of the differential cross section, which might indicate a numerical anomaly in NJOY.

NJOY↗
DOE OSTI2023

Reserve and energy scarcity pricing in United States power markets: A comparative review of principles and practices

Here, errors in forecasting load and renewable-based generation in restructured power systems mean that independent system operators (ISOs) must procure sufficient operating reserves to keep the real-time operation of the system reliable and secure. But when procured reserves turn out to be insufficient in real-time due to the lack of resource capacity or ramp capability, operators often set higher prices for reserves and energy to encourage more supply, and to motivate consumers to decrease usage or shift it to other times. This procedure, which is called scarcity or shortage pricing, is a core feature of U.S. electricity markets. It is receiving increased attention from market designers and stakeholders because scarcity will become more important for spot price formation in the future with the increased penetration of zero-marginal cost renewables, and the shrinking role of fuel costs in setting prices. Scarcity pricing is implemented in various ways by different ISOs. These differences have practical implications for the level of prices and incentives for investment, operations, and demand modification. In this paper, general approaches and specific calculation procedures for reserve and energy scarcity pricing practices and calculations across the seven ISO-based U.S. power markets are reviewed and compared. A consistent terminology is used to facilitate the comparison. Current scarcity pricing practices are grouped into three approaches: (1) imposing an adder after the spot market is run; (2) including stepwise demand curves within market clearing procedures for non-contingency reserve products (e.g., the novel flexiramp product), which tends to yield longer right tails for energy scarcity premium curves; and (3) having stepwise demand curves for traditional contingency reserve products only, which results in shorter right tails in energy scarcity curves. A generic numerical example is presented to highlight the large practical differences among the reserve scarcity pricing approaches and specific implementations. To further investigate factors that contribute the most to demand curves differences among ISOs, a sensitivity analysis is performed. This analysis shows that the largest source of differences among the curves is the scarcity prices assumed in the case of severe scarcity, while the number of steps used and whether flexiramp is considered also yields important differences in scarcity prices. As renewable penetration increases, it will become increasingly crucial to employ administrative demand curves so that spot prices more effectively motivate supply and demand adjustments exactly when and where they are needed. This study shows that the different assumptions yield very different scarcity premiums for reserves and energy, and are likely to provide divergent incentives for resources to respond to shortages. It is concluded that to promote market efficiency, a reserve shortage demand curve should have at least three features: inclusion of the marginal value of reserve products at each shortage level, consideration of the magnitude and probability of supply contingencies, and avoidance of abrupt price discontinuities that can cause excessively volatile market outcomes.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2025

A comparative review on cold sprayed cermet coatings and their applications in high temperature corrosion, oxidation and wear resistance

This review article explores the properties and bonding mechanisms specific to cold sprayed cermet coatings, highlighting its contrast with that of pure metals, and pure ceramics. The general cost structure of cold spraying is compared with other thermal spray techniques and the advantages are highlighted. Several cold sprayed cermet coatings with good corrosion, oxidation and wear resistance behavior in elevated temperatures show convincing potential for applications in power generation industries. The important factors that are attributed to producing highly functional cold sprayed cermet coatings are discussed. A strategic approach involving material, equipment, and application specific optimization of the cold spray process is currently relevant and of utmost importance to meet the coating requirements in several industrial applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Comparing the cooling effectiveness of operationalisable urban surface combination scenarios for summer heat mitigation

Extreme summer heat in cities exacerbates the vulnerability of urban communities to heatwaves. Vegetative and reflective urban surfaces can help reduce urban heat. This study investigated the impacts of urban trees, green roofs and cool roofs on heat mitigation during average and extreme summer conditions in temperate oceanic Melbourne, Australia. We simulated the city climate using ‘The Air Pollution Model’ (TAPM) at a 1 km spatial resolution over 10 years, which according to our review of the literature, was the most prolonged period for simulation in Melbourne. During a widespread heatwave event, some of the tested scenarios with combined surface parameters could reduce the extreme values of the energy budget components- sensible heat, latent heat, and storage heat fluxes up to seasonal averages compared to the existing situation for Melbourne (control). The scenario with the highest (reasonable maximum) ground-level vegetation, green roofs, and cool roofs could reduce air temperatures up to 2.4 °C. The simulations suggest that a combined strategy with vegetative and high-albedo surfaces will deliver higher effectiveness with maximum cooling benefits and cost-effectiveness than individual strategies in cities. These results suggest the importance of collaborative strategic planning of urban surfaces to make cities healthier, sustainable, and liveable.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

A comparative analysis of green building rating systems in China and the United States

Several studies have compared green building rating systems (GBRSs) in China and the United States, Nonetheless, few studies included in-depth analysis on specific rating tools with project specific data validating green building technologies and actual performance. This study conducted a comprehensive data-driven comparison of the GBRSs of China and the United States. The goal was to understand the current status and further improve China's GBRS and promote green building technologies. The study first conducted thorough comparisons of GBRSs in China and the U.S. by selecting a series of distinct rating tools. Then, it analyzed each tool's development objectives, contents, and rating score settings. Further, the comparison concludes the future development needs for China's GBRS. In addition to standard comparison, green building technologies applied in certified projects were also summarized. The results demonstrated that GBRSs in both China and the U.S. reflect well the technical paths to achieve green building sustainable development. By analyzing certified projects, it was also found that the incremental costs of green building technologies were controllable. Finally, based on the comparison and case analysis, the study provide a set of policy recommendations to further improve China's green building standards.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Comparing plant litter molecular diversity assessed from proximate analysis and 13 C NMR spectroscopy

Accurate representation of the chemical diversity of litter in ecosystem-scale models is critical for improving predictions of decomposition rates and stabilization of plant material into soil organic matter. In this contribution, we conducted a systematic review to evaluate how conventional characterization of plant litter quality using proximate analysis compares with molecular-scale characterization using 13 C NMR spectroscopy. Using a molecular mixing model, we converted chemical shift regions from NMR into fractions of carbon (C) in five organic compound classes that are major constituents of plant material: carbohydrates, proteins, lignins, lipids, and carbonylic compounds. We found positive correlations between the acid soluble fraction and carbohydrates, and between the acid insoluble fraction and lignins. However, the acid-soluble fraction underestimated carbohydrates, and the acid insoluble fraction overestimated lignins by 243%. We identified two sources of uncertainties: i) disparities between litter chemical composition based on hydrolysability and actual chemical composition obtained from NMR and ii) conversion factors to translate proximate fractions into organic constituents. Both uncertainties are critical, potentially leading to misinterpretations of decay rates in litter decomposition models. Consequently, we recommend including explicit substrate chemistry data in the next generation of litter decomposition models.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Comparative Analysis of Rear Irradiance Modeling Methods for Bifacial PV Systems on Single-Axis Trackers Under Varying Albedo Conditions

This study compares three rear-side irradiance modeling methods for bifacial PV systems on single-axis trackers: (i) the 2D View Factor (VF) model in PVsyst(R), (ii) the open-source PVFactors VF model, and (iii) the Ray Tracing (RT) technique using bifacial_radiance. Simulations were benchmarked against field measurements from a pilot PV plant with rear-side sensors at the torque tube height. Results show that all models underestimated the non-uniformity of rear irradiance along the module length and overestimated the total rear irradiance incident on the module. However, since bifacial gain represents only a fraction of the system's total energy, the resulting energy yield differences among methods remained within +- 2 % of measured values, which is typical for such simulations. While the overall energy impact is limited, this study characterizes the specific limitations of each modeling approach, supporting further improvements in bifacial PV performance assessment methods.

14 SOLAR ENERGY↗
DOE OSTI2020

Comparing the performance of density functionals in describing the adsorption of atoms and small molecules on Ni(111)

Reaction networks calculated using density functional theory (DFT) play a crucial role in understanding and predicting heterogeneous catalyst performance. However, results obtained using different density functionals can vary significantly. Accordingly, it is important to assess the accuracy of available functionals in capturing adsorption energetics derived from single-crystal adsorption microcalorimetry experiments. Here, we evaluate how different density functionals describe the molecular and dissociative adsorption of CH 3 I, the adsorption of CH 3 , I, and H, and the dissociative adsorption of CH 4 on Ni(111). First, we identify energetically-preferred adsorbed states for each adsorbate at three surface coverages and calculate the corresponding enthalpies of adsorption at 160 K. Then, we compare the results to experimental measurements published in the literature. For each adsorption process we find at least one functional that is quantitatively accurate within experimental error, but no functional is accurate (within experimental error) for all adsorption processes studied. Even when assuming an additional DFT error of ±20 kJ/mol on top of the experimental error, only the PBE-D3 and RPBE-D3 functionals are accurate for all considered adsorption systems. Overall, these results indicate that quantitative agreement between density functional theory calculations and experimental measurements is both system- and functional-dependent. Importantly, single-crystal adsorption microcalorimetry experiments will continue to play an important role for benchmarking density functionals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2013

Human and animal health risk assessments of chemicals in the food chain: Comparative aspects and future perspectives

Chemicals from anthropogenic and natural origins enter animal feed, human food and water either as undesirable contaminants or as part of the components of a diet. Over the last five decades, considerable efforts and progress to develop methodologies to protect humans and animals against potential risks associated with exposure to such potentially toxic chemicals have been made. This special issue presents relevant methodological developments and examples of risk assessments of undesirable substances in the food chain integrating the animal health and the human health perspective and refers to recent Opinions of the Scientific Panel on Contaminants in the Food Chain (CONTAM) of the European Food Safety Authority (EFSA). This introductory review aims to give a comparative account of the risk assessment steps used in human health and animal health risk assessments for chemicals in the food chain and provides a critical view of the data gaps and future perspectives for this cross-disciplinary field. - Highlights: ► Principles of human and animal health risk assessment. ► Data gaps for each step of animal health risk assessment. ► Implications of animal risk assessment on human risk assessment. ► Future perspectives on chemical risk assessment.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2017

A tissue dose-based comparative exposure assessment of manganese using physiologically based pharmacokinetic modeling—The importance of homeostatic control for an essential metal

A physiologically-based pharmacokinetic (PBPK) model (Schroeter et al., 2011) was applied to simulate target tissue manganese (Mn) concentrations following occupational and environmental exposures. These estimates of target tissue Mn concentrations were compared to determine margins of safety (MOS) and to evaluate the biological relevance of applying safety factors to derive acceptable Mn air concentrations. Mn blood concentrations measured in occupational studies permitted verification of the human PBPK models, increasing confidence in the resulting estimates. Mn exposure was determined based on measured ambient air Mn concentrations and dietary data in Canada and the United States (US). Incorporating dietary and inhalation exposures into the models indicated that increases in target tissue concentrations above endogenous levels only begin to occur when humans are exposed to levels of Mn in ambient air (i.e. > 10 μg/m{sup 3}) that are far higher than those currently measured in Canada or the US. A MOS greater than three orders of magnitude was observed, indicating that current Mn air concentrations are far below concentrations that would be required to produce the target tissue Mn concentrations associated with subclinical neurological effects. This application of PBPK modeling for an essential element clearly demonstrates that the conventional application of default factors to “convert” an occupational exposure to an equivalent continuous environmental exposure, followed by the application of safety factors, is not appropriate in the case of Mn. PBPK modeling demonstrates that the relationship between ambient Mn exposures and dose-to-target tissue is not linear due to normal tissue background levels and homeostatic controls. - Highlights: • Manganese is an essential nutrient, adding complexity to its risk assessment. • Nonlinearities in biological processes are important for manganese risk assessment. • A PBPK model was used to estimate target tissue concentrations of manganese. • An MOS approach also considered target tissue concentrations for ambient exposures. • Relationships between ambient Mn exposures and dose-to-target tissue are not linear.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2017

Pharmacokinetics of opicapone, a third-generation COMT inhibitor, after single and multiple oral administration: A comparative study in the rat

Opicapone is a novel potent, reversible and purely peripheral catechol-O-methyltransferase inhibitor that has been developed to be used as an adjunct to levodopa/aromatic L-amino acid decarboxylase inhibitor therapy for Parkinson's disease. Thus, this study aimed to compare the plasma pharmacokinetics of opicapone and its active metabolite (BIA 9-1079) after the administration of single and multiple oral doses to rats. Wistar rats (n = 8 per group) were orally treated with single (30, 60 or 90 mg/kg) or multiple (30 mg/kg once-daily for seven consecutive days) oral doses of opicapone. Blood samples were collected up to 24 h post-dosing through a cannula introduced in the tail vein of rats. After quantifying opicapone and BIA 9-1079 in plasma, a non-compartmental pharmacokinetic analysis was performed. Opicapone was quickly absorbed (time to reach the maximum plasma concentration ≤ 2 h) in both dosage regimens and the extent of systemic exposure to opicapone increased approximately in a dose-proportional manner after single-dosing within the studied dose range (30–90 mg/kg). Opicapone and BIA 9-1079 showed a relatively short plasma elimination half-life (1.58–4.50 h) and a small systemic accumulation after multiple-dosing. Hence, no pharmacokinetic concerns are expected when opicapone is administered with a once-daily dosing regimen. - Highlights: • Opicapone is relatively rapid absorbed after oral administration to rats. • Systemic exposure to opicapone increases approximately in a dose-proportional manner. • Opicapone and BIA 9-1079 show a small systemic accumulation after multiple-dosing.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2016

Ecofriendly syntheses of phenothiazones and related structures facilitated by laccase – A comparative study

The biocatalytic synthesis of phenothiazones and related compounds has been achieved in an aqueous system under mild conditions facilitated by laccase oxidation. It was found that by coupling 2-aminothiophenol directly with 1,4-quinones, the product yields could be significantly increased compared to generating the 1,4-quinones in situ from the corresponding hydroquinones via laccase oxidation. However, laccase still proved to be pivotal for achieving highest product yields by catalyzing the final oxidation step. Furthermore, a difference in reactivity of aromatic and aliphatic amines toward 1,4-naphthoquinone is observed. Furthermore, this study provides a sustainable approach to the synthesis of a biologically important class of compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Decomposing passenger transport futures: Comparing results of global integrated assessment models

The transport sector is growing fast in terms of energy use and accompanying greenhouse gas emissions. Integrated assessment models (IAMs) are used widely to analyze energy system transitions over a decadal time frame to help inform and evaluating international climate policy. As part of this, IAMs also explore pathways of decarbonizing the transport sector. This study quantifies the contribution of changes in activity growth, modal structure, energy intensity and fuel mix to the projected passenger transport carbon emission pathways. The Laspeyres index decomposition method is used to compare results across models and scenarios, and against historical transport trends. Broadly-speaking the models show similar trends, projecting continuous transport activity growth, reduced energy intensity and in some cases modal shift to carbon-intensive modes - similar to those observed historically in a business-as-usual scenario. In policy-induced mitigation scenarios further enhancements of energy efficiency and fuel switching is seen, showing a clear break with historical trends. Reduced activity growth and modal shift (towards less carbon-intensive modes) only have a limited contribution to emission reduction. Measures that could induce such changes could possibly complement the aggressive, technology switch required in the current scenarios to reach internationally agreed climate targets.

Edelenbosch, Oreane Y.↗
DOE OSTI2023

Comparing land surface temperature and mean radiant temperature for urban heat mapping in Philadelphia

Many cities are experiencing more frequent extreme heat during hot summers. With the rise of global temperature, the thermal comfort in urban areas become even worse. Quantitative information of the spatial distributions of urban heat has become increasingly important for resilience and adaptation to climate change in cities. This study compares satellite-derived land surface temperature (LST) and urban microclimate modeling-based mean radiant temperature (Tmrt) for mapping the urban heat distributions in Philadelphia, Pennsylvania, USA. Here, the LST was estimated based on Landsat 8 thermal imagery with a spatial resolution of around 100 m, while the Tmrt was simulated based on high resolution LiDAR and national aerial imagery program multispectral aerial imageries with a spatial resolution of 1 m. Result shows that both LST and Tmrt show a similar general pattern of the urban heat across the study area, while the Tmrt presents much more details of the heat variations street by street and neighborhood by neighborhood. The LST tends to have a stronger relationship with the Tmrt on building roofs, which are usually not the place for human activities. This studyprovides evidence for choosing more appropriate metrics in urban heat-related studies.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2011

Quantification of greenhouse gas emissions from waste management processes for municipalities - A comparative review focusing on Africa

The amount of greenhouse gases (GHG) emitted due to waste management in the cities of developing countries is predicted to rise considerably in the near future; however, these countries have a series of problems in accounting and reporting these gases. Some of these problems are related to the status quo of waste management in the developing world and some to the lack of a coherent framework for accounting and reporting of greenhouse gases from waste at municipal level. This review summarizes and compares GHG emissions from individual waste management processes which make up a municipal waste management system, with an emphasis on developing countries and, in particular, Africa. It should be seen as a first step towards developing a more holistic GHG accounting model for municipalities. The comparison between these emissions from developed and developing countries at process level, reveals that there is agreement on the magnitude of the emissions expected from each process (generation of waste, collection and transport, disposal and recycling). The highest GHG savings are achieved through recycling, and these savings would be even higher in developing countries which rely on coal for energy production (e.g. South Africa, India and China) and where non-motorized collection and transport is used. The highest emissions are due to the methane released by dumpsites and landfills, and these emissions are predicted to increase significantly, unless more of the methane is captured and either flared or used for energy generation. The clean development mechanism (CDM) projects implemented in the developing world have made some progress in this field; however, African countries lag behind.

09 BIOMASS FUELS↗
DOE OSTI2012

Comparing the greenhouse gas emissions from three alternative waste combustion concepts

Highlights: Black-Right-Pointing-Pointer Significant GHG reductions are possible by efficient WtE technologies. Black-Right-Pointing-Pointer CHP and high power-to-heat ratio provide significant GHG savings. Black-Right-Pointing-Pointer N{sub 2}O and coal mine type are important in LCA GHG emissions of FBC co-combustion. Black-Right-Pointing-Pointer Substituting coal and fuel oil by waste is beneficial in electricity and heat production. Black-Right-Pointing-Pointer Substituting natural gas by waste may not be reasonable in CHP generation. - Abstract: Three alternative condensing mode power and combined heat and power (CHP) waste-to-energy concepts were compared in terms of their impacts on the greenhouse gas (GHG) emissions from a heat and power generation system. The concepts included (i) grate, (ii) bubbling fluidised bed (BFB) and (iii) circulating fluidised bed (CFB) combustion of waste. The BFB and CFB take advantage of advanced combustion technology which enabled them to reach electric efficiency up to 35% and 41% in condensing mode, respectively, whereas 28% (based on the lower heating value) was applied for the grate fired unit. A simple energy system model was applied in calculating the GHG emissions in different scenarios where coal or natural gas was substituted in power generation and mix of fuel oil and natural gas in heat generation by waste combustion. Landfilling and waste transportation were not considered in the model. GHG emissions were reduced significantly in all of the considered scenarios where the waste combustion concepts substituted coal based power generation. With the exception of condensing mode grate incinerator the different waste combustion scenarios resulted approximately in 1 Mton of fossil CO{sub 2}-eq. emission reduction per 1 Mton of municipal solid waste (MSW) incinerated. When natural gas based power generation was substituted by electricity from the waste combustion significant GHG emission reductions were not achieved.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗