Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AGE ESTIMATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Cratering Rates in the Outer Solar System

We use several independent constraints on the number of ecliptic comets (aka JFCs) to determine impact cratering rates from Jupiter to Pluto. Long period comets and asteroids are currently unimportant on most worlds at most sizes. The size- number distribution of comets smaller than 20 km is inferred from size-number distributions of impact craters on Europa, Ganymede, and Triton; while the size- number distribution of comets bigger than 50 km is equated to the size-number distribution of Kuiper Belt Objects. The gap is bridged by interpolation. It is notable that small craters on Jupiter's moons indicate a pronounced paucity of small impactors, while small craters on Triton imply a collisional population rich in small bodies. However it is unclear whether the craters on Triton are of heliocentric or planetocentric origin. We therefore consider two cases for Saturn and beyond: a Case A in which the size-number distribution is like that inferred at Jupiter, and a Case B in which small objects obey a more nearly collisional distribution. Known craters on Saturnian and Uranian satellites are consistent with either Case, although surface ages are much younger in Case B, especially at Saturn and Uranus. At Neptune and especially at Saturn our cratering rates are much higher than rates estimated by Shoemaker and colleagues, presumably because Shoemaker's estimates mostly predate discovery of the Kuiper Belt. We also estimate collisional disruption rates of moons and compare these to estimates in the literature .

Zahnle, K.↗
NASA NTRS2011

A Chandra X-Ray Survey of Ejecta in the Cassiopeia A Supernova Remnant

We present a survey of the X-ray emitting ejecta in the Cassiopeia A supernova remnant based on an extensive analysis of over 6000 spectral regions extracted on 2.5-10" angular scales using the Chandra 1 Ms observation. We interpret these results in the context of hydrodynamical models for the evolution of the remnant. The distributions of fitted temperature and ionization age are highly peaked and suggest that the ejecta were subjected to multiple secondary shocks. Based on the fitted emission measure and element abundances, and an estimate of the emitting volume, we derive masses for the X-ray emitting ejecta as well as showing the distribution of the mass of various elements over the remnant. The total shocked Fe mass appears to be roughly 0.14 Solar Mass, which accounts for nearly all of the mass expected in Fe ejecta. We find two populations of Fe ejecta, that associated with normal Si-burning and that associated with alpha-rich freeze-out, with a mass ratio of approximately 2:1. Surprisingly, essentially all of this Fe (both components) is well outside the central regions of the SNR, presumably having been ejected by hydrodynamic instabilities during the explosion. We discuss this, and its implications for the neutron star kick.

Hwang, Una↗
NASA NTRS2013

Constraints on the Composition and Evolution of the Lunar Crust from Meteorite NWA 3163

The lunar meteorite NWA 3163 (paired with NWA 4881, 4483) is a ferroan, feldspathic granulitic breccia characterized by pigeonite, augite, olivine, maskelynite and accessory Tichromite, ilmenite and troilite. Bulk rock geochemical signatures indicate the lack of a KREEP- derived component (Eu/Eu* = 3.47), consistent with previously studied lunar granulites and anorthosites. Bulk rock chondrite-normalized signatures are however distinct from the anorthosites and granulites sampled by Apollo missions and are relatively REE-depleted. In-situ analyses of maskelynite reveal little variation in anorthite content (average An% is 96.9 +/- 1.6, 2 sigma). Olivine is relatively ferroan and exhibits very little variation in forsterite content with mean Fo% of 57.7 +/- 2.0 (2 sigma). The majority of pyroxene is low-Ca pigeonite (En57Fs33Wo10). Augite (En46Fs21Wo33) is less common, comprising approximately 10% of analyzed pyroxene. Two pyroxene thermometry on co-existing orthopyroxene and augite yield an equilibrium temperature of 1070C which is in reasonable agreement with temperatures of 1096C estimated from pigeonite compositions. Rb-Sr isotopic systematics of separated fractions yield an average measured Sr-87/Sr-87 of 0.699282+/-0.000007 (2 sigma). Sr model ages are calculated using a modern day Sr-87/Sr-86 Basaltic Achondrite Best Initial (BABI) value of 0.70475, from an initial BABI value Sr-87/Sr-86 of 0.69891 and a corresponding Rb-87/Sr-97 of 0.08716. The Sr model Thermomechanical analysis (TMA) age, which represents the time of separation of a melt from a source reservoir having chondritic evolution, is 4.56+/-0.1 Ga. A Sr model T(sub RD) age, which is a Rb depletion age and assumes no contribution from Rb in the sample in the calculation, yields 4.34+/-0.1 Ga (i.e. a minimum age). The Ar-Ar dating of paired meteorite NWA 4881 reveals an age of c. 2 Ga, likely representing the last thermal event this meteorite experienced. An older Ar-40/Ar-39 age of c. 3.5 Ga may record the thermal event which produced the granulitic texture. Additional chronological constraints will be provided by Sm-Nd systematics. Ferroan Anorthosites like NWA 3163 have been interpreted to represent direct lunar magma ocean (LMO) crystallization products. If this is the case, trace element concentrations in NWA 3163 primary mineral phases should be in equilibrium with residual LMO liquids present during crystallization of those phases. Results from petrogenetic modeling suggest that the NWA 3163 protolith did not form from crystallization of an initially LREE depleted LMO but rather require an initially chondritic LMO with early garnet crystallization. Furthermore, a two-stage crystallization model where plagioclase crystalized prior to pyroxene (93% vs. 99.5% of LMO crystallization) is implied.

McLeod, C. L.↗
DOE OSTI2019

Comprehensive analysis of technical efficiency of business establishments in Santa Barbara County: Evaluation of spatial and aspatial stochastic frontier models

One of the main objectives of land-use and transport models is to accurately describe the organization and composition of the regional economy. However, these models currently lack the integration of competitiveness and performance of the regional economy, which in-turn is dependent on performance and efficiency of business establishments in the region. In this study, we present a framework that integrates the aspects of economic efficiency of business establishments within the context of land-use and transport models. For this purpose, we comprehensively assess the impacts of both internal and external attributes of business establishment on its efficiency. In this process, we specifically focus on aspects of incorporating locational characteristics using two frameworks - (a) measuring locational attributes using link-based multiple centrality indicators (L-MCI) and (b) measuring neighborhood effects of business establishments through spatial proximity that account for co-location and competition. We make use of the stochastic frontier modeling framework to investigate the factors impacting business establishment-level output measured as sales per unit area. Specifically, the aspatial stochastic frontier (ASF) model incorporates L-MCI measures as covariates and the spatial stochastic frontier (SSF) model incorporates neighborhood effects of business establishments through network distance measured using the roadway network for Santa Barbara County.Overall, the empirical results suggest that there exist significant inefficiencies across all business establishment types that are mainly impacted by internal attributes of the business. For example, larger and older business establishments are more efficient than business establishments that are smaller in size and younger in age. Furthermore, the results also suggest that locational impacts are better captured using the ASF specification when compared with SSF specification. For instance, the spatial correlation estimate (from SSF) although statistically significant, is very weak. Thereby, indicating a lack of spatial structure in technical efficiency of businesses manifested in the form of co-location and competition. In contrast, the ASF model captures spatial structure of technical efficiency thoroughly with inclusion of the L-MCI measures. This indicates that L-MCI measures have varying levels of impact on efficiency (positive or negative) depending on its relative location in the region. For instance, retail trade businesses have higher levels of revenue (or sales per unit area) when located along links in a grid-network like structure e.g. downtown areas. Additionally, businesses in professional services have no impact on their efficiency based on the configuration and structure of the regional transportation network. However, results from both specifications indicate that there exist major benefits on efficiency of business establishments from local competition for retail trade and healthcare services.

Ravulaparthy, Srinath↗
DOE OSTI2014

The impact of heatwaves on workers' health and safety in Adelaide, South Australia

This study aims to investigate the impact of heatwaves on worker's health and safety; to identify workers at higher risk of prevalent illnesses and injuries due to heatwaves; and to provide evidence for policy-makers and service providers. South Australian workers' compensation claims data for 2001–2010 were transformed into time series format, merged with meteorological data and analysed using generalized estimating equation (GEE) models. For total injury claims there was no significant difference detected between heatwave and non-heatwave periods. However, for outdoor industries, daily claims increased significantly by 6.2% during heatwaves. Over-represented in hot weather were male labourers and tradespersons aged ≥55 years, and those employed in ‘agriculture, forestry and fishing’ and ‘electricity, gas and water’. Occupational burns, wounds, lacerations, and amputations as well as heat illnesses were significantly associated with heatwaves. Similarly, moving objects, contact with chemicals, and injuries related to environmental factors increased significantly during heatwaves, especially among middle-aged and older male workers. With the predicted increase of extremely hot weather, there is a need for relevant adaptation and prevention measures at both practice and policy levels for vulnerable work groups. - Highlights: • We investigate the impacts of heatwaves on workers' health and safety. • We identify workers at higher risk of illnesses and injuries during heatwaves. • The differences between two heatwave definitions on effect estimates are compared. • Daily injury claims for outdoor industries increased by 6.2% during heatwaves. • Relevant heat prevention measures are required for vulnerable workers.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1972

Apollo 14 mineral ages and the thermal history of the Fra Mauro formation.

The thermal inertia of the Fra Mauro formation limits its rate of cooling. The calculations of Jaeger (1961) for the cooling of an extrusive sheet are used to estimate the time required for a central temperature drop of 10%. This time is found to be about 45 years. For a 90% temperature drop, the time is about 200 years. Analytical methods used in the investigations are discussed together with the diffusion of Rb and Sr within lunar basalt. Isochron diagrams for various minerals are presented.

Compston, W.↗
DOE OSTI2014

VISION Model Description and User's Guide: Model Used to Estimate the Impacts of Highway Vehicle Technologies and Fuels on Energy Use and Carbon Emissions to 2100

The VISION model has been developed by the US Department of Energy (DOE) to provide estimates of the potential energy use, oil use, and carbon emission impacts to the year 2100 of advanced light- and heavy-duty highway vehicle technologies and alternative fuels. DOE supports research of advanced transportation technologies (including fuels) and is frequently asked to provide estimates of the potential impacts of successful market penetration of these technologies, sometimes on a relatively-quick turnaround basis. VISION is a spreadsheet model that was created in Microsoft Excel® that can be used to respond rapidly to quick-turnaround requests, as well as for longer-term analyses. It uses vehicle survival and age-dependent usage characteristics to project total light- and heavy-truck stock, total vehicle miles traveled (VMT), and total energy use by technology and fuel type by year, given market penetration and vehicle energy efficiency assumptions developed exogenously. Total carbon emissions for on-highway vehicles by year are also estimated because life-cycle carbon coefficients for various fuels are included in VISION. VISION is not a substitute for the transportation component of the US Energy Information Administration’s (EIA’s) National Energy Modeling System (NEMS). NEMS incorporates a consumer choice model to project market penetration of advanced vehicles and alternative fuels. The projections are made within the context of the entire US economy. However, the NEMS model requires more time to execute and only makes projections to 2040. VISION complements NEMS with its relative ease of use and by extending the time frame of potential analysis beyond 2040. VISION has been used for a wide variety of purposes. For illustration, we have listed some of its most recent and current uses in Table 1. Figures 1 through 4 illustrate the results of some of those runs. These graphs are not actual model outputs, but they are based on model results. Aside from these, the National Petroleum Council and National Academies used VISION in their recent scenario studies. The original VISION model description and user guide were written in 2004 and 2006, respectively. Since then, the VISION model has been upgraded with new features and functions. Based on the previous two documents, this report describes the 2013 version including all of the new features that have been added since 2006. The main body of this report describes VISION’s methodology and data sources. The methodology and data sources used in the light- and heavy-vehicle portions of the model are discussed separately. Some suggestions for future improvements to the model are made.

Zhou, Yan↗
DOE OSTI2024

Leveraging Hydropower Multi-Sensor Data for Inference and Age-Informed Modeling

Increased demand of operational flexibility such as faster ramp up/down in generation, and more frequent start/stops are putting hydropower plants and their associated components in unprecedented stress. Consequently, these plants are at the high risk of extended and more frequent outage to accommodate unscheduled, and unexpected maintenance. Therefore, hydropower plants are in critical need of data driven and age-informed analysis for their regular and unscheduled operation. Yet not all hydropower plants are exhaustively equipped with sensors and/or measurement streams for their respective components – demanding solutions on how to detect, identify, and locate the cause of any event from the unobservable. Idaho National Laboratory (INL) analyzed the anonymized measurements and event records from the Hydropower Research Institute (HRI) to address this issue, as part of the Water Power Technologies Office (WPTO) funded one year multi-lab project. First, we investigated how time series of multiple sensor measurements can be leveraged to identify an event “root cause” as well as to develop an inference (i.e., estimate the unobservable) problem. INL also investigated how individual hydropower components’ reaction or response times vary across the pre-event, during event, and post-event conditions – enabling the hydropower dynamic models to be age-informed. Finally, the impact of clustering multi-sensor time series on short-term vibration prediction is analyzed. INL will present key findings from these analyses and recommend next steps for stakeholder adoption.

13 HYDRO ENERGY↗
DOE OSTI2023

Analysis of degradation products in thermally treated TATB

Delineating the chemical composition of TATB (1,3,5-triamino-2,4,6-trinitrobenzene) residues produced from the exposure to abnormal thermal environments should lead to a better understanding of the decomposition paths. Identifying and quantifying each compound in thermally produced residues, monitors which compounds are degrading or forming along the decomposition route, as well as providing input for the kinetic models of those pathways. Here, in this paper, we report the methodology of isolating, identifying, and where possible, quantifying soluble compounds present in solid residues of thermally treated TATB (330 °C for tens of minutes). Samples were extracted with DMSO, separated using chromatography, and quantified using their absorption at 354 nm. Identification of unknown compounds was accomplished using high resolution mass spectrometry. TATB, F1 (diamino-dinitro-benzofurazan), HO-TATB (2,4,6-triamino-1-hydroxyl-3,5-dinitrobenzene), and T4A (1-chloro-3,5-dinitro-2,4,6-triaminobenzene) were trace compounds detected in the unreacted TATB. Ten more compounds that formed in the residues were structurally identified including F2 (amino-nitro-difurazan). Several more compounds were observed but not completely identified. We propose possible structures for the unknowns. Of the compounds formed, F1 was the most abundant compound reaching 4.5 % by weight of the degraded solid sample. Other degradation compounds were estimated to sum to trace levels, well below 1 %. Most compounds were new, having not been detected and identified in previous studies of production grade and thermally aged TATB. Many compounds only reached detectable concentrations after several min of thermal exposure.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Radioembolization Super Survivors: Extended Survival in Non-operative Hepatocellular Carcinoma

PurposeTo identify baseline characteristics and long-term prognostic factors in non-transplant patients with unresectable hepatocellular carcinoma (HCC) who had prolonged survival after treatment with yttrium-90 radioembolization (Y90).Materials and MethodsSixty-seven “Super Survivors” (defined as ≥ 3-year survival after Y90) were identified within our 1000-patient Y90 database (2003–2017). Baseline imaging and follow-up occurred at 1 month and every 3 months thereafter. Overall survival (OS) was calculated with Kaplan–Meier estimates with log-rank test in subgroups: Child–Pugh (CP) score, distribution of disease, portal vein thrombus (PVT), and technique (segmental vs lobar Y90).Results Median age 69.5 years (range 45–94 years); 69% male; 60% solitary HCC; 79% unilobar disease; 12% PVT; 10% ascites; Barcelona Clinic Liver Cancer Stage A—54%/B—28%/C—16%/D—2%; CP A—70%/B—28%/C—2%. Longest baseline tumor diameter was 5.4 ± 4.0 cm (mean ± SD). All patients had an imaging response (either partial or complete response). Median OS was 67.5 months (95% CI 55.2–82.5). CP score and main PVT stratified median OS (p = 0.0007 and p = 0.0187, respectively). Beyond 3 years, segmental versus lobar Y90 was associated with improved OS with a median OS of 80.2 versus 46.7 months, respectively (p = 0.0024). Dosing > 200 Gy was not a significant predictor of improved OS.ConclusionsSuper Survivors spanning the BCLC staging system maintained durable OS after radioembolization that was stratified by the extent of underlying liver disease. The common variable among all patients was an imaging response. Segmental versus lobar Y90 may have a long-term associated OS benefit.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2017

The production rate of cosmogenic deuterium at the Moon's surface

The hydrogen (D/H) isotope ratio is a key tracer for the source of planetary water. However, secondary processes such as solar wind implantation and cosmic ray induced spallation reactions have modified the primordial D/H signature of ‘water’ in all rocks and soils recovered on the Moon. We re-evaluate the production rate of cosmogenic deuterium (D) at the Moon's surface through ion microprobe analyses of hydrogen isotopes in olivines from eight Apollo 12 and 15 mare basalts. Furthermore, these in situ measurements are complemented by CO2 laser extraction-static mass spectrometry analyses of cosmogenic noble gas nuclides ( 3 He, 21 Ne, 38 Ar). Cosmic ray exposure (CRE) ages of the mare basalts, derived from their cosmogenic 21Ne content, range from 60 to 422 Ma. These CRE ages are 35% higher, on average, than the published values for the same samples. The amount of D detected in the olivines increases linearly with increasing CRE ages, consistent with a production rate of (2.17±0.11)×10 -12 mol(g rock) -1 Ma -1 . This value is more than twice as high as previous estimates for the production of D by galactic cosmic rays, indicating that for water-poor lunar samples, i.e., samples with water concentrations ≤50 ppm, corrected D/H ratios have been severely overestimated.

58 GEOSCIENCES↗
DOE OSTI2016

Quantitative measurement for the microstructural parameters of nano-precipitates in Al-Mg-Si-Cu alloys

Size, number density and volume fraction of nano-precipitates are important microstructural parameters controlling the strengthening of materials. In this work a widely accessible, convenient, moderately time efficient method with acceptable accuracy and precision has been provided for measurement of volume fraction of nano-precipitates in crystalline materials. The method is based on the traditional but highly accurate technique of measuring foil thickness via convergent beam electron diffraction. A new equation is proposed and verified with the aid of 3-dimensional atom probe (3DAP) analysis, to compensate for the additional error resulted from the hardly distinguishable contrast of too short incomplete precipitates cut by the foil surface. The method can be performed on a regular foil specimen with a modern LaB{sub 6} or field-emission-gun transmission electron microscope. Precisions around ± 16% have been obtained for precipitate volume fractions of needle-like β″/C and Q precipitates in an aged Al-Mg-Si-Cu alloy. The measured number density is close to that directly obtained using 3DAP analysis by a misfit of 4.5%, and the estimated precision for number density measurement is about ± 11%. The limitations of the method are also discussed. - Highlights: •A facile method for measuring volume fraction of nano-precipitates based on CBED •An equation to compensate for small invisible precipitates, with 3DAP verification •Precisions around ± 16% for volume fraction and ± 11% for number density.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Completion of lunar magma ocean solidification at 4.43 Ga

Crystallization of the lunar magma ocean yielded a chemically unique liquid residuum named KREEP. This component is expressed as a large patch on the near side of the Moon and a possible smaller patch in the northwest portion of the Moon’s South Pole-Aitken basin on the far side. Thermal models estimate that the crystallization of the lunar magma ocean (LMO) could have spanned from 10 and 200 My, while studies of radioactive decay systems have yielded inconsistent ages for the completion of LMO crystallization covering over 160 My. Here, we show that the Moon achieved >99% crystallization at 4,429 ± 76 Ma, indicating a lunar formation age of ~4,450 Ma or possibly older. Using the 176 Lu– 176 Hf decay system (t 1/2 = 37 Gy), we found that the initial 176 Hf/ 177 Hf ratios of lunar zircons with varied U–Pb ages are consistent with their crystallization from a KREEP-rich reservoir with a consistently low 176 Lu/ 177 Hf ratio of 0.0167 that emerged ~140 My after solar system formation. The previously proposed younger model age of ~4.33 Ga for the source of mare basalts (240 My after solar system formation) might reflect the timing of a large impact. Our results demonstrate that lunar magma ocean crystallization took place while the Moon was still battered by planetary embryos and planetesimals leftover from the main stage of planetary accretion. The study of Lu–Hf model ages for samples brought back from the South Pole-Aitken basin will help to assess the lateral continuity of KREEP and further understand its significance in the early history of the Moon.

Science & Technology - Other Topics↗
DOE OSTI2014

IRAM 30 m large scale survey of {sup 12}CO(2-1) and {sup 13}CO(2-1) emission in the Orion molecular cloud

Using the IRAM 30 m telescope, we have surveyed a 1 × 0.°8 part of the Orion molecular cloud in the {sup 12}CO and {sup 13}CO (2-1) lines with a maximal spatial resolution of ∼11'' and spectral resolution of ∼0.4 km s{sup –1}. The cloud appears filamentary, clumpy, and with a complex kinematical structure. We derive an estimated mass of the cloud of 7700 M {sub ☉} (half of which is found in regions with visual extinctions A{sub V} below ∼10) and a dynamical age for the nebula of the order of 0.2 Myr. The energy balance suggests that magnetic fields play an important role in supporting the cloud, at large and small scales. According to our analysis, the turbulent kinetic energy in the molecular gas due to outflows is comparable to turbulent kinetic energy resulting from the interaction of the cloud with the H II region. This latter feedback appears negative, i.e., the triggering of star formation by the H II region is inefficient in Orion. The reduced data as well as additional products such as the column density map are made available online (http://userpages.irap.omp.eu/∼oberne/Olivier{sub B}erne/Data).

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Radiological HEPA Filter 10-year Lifetime Evaluation in Research Facilities

High-efficiency particulate air (HEPA) filters are widely employed by nuclear facilities to remove radiological particulate matter from their effluent exhaust streams. The purpose of this study is to evaluate the relationships between the 10-year HEPA filter lifetime deployment and its other performance indicators. This 10-year-long endeavor to collect and analyze data regarding the service life of HEPA filters at the Pacific Northwest National Laboratory began in 2010. A set of HEPA filters were selected and have been surveyed and analyzed at least annually to verify compliance with permit conditions. The study suggests the frequency of filter replacement should be based on the actual operational requirements, such as fume hood face velocity and/or efficiency test results, instead of on the prescribed filter “age limit” of 10 years from the date of manufacture (e.g., birth date) when operating under dry conditions. The study has now been completed, and over the past decade all the HEPA filters have been replaced, due to either technical issues as listed in this report or the previously recommended filter “age limit” of 10 years as prescribed by the oversight bodies. Experimentally determined failure rates are also determined from the data set and can be used to estimate the chances of HEPA filters surviving 15, 20, or even 30 years.

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2017

Inference of Transmission Network Structure from HIV Phylogenetic Trees

Phylogenetic inference is an attractive means to reconstruct transmission histories and epidemics. However, there is not a perfect correspondence between transmission history and virus phylogeny. Both node height and topological differences may occur, depending on the interaction between within-host evolutionary dynamics and between-host transmission patterns. To investigate these interactions, we added a within-host evolutionary model in epidemiological simulations and examined if the resulting phylogeny could recover different types of contact networks. To further improve realism, we also introduced patient-specific differences in infectivity across disease stages, and on the epidemic level we considered incomplete sampling and the age of the epidemic. Second, we implemented an inference method based on approximate Bayesian computation (ABC) to discriminate among three well-studied network models and jointly estimate both network parameters and key epidemiological quantities such as the infection rate. Our ABC framework used both topological and distance-based tree statistics for comparison between simulated and observed trees. Overall, our simulations showed that a virus time-scaled phylogeny (genealogy) may be substantially different from the between-host transmission tree. This has important implications for the interpretation of what a phylogeny reveals about the underlying epidemic contact network. In particular, we found that while the within-host evolutionary process obscures the transmission tree, the diversification process and infectivity dynamics also add discriminatory power to differentiate between different types of contact networks. We also found that the possibility to differentiate contact networks depends on how far an epidemic has progressed, where distance-based tree statistics have more power early in an epidemic. Finally, we applied our ABC inference on two different outbreaks from the Swedish HIV-1 epidemic.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2016

REVISITING THE MICROLENSING EVENT OGLE 2012-BLG-0026: A SOLAR MASS STAR WITH TWO COLD GIANT PLANETS

Two cold gas giant planets orbiting a G-type main-sequence star in the galactic disk were previously discovered in the high-magnification microlensing event OGLE-2012-BLG-0026. Here, we present revised host star flux measurements and a refined model for the two-planet system using additional light curve data. We performed high angular resolution adaptive optics imaging with the Keck and Subaru telescopes at two epochs while the source star was still amplified. We detected the lens flux, H = 16.39 ± 0.08. The lens, a disk star, is brighter than predicted from the modeling in the original study. We revisited the light curve modeling using additional photometric data from the B and C telescope in New Zealand and CTIO 1.3 m H -band light curve. We then include the Keck and Subaru adaptive optic observation constraints. The system is composed of a ∼4–9 Gyr lens star of M {sub lens} = 1.06 ± 0.05 M {sub ⊙} at a distance of D {sub lens} = 4.0 ± 0.3 kpc, orbited by two giant planets of 0.145 ± 0.008 M {sub Jup} and 0.86 ± 0.06 M {sub Jup}, with projected separations of 4.0 ± 0.5 au and 4.8 ± 0.7 au, respectively. Because the lens is brighter than the source star by 16 ± 8% in H, with no other blend within one arcsec, it will be possible to estimate its metallicity using subsequent IR spectroscopy with 8–10 m class telescopes. By adding a constraint on the metallicity it will be possible to refine the age of the system.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1992

An Ultraviolet Imaging Telescope study of the globular cluster M79 (NGC 1904)

The Ultraviolet Imaging Telescope detects about 100 blue and extremely blue horizontal-branch (HB) stars in M79. Comparison of the ultraviolet color-magnitude diagram of M79 with stellar interior models shows that the distribution of total masses of the detected stars along with the zero-age HB includes the range of 0.495-0.62 solar mass, corresponding to envelope masses 0.01-0.13 solar mass. The total number of HB stars in M79 is estimated at 220 +/- 10. Also detected are two hot stars brighter than the horizontal branch by at least 1.5 mag at 1520 A. One of these stars (UIT 1) appears to be descending in luminosity along a pre-white dwarf track. The other (UIT 2) is most likely a post-HB star evolving toward the asymptotic giant branch.

Hill, Robert S.↗