Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Adsorbent”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Pd-CeO 2 catalyst facilely derived from one-pot generated Pd@Ce-BTC for low temperature CO oxidation

Due to the capacity to offer abundant catalytic sites within porous solids featuring high surface areas, metal-organic frameworks (MOFs) and their derivatives have garnered considerable attention as prospective catalysts in environmental catalysis. Here, to promote the industrial application of MOFs, there is an urgent need for an effective and environmental-friendly preparation approach. Breaking through the limitation of the traditional two-step preparation method that Pd was introduced to the already prepared Ce-BTC (Pd/Ce-BTC, BTC = 1, 3, 5 benzenetricarboxylate), in this work, we present a novel one-pot solvothermal method for synthesizing the Pd material supported by Ce-BTC (Pd@Ce-BTC). After pyrolysis in N 2 flow or air flow, Pd-CeO 2 catalysts derived from Pd@Ce-BTC exhibited much higher CO oxidation activity than those from Pd/Ce-BTC. Moreover, Pd/Ce-BTC and Pd@Ce-BTC pyrolyzed in N 2 flow (Pd/Ce-BTC-N and Pd@Ce-BTC-N) could better catalyze the oxidation of CO than Pd/Ce-BTC and Pd@Ce-BTC pyrolyzed in air flow (Pd/Ce-BTC-A and Pd@Ce-BTC-A). Further characterizations revealed that the abundant surface Ce 3+ species, rich surface adsorbed oxygen species and superior redox properties were the main reasons for the superior CO oxidation activity of Pd@Ce-BTC-N.

36 MATERIALS SCIENCE↗
DOE OSTI2022

The role of surface forces in environment-enhanced cracking of brittle solids

Fracture initiation and propagation in brittle materials is promoted in surface-reactive (sorptive) environments, a phenomenon known as subcritical crack growth (SCG). Laboratory measured crack-propagation velocity vs. stress intensity factor relationships typically exhibit highly nonlinear, multi-stage characteristics that are sensitive to environmental factors such as adsorbate concentration and temperature. For practical purposes, empirical relationships (e.g., a power law) have been used to describe this complex phenomenon. However, how the overall SCG behavior emerges from the underlying fundamental processes near the crack tip, such as the interaction of the crack surfaces separated by only a few nanometers and mass transport within the nano-confined space, is still not well understood. This paper develops a mechanistic, surface-force-based fracture theory (SFFT) which integrates surface force models, fluid transport models, and linear elastic fracture mechanics to quantitatively explain the multi-stage characteristics of SCG in brittle solids. A numerical model is developed based on SFFT and solved through an implicit partitioned scheme for efficiency and modularity. The results are validated by Wiederhorn's data on crack propagation in soda-lime glasses at a wide range of relative humidity levels. We show that, for the first time, the entire range of an SCG curve can be captured by a single physics-based model. The predicted SCG curves reveal that the development of repulsive disjoining pressure behind the crack tip can be responsible for the reduced apparent fracture toughness in a sorptive environment. In conclusion, the shape of the SCG curve, and its changes with respect to the environment, is found to critically depend on the assumed transport models.

36 MATERIALS SCIENCE↗
DOE OSTI2020

An organogel library for solution NMR analysis of nanoparticle suspensions in non-aqueous samples

Surface contrast solution NMR methods (scNMR) are emerging as powerful tools to investigate the adsorption of small molecule ligands to the surface of nanoparticles (NP), returning fundamental insight into the kinetics and thermodynamics of sorption, as well as structural information on the adsorbed species. A prerequisite for the acquisition of high quality solution NMR data is the preparation of homogeneous and stable samples that return consistent NMR spectra and allow extensive signal averaging. Unfortunately, this condition does not apply to NMR samples containing NPs that often show a tendency to sediment and accumulate at the bottom of the NMR tube over the course of the experiment. We have recently shown that preparing NMR samples in an agarose gel matrix inhibits sedimentation and allows the characterization of small molecule-NP interactions by scNMR. Unfortunately, as the agarose gel only forms in aqueous solution, this sample preparation method cannot be used to stabilize NP suspensions in a non-aqueous environment. In this work, we introduce a library of 48 organogels, based on low molecular-mass organic gelators (LMOGs), to prepare NMR samples of small molecule/NP systems in a wide range of organic solvents. In addition, we present a simple method that takes advantage of 1H transverse relaxation (1H-R2) measurements to screen the library and identify the best gelator to characterize the small molecule-NP interaction of interest in the solvent of choice. We expect the results of this study will enable the preparation of homogeneous and stable samples of NPs in non-aqueous environments, therefore dramatically increasing the applicability of scNMR to the characterization of heterogeneous interactions and to the investigation of the role played by solvent molecules in regulating the kinetics and thermodynamics of sorption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Sensitivity and history match analysis of a carbon dioxide “huff-and-puff” injection test in a horizontal shale gas well in Tennessee

Due to improvements in well development, shale gas production has gained importance recently, especially in the United States. To improve gas production and develop a better understanding of shale reservoirs, researchers are conducting field tests to monitor CO 2 storage and enhanced gas recovery. Reservoir simulations can then utilize these field results for sensitivity studies, uncertainty analysis, history matching, gas production forecasts, and CO 2 storage capacity estimations. One such field test was performed for the Chattanooga Shale formation in Morgan County, Tennessee. Approximately 463 tonnes (510 tons) of CO 2 was successfully injected into a hydraulically fractured horizontal well over a thirteen-day period in March 2014. The injection test was achieved in four steps: pre-injection, injection, soaking, and flowback. In this paper, those steps were modeled with a reservoir simulator to match the historic production and injection rates with gas component compositions and forecast the production for five years. The reservoir fluid was modeled as a multi-component gas, including CH 4 , C 2 H 6 , C 3 H 8 , N 2 , and CO 2 . Langmuir constants, reservoir pressure, and fracture network volume were adjusted to match simulation results with observed production rates and gas composition. Results showed that, under the same reservoir conditions, each gas component behaves differently by way of compositional changes in production. CH4 behaves like N2, while CO 2 behaves like heavier hydrocarbons such as C 2 H 6 and C 3 H 8 . CO 2 plume results showed that, after injection, the produced CO 2 is mostly derived from fractured limestone (i.e., Fort Payne Formation) because the injected CO 2 is not adsorbed in limestone but rather by shale formations.

03 NATURAL GAS↗
DOE OSTI2020

Pore size effect on selective gas transport in shale nanopores

In shale gas production, gas composition may vary over time. To understand this phenomenon, we use molecular dynamics simulations to study the permeation of CH 4 , C 2 H 6 and their mixture from a source container through a pyrophyllite nanopore driven by a pressure gradient. For a pure gas, the flow rate of CH 4 is always higher than that of C 2 H 6 , regardless of pore size. For a 1:1 C 2 H 6 : CH 4 mixture, however, C 2 H 6 :CH 4 flow rate ratio is higher than the compositional ratio in the container (i.e., 1:1) when the pore size is smaller than ~1.8 nm. The selective transport is caused by the competitive adsorption of C 2 H 6 over CH 4 in the nanopore. The selectivity is also determined by the interplay between the surface diffusion of the adsorbed molecules and the viscous flow in the center of the pore, and it diminishes as the viscous flow becomes to dominate the surface diffusion when the pore size becomes larger than 1.8 nm. Our work shows that compositional differentiation of shale gas in production is a consequence of nanopore confinement and therefore a key characteristic of an unconventional reservoir. Finally, the related compositional information can potentially be used for monitoring the status of a production well such as its recovery rate.

03 NATURAL GAS↗
DOE OSTI2020

Adsorption of furan, hexanoic acid, and alkanes in a hierarchical zeolite at reaction conditions: Insights from molecular simulations

Hierarchical zeolites containing both micropores and mesopores are valuable catalysts for facilitating reactions of large molecules. Furan acylation by fatty acids is a promising reaction for valorizing biomass, and the self-pillared pentasil (SPP) zeolite was found to perform particularly well for this reaction. To better understand the distribution of molecules in hierarchical zeolites at the elevated temperature (T = 523 K) and the elevated pressure (p >1 bar) associated with typical reaction conditions, unary and binary adsorption were predicted using Monte Carlo simulations in the isothermal–isobaric Gibbs ensemble. Adsorption of six species (furan, hexanoic acid, -hexane, -decane, -tetradecane, and 3,6-diethyloctane) was investigated from vapor, liquid, and supercritical phases, and loadings into the micropores, onto the mesopore surface, and in the mesopore interior of SPP were obtained. As pressure increases, -alkanes fill the micropores before loading the surface and then the interior of the mesopore, while furan and hexanoic acid adsorb strongly to the mesopore surface due to hydrogen bonding interactions with surface silanols. Hydrogen bonding interactions also draw hexanoic acid molecules in the micropore region toward the pore mouths, so their carboxylic acid group forms H-bonds with silanols, while the alkyl tails interact with the micropore walls. Mesopore condensation is observed for molecules below their critical point, and occurs when the Gibbs free energy of transfer into the mesopore interior and onto the mesopore surface converge. When hexanoic acid adsorption occurs in the presence of alkane solvents, then the selectivity and spatial distribution of hexanoic acid in the micropores and on the surface can be tuned by adjusting the fluid pressure and the alkane length and/or branching.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Rational design of septenary high-entropy alloy for direct ethanol fuel cells

Promoting C–C bond cleavage of ethanol by a complete 12-electron (12e) ethanol oxidation reaction (EOR) is a grand challenge for the development of highly efficient direct ethanol fuel cells (DEFCs). Most state-of-the-art catalysts only implement the EOR in an incomplete 4e or 2e pathway because of the poisoning of the catalysts by strongly adsorbed CO, leading to the poor output performance and low cell efficiency of DEFCs. Herein, a septenary PtPdFeCoNiSnMn high-entropy alloy (PtPd HEA) with a PtPd-rich surface but super-low platinum group metals loading was developed. We identified and proved the functions of each element in the PtPd HEA. The DEFCs assembled with the PtPd HEA (0.12 mg PtPd ∙cm -2 ) achieved a maximum power density of 0.72 W cm -2 and a durable operation for 1,200 h, which outperforms state-of-the-art catalysts for DEFCs. This work will be a design principle for nanostructured alloy development for renewable energy and sustainability applications.

25 ENERGY STORAGE↗
DOE OSTI2020

Consequences of long-term water exposure for bulk crystal structure and surface composition/chemistry of nickel-rich layered oxide materials for Li-ion batteries

Water exposure of layered nickel-rich transition metal oxide electrodes, widely used in high-energy lithium-ion batteries, has detrimental effects on the electrochemical performance, which complicates electrode handling and prevents implementation of environmentally benign aqueous processing procedures. Elucidating the degradation mechanisms in play may help rationally mitigate/circumvent key challenges. Here, the bulk structural consequences of long-term (>2.5 years) deuterated water (D2O) exposure of intercalation materials with compositions Li x Ni 0.5 Co 0.2 Mn 0.3 O 2 (NCM523) and Li x Ni 0.8 Co 0.1 Mn 0.1 O 2 (NCM811) are studied by neutron powder diffraction (NPD). Detailed inspection of the NPD data reveals gradual formation of a secondary crystalline phase in all exposed samples, not previously reported for this system. This unknown phase forms faster in liquid- compared to vapor-exposed compounds. Structural modelling of the NPD data shows a stable level of Li/Ni anti-site defects and does not indicate any significant changes in lattice parameters or hydrogen-lithium (D + /Li + ) exchange in the structure. Consequently, the secondary phase formation must take place via transformation rather than modification of the parent material. X-ray photoelectron spectroscopy data indicate formation of LiHCO 3 /Li 2 CO 3 at the surface and a Li-deficient oxide in the sub-surface region of the pristine compounds, and the presence of adsorbed water and transition metal hydroxides at the exposed sample surfaces.

25 ENERGY STORAGE↗
DOE OSTI2026

Blended conventional and high oxygen permeability ionomers as a fuel cell electrode binder

Ionomer strongly influences the performance of proton exchange membrane fuel cells (PEMFCs), affecting catalyst activity and reactant transport within the electrodes. While recent work on high oxygen permeability ionomers (HOPI) has demonstrated improved performance compared to conventional perfluorosulfonic acid (PFSA) ionomers such as Nafion™, there have also been reports of increased cracking in fabricated electrodes. We investigated the effects of blending HOPI with Nafion™ ionomer dispersions when fabricating cathode catalyst layers (CCLs). Small-angle x-ray scattering suggests that the ionomers mix well, and adsorption measurements indicate that HOPI adsorbs less strongly to the carbon-supported platinum (Pt) catalyst, and in blends, the Nafion™ ionomer exhibits a greater degree of adsorption. Imaging CCLs revealed a decrease in crack formation in blended samples as HOPI content decreased, with 14% HOPI having the lowest crack density. In a membrane electrode assembly (MEA) using a high surface area carbon support, the 14% HOPI blend exhibited similar performance to 100% HOPI. However, similar performance enhancements were not achieved with a medium surface area carbon support. These findings suggest a path for low-crack CCLs with enhanced oxygen transport, while highlighting a need for further investigation of ionomer blending towards efficient and durable PEMFCs.

25 ENERGY STORAGE↗
DOE OSTI2021

Radiolysis of thermally dehydrated gibbsite

Aluminum hydroxide (gibbsite, Al (OH) 3 ) powders and their thermally dehydrated forms were rehydrated and irradiated with gamma rays to examine the effects of the collapse of the crystalline gibbsite structure as it is converted to alumina on the transport of precursors of molecular hydrogen to the surface. The amount of hydrogen gas, H 2 , production from irradiated gibbsite and its transition phases with adsorbed water increased substantially with increasing temperature for dehydration of the samples, up to a point. Furthermore, the production of H 2 for samples without water was considerably lower than the hydrated samples signifying the importance of surface water and the transport of precursors to the surface. EPR spectroscopy showed that the major radiolytic products are trapped electrons and related O – centers. Thermal gravimetric analysis (TGA) measurements of gibbsite dehydration established the temperatures of phase transitions from gibbsite to alumina. Changes to the surface and structure of gibbsite and its transition phases following irradiation were analyzed using nitrogen adsorption, powder X-ray diffraction (pXRD), Raman spectroscopy, electron paramagnetic resonance (EPR), and scanning electron microscopy (SEM). pXRD and Raman spectra showed amorphorization at about 300 °C, coupled to a substantial increase in specific surface area due to increasing porosity.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2023

Copper-nickel electroplating of 3D-printed acrylonitrile butadiene styrene for interference and radiation shielding applications

Here, in this study, electromagnetic and radiation shielding structures were fabricated by 3D printing acrylonitrile butadiene styrene (ABS) structures via fused filament fabrication and electroplating with copper (Cu) and nickel (Ni) metals. Prior to electroplating, the printed ABS materials were made conductive by surface electrodeposition of polypyrrole (PPy). ABS adsorbs the pyrrole monomer, which subsequently polymerizes via oxidation forming conductive PPy layer on the printed structures. The successful anchoring of PPy layer can be attributed to its hydrogen bonding and electrostatic interactions with ABS. Thermal analysis, optical, and electron microscopy equipped with energy dispersive X-ray were employed to characterize the printed shielding structures, while the interference and radiation shielding effectiveness were evaluated using a spectrum analyzer and dosimeter, respectively. The interference shielding was found to be effective at 60 ± 5 dB over relatively small frequency range. Shielding was also apparent against gamma and X-ray ionizing rays, but more significantly effective against beta rays. Furthermore, the Cu/Ni coating was able to reduce any heat-induced dimensional changes for the 3D printed ABS substrate without compromising the mechanical integrity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Defect engineering of porous aromatic frameworks via end capping improves dioxane removal from water

Amorphous porous organic polymers show promise for energy-efficient adsorptive separations, but it is difficult to understand or improve their performance through intentional structural modification. Herein, we report the synthesis of porous aromatic frameworks (PAFs) with pore structures tailored by the incorporation of a monofunctionalized end-capping monomer that disrupts framework topology. Combining experimental characterization with molecular simulations, we show that this defect engineering strategy yields less densely crosslinked networks, which leads to pore collapse and the presence of unique adsorption sites. These defect-engineered PAFs exhibit enhanced removal of 1,4-dioxane, an important environmental pollutant, from water. Increasing the concentration of end-capping monomers produces PAFs with narrower pore size distributions and improved 1,4-dioxane uptake. These results illustrate that defect engineering can effectively modulate polymer connectivity and porosity for applications in selective adsorptive separations. In conclusion, this technique avoids post-synthetic treatments and presents another approach to tailor amorphous polymeric adsorbents.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Heterogeneous catalysis: Optimal performance at a phase boundary?

Most of the industrially used heterogeneous catalysts have been discovered by trial and error, and despite decades of experience, the discovery of new catalysts continues to be extremely challenging. The drive to uncover guiding principles in catalyst design is more present than ever. We share a series of observations indicating that optimal catalysts typically function at characteristic phase boundaries (e.g., abrupt changes in adsorbate coverage, catalyst structure, etc.) accessed in the reaction conditions. The catalyst exploits the associated instability—the desire to exist in multiple states simultaneously—as a driving force for chemical transformations. In other words, phase boundaries are good places to start the catalyst search, and indeed, we should focus on at least two phases at once rather than just one. Here, we substantiate this claim with several studies that combine statistical operando modeling and experiments. Transpiring from these observations is a hitherto unrecognized vector in catalyst discovery.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Effect of humidity of build chamber in hybrid manufacturing systems on part performance

Here hybrid manufacturing combines additive with subtractive machining operations which often require the use of a coolant, that can increase the humidity of the build chamber. The water vapor can be adsorbed on the powder surfaces and subsequently dissociate into hydrogen and oxygen during melting and can be absorbed by part during solidification. Here, we investigated the effect of build chamber humidity during hybrid manufacturing on the part quality on two most common classes of steels i.e., austenitic (316L) and ferritic (grade 91). We report that the humidity increase has a negligible effect on part performance of both classes of steels.

316L stainless steel↗
DOE OSTI2022

Self-seeded growth of very large open-structured zeolite nanosheet assemblies with extraordinary micropore accessibility

Zeolite nanosheets (ZNs) offer improved micropore accessibilities and transport properties for enhanced molecular catalysis and separations. However, practical application of the ZN materials is hampered by the lack of efficient synthesis methods. Here, in this work, a ZN self-seeded method is demonstrated for single-step reproduction of flower-like assemblies of very large MFI ZN plates. The ZN plates are ~60 nm-thick stacks of 4-nm-thick single-crystal sheets. The ZN flower growth involves terrace nucleation on the seed surfaces and subsequent ZN epitaxial growth in [010] orientation directed by a diquaternary agent. The open architecture of the assemblies prevented collapse and agglomeration of ZNs during thermal activation that effectively preserved the interconnected intra-sheet and inter-sheet micropore system. Thus, the ZN assemblies exhibited markedly enhanced molecular adsorption capacity and transport diffusivity for the probing xylene molecules as compared to the conventional crystals. The ZN assembly and its harvestable very large-sized ZNs have the potential for developing high-performance ZN adsorbents, catalysts, and molecular-sieve membranes.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Alkene adsorption and cracking on acidic zeolites – A gradual process of understanding

Cracking of light alkenes on solid acids and, in particular on zeolites, is ubiquitous in refineries. Different zeolite framework topologies in the catalysts used provide spatial constraints for reactants and products, leading to discrete reaction routes and varying selectivities. The conversion of alkenes in cracking proceeds either via monomolecular or bimolecular reaction pathways. In both routes, the reacting alkene adsorbs first on Brønsted acid sites forming the initial state (e.g., π-complex, carbenium ion or alkoxide), followed by β-cleavage in the carbenium transition state, generating a smaller alkene and a carbenium ion (monomolecular route) or forming a dimer by alkene addition that cracks subsequently (bimolecular route). The current state of understanding alkene sorption and cracking is critically discussed in this paper and four questions are formulated that may be the central questions from our perspective in further developing new generations of catalysts and processes for alkene conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Synthesis of PHI-type zeolite harmotome using barium as an inorganic structure-directing agent inspired from natural mineral compositions

Zeolites are nanoporous aluminosilicates widely used as commercial adsorbents, heterogeneous catalysts, and ion-exchange materials due to their unique porosity, acidity, and thermal stability. The vast majority of synthetically-realized zeolite structures are prepared under hydrothermal conditions in alkaline media, and often in the presence of an organic structure-directing agent that facilitates the crystallization of diverse porous networks. Due to economic and environmental disadvantages of organic-based syntheses, it is often desirable to produce zeolites in organic-free media using alkali metal ions as the most commonly employed inorganic structure-directing agents (ISDAs). Here, in this study, we were inspired by the elemental compositions of natural zeolite minerals to examine the use of an alkaline earth metal ion as the ISDA to prepare zeolites with the PHI framework type. Two natural minerals exhibiting this crystal structure are phillipsite and harmotome. Both structures contain sodium and potassium as extra-framework cations, but only harmotome contains barium cations. Here we examined how the combination of alkali and alkaline earth ISDAs promote the formation of PHI-type zeolites. Our findings reveal that each isostructure is prepared under different synthesis conditions where simply adding barium to a growth mixture does not always lead to harmotome formation. Harmotome is formed in more dilute and alkaline growth media; however, time-resolved analyses of zeolite crystallization reveal that harmotome can be synthesized at low temperatures (ca. 65 °C) with rates that are 5-times faster than syntheses of phillipsite. This seemingly indicates that barium reduces the energetic barrier for PHI-type zeolite nucleation in ways that are not fully understood. Moreover, harmotome crystals exhibit an average particle size of ca. 60 nm, which is nearly 40-fold smaller than phillipsite crystals prepared under similar conditions. Collectively, these findings identify routes to control crystallization of PHI-type zeolites and may provide a broader strategy for using the composition of natural zeolite minerals to optimize the preparation of synthetic analogues.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Enantioselective catalysts based on metal-organic framework-supported nucleotides

Adenosine triphosphate (ATP) and other nucleotides can be irreversibly bound to the metal-organic framework (MOF) MIL-101(Cr). Analysis of X-ray diffraction data suggests that the location of the adsorbed ATP molecule is in proximity of the Cr 3 clusters. Solid-state NMR and DFT calculations indicate that ATP is bound to MIL-101(Cr) through linkages of the terminal phosphate group with Cr(III) of the framework. In the presence of Cu(II) ions, the MOF-supported nucleotides can function as stable and reusable enantioselective heterogeneous catalysts for reactions like Diels-Alder and Michael addition. In conclusion, compared to the corresponding homogeneous nucleotide-based artificial metalloenzymes (ArMs), the MOF-supported nucleotide-based ArMs exhibit significantly enhanced activity and selectivity in certain cases, demonstrating their potential as a new class of enantioselective heterogeneous catalysts.

36 MATERIALS SCIENCE↗