Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Anode material”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Enhanced hole injection in organic light-emitting devices by using Fe{sub 3}O{sub 4} as an anodic buffer layer

Hole injection improvement in organic light-emitting devices with Fe{sub 3}O{sub 4} as a buffer layer on indium tin oxide (ITO) has been demonstrated. The luminance and the current density are significantly enhanced by using the Fe{sub 3}O{sub 4}/ITO anode, as well as the turn-on voltage is reduced by 1.5 V compared to the devices without the buffer. Results of atom force microscopy, x ray, and UV photoelectron spectroscopy studies reveal that the enhanced hole injection is attributed to the modification of the ITO surface and the reduced hole-injection barrier by the insertion of the Fe{sub 3}O{sub 4} thin film between the ITO and hole-transporting layer.

36 MATERIALS SCIENCE↗

Spray coated indium-tin-oxide-free organic photodiodes with PEDOT:PSS anodes

In this paper we report on Indium Tin Oxide (ITO)-free spray coated organic photodiodes with an active layer consisting of a poly(3-hexylthiophen) (P3HT) and [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) blend and patterned poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) electrodes. External quantum efficiency and current voltage characteristics under illuminated and dark conditions as well as cut-off frequencies for devices with varying active and hole conducting layer thicknesses were measured in order to characterize the fabricated devices. 60% quantum efficiency as well as nearly four orders of magnitude on-off ratios have been achieved. Those values are comparable with standard ITO devices.

36 MATERIALS SCIENCE↗

Electrochemical Dissolution of Tungsten Carbide in NaCl-KCl-Na{sub 2}WO{sub 4} Molten Salt

Tungsten carbide was utilized as anode to extract tungsten in a NaCl-KCl-Na{sub 2}WO{sub 4} molten salt, and the electrochemical dissolution was investigated. Although the molten salt electrochemical method is a short process method of tungsten extraction from tungsten carbide in one step, the dissolution efficiency and current efficiency are quite low. In order to improve the dissolution rate and current efficiency, the sodium tungstate was added as the active substance. The dissolution rate, the anode current efficiency, and the cathode current efficiency were calculated with different contents of sodium tungstate addition. The anodes prior to and following the reaction, as well as the product, were analyzed through X-ray diffraction, scanning electron microscopy, and energy dispersive spectrometry. The results demonstrated that the sodium tungstate could improve the dissolution rate and the current efficiency, due to the addition of sodium tungstate decreasing the charge transfer resistance in the electrolysis system. Due to the fact that the addition of sodium tungstate could remove the carbon during electrolysis, pure tungsten powders with 100 nm diameter were obtained when the content of sodium tungstate was 1.0 pct.

36 MATERIALS SCIENCE↗

Electrochemical Deoxidation of Titanium in Molten MgCl{sub 2}–YCl{sub 3}

A new electrochemical deoxidation process for Ti, where a mixture of magnesium chloride and yttrium chloride (MgCl{sub 2}–YCl{sub 3}) is used as flux, was developed. In the new process, Ti and carbon were used as the cathode and anode, respectively. By elucidating the system using an E-pO{sup 2−} diagram and the experimental results, the reaction mechanism was proposed. Mg is deposited on the Ti cathode and reduces the oxygen in Ti to oxide ions (O{sup 2−}). The activity of the generated O{sup 2−}, a{sub O{sup 2}{sup −}}, in the system is effectively kept at a low level by the formation of yttrium oxychloride, and is further decreased by the electrochemical oxidation reaction on the anode. The process effectively deoxidizes Ti to the level of 100 mass ppm of oxygen concentration at 1200 K. In addition, the oxygen concentration in the Ti sample was maintained at the level of 500 mass ppm O even with the addition of O{sup 2−} sources. Furthermore, a new concept of the industrial Ti-recycling process based on this new deoxidation process was depicted. The obtained results indicate that this new deoxidation technique can be applied in the recycling process of Ti scrap containing a large amount of oxygen.

36 MATERIALS SCIENCE↗

Magnetohydrodynamic Control of Interfacial Degradation in Lithium-Ion Batteries for Fast Charging Applications

Interfacial anodic degradation in graphitic materials under fast charging conditions causes severe performance loss and safety hazard in lithium ion batteries. We present a novel method for minimizing the growth of these aging mechanism by application of an external magnetic field. Under magnetic field, paramagnetic lithium ions experience a magnetohydrodynamic force, which rotates the perpendicularly diffusing species and homogenizes the ionic transport. This phenomenon minimizes the overpotential hotspots at the anode/separator interface, consequently reducing SEI growth, lithium plating, and interfacial fracture. In situ electrochemical measurements indicate an improvement in capacity for lithium cobalt oxide/graphite pouch cell (20 mAh) charged from 1–5 C under an applied field of 1.8 kG, with a maximum capacity gain of 22% at 5C. Post-mortem FE-SEM and EDS mapping shows that samples charged with magnetic field have a reduced lithium deposition at 3C and a complete suppression of interfacial fracture at 5C. At 5C, a 24% reduction in the lithium content is observed by performing XPS on the anodic interfacial film. Finally, fast charging performance under variable magnetic field strengths indicate a saturation behavior in capacity at high fields (>2 kG), thereby limiting the field and consequent energy requirements to obtain maximum capacity gain under extreme conditions.

electromagnetism↗

Facile synthesis of 3D foam-like CoNiO{sub 2} for high-performance sodium ion batteries

Graphical abstract: 3D foam-like CoNiO{sub 2} on Cu foil was synthesized by a low-temperature hydrothermal method with subsequent annealing treatment. In the following figure, the left is the schematic illustration of sodium ion and electron transportation of the CoNiO{sub 2} film, and the right is the rate performance comparison of the CoNiO{sub 2} film and scraped CoNiO{sub 2} powder. - Highlights: • CoNiO{sub 2} film is designed as the anode for sodium ion batteries. • Unique 3D foam-like structure is synthesized by a hydrothermal method. • The binder-free CoNiO{sub 2} electrode exhibits excellent sodium storage performances. - Abstract: 3D foam-like CoNiO{sub 2} on Cu foil was synthesized by a low-temperature hydrothermal method with subsequent annealing treatment. The structure and composition of the 3D foam-like CoNiO{sub 2} have been analyzed by field-emission scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). When employed as anode electrode for sodium ion batteries, the as-prepared CoNiO{sub 2} film electrode exhibited a high reversible capacity of 323.7 mAh g{sup −1} after 100 cycles at 0.1 A g{sup −1}. Moreover, the CoNiO{sub 2} film electrode delivered an excellent rate capability of 210.3 mAh g{sup −1} at 1.6 A g{sup −1}. It is believed that the remarkable electrochemical performance of the film electrode is attributed to the 3D foam-like structure and binder-free feature, which effectively improve the ionic and electron conductivity of the electrode.

36 MATERIALS SCIENCE↗

Carbon Nanotubes: Applications to Energy Storage Devices

Carbon nanotubes (CNTs) are an extraordinary discovery in the area of science and technology. Engineering them properly holds the promise of opening new avenues for future development of many other materials for diverse applications. Carbon nanotubes have open structure and enriched chirality, which enable improvements the properties and performances of other materials when CNTs are incorporated in them. Energy storage systems have been using carbon nanotubes either as an additive to improve electronic conductivity of cathode materials or as an active anode component depending upon structural and morphological specifications. Furthermore, they have also been used directly as the electrode material in supercapacitors and fuel cells. Therefore, CNTs demand a huge importance due to their underlying properties and prospective applications in the energy storage research fields. There are different kinds of carbon nanotubes which have been successfully used in batteries, supercapacitors, fuel cells and other energy storage systems. This chapter focuses on the role of CNTs in the different energy storage and conversion systems and impact of their structure and morphology on the electrochemical performances and storage mechanisms.

Amin, Ruhul↗

Electrochemical deposition of amorphous aluminum oxides on lead pipes to prevent lead leaching into the drinking water

Over 5000 public drinking water systems in the US are out of compliance with the Lead and Copper Rule. Lead leaching from lead pipes is limited by the solubility of a naturally occurring scale. Changes in water quality may cause this scale to become more soluble, releasing lead into the drinking water. We propose a novel electrochemical method to prevent lead leaching from lead pipes. In this method, an aluminum wire and an alkaline phosphate electrolyte are inserted into the pipes. The pipes are then anodized for 2 h by using an external power supply, resulting in the electrodeposition of an insoluble aluminum oxide layer on top of the preexisting scale. This technology was tested on lead pipes from the EBMUD water distribution systems located in Berkeley, CA, using recirculating synthetic and actual tap water for 120 days. The untreated pipes leached an average of 23 ppb and 38 ppb of lead respectively, when using free chlorine and monochloramine as disinfection residuals. In contrast, the treated pipes leached 3 ppb and 5 ppb respectively. These results suggest that the proposed treatment has the potential to prevent lead leaching regardless of the disinfection residual and thus should be further explored in a field trial.

36 MATERIALS SCIENCE↗

A stable graphite electrode in superconcentrated LiTFSI-DME/DOL electrolyte and its application in lithium-sulfur full battery

Graphical abstract: In superconcentrated ether-based solutions, the formed SEI film inhibits electrolyte decomposition and graphite exfoliation caused by co-intercalation of solvents. Thus, reversible lithium intercalation and de-intercalation at a graphite electrode has been realized. - Highlights: • Prelithiated graphite anodes are coupled with sulfur composite cathodes to form a Li–S full cell in superconcentrated LiTFSI-DME/DO electrolyte. • The introduced superconcentrated ether-based electrolyte permits reversible lithium intercalation and de-intercalation at a graphite electrode. • The assembled Li–S full battery exhibits better cycle performance and coulombic efficiencies. - Abstract: Herein, prelithiated graphite anodes are coupled with sulfur composite cathodes to form a Li–S full cell in superconcentrated ether electrolyte. This novel system is effective in avoiding sever corrosion of Li-metal anode and significantly improving the safety of present Li–S cell, owing to the replacement of Li-metal anode with graphite. The introduced superconcentrated ether electrolyte has a unique networking structure of Li cations and TFSI anions with Li{sup +}-solvating DME/DOL solvents, which is conducive to form a stable TFSI-derived surface film on the graphite electrode. The stable and dense TFSI-derived film inhibits further electrolyte decomposition and graphite exfoliation caused by co-intercalation of solvents, allowing reversible lithium intercalation and de-intercalation at a graphite electrode. Besides, the severe polysulfides shuttle is also suppressed by the concentrated ether-based solutions. Consequently, the assembled graphite-sulfur full battery retains outstanding capacity of 686 mAh g{sup −1}{sub sulfur} at 0.1C rate after 105 cycles, along with high Coulombic efficiency.

36 MATERIALS SCIENCE↗

High Areal Capacity Si/LiCoO 2 Batteries from Electrospun Composite Fiber Mats

Here, freestanding nanofiber mat Li-ion battery anodes containing Si nanoparticles, carbon black, and poly(acrylic acid) (Si/C/PAA) are prepared using electrospinning. The mats are compacted to a high fiber volume fraction (~0.85), and interfiber contacts are welded by exposing the mat to methanol vapor. A compacted+welded fiber mat anode containing 40 wt % Si exhibits high capacities of 1,484 mA h g -1 (3,500 mA h g$-1\atop{Si}$) at 0.1 C and 489 mAh g -1 at 1 C and good cycling stability (e.g., 73% capacity retention over 50 cycles). Post-mortem analysis of the fiber mats shows that the overall electrode structure is preserved during cycling. Whereas many nanostructured Si anodes are hindered by their low active material loadings and densities, thick, densely packed Si/C/PAA fiber mat anodes reported here have high areal and volumetric capacities (e.g., 4.5 mA h cm -2 and 750 mA h cm -3 , respectively). A full cell containing an electrospun Si/C/PAA anode and electrospun LiCoO 2 -based cathode has a high specific energy density of 270 Wh kg -1 . The excellent performance of the electrospun Si/C/PAA fiber mat anodes is attributed to the: (i) PAA binder which interacts with the SiO x surface of Si nanoparticles and (ii) high material loading, high fiber volume fraction, and welded interfiber contacts of the electrospun mats

25 ENERGY STORAGE↗

Non-descanned multifocal multiphoton microscopy with a multianode photomultiplier tube

Multifocal multiphoton microscopy (MMM) improves imaging speed over a point scanning approach by parallelizing the excitation process. Early versions of MMM relied on imaging detectors to record emission signals from multiple foci simultaneously. For many turbid biological specimens, the scattering of emission photons results in blurred images and degrades the signal-to-noise ratio (SNR). We have recently demonstrated that a multianode photomultiplier tube (MAPMT) placed in a descanned configuration can effectively collect scattered emission photons from each focus into their corresponding anodes significantly improving image SNR for highly scattering specimens. Unfortunately, a descanned MMM has a longer detection path resulting in substantial emission photon loss. Optical design constraints in a descanned geometry further results in significant optical aberrations especially for large field-of-view (FOV), high NA objectives. Here, we introduce a non-descanned MMM based on MAPMT that substantially overcomes most of these drawbacks. We show that we improve signal efficiency up to fourfold with limited image SNR degradation due to scattered emission photons. The excitation foci can also be spaced wider to cover the full FOV of the objective with minimal aberrations. The performance of this system is demonstrated by imaging interneuron morphological structures deep in the brains of living mice.

36 MATERIALS SCIENCE↗

Wire array Z-pinch length variations for K-shell x-ray generation on Z.

Large diameter (50-70 mm) wire array z pinches are fielded on the refurbished Z machine to generate 1-10 keV K-shell x-ray radiation. Imploding with velocities approaching 100 cm/{micro}s, these loads create large dL/dt which generates a high voltage, stresses the convolute, and leads to current loss. High velocities are required to reach the few-keV electron temperatures required to strip moderate-atomic-number plasmas to the K shell, thus there is an inherent trade-off between achieving high velocity and stressing the pulsed power driver via the large dL/dt.Here, we present experiments in which the length of stagnated Cu and stainless steel z pinches was varied from 12-24 mm. The motivation in reducing the pinch height is to lower the final inductance and improve coupling to the generator. Shortening a Cu pinch from 20 to 12 mm by angling the anode glide plane reduced the final L and dL/dt, enhancing the feed current by 1.4 MA, nearly doubling the K-shell power per unit length, and increasing the net K-shell yield by 20%. X-ray spectroscopy is employed to assess differences in plasma conditions between the loads. Lengthening the pinch could lead to yield enhancements by increasing the mass participating in the implosion, provided the increased inductance is not overly detrimental to the current coupling. In addition to the experimental results, these scenarios are studied via thin-shell 0D and also magneto-hydrodynamic modeling with a coupled driver circuit model.

36 MATERIALS SCIENCE↗

Highly efficient blue organic light emitting devices with indium-free transparent anode on flexible substrates

Indium-free transparent conducting oxides may provide a lower cost solution for the transparent anode in flexible displays and energy efficient solid state lighting. We report herein a near room temperature sputtering process for generating an indium-free transparent conductive oxide (TCO) coating on a flexible substrate. Specifically, we deposited gallium-doped zinc oxide (GZO) uniformly over a 12” diameter area at room temperature on polyethylene terephthalate (PET). During deposition, the system heats to about 60oC due to the energetic sputtering conditions, without any noticeable damage to the PET substrate. The GZO films exhibit excellent physical, optical and electrical properties: roughness ~7 nm, transmittance >85% and resistivity ~ 10-3 ohm• cm. Phosphorescent blue organic light-emitting devices (OLEDs) were fabricated on these substrates with comparable performance (16% external quantum efficiency and 33 lm/W power efficiency at 1mA/cm2) to that of devices fabricated on GZO (or ITO) deposited on glass substrates, suggesting flexible GZO/PET substrates may be used instead of high-cost and rigid ITO and glass for flexible displays and solid state lighting.

36 MATERIALS SCIENCE↗

High-voltage (3.3 kV) 4H-SiC JBS diodes

High-voltage 4H-SiC junction-barrier Schottky (JBS) diodes have been fabricated and studied. The working area of the diodes (anode contact area) is 1.44 mm{sup 2}. At currents in the range from 10{sup -11} to 1.5 A, the forward current-voltage characteristic of the diodes is described in terms of the thermionic emission model, with the series resistance taken into account: Schottky barrier height {Phi}{sub B} = 1.16 eV, ideality factor n = 1.01, and series resistance R{sub s} = 2.2 {Omega} (32 m{Omega} cm{sup 2}). The value of R{sub s} is governed by the resistance of the blocking epitaxial n-base (impurity concentration N = 9 Multiplication-Sign 10{sup 14} cm{sup -3}, n-layer thickness d = 34 {mu}m). The diodes can block a reverse voltage of at least 3.3 kV (with a leakage current at room temperature on the order of 1 {mu}A). It is suggested that the leakage mechanism is associated with crystal lattice defects (dislocations) in SiC. It is shown that the reverse-recovery characteristics of the diodes are determined by the flow of a purely capacitive reverse current.

36 MATERIALS SCIENCE↗

Fabrication of vertically aligned ferroelectric polyvinylidene fluoride mesoscale rod arrays

Here, we have fabricated vertically aligned ferroelectric PVDF mesoscale rod arrays comprising and phases using a 200 nm diameter anodized aluminum oxide (AAO) as the porous template. We could synthesize the ferroelectric phase in mesoscale rod forms by combining the well-established recipe for crystallizing the phase using dimethyl sulfoxide (DMSO) at low temperature and template-guided infiltration processing for the rods using AAO. We also measured the dimensions of the PVDF rods by scanning electron microscopy and identified the polymorph phases by X-ray diffraction and Fourier transform infrared spectroscopy. The length of the rods varied from 3.82 m to 1.09 m and the diameter from 232 nm to 287 nm when the volume ratio between DMSO and acetone changed from 5 : 5 to 10 : 0. We obtained well-defined piezoresponse hysteresis loops for all rods with remnant piezoresponse ranging from 2.12 pm/V to 5.04 pm/V and coercive voltage ranging from 2.29 V to 2.71 V using piezoresponse force microscopy. These results serve as a processing platform for flexible electronic devices that need high capacitance and piezoelectric functionalities such as flexible memory devices or body energy harvesting devices for intelligent systems. (c) 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 3842-3848, 2013

36 MATERIALS SCIENCE↗

Plasma sputtering robotic device for in-situ thick coatings of long, small diameter vacuum tubes

A novel robotic plasma magnetron mole with a 50 cm long cathode was designed, fabricated, and operated. The reason for this endeavor is to alleviate the problems of unacceptable resistive heating of stainless steel vacuum tubes in the BNL Relativistic Heavy Ion Collider (RHIC). The magnetron mole was successfully operated to copper coat an assembly containing a full-size, stainless steel, cold bore, RHIC magnet tubing connected to two types of RHIC bellows, to which two additional pipes made of RHIC tubing were connected. To increase the cathode lifetime, a movable magnet package was developed, and the thickest possible cathode was made, with a rather challenging target to substrate (de facto anode) distance of less than 1.5 cm. Achieving reliable steady state magnetron discharges at such a short cathode to anode gap was rather challenging, when compared to commercial coating equipment, where the target to substrate distance is 10's cm; 6.3 cm is the lowest experimental target to substrate distance found in the literature. Additionally, the magnetron developed during this project provides unique omni-directional uniform coating. The magnetron is mounted on a carriage with spring loaded wheels that successfully crossed bellows and adjusted for variations in vacuum tube diameter, while keeping the magnetron centered. Electrical power and cooling water were fed through a cable bundle. The umbilical cabling system is driven by a motorized spool. Excellent coating adhesion was achieved. Measurements indicated that well-scrubbed copper coating reduced secondary electron yield to 1, i.e., the problem of electron clouds can be eliminated. Room temperature RF resistivity measurement indicated that a 10 μm copper coated stainless steel RHIC tube has a conductivity close to that of pure copper tubing. Excellent coating adhesion was achieved. The device details and experimental results are described.

36 MATERIALS SCIENCE↗