Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CAPTURE EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Effect of Viscosity of a Deep Eutectic Solvent on CO 2 Capture Performance in an Energy-Efficient Membrane Contactor-Based Process

Greenhouse gas contributions to climate change have driven intense interest in the separation of CO 2 from wet flue gas streams. Deep eutectic solvents (DESs) are an emerging class of highly selective CO 2 absorbents. A prototypical DES, reline, is a mixture of choline chloride and urea. Reline is a thermally stable, nontoxic, and biodegradable solvent with negligible volatility and is inexpensive. We demonstrate a scalable and energy-efficient hollow fiber membrane contactor (HFMC)-based process using a green solvent for CO 2 capture. This process uses reline in HFMC to provide close interfacial interactions and contact between DES and CO 2 . This approach overcomes the disadvantages associated with direct absorption in DES and could potentially be applied to a variety of solvent-based CO 2 capture methods. Commercial, low-cost polymer hollow fiber membranes were evaluated for the capture of CO 2 with reline. From a mixed gas containing N 2 and CO 2 , the DES-based HFMC separated CO 2 with a purity of 97 mol %. The effect of the viscosity of reline on the CO 2 capture performance was investigated by adding water to the reline. The addition of water to reline significantly reduced its viscosity, which led to a permeate flux of 170 mmol/(m 2 ·h) at 35 °C, 4 bar, and 60 wt % water in solvent, which was approximately 8 times higher than that of the pure reline in the membrane contactor system. In situ Fourier transform infrared spectroscopy and nuclear magnetic resonance (NMR) revealed that reline absorbs CO 2 by physical absorption without forming new chemical compounds and that CO 2 separation by reline occurs via the pressure swing mechanism. This research provides fundamental insights about green physical solvent-based separation processes and a pathway toward industrial deployment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evaluation of common trap types for capturing wild pigs

Abstract Wild pigs ( Sus scrofa ) are one of the most ecologically harmful invasive vertebrates globally. Due to their negative impacts, wild pig populations are managed via trapping, yet studies investigating various trap designs have been limited in duration, location, and number of trappers. Using data from professional trappers across the southeastern U.S., we evaluated the performance of 3 wild pig trap types (corral, drop, passive net), and the effect of forage season (barren, green‐up, masting) on trapping success. Specifically, we compared trap effectiveness (estimated proportion of targeted wild pigs caught per capture event), trap night effort (number of days to first catch), and the amount of bait and time used per individual take over the lifetime of each trap location across the 3 trap types and forage seasons. Across >850 capture events by 31 trappers, all 3 trap types evaluated were effective at capturing entire social groups of wild pigs. Few differences were observed among trap types, although drop traps in masting season captured a greater estimated proportion of wild pigs per capture event compared to other trap type‐season combinations. Our data also revealed that passive net traps required slightly more bait/wild pig captured than drop traps but there was no difference in the time/wild pig captured among traps. Our findings demonstrate that when operated by wildlife professionals, multiple designs of wild pig traps can be effective at removing targeted groups of wild pigs. Further, our results offer insights regarding the performance of wild pig trap types across seasons that can be used to inform wild pig trapping programs.

Taylor, Charles R. [Warnell School of Forestry and↗

Summary of the Tandem Cylinder Solutions from the Benchmark Problems for Airframe Noise Computations-I Workshop

Fifteen submissions in the tandem cylinders category of the First Workshop on Benchmark problems for Airframe Noise Computations are summarized. Although the geometry is relatively simple, the problem involves complex physics. Researchers employed various block-structured, overset, unstructured and embedded Cartesian grid techniques and considerable computational resources to simulate the flow. The solutions are compared against each other and experimental data from 2 facilities. Overall, the simulations captured the gross features of the flow, but resolving all the details which would be necessary to compute the noise remains challenging. In particular, how to best simulate the effects of the experimental transition strip, and the associated high Reynolds number effects, was unclear. Furthermore, capturing the spanwise variation proved difficult.

Lockard, David P.↗

Measurement of the absolute neutron beam polarization from a supermirror polarizer and the absolute efficiency of a neutron spin rotator for the NPDGamma experiment using a polarized 3 He neutron spin-filter

Accurately measuring the neutron beam polarization of a high flux, large area neutron beam is necessary for many neutron physics experiments. The Fundamental Neutron Physics Beamline (FnPB) at the Spallation Neutron Source (SNS) is a pulsed neutron beam that was polarized with a supermirror polarizer for the NPDGamma experiment. The polarized neutron beam had a flux of ~10 9 neutrons per second per cm 2 and a cross sectional area of 10 x 12 cm 2 . The polarization of this neutron beam and the efficiency of a RF neutron spin rotator installed downstream on this beam were measured by neutron transmission through a polarized 3 He neutron spin-filter. The pulsed nature of the SNS enabled us to employ an absolute measurement technique for both quantities which does not depend on accurate knowledge of the phase space of the neutron beam or the 3 He polarization in the spin filter and is therefore of interest for any experiments on slow neutron beams from pulsed neutron sources which require knowledge of the absolute value of the neutron polarization. The polarization and spin-reversal efficiency measured were done for the NPDGamma experiment, which measures the parity violating γ-ray angular distribution asymmetry with respect to the neutron spin direction in the capture of polarized neutrons on protons. Finally, the experimental technique, results, systematic effects, and applications to neutron capture targets are discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Revisiting the connection of baryon number, lepton number, and operator dimension

The effects of heavy new particles beyond the Standard Model can be conveniently captured through higher-dimensional effective operators. As noted long ago by Weinberg, the amount of baryon and lepton number an operator can carry is intricately connected to its mass dimension. We derive an improved inequality for this connection and compare it to explicit operator constructions up to mass dimension 25. For the effective field theory of Standard Model plus right-handed neutrinos, our relationship is even an equality up to high mass dimension.

Baryon number violation↗

Neutron Capture Energies for Flux Normalization and Approximate Model for Gamma-Smeared Power

The Consortium for Advanced Simulation of Light Water Reactors (CASL) Virtual Environment for Reactor Applications (VERA) neutronics simulator MPACT has used a single recoverable fission energy for each fissionable nuclide assuming that all recoverable energies come only from fission reaction, for which capture energy is merged with fission energy. This approach includes approximations and requires improvement by separating capture energy from the merged effective recoverable energy. This report documents the procedure to generate recoverable neutron capture energies and the development of a program called CapKappa to generate capture energies. Recoverable neutron capture energies have been generated by using CapKappa with the evaluated nuclear data file (ENDF)/B-7.0 and 7.1 cross section and decay libraries. The new capture kappas were compared to the current SCALE-6.2 and the CASMO-5 capture kappas. These new capture kappas have been incorporated into the Simplified AMPX 51- and 252-group libraries, and they can be used for the AMPX multigroup (MG) libraries and the SCALE code package. The CASL VERA neutronics simulator MPACT does not include a gamma transport capability, which limits it to explicitly estimating local energy deposition from fission, neutron, and gamma slowing down and capture. Since the mean free path of gamma rays is typically much longer than that for the neutron, and the total gamma energy is about 10% to the total energy, the gamma-smeared power distribution is different from the fission power distribution. Explicit local energy deposition through neutron and gamma transport calculation is significantly important in multi-physics whole core simulation with thermal-hydraulic feedback. Therefore, the gamma transport capability should be incorporated into the CASL neutronics simulator MPACT. However, this task will be timeconsuming in developing the neutron induced gamma production and gamma cross section libraries. This study is to investigate an approximate model to estimate gammasmeared power distribution without performing any gamma transport calculation. A simple approximate gamma smearing model has been investigated based on the facts that pinwise gamma energy depositions are almost flat over a fuel assembly, and assembly-wise gamma energy deposition is proportional to kappa-fission energy deposition. The approximate gamma smearing model works well for single assembly cases, and can partly improve the gamma smeared power distribution for the whole core model. Although the power distributions can be improved by the approximate gamma smearing model, still there is an issue to explicitly obtain local energy deposition. A new simple approach or gamma transport/diffusion capability may need to be incorporated into MPACT to estimate local energy deposition for more robust multi-physics simulation.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Simulation Strategies for Shock-Turbulence Interactions

The computational challenge of predicting shock-turbulence interactions stems from the fundamentally different physics at play. Shock waves are microscopically thin regions wherein flow properties change rapidly over a distance roughly equal to the molecular mean free path; hence, they are essentially strong discontinuities in the flow field. Turbulence, on the other hand, is a chaotic phenomenon with broadband spatial and temporal scales of motion. Most shock-capturing methods rely on strong numerical dissipation to artificially smooth the discontinuity, such that it can be resolved on the computational grid. Unfortunately, the artificial dissipation necessary for capturing shocks has a deleterious effect on turbulence. An additional problem is the fact that shock-capturing schemes are typically based on one-dimensional Riemann solutions that are not strictly valid in multiple dimensions. This can lead to anisotropy errors and grid-seeded perturbations. Other complications arising from upwinding, flux limiting, operator splitting etc., can seriously degrade performance and generate significant errors, especially in multiple dimensions. The purpose of this work is to design improved algorithms, capable of capturing both shocks and turbulence, which also scale to tens of thousands of processors. We have evaluated two new hydrodynamic algorithms, in relation to the widely used WENO method, on a suite of test cases. The new methods, referred to as the 'Compact' and 'Hybrid' schemes, show very promising results.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A Physics-Based Data-Driven Approach for Modeling of Environmental Degradation in Elastomers

Abstract Elastomers are now commonly used in a number of industries, including aerospace, structure, transportation, shipbuilding, and automotive, due to their excellent workability, formability, and flexibility. During their activity, elastomers are subjected to harsh environmental conditions, which decreases their resilience. False predictions made early in their lives can have major financial and environmental implications. Elastomers’ performance and properties, such as strength, durability, and density, are influenced by chemical changes in these materials, known as degradation, which occurs over time. This process can alter the morphology of a polymer matrix as well as cause chain scission and cross-linking, resulting in different behaviors than that of the unaged material. To demonstrate the effect of thermaloxidative aging on the mechanical behavior of elastomers, several experimental and theoretical models have been proposed. In view of the large volume of experimental data available on micro-structural evolution in the course of aging, we propose a physics-based data-driven approach to overcome the shortcomings of both phenomenological and micro-mechanical models. This work presents a novel thermodynamically consistent, multiagent machine-learned model for predicting the constitutive behavior of cross-linked elastomers during environmental aging, such as thermo-oxidative and hydrolytic aging for various states of deformation. Single mechanism degradation changes the polymer matrix over time where it is causing chain scission, reduction of cross-links, and morphology change. To capture the idealized Mullins effect and permanent set due to the effect of single aging mechanisms on nonlinear mechanical responses of elastomers, we propose a data-driven model for simulating inelastic elements in a polymer matrix. By using a sequential order reduction, we were able to reduce the 3D stress-strain tensor mapping problem to a small number of super-constrained 1D mapping problems. To systematically classify such mapping problems into a few categories, an assembly of multiple replicated conditional neural network learning agents (L-agents) is used based on our recent work. Each category is represented by a different type of agent. The effect of deformation history, aging time, and aging temperature is captured by this model. The model is validated using a broad collection of data, ranging from our experimental results to data from the literature. In addition, thermodynamic consistency and frame independence are investigated. The most significant achievements of this model are its precision, simplicity, and prediction of inelasticity under various states of deformation. The model’s accuracy and simplicity make it a good option for commercial and industrial applications. Conveniently, due to the model modular nature, it can be expanded in the future to include viscoelasticity and non-isotropic formation for better precision.

Ghaderi, Aref↗

Quantifying the Effects of Snowpack on Soil Thermal and Carbon Dynamics of the Arctic Terrestrial Ecosystems

Snow insulation effects modify soil and carbon dynamics in northern middle to high latitudes (45°–90°N). This study incorporates these effects by introducing a snow model into an existing soil thermal model in a biogeochemistry modeling framework, the Terrestrial Ecosystem Model. The coupled model is used to quantify snow insulation effects on carbon and soil thermal dynamics in 45°–90°N region for the historical period (2003–2010) and the future period (2017–2099) under two climate scenarios. The revised model captures the snow insulation effects and improves the estimates of soil thermal dynamics and the land freeze-thaw as well as terrestrial ecosystem carbon dynamics. Historical mean cold-season soil temperature at 5 cm depth driven with satellite-based snow data is 6.4°C warmer in comparison with the original model simulation. Frozen area in late spring is estimated to shrink mainly over eastern Siberia, in central to eastern Europe, and along southern Canada in November. During each nongrowing season in the historical period, 0.41 Pg more soil C is released due to warmer soil temperature estimated using the new model. During 2003–2010, the revised model estimates that the region accumulated 0.86 Pg less C due to weaker gross primary production, leading to a regional C loss at 0.19 PgC/year. The revised model projects that the region will lose 38–51% permafrost area by 2100 and continue to be a C source under the low-emission scenario (Representative Concentration Pathway 2.6) but to be gradually transitioning into a weak sink in the latter half of the 21st century under the high-emission scenario (Representative Concentration Pathway 8.5).

54 ENVIRONMENTAL SCIENCES↗

Target effects on the linear polarization of photons emitted in radiative electron capture by heavy ions

Radiative electron capture by highly-charged, heavy ions is re-investigated within the framework of the first-order perturbation theory and impulse approximation. In this study, we focus especially on the polarization properties of the emitted radiation and on the effects which arise from the binding of the target electrons. In order to explore such effects, detailed calculations have been carried out for relativistic collisions of bare uranium U{sup 92+} projectiles with neutral low- and medium-Z atoms. From these calculations, it is shown that the linear polarization of K-REC (L-REC) photons [photons originating from radiative electron capture into the K shell (L shell)] can be very sensitive to the momentum distribution of bound electrons if the capture occurs selective for the different shells of the target. The most pronounced effect can be observed for collision studies as performed with well-defined impact parameters or upon suppression of the capture from the outer target shells.

74 ATOMIC AND MOLECULAR PHYSICS↗

Dissipative magnetohydrodynamics for nonresistive relativistic plasmas: An implicit second-order flux-conservative formulation with stiff relaxation

Based on a 14-moment closure for nonresistive (general-) relativistic viscous plasmas, here we describe a new numerical scheme that is able to handle all first-order dissipative effects (heat conduction, bulk and shear viscosities), as well the anisotropies induced by the presence of magnetic fields. The latter is parametrized in terms of a thermal gyrofrequency or, equivalently, a thermal Larmor radius and allows to correctly capture the thermal Hall effect. By solving an extended Israel-Stewart-like system for the dissipative quantities that enforces algebraic constraints via stiff-relaxation, we are able to cast all first-order dissipative terms in flux-divergence form. This allows us to apply traditional high-resolution shock capturing methods to the equations, making the system suitable for the numerical study of highly turbulent flows. We present several numerical tests to assess the robustness of our numerical scheme in flat spacetime. The 14-moment closure can seamlessly interpolate between the highly collisional limit found in neutron star mergers, and the highly anisotropic limit of relativistic Braginskii magnetohydrodynamics appropriate for weakly collisional plasmas in black-hole accretion problems. We believe that this new formulation and numerical scheme will be useful for a broad class of relativistic magnetized flows.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

BLACK HOLE-NEUTRON STAR MERGERS WITH A HOT NUCLEAR EQUATION OF STATE: OUTFLOW AND NEUTRINO-COOLED DISK FOR A LOW-MASS, HIGH-SPIN CASE

Neutrino emission significantly affects the evolution of the accretion tori formed in black hole-neutron star mergers. It removes energy from the disk, alters its composition, and provides a potential power source for a gamma-ray burst. To study these effects, simulations in general relativity with a hot microphysical equation of state (EOS) and neutrino feedback are needed. We present the first such simulation, using a neutrino leakage scheme for cooling to capture the most essential effects and considering a moderate mass (1.4 M{sub ☉} neutron star, 5.6 M{sub ☉} black hole), high-spin (black hole J/M {sup 2} = 0.9) system with the K{sub 0} = 220 MeV Lattimer-Swesty EOS. We find that about 0.08 M{sub ☉} of nuclear matter is ejected from the system, while another 0.3 M{sub ☉} forms a hot, compact accretion disk. The primary effects of the escaping neutrinos are (1) to make the disk much denser and more compact, (2) to cause the average electron fraction Y{sub e} of the disk to rise to about 0.2 and then gradually decrease again, and (3) to gradually cool the disk. The disk is initially hot (T ∼ 6 MeV) and luminous in neutrinos (L{sub ν} ∼ 10{sup 54} erg s{sup –1}), but the neutrino luminosity decreases by an order of magnitude over 50 ms of post-merger evolution.

79 ASTRONOMY AND ASTROPHYSICS↗

Regional Multi-station Discriminants: Magnitude, Distance and Amplitude Corrections and Sources of Error

Magnitude, distance and amplitude corrections (MDAC) made to observed regional amplitudes are necessary so that what remains in the corrected amplitude is mostly information about the seismic source-type. Corrected amplitudes can be used in ratios to discriminate between earthquakes and explosions. However, there remain source effects such as those due to depth, focal mechanism, local material property and apparent stress variability that cannot easily be determined and applied as amplitude corrections. We develop a mathematical model to capture these near source effects as random (unknown) giving an error partition of three sources: model inadequacy, station noise and amplitude correlations. This mathematical model is the basis for a general multi-station regional discriminant formulation. The standard error of the discriminant includes these three sources of error in its formulation. The developed methods are demonstrated with a collection of Nevada Test Site (NTS) events observed at regional stations. Importantly, the proposed formulation includes all corrected amplitude information through the construction of multi-station discriminants. In contrast, previous studies have only computed discriminants from single stations having both P and S amplitudes. The proposed multi-station approach has similarities to the well established m{sub b} versus M{sub s} discriminant and represents a new paradigm for the regional discrimination problem.

58 GEOSCIENCES↗

DISCRIMINATION CALIBRATION ANALYSIS METHODS FOR REGIONAL STATIONS

For event discrimination, operational implementation of a regional seismic station requires three sequential calibration analyses. 1) Magnitude, distance and amplitude corrections (MDAC) made to observed regional amplitudes are necessary so that what remains in the corrected amplitude is mostly information about the seismic source-type. Corrected amplitudes can be used in ratios to discriminate between earthquakes and explosions. Calibration of MDAC can be accomplished with empirical Bayes estimation, which naturally provides metrics to determine when adequate calibration data have been acquired, and provides statistical assurance that the errors associated with MDAC calibration are negligible in future operational discrimination analysis. 2) MDAC corrected amplitudes can then be used in ratios to discriminate between earthquakes and explosions. However, there remain source effects such as those due to depth, focal mechanism, local material property and apparent stress variability that cannot easily be determined and applied as amplitude corrections. We have developed a mathematical model to capture these near source effects as random (unknown) giving an error partition of three sources: model inadequacy, station noise and amplitude correlation. This mathematical model is the basis for a general multi-station regional discriminant. Calibration analysis for the standard error of the discriminant includes the calculation of the variances of model inadequacy and station noise, and amplitude correlation. 3) Likelihood-based seismic event identification analysis with MDAC discriminants requires estimated source population means and covariance matrices for the discriminants from each of the possible source types (e.g., deep earthquake, shallow earthquake, and explosion). Anderson et al. (2007) note that source population covariance matrices and the pooled covariance matrix are best estimated element-wise to fully utilize available calibration events. We propose an algorithm that may be used to mildly adjust an element-wise covariance matrix to ensure positive definiteness and non-singular behavior. The algorithm uses the Frobenius norm as the calibration metric because it minimally adjusts the variance terms of an element-wise covariance relative to the off-diagonal covariance terms to achieve a stable, positive semi-definite covariance matrix.

Anderson, Dale N.↗

Polymer etching by atmospheric-pressure plasma jet and surface micro-discharge sources: Activation energy analysis and etching directionality

Treatments of polymer films using either a MHz atmospheric pressure plasma jet (APPJ) or an atmospheric pressure surface micro-discharge (SMD) plasma are investigated. While the typical approach to determine relevant reactive species is to correlate surface effects with gas phase species measurement, this does not capture potential synergistic or other complex effects that may be occurring. Activation energy and directionality of the etching process can characterize what is occurring at the surface for these processes in more detail. The APPJ source shows an apparent activation energy of ~0.18 eV at 8 mm distance and up to ~0.34 eV at 16mmdistance for a temperature range of 20–80 °C tested with thin polymer films. The APPJ source shows directional etching at 8 mm distance with less anisotropy the more distance is increased. The SMD source has an apparent activation energy of ~0.8–0.9 eV at a distance of 3 mm. The SMD also only shows isotropic etching behavior. However the SMD surface chemistry changes significantly to less oxidation with increased temperature while the APPJ source induced modifications remain very similar with temperature change. The lower apparent activation energy of the APPJ induced etching reactions as compared with low pressure work (0.5 eV) and observation of line-of-sight contribution to etching suggests the involvement of a directional species at closer distances facilitating the etching which falls off with increasing distance. The high activation energy of the SMD suggests that species with less capability for etching is responsible compared to the APPJ and low pressure plasma. In conclusion, the high surface oxidation from low temperature SMD treatments shows that the surface is being oxidized but not sufficiently to reach the desorption step of the etching process.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Alkaline zirconates as effective materials for hydrogen production through consecutive carbon dioxide capture and conversion in methane dry reforming

In this work, H 2 production was evaluated using different carbonation conditions and two alkaline zirconates. For this purpose, Li 2 ZrO 3 and Na 2 ZrO 3 were synthesized, characterized and tested on a consecutive process composed of initial CO 2 capture, followed by methane dry reforming (MDR). Thermogravimetric results showed that under the four gas mixtures tested (diluted and saturated CO 2 , CO and CO-O 2 ), both ceramics are able to chemisorb CO 2 , with Na2ZrO3 having the highest capture with saturated CO 2 . In catalytic tests, ceramics carbonated with saturated CO 2 or CO-O 2 gas flows were able to act as sorbents and catalysts, producing H 2 at T > 750 °C through the partial oxidation of methane. This reaction was produced because CO2 desorption did not occur, thus avoiding the MDR process. On the other hand, carbonated ceramics under a CO-O2 gas mixture presented an outstanding catalytic performance. Between 450 and 750 °C, H 2 was formed through the MDR process promoted by CO 2 desorption from both ceramics. This result is in line with CO 2 desorption results, where a weaker CO 2 –solid interaction was observed in comparison with saturated CO 2 2. Afterward, both ceramics presented a similar catalytic behavior, good regeneration and cyclability after the double process proposed (CO 2 capture-MDR reaction). Lithium zirconate also presented high thermal stability during cycle tests; meanwhile, sodium zirconate showed an important H 2 production increase as a function of cycles. Finally, both materials are feasible options for producing a clean energy source in a moderate temperature range through the catalytic conversion of two greenhouse gases (CO 2 and CH 4 ).

03 NATURAL GAS↗

Polarizability Plays a Decisive Role in Modulating Association between Molecular Cations and Anions

Electrostatic interactions involving proteins depend on not only the ionic charges involved but also their chemical identities. Here we examine the origins of incompletely understood differences in the strength of association of different pairs of monovalent molecular ions that are relevant to protein–protein and protein–ligand interactions. Cationic analogues of the basic amino acid side chains are simulated, along with oxyanionic analogues of cation-exchange ligands and acidic amino acids. Experimentally observed association trends with respect to the cations, but not anions, are captured by a nonpolarizable model. An effective continuum correction to account for electronic polarizability can capture both trends better but at the expense of fidelity to the underlying free energy landscape for ion-pair association. Finally, a polarizable model proves decisive in capturing experimentally suggested trends with respect to both cations and anions; critically, the free energy landscape for ion-pair association is itself altered, thus altering configurational sampling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗