Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AMINES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Photon upconversion characteristics of intense green emitting BaYF5:Yb3+,Er3+ nanoclusters prepared by reverse microemulsion

Highlights: • First-time synthesis of BaYF{sub 5}:Yb{sup 3+},Er{sup 3+} nanocluster by reverse microemulsion. • Intense Green upconversion emission under 980 nm excitation. • Proposed a mechanism for nanocluster formation based on XRD, FTIR and HRTEM results. • X-ray Rietveld refinement conformation on the formation of cubic BaYF{sub 5}. • BaYF{sub 5}:Yb{sup 3+},Er{sup 3+} nanocluster exhibited significant the cell viability against HT29 cells. - Abstract: This work presents the first time synthesis of photon upconverting cubic BaYF{sub 5}:Yb{sup 3+},Er{sup 3+} nanoclusters by a novel reverse microemulsion method. Rietveld refinement analysis confirmed the cubic BaYF{sub 5} and BaYF{sub 5}:Yb,Er. The spherical nanoclusters (∼35 nm) are formed by an ensemble of ∼10 nm individual nanocrystals. A plausible formation mechanism is explained based on HRSEM and HRTEM investigations. FTIR revealed the effect of CTAB and oleic acid surfactants on amine and carboxyl functionalization. The cubic BaYF{sub 5}:Yb,Er nanoclusters exhibited an intense green upconversion emission under 980 nm excitation. A three-fold upconversion green emission enhancement was achieved by increasing the calcination temperature from 200 °C to 400 °C. The energy transfer mechanism is described based on pump power dependent upconversion luminescence intensity. Furthermore, cytotoxicity effect of the different concentrations (2.5–300 μg/mL) of the BaYF{sub 5}:Yb,Er were investigated against human colon adenocarcinoma cell line (HT29 cells) for 24 h and 48 h treatment.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

Maximizing the grafting of zwitterions onto the surface of ultrafiltration membranes to improve antifouling properties

Superhydrophilic zwitterions have been extensively exploited for surface modification to improve antifouling properties. However, it remains challenging to form layers of <20 nm with high zwitterion content on the surfaces with different degrees of hydrophilicity. We demonstrate that amine-functionalized sulfobetaine (SBAm) can be co-deposited with dopamine on ultrafiltration (UF) membranes, leading to a thickness of 10 nm to 50 nm and an SBAm content of up to 31 mass% in the coating layers. The covalently grafted SBAm is stable underwater and improves the antifouling properties, as evidenced by the lower trans-membrane pressure required to retain targeted water fluxes than that required for the pristine membranes. Finally, the SBAm is also more effective than conventionally used sulfobetaine methacrylate (SBMA) for the zwitterion grafting on the surface to improve antifouling properties

42 ENGINEERING↗
DOE OSTI2024

The carbon challenge: Design, synthesis, and chemisorption behavior of solid sorbents in direct air capture of carbon dioxide

Direct air capture (DAC) of CO 2 is a promising solution for reducing the carbon footprint through "negative emission" technology. However, the low CO 2 concentration (~400 ppm) and the dynamic nature of DAC processes present challenges in designing effective sorbent systems. Recent advancements in material design and structural engineering have led to the development of high-performance solid sorbents, offering a more stable, safe, and energy-efficient alternative to traditional liquid CO 2 capture methods. This review highlights progress in solid sorbent-based DAC, focusing on amine-modified materials, hydrogen-bonded frameworks, and ionic liquid-engineered scaffolds. The discussion covers design principles, synthesis methodologies, and their impact on CO 2 chemisorption, comparing the advantages and limitations of each approach. Characterization techniques, especially operando methods and computational tools, are reviewed to understand sorbent behavior during CO 2 integration and release. The reaction pathways and interaction mechanisms of these sorbents with CO 2 are analyzed to guide future design. Additionally, the CO 2 chemisorption behaviors, including capacity, sorption kinetics, recyclability, and durability in the presence of gaseous impurities and under humid conditions will be evaluated and compared. Further, the review offers unique insights into the physical properties, chemical structures, and surface engineering effects of these sorbents, based on comprehensive characterization and evaluation techniques.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2013

Pharmacokinetic drivers of toxicity for basic molecules: Strategy to lower pKa results in decreased tissue exposure and toxicity for a small molecule Met inhibitor

Several toxicities are clearly driven by free drug concentrations in plasma, such as toxicities related to on-target exaggerated pharmacology or off-target pharmacological activity associated with receptors, enzymes or ion channels. However, there are examples in which organ toxicities appear to correlate better with total drug concentrations in the target tissues, rather than with free drug concentrations in plasma. Here we present a case study in which a small molecule Met inhibitor, GEN-203, with significant liver and bone marrow toxicity in preclinical species was modified with the intention of increasing the safety margin. GEN-203 is a lipophilic weak base as demonstrated by its physicochemical and structural properties: high LogD (distribution coefficient) (4.3) and high measured pKa (7.45) due to the basic amine (N-ethyl-3-fluoro-4-aminopiperidine). The physicochemical properties of GEN-203 were hypothesized to drive the high distribution of this compound to tissues as evidenced by a moderately-high volume of distribution (Vd > 3 l/kg) in mouse and subsequent toxicities of the compound. Specifically, the basicity of GEN-203 was decreased through addition of a second fluorine in the 3-position of the aminopiperidine to yield GEN-890 (N-ethyl-3,3-difluoro-4-aminopiperidine), which decreased the volume of distribution of the compound in mouse (Vd = 1.0 l/kg), decreased its tissue drug concentrations and led to decreased toxicity in mice. This strategy suggests that when toxicity is driven by tissue drug concentrations, optimization of the physicochemical parameters that drive tissue distribution can result in decreased drug concentrations in tissues, resulting in lower toxicity and improved safety margins. -- Highlights: ► Lower pKa for a small molecule: reduced tissue drug levels and toxicity. ► New analysis tools to assess electrostatic effects and ionization are presented. ► Chemical and PK drivers of toxicity can be leveraged to improve safety.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2014

A novel assessment of nefazodone-induced hERG inhibition by electrophysiological and stereochemical method

Nefazodone was used widely as an antidepressant until it was withdrawn from the U.S. market in 2004 due to hepatotoxicity. We have investigated methods to predict various toxic effects of drug candidates to reduce the failure rate of drug discovery. An electrophysiological method was used to assess the cardiotoxicity of drug candidates. Small molecules, including withdrawn drugs, were evaluated using a patch-clamp method to establish a database of hERG inhibition. Nefazodone inhibited hERG channel activity in our system. However, nefazodone-induced hERG inhibition indicated only a theoretical risk of cardiotoxicity. Nefazodone inhibited the hERG channel in a concentration-dependent manner with an IC{sub 50} of 45.3 nM in HEK-293 cells. Nefazodone accelerated both the recovery from inactivation and its onset. Nefazodone also accelerated steady-state inactivation, although it did not modify the voltage-dependent character. Alanine mutants of hERG S6 and pore region residues were used to identify the nefazodone-binding site on hERG. The hERG S6 point mutants Y652A and F656A largely abolished the inhibition by nefazodone. The pore region mutant S624A mildly reduced the inhibition by nefazodone but T623A had little effect. A docking study showed that the aromatic rings of nefazodone interact with Y652 and F656 via π–π interactions, while an amine interacted with the S624 residue in the pore region. In conclusion, Y652 and F656 in the S6 domain play critical roles in nefazodone binding. - Highlights: • Nefazodone inhibits hERG channels with an IC{sub 50} of 45.3 nM in HEK-293 cells. • Nefazodone blocks hERG channels by binding to the open channels. • Y652 and F656 are important for binding of nefazodone. • The aromatic rings of nefazodone interact with Y652 and F656 via π–π interactions.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2016

Riccardin D-N induces lysosomal membrane permeabilization by inhibiting acid sphingomyelinase and interfering with sphingomyelin metabolism in vivo

Lysosomes are important targets for anticancer drug discovery. Our previous study showed that Riccardin D-N (RD-N), a natural macrocylic bisbibenzyl derivative produced by Mannich reaction, induced cell death by accumulating in lysosomes. Experiments were performed on human lung squamous cell carcinoma tissue from left inferior lobar bronchus of patient xenografts and H460 cells. RD-N was administrated for 25 days. The specimens of xenografts in Balb/c athymic (nu +/nu +) male mice were removed for immunohistochemistry, subcellular fractionation, enzyme activities and Western blotting analysis. mRFP-GFP-LC3 reporter was used to examine autophagy in H460 cells. Sphingomyelin assay was evaluated by thin-layer chromatography and assay kit. Lysosomal membrane permeabilization (LMP) caused by acid sphingomyelinase (ASM) inhibition and subsequent changes of sphingomyelin (SM) metabolism selectively destabilized the cancer cell lysosomes in RD-N-treated H460 cells in vitro and tumor xenograft model in vivo. The destabilized lysosomes induced the release of cathepsins from the lysosomes into the cytosol and further triggered cell death. These results explain the underlying mechanism of RD-N induced LMP. It can be concluded that a more lysosomotropic derivative was synthesized by introduction of an amine group, which could have more potential applications in cancer therapy. - Highlights: • Riccardin D-N (RD-N) significantly downregulated LAMP1 expressions. • RD-N inhibited the acid sphingomyelinase activity. • RD-N induced lysosomal membrane permeabilization in vivo. • RD-N induced SM accumulation in the lysosomal membranes. • RD-N also induced the release of cathepsins from destabilized lysosomes.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2016

Ecofriendly syntheses of phenothiazones and related structures facilitated by laccase – A comparative study

The biocatalytic synthesis of phenothiazones and related compounds has been achieved in an aqueous system under mild conditions facilitated by laccase oxidation. It was found that by coupling 2-aminothiophenol directly with 1,4-quinones, the product yields could be significantly increased compared to generating the 1,4-quinones in situ from the corresponding hydroquinones via laccase oxidation. However, laccase still proved to be pivotal for achieving highest product yields by catalyzing the final oxidation step. Furthermore, a difference in reactivity of aromatic and aliphatic amines toward 1,4-naphthoquinone is observed. Furthermore, this study provides a sustainable approach to the synthesis of a biologically important class of compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Reprocessable and Recyclable Polymer Network Electrolytes via Incorporation of Dynamic Covalent Bonds

Mechanically durable polymer network electrolytes are desirable for batteries; however, covalent cross-linking adversely affects their large-scale manufacturing, and they are difficult to recycle post-lifespan. In this work, we address the electrolyte reprocessability and recyclability challenges through the use of dynamic covalent bonds for polymer network solid electrolytes. Specifically, the associative dynamic vinylogous urethane motif is incorporated into a poly(ethylene oxide) network electrolyte containing lithium bis(fluorosulfonyl)imide (LiFSI) salt. The resulting dynamic covalent network electrolyte possesses a modest ion conductivity (~10–5 S/cm at room temperature) and good reprocessability. Stress–relaxation studies indicate that the LiFSI salt can catalyze the bond exchange and enhance the network dynamics. Furthermore, the reprocessability associated with bond exchange can be tuned by simply adjusting the formulation of reagent compositions, in which increasing the amount of excess amine or using a shorter chain of PEO prepolymer can further enhance the network dynamics and corresponding reprocessability.

25 ENERGY STORAGE↗
DOE OSTI2016

Evaluating the energy performance of a hybrid membrane-solvent process for flue gas carbon dioxide capture

In this study, a particularly energy intensive step in the conventional amine absorption process to remove carbon dioxide is solvent regeneration using a steam stripping column. An attractive alternative to reduce the energy requirement is gas pressurized stripping, in which a high pressure noncondensable gas is used to strip CO 2 off the rich solvent stream. The gas pressurized stripping column product, having CO 2 at high concentration and high partial pressure, can then be regenerated readily using membrane separation. In this study, we performed an energetic analysis in the form of total equivalent work and found that, for capturing CO 2 from flue gas, this hybrid stripping process consumes 49% less energy compared to the base case conventional MEA absorption/steam stripping process. We also found the amount of membrane required in this process is much less than required for direct CO 2 capture from the flue gas: approximately 100-fold less than a previously published two-stage cross-flow scheme, mostly due to the more favorable pressure ratio and CO 2 concentration. There does exist a trade-off between energy consumption and required membrane area that is most strongly affected by the gas pressurized stripper operating pressure. While initial analysis looks promising from both an energy requirement and membrane unit capital cost, the viability of this hybrid process depends on the availability of advanced, next generation gas separation membranes to perform the stripping gas regeneration.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2016

Allosteric Inhibition of SHP2: Identification of a Potent, Selective, and Orally Efficacious Phosphatase Inhibitor

SHP2 is a nonreceptor protein tyrosine phosphatase (PTP) encoded by the PTPN11 gene involved in cell growth and differentiation via the MAPK signaling pathway. SHP2 also purportedly plays an important role in the programmed cell death pathway (PD-1/PD-L1). Because it is an oncoprotein associated with multiple cancer-related diseases, as well as a potential immunomodulator, controlling SHP2 activity is of significant therapeutic interest. Recently in our laboratories, a small molecule inhibitor of SHP2 was identified as an allosteric modulator that stabilizes the autoinhibited conformation of SHP2. A high throughput screen was performed to identify progressable chemical matter, and X-ray crystallography revealed the location of binding in a previously undisclosed allosteric binding pocket. Structure-based drug design was employed to optimize for SHP2 inhibition, and several new protein–ligand interactions were characterized. Furthermore, these studies culminated in the discovery of 6-(4-amino-4-methylpiperidin-1-yl)-3-(2,3-dichlorophenyl)pyrazin-2-amine (SHP099, 1), a potent, selective, orally bioavailable, and efficacious SHP2 inhibitor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Synthesis of Perdeuterated Alkyl Amines/Amides with Pt/C as Catalyst under Mild Conditions

A convenient method for the synthesis of perdeuterated alkyl amides/amines is disclosed. Perdeuterated acetyl amides can be achieved by a hydrogen–deuterium (H/D) exchange protocol with Pt/C as a catalyst and D 2 O as a deuterium source under mild conditions. Further, after removal or reduction of the acetyl group, this protocol can provide perdeuterated primary, secondary, and tertiary amines, which are difficult to achieve via other methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Importance of Dispersion in the Molecular Geometries of Mn(III) Spin-Crossover Complexes

The computational investigation of the molecular geometries of a pair of manganese(III) spin-crossover complexes is reported. For the geometry of the quintet high-spin state, density functionals significantly overestimate Mn–Namine bond distances, although the geometry for the triplet intermediate-spin state is well described. Here, comparisons with several wave function-based methods demonstrate that this error is due to the limited ability of commonly used density functionals to recover dispersion beyond a certain extent. Among the methods employed for geometry optimization, restricted open-shell Møller–Plesset perturbation theory (MP2) appropriately describes the high-spin geometry but results in a slightly shorter Mn–O distance in both spin states. On the other hand, extended multistate complete active space second-order perturbation theory (XMS-CASPT2) provides a good description of the geometry for the intermediate-spin state but also sufficiently recovers dispersion, performing well for the high-spin state. Despite the fact that the electronic structure of both spin states is dominated by one-electron configuration, XMS-CASPT2 offers a balanced approach, leading to molecular geometries with much better agreement with experiment than MP2 and DFT. A scan along the Mn–N amine bond demonstrates that for these complexes coupled cluster methods (i.e., DLPNO-CCSD(T)) also yield bond distances in agreement with experiment while multiconfiguration pair density functional theory (MC-PDFT) is unable to recover dispersion well enough, analogous to single-reference DFT.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Inferring the Energetics of CO 2 –Aniline Adduct Formation from Vibrational Spectroscopy

Control of atmospheric CO 2 is an important contemporary scientific and engineering challenge. Towards this goal, the reaction of CO 2 with amines to form carbamate bonds is an established method for CO 2 capture. However, controllable reversal of this reaction remains difficult and requires tuning the energetics of the carbamate bond. Through IR spectroscopy, we show that a characteristic frequency observed upon carbamate formation varies as a function of the substituent’s Hammett parameter for a family of para- substituted anilines. We present computational evidence that the vibrational frequency of the adducted CO 2 serves as a predictor of the energy of formation of the carbamate. Electron donating groups typically enhance the driving force of carbamate formation by transferring more charge to the adducted CO 2 and thus increasing the occupancy of the anti-bonding orbital in the carbon-oxygen bonds. Increased occupancy of the anti-bonding orbital within adducted CO 2 indicates a weaker bond, leading to a red shift in the characteristic carbamate frequency. As a result, our work serves the large field of CO 2 capture research where spectroscopic observables, such as IR frequencies, are more easily obtainable and can stand in as a descriptor of driving forces.

Amines↗
DOE OSTI2021

Self-Assembly of a Linear Alkylamine Bilayer around a Cu Nanocrystal: Molecular Dynamics

Copper nanocrystals are often grown with the help of alkylamine capping agents, which direct the nanocrystal shape. However, the role of these molecules is still unclear. We characterized the assembly of aqueous tetradecylamine (TDA) around a Cu nanocrystal and found that TDA exhibits a temperature-dependent bilayer structure. The bilayer involves an inner layer, in which TDA binds to Cu via the amine group and tends to orient the alkyl tail perpendicular to the surface, and an outer layer whose structure depends on temperature. At low temperatures, alkylamines in the inner layer form bundles with no apparent relation to the crystal facets. Alkylamines in the outer layer tend to orient their long axes perpendicular to the Cu surfaces, with interdigitation into the inner layer. At high temperatures, alkylamines in the inner layer lose their bundle structure, and outer-layer alkylamines tend to orient themselves tangential to the Cu surfaces, forming a “web” above inner-layer TDA. TDA exhibits a rapid interlayer exchange at typical synthesis temperatures, consistent with experiment. Here, the variety in the assemblies seen here and in other studies of alkanethiols around gold nanocrystals indicates a richness in the assemblies that can be achieved by modulating the interaction between the strongly binding end group and the surface.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

Photoinduced Carbon Dioxide Release via a Metastable Photoacid in a Nonaqueous Environment

Capturing and concentrating carbon dioxide (CO 2 ) from the atmosphere is an important modern scientific and technological challenge. CO 2 can be captured by forming a carbamate bond with amines, most notably monoethanolamine (MEA). Regenerating MEA by releasing the captured CO 2 requires heating the carbamate solution, which is energy-demanding and wasteful. Recently, photoacids were used to convert light input into pH change, which in turn released CO 2 from aqueous carbonate solutions. Here, we report a merocyanine photoacid that releases CO 2 from a non-aqueous carbamate solution of MEA, thereby extending the utility of this concept to a wider range of capture agents and environments. Based on the absorption spectra of the photoacid in the presence of acids and CO 2 , we show that the photoacid cycle and the CO 2 capture of MEA are two separate equilibria that are coupled to each other via protons. Then, we demonstrate that irradiating 405 nm light on the sample can induce release of CO 2 which we detect using an in-line mass spectrometer. This work highlights an alternative path for optimizing a photo-induced CO 2 capture and release system.

Amines↗
DOE OSTI2024

Adverse Effect of Polyelectrolyte Complexation on the CO 2 Permeability of Polyvinylamine Copolymers

Polyvinylamine (PVAm) is one of the most studied polymers for facilitated transport membranes (FTMs) in CO 2 separation applications. In this study, poly(N-vinylformamide) (PNVf) was hydrolyzed to prepare a range of PNVf-PVAm copolymer compositions and the effect of PVAm fraction on CO 2 permeability and CO 2 /N 2 selectivity these polymers examined. The most permeable film was the polymer containing 52 mol% PVAm units with a CO 2 permeability of 353 Barrer and CO 2 /N 2 selectivity of 96, when tested at 60°C with humidified 14/86 CO 2 /N 2 mixed gas. Despite containing a higher loading of amines to act as CO 2 carriers, higher PVAm contents yielded significantly lower CO 2 permeability, without a loss of selectivity. This trend was not due to polymer crystallization since none of the PVAm films exhibited crystallinity in X-ray diffraction analysis. The loss of gas permeability at high PVAm content was instead due to strong polyelectrolyte interactions between polymer chains formed when PVAm reacts with CO 2 . Since only the PVAm units are ionized upon reaction with CO 2 , with the PNVf units remaining neutral, the density of these ionic effects increased as PVAm content increased, leading to increased resistance to gas permeation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Direct Functionalization of Established 3D-Printed Aza-Michael Liquid Crystal Elastomers with Donor–Acceptor Stenhouse Adducts

Extrusion 3D printing has advanced the manufacturing of complex liquid crystal elastomer (LCE) architectures. In parallel, donor–acceptor Stenhouse adducts (DASAs), a class of white-light-responsive photoswitches, have enabled both photochemical and photothermal LCE actuation. However, DASA–LCEs have yet to be extruded and 3D-printed. Two key challenges exist: DASA’s inherent sensitivity to heat and radicals can lead to degradation during ink preparation and printing, and small changes in the concentration of the added DASA component impact the properties of the extrudable ink, requiring reoptimization of well-established 3D-printing protocols. To overcome these challenges, we present a post-printing functionalization strategy that circumvents these limitations. Residual secondary amines, inherent to inks synthesized via standard aza-Michael addition, serve as active sites for covalent attachment of DASA photoresponsive groups following printing and cross-linking. Our method means that DASAs can be directly grafted onto 3D-printed aza-Michael LCEs without modifying the ink formulation or processing. The resulting DASA–LCEs exhibit wavelength tunability within the visible range and a variety of photothermal and photochemical responses. The post-functionalization can occur within 2 min and enables spatial control of the DASA concentration, producing films with tunable color gradients and locally varied photothermal and photochemical responses under visible light. In conclusion, this approach enables the rapid fabrication of DASA-based light-responsive LCEs using established ink formulations with the potential for the design of complex 3D architectures.

3D printing↗
DOE OSTI2021

Catalytic Light Alkanes Conversion through Anaerobic Ammodehydrogenation

Catalytic transformation of light alkanes could have considerable practical value, yet remains one of the most challenging areas in catalysis research due to the inertness of the C–H bond. Here, we proposed an efficient ammodehydrogenation (ADeH) catalytic system for the direct C–N linkage between light alkanes and ammonia for CH 3 CN and H 2 (CO x free) production. This breakthrough is achieved over bifunctional metal-modified HZSM-5 catalysts, through the tandem dehydrogenation–amination–dehydrogenation mechanism. We show that ethane ADeH over the Pt/HZSM-5 catalyst can be realized under atmospheric pressure at temperatures as low as 350 °C. The specific rate of CH 3 CN is ~60 μmol/(g min), and the selectivity is up to 99% under such mild conditions. The yield of CH 3 CN increases with increasing temperature; however, the selectivity decreases due to the formation of HCN, C 2 H 4 , and CH 4 . Additionally, the Pt/HZSM-5 catalyst is coke-resistant during the ADeH owing to the strong interaction between NH 3 and the acid sites of the catalyst. So, we anticipate that the proposed ADeH could be extended for the transformation of various n/iso-alkanes with tunable selectivity to alkene and nitriles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗