Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BACKSCATTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

The 27-28 October 1986 FIRE IFO cirrus case study - Cloud optical properties determined by High Spectral Resolution Lidar

The High Spectral Resolution Lidar (HSRL) was operated from a roof-top site in Madison, Wisconsin. The transmitter configuration used to acquire the case study data produces about 50 mW of ouput power and achieved eye-safe, direct optical depth, and backscatter cross section measurements with 10 min averaging times. A new continuously pumped, injection seeded, frequency doubled Nd:YAG laser transmitter reduces time-averaging constraints by a factor of about 10, while improving the aerosol-molecular signal separation capabilities and wavelength stability of the instrument. The cirrus cloud backscatter-phase functions have been determined for the October 27-28, 1986 segment of the HSRL FIRE dataset. Features exhibiting backscatter cross sections ranging over four orders of magnitude have been observed within this 33 h period. During this period, cirrus clouds were observed with optical thickness ranging from 0.01 to 1.4. The altitude relationship between cloud top and bottom boundaries and the optical center of the cloud is influenced by the type of formation observed.

Grund, C. J.↗
NASA NTRS1991

A comparison of measured and calculated optical properties of atmospheric aerosols at infrared wavelengths

Measurements of 10.6-micron lidar backscatter were compared with calculated backscatter based on nearly simultaneous observations of stratospheric and tropospheric aerosol size distributions. It was found that there is better agreement in the troposphere, even though the uncertainties of the calculation are greater for this region due to the variables in both the spatial concentration and the physical makeup of the aerosol. A second comparison study was made to test the consistency of the mean tropospheric extinction values at 1.02 micron (as reported by the SAGE satellite) with the values calculated from an ensemble of 400 measured size distributions thought to be representative of midcontinental tropospheric aerosol. The two methods produce consistent results within the expected degree of uncertainty. The ensemble of 400 'proven' size distributions is then used to calculate a statistical relationship between the 1.02-micron extinction and the 10.6-micron backscatter.

Rosen, James M.↗
NASA NTRS1990

Ultrasonic nondestructive evaluation of graphite epoxy composite laminates

Quantitative ultrasonic techniques are summarized with applications to the measurement of frequency-dependent attenuation and backscatter and to the NDE of composite laminates. Results are listed for the ultrasonic NDE of graphite-epoxy composite laminates including impact and fatigue damage as well as porosity. The methods reviewed include transmission measurements of attenuation, reconstructive tomography based on attenuation, estimating attenuation from backscattered ultrasound, and backscatter approaches. Phase-sensitive and -insensitive detection techniques are mentioned such as phase cancellation at piezoelectric receiving transducers and acoustoelectric effects. The techniques permit the NDE of the parameters listed in inhomogeneous media and provide both images from the transmission mode and in the reflection mode.

Miller, James G.↗
NASA NTRS1992

Scanning-Pencil-Beam Radar Scatterometer

SCANSCAT conceptual scanning radar scatterometer placed in nearly polar orbit around Earth at altitude of 705 km aboard Spacecraft B of NASA's Earth Observing System. Measures radar backscattering from surface of ocean. Data processed on ground into normalized radar-backscattering cross sections, then processed into velocities of winds near surface of ocean by use of empirical mathematical model of relationship between normalized backscattering cross section, wind vector at scanned spot, and angle of incidence and azimuth angle of radar beam. Accuracy and coverage exceeds those of fan-beam scatterometer. Modified versions of scanning plan useful in laser inspection of surface finishes on machined parts.

Long, David G.↗
NASA NTRS1991

Use of radar to assess aeolian processes

The interaction between wind and desert surfaces has important implications for sediment transport on Earth, Mars, and Venus, and for understanding the relationship between radar backscatter and aerodynamic roughness. Here, researchers report results from measurements of atmospheric boundary layer profiles, assessment of radar backscatter at P, L, and C wavelengths, and surface roughness in Death Valley, the Mojave Desert, and Lunar Lake, NV, and discuss the implications for aeolian process. The sites include playas, gravel and sand regs, alluvial fans, and lava flows. Boundary layer wind profiles were measured using anemometers at heights of 0.75, 1.25, 2.07, 3.44, 5.72, and 9.5 m; temperature sensors at heights of 1.3 and 9.6 m; and wind vanes at 9.7 and 1.5 m. Microtopographic measurements were made using a template and a laser-photo device to obtain RMS height. This study demonstrates that radar backscatter coefficients obtained from airborne and perhaps orbiting instruments could permit the derivation of aerodynamic roughness values for large areas. Such values, when combined with wind frequency data, could enable assessment of aeolian processes on a regional scale.

Greeley, Ronald↗
NASA NTRS1991

Relating the temporal change observed by AIRSAR to surface and canopy properties of mixed conifer and hardwood forests of northern Michigan

The mixed hardwood and conifer forests of northern Michigan were overflown by a 3-frequency airborne imaging radar in Apr. and Jul. 1990. A set of 10 x 10 km test sites near the University of Michigan Biological Station at Douglas Lake and within the Hiawatha National Forest in the upper peninsula of Michigan contained training stands representing the various forest species typical of forest communities across the ecotone between the coniferous boreal forest and mid-latitude hardwood and coniferous forests. The polarimetric radar data were externally calibrated to allow interdate comparisons. The Apr. flight was prior to bud-break of deciduous species and patchy snowcover was present. The Jul. flights occurred during and 2 days after heavy rain showers, and provide a unique opportunity to examine the differences in radar backscatter attributable to intercepted precipitation. Analyses show that there are significant changes in backscattering between biophysically dissimilar forest stands on any given date and also between dates for a given forest stand. These differences in backscattering can be related to moisture properties of the forest floor and the overlying canopy and also to the quantity and organizational structure of the above-ground biomass.

Dobson, M. Craig↗
NASA NTRS1992

Raman Lidar Measurements of Pinatubo Aerosols over Southeastern Kansas During November-december 1991

The eruptions of the Philippine volcano Pinatubo during June 1991 produced large amounts of stratospheric aerosols that could significantly affect earth's climate as well as trigger stratospheric ozone depletion through heterogeneous chemical reactions. Information regarding the physical and optical properties of these aerosols is required to quantify those effects. By measuring both the elastically backscattered signal and the inelastic signal produced by Raman scattering from nitrogen molecules, Raman lidar can provide some of this information. In this presentation we discuss Raman lidar measurements of the scattering ratio, backscattering, extinction, extinction/backscattering ratio, and optical thickness of the Pinatubo aerosols over southeastern Kansas made on 10 nights during November and December, 1991. The Raman lidar developed at GSFC is a trailer-based system which uses an XeF excimer laser to transmit light at 351 nm. The light backscattered by molecules and aerosols at this wavelength is detected as well as Raman scattered light from water vapor, nitrogen, and oxygen molecules. Since background skylights interfere with the detection of the Raman signals the data discussed in this paper were acquired only at night.

Ferrare, R. A.↗
NASA NTRS1992

Lidar Observations of Stratospheric Clouds After Volcanic Eruption of Pinatubo

A very large increase of backscattered light from the stratospheric aerosol layer was observed by using a ruby laser in Beijing (39 degrees 54 minutes N, 116 degrees 27 minutes E) from the end of July 1991 to March 1992. It was concluded that this increase was almost certainly due to the volcanic eruption of Mt. Pinatubo in the Philippines in June 1991. The measuring instruments used are described. Information is given in graphical form for vertical profiles, fluctuation of the maximum backscattering ratio above 20 km during the nine month period, and the time variation of the integrated backscattering coefficient at a height of 15 to 30 km.

Sun, Jinhui↗
NASA NTRS1992

Doppler lidar wind measurement with the edge technique

The edge technique is a new and powerful method for measuring small frequency shifts. Range resolved lidar measurements of winds can be made with high accuracy and high vertical resolution using the edge technique to measure the Doppler shift of an atmospheric backscattered signal from a pulsed laser. The edge technique can be used at near-infrared or visible wavelengths using well developed solid state lasers and detectors with various edge filters. In the edge technique, the laser frequency is located on the steep slope of the spectral response function of a high resolution optical filter. Due to the steep slope of the edge, very small frequency shifts cause large changes in measured signal. The frequency of the outgoing laser pulse is determined by measuring its location on the edge of the filter. This is accomplished by sending a small portion of the beam to the edge detection setup where the incoming light is split into two channels - an edge filter and an energy monitor channel. The energy monitor signal is used to normalize the edge filter signal for magnitude. The laser return backscattered from the atmosphere is collected by a telescope and directed through the edge detection setup to determine its frequency (location on the edge) in a similar manner for each range element. The Doppler shift, and thus the wind, is determined from a differential measurement of the frequency of the outgoing laser pulse and the frequency of the laser return backscattered from the atmosphere. We have conducted simulations of the performance of an edge lidar system using an injection seeded pulsed Nd:YAG laser at 1.06 microns. The central fringe of a Fabry-Perot etalon is used as a high resolution edge filter to measure the shift of the aerosol return.

Korb, C. Laurence↗
NASA NTRS1992

Lidar multiple scattering: Dependence on atmospheric parameters

Backscatter lidars are very useful tools in gaining information about the atmosphere. Inversion of backscatter signals can be used to retrieve the spatial distribution of clouds and aerosols, e.g., vertical extensions of clouds and aerosol layers, detection of 'subvisible' cirrus, etc., very accurately compared to passive radiometers. To retrieve extinction coefficient profiles, in general, the so-called lidar equation is solved. This equation describes a laser pulse which propagates through an atmosphere with transmission exp(- integral of sigma(z')dz'), which is scattered singly under 180 degrees towards a receiver, and which is attenuated on its way back again by exp(- integral of sigma(z')dz'). For inversion, further information on optical properties of the scatterers are required (extinction to backscatter ratio). However, it is evident that, at least for optically thick clouds and/or large receiver's field-of-views, this approach may be erroneous because of multiply scattered photons. Several studies were performed to simulate multiple scattering in case of collimated beams or pulses including Monte Carlo, transport, and diffusion theory. Unfortunately, most of the approaches require an enormous amount of computer time. Thus, it is meaningful to elaborate approximate methods, and one such method is discussed. Our method is based on Bissonnett (1988). We have improved the numerical simulation of limited field-of-view detectors, and compared the results to Monte Carlo calculations and an exact model of Altmann (1989).

Wiegner, Matthias↗
NASA NTRS1992

The E-region Rocket/Radar Instability Study (ERRRIS) - Scientific objectives and campaign overview

The plasma instabilities in the low-attitude auroral ionosphere and the sources of free energy that drive these waves have been examined in detail in the framework of the ERRRIS project. Independent sets of experiments were carried out on board three NASA sounding rockets which were flown in conjunction with radar backscatter measurements from Esrange, Sweden, in 1988 and 1989. The backscatter measurements were taken by the 50 MHz CUPRI system for determining the launch conditions. The Eiscat incoherent scatter radar was used to take plasma drift, density, and temperature measurements on board two of the flown rockets. STARE observations of 1 m backscatter echoes were also made. The STARE velocity fields were in agreement with the Eiscat and in situ measured electric fields. Both CUPRI and STARE observed a very dynamic and changing auroral ionosphere over Esrange. It is concluded that the ERRRIS experiments provided valuable data on plasma instabilities in the auroral electrojet, including detailed in situ measurements of the two-stream wave spectrum and phase velocities.

Pfaff, R. F.↗
NASA NTRS1990

Scattering from randomly oriented scatterers with strong permittivity fluctuations

Strong permittivity fluctuation theory is used to solve the problem of scattering from a medium composed of completely randomly oriented scatterers under a low frequency limit. Gaussian statistics are not assumed for the renormalized scattering sources. Numerical results on effective permittivity are illustrated for oblate and prolate spheroidal scatterers and compared with the results for spherical scatterers. The results are consistent with discrete scatterer theory. The effective permittivity of a random medium embedded with nonspherical scatterers shows a higher imaginary part than the spherical scatterer case with equal correlation volume. Under the distorted Born approximation, the polarimetric covariance matrix for the backscattered electric field is calculated for half-space randomly oriented scatterers. The nonspherical geometry of the scatterers shows significant effects on the cross-polarized backscattering returns, and the correlation coefficient between HH and VV returns. The polarimetric backscattering coefficients can provide useful information in distinguishing the geometry of scatterers.

Yueh, S. H.↗
NASA NTRS1992

Effects of long-wavelength dissipation on beam-driven Langmuir turbulence

The effects of long-wavelength dissipation on beam-driven Langmuir turbulence are investigated using numerical simulations that include both weak and strong turbulence effects. Strong-turbulence wave collapses occur concurrently with weak-turbulence energy cascades if the long-wavelength damping is sufficiently small relative to the growth rate of the beam-unstable waves. Above a threshold damping level, only the weak-turbulence backscatter cascade is observed, and it becomes increasingly truncated as the damping increases, eventually consisting of only a single backscatter. A simple Lotka-Volterra model gives an excellent description of the periodic evolution observed in the weak-turbulence regime. Suppression of the usual backscatter cascade by long-wavelength damping enables intense beam-aligned density troughs to form, which trap and duct Langmuir waves.

Robinson, P. A.↗
NASA NTRS1992

Lidar conversion parameters derived from SAGE II extinction measurements

SAGE II multiwavelength aerosol extinction measurements are used to estimate mass- and extinction-to-backscatter conversion parameters. The basis of the analysis is the principal component analysis of the SAGE II extinction kernels to estimate both total aerosol mass and aerosol backscatter at a variety of wavelengths. Comparisons of coincident SAGE II extinction profiles with 0.694-micron aerosol backscatter profiles demonstrate the validity of the method.

Thomason, L. W.↗
NASA NTRS1992

Radiative transfer theory for polarimetric remote sensing of pine forest

The radiative transfer theory is applied to interpret polarimetric radar backscatter from pine forest with clustered vegetation structures. To take into account the clustered structures with the radiative transfer theory, the scattering function of each cluster is calculated by incorporating the phase interference of scattered fields from each component. Subsequently, the resulting phase matrix is used in the radiative transfer equations to evaluate the polarimetric backscattering coefficients from random medium layers embedded with vegetation clusters. Upon including the multi-scale structures, namely, trunks, primary and secondary branches, as well as needles, we interpret and simulate the polarimetric radar responses from pine forest for different frequencies and looking angles. The preliminary results are shown to be in good agreement with the measured backscattering coefficients at the Landes maritime pine forest during the MAESTRO-1 experiment.

Hsu, C. C.↗
NASA NTRS1993

Multi-center Airborne Coherent Atmospheric Wind Sensor (MACAWS)

This effort involves development of a calibrated, pulsed coherent CO2 Doppler lidar, followed by a carefully-planned and -executed program of multi-dimensional wind velocity and aerosol backscatter measurements from the NASA DC-8 research aircraft. The lidar, designated as the Multi-center Airborne Coherent Atmospheric Wind Sensor (MACAWS), will be applicable to two research areas. First, MACAWS will enable specialized measurements of atmospheric dynamical processes in the planetary boundary layer and free troposphere in geographic locations and over scales of motion not routinely or easily accessible to conventional sensors. The proposed observations will contribute fundamentally to a greater understanding of the role of the mesoscale, helping to improve predictive capabilities for mesoscale phenomena and to provide insights into improving model parameterizations of sub-grid scale processes within large-scale circulation models. As such, it has the potential to contribute uniquely to major, multi-institutional field programs planned for the mid 1990's. Second, MACAWS measurements can be used to reduce the degree of uncertainty in performance assessments and algorithm development for NASA's prospective Laser Atmospheric Wind Sounder (LAWS), which has no space-based instrument heritage. Ground-based lidar measurements alone are insufficient to address all of the key issues. To minimize costs, MACAWS is being developed cooperatively by the lidar remote sensing groups of the Jet Propulsion Laboratory, NOAA Wave Propagation Laboratory, and MSFC using existing lidar hardware and manpower resources. Several lidar components have already been exercised in previous airborne lidar programs (for example, MSFC Airborne Doppler Lidar System (ADLS) used in 1981,4 Severe Storms Wind Measurement Program; JPL Airborne Backscatter Lidar Experiment (ABLE) used in 1989,90 Global Backscatter Experiment Survey Missions). MSFC has been given responsibility for directing the overall program of instrument development and scientific measurement. The focus of current research and plans for next year are presented.

Rhothermel, Jeffry↗
NASA NTRS1992

Unsupervised segmentation of polarimetric SAR data using the covariance matrix

A method for unsupervised segmentation of polarimetric synthetic aperture radar (SAR) data into classes of homogeneous microwave polarimetric backscatter characteristics is presented. Classes of polarimetric backscatter are selected on the basis of a multidimensional fuzzy clustering of the logarithm of the parameters composing the polarimetric covariance matrix. The clustering procedure uses both polarimetric amplitude and phase information, is adapted to the presence of image speckle, and does not require an arbitrary weighting of the different polarimetric channels; it also provides a partitioning of each data sample used for clustering into multiple clusters. Given the classes of polarimetric backscatter, the entire image is classified using a maximum a posteriori polarimetric classifier. Four-look polarimetric SAR complex data of lava flows and of sea ice acquired by the NASA/JPL airborne polarimetric radar (AIRSAR) are segmented using this technique. The results are discussed and compared with those obtained using supervised techniques.

Rignot, Eric J. M.↗
NASA NTRS1993

On the nature of the polarization opposition effect exhibited by Saturn's rings

The nature of the unusually narrow photometric and polarization opposition effects exhibited by Saturn's A and B rings is examined using a theory and results of laboratory measurements. It is pointed out that the small angular width of both phenomena makes it difficult to explain them on the basis of the commonly used shadowing models. On the other hand, it is known from laboratory experiments and theoretical studies, that a strong and very narrow opposition peak in the reflected intensity can be produced by coherent backscattering of light from powderlike layers of small regolithic grains. Using Ozrin's (1992) rigorous vector theory of coherent backscattering, it is shown that, for subwavelength-sized regolithic particles, the photometric opposition effect is accompanied by a polarization opposition effect of the same angular width. This suggests that the polarization opposition effect of the Saturn's ring has the same origin as the photometric opposition effect and is due to coherent backscattering of light from the regolithic layer composed of the submicrometer-sized ice grains.

Mishchenko, Michael I.↗