Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “water potential”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Towards low-carbon low-energy concrete alternatives: Life cycle assessment of carbonated cementitious material-based precast panels

Cement is responsible for 22 % of all global CO 2 emissions from industrial processes. Technological innovation for developing and deploying of alternative materials will be required to decarbonize the cement industry. Carbonated cementitious materials (CCMs) are building materials that rely on carbon mineralization for their strength. A process-based cradle-to-gate life cycle assessment (LCA) was conducted to evaluate the global warming potential (GWP), cumulative energy demand, and water consumption of a lab-scale CCM-based precast panel compared to a conventional precast concrete panel. Since the CCM process is currently a lab-scale early-stage process, the CCM panel showed higher environmental impacts compared to the conventional panel. However, scenario analyses include mature production process scenarios. In conclusion, a sensitivity analysis revealed that the GWP of CCM can be lowered to below that of the conventional panel using polymers, fillers, low-carbon electricity sources, and optimized carbonation parameters.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Techno-economic assessment of distributed wellhead RO water treatment for nitrate removal and salinity reduction: A field study in small disadvantaged communities

Techno-economic analysis of distributed wellhead water treatment and desalination (DWTD) systems was carried out based on a three-year field study in three small, disadvantaged communities (DACs) to evaluate the reliability and affordability of upgrading their impaired well water. The local water supplies of the three study DACs, located in Salinas Valley, California, were contaminated with nitrate at levels (~ 12–87 mg/L NO$^{-}_{3}$ - N) ) above the California maximum contaminant level (MCL) of 10 mg/L NO$^{-}_{3}$ - N , and had elevated water salinity (~600–1,600 mg/L total dissolved solids(TDS)) above its secondary MCL (SMCL) of 500 mg/L TDS. Well water nitrate removal and salinity reduction were accomplished via reverse osmosis (RO) based DWTD systems that operated autonomously, supported by remote monitoring and supervisory cyberinfrastructure. Reliable DWTD operation provided treated water quality, with respect to nitrate and salinity, in the range of 0.5–6.3 mg/L NO$^{-}_{3}$ - N and 57–161 mg/L TDS, respectively, which were well below the respective MCL and SMCL. The levelized cost of water treatment was in the range of ~$$2/m 3 - $$2.9/m 3 which aligns with typical residential water costs in California and in the study region, and monthly residential water costs (39 dollars-74 dollars/residential unit/month) were also within the range in California. The study showcased the DWTD approach as a viable and potentially scalable solution for upgrading impaired local potable water supply of communities lacking centralized water delivery infrastructure. However, streamlined permitting processes and standardized regulatory frameworks are critical to promoting wider adoption and maximizing the socio-economic benefits of the DWT approach. Moreover, DACs are likely to require government subsidies in order to cover the CapEx of DWTD systems in addition to upgrade of site infrastructure.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Liquid Containing Clouds at the North Slope of Alaska Demonstrate Sensitivity to Local Industrial Aerosol Emissions

Abstract Cloud condensation nucleus control alter cloud solar albedo through cloud droplet size. Here, we leverage anthropogenic emissions at the North Slope of Alaska as a natural laboratory to study relationships between aerosols and Arctic liquid‐containing clouds. Averaging 14 years of MODIS observations, we found a reduction in temporally averaged cloud effective radius ( ) of up to 1.0 μm related to localized pollution. Pronounced regional gradients in cloud frequency of occurrence and liquid water path prohibit the detection of potential changes of these variables. Observed changes of alter radiative fluxes and increase cloud‐reflected shortwave radiation by up to 0.8 W m − 2 in the Prudhoe Bay area for the period covered by observations (April–September). Due to the frequent occurrence of liquid‐containing clouds, this implies that enhanced local emissions in Arctic regions can impact climate processes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Impacts of Large-Scale Urbanization and Irrigation on Summer Precipitation in the Mid-Atlantic Region of the United States

This study investigates how urbanization and irrigation in the United States east of the Rocky Mountains affect summer precipitation in the Mid-Atlantic region (MAR) using convection-permitting Weather Research and Forecasting model simulations with/without urbanization or irrigation. In this work, a feature tracking algorithm is used to identify precipitation from mesoscale convective systems (MCSs), isolated deep convection (IDC), and non-convective systems (NC). Overall, urbanization suppresses all three types of precipitation in the MAR by reducing water vapor content and convective available potential energy, while irrigation enhances IDC and NC precipitation but suppresses MCS precipitation. Examination of the MCS and IDC initiation locations indicates that irrigation suppresses MAR precipitation that is produced by MCSs initiated in the Great Plains and Midwest (GP) but enhances MAR precipitation from MCSs initiated locally within the region. Irrigation induces a mid-level cyclonic circulation anomaly centering in the Southeast, hindering the eastward propagation and development of MCSs from the GP.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Effects of Pollen on Hydrometeors and Precipitation in a Convective System

Anemophilous (wind-driven) pollen is one type of primary biological aerosol particle, which can rupture under high humidity conditions and form smaller sub-pollen particles (SPPs). Both pollen and SPPs can reach the upper troposphere under convective conditions, acting as cloud condensation nuclei (CCN) and ice nucleating particles (INPs), thus influencing cloud formation and precipitation. However, the impacts of these biological aerosols on cold cloud formation and local climate remain unclear as there are large uncertainties on their emission flux and ice nucleating abilities. Here, we incorporate pollen emission and rupture processes in the Weather Research and Forecasting Model with Chemistry (WRF-Chem) simulations and update the Morrison microphysics scheme within WRF-Chem using aerosol-aware INP parameterizations to account for pollen in addition to other anthropogenic and biogenic aerosol. INP parameterizations for pollen and SPP are derived from laboratory experiments. When including pollen rupture rates as observed in a series of chamber studies, SPP concentrations increase, leading to an increase of cloud ice and water by up to 50% and potentially extending the duration of the convective system. Among all simulated hydrometeors, graupel and raindrops exhibit the largest enhancements from the inclusion of SPPs, with intensifying precipitation at the backside of the convective system and a greater spatial extent. Sensitivity simulations indicate that SPPs have a greater effect on cloud microphysical processes than whole pollen grains, and further observational evidence is needed to constrain these processes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

AI Improves the Accuracy, Reliability, and Economic Value of Continental‐Scale Flood Predictions

Accurate flood early warnings are critical to minimize damage and loss of life. Current large‐scale operational forecasting systems, however, have limited accuracy, description of uncertainty, and computational efficiency. While Artificial intelligence (AI) can address these limitations in principle, the accuracy and reliability of AI forecasts have thus far proven insufficient. Here we present a novel hybrid framework that integrates AI‐based machinery termed Errorcastnet (ECN) with the National Water Model (NWM) to showcase the potential of ensemble AI flood forecasts over the contiguous U.S. ECN boosts prediction accuracy four‐ to six‐fold across lead times of 1–10 days, while providing uncertainty quantification. It also outperforms Google's state‐of‐the‐art global AI model. ECN‐based forecasts offer superior economic value (up to four‐fold) for decision‐making as compared to those from NWM alone. ECN performs well in varied ecoregions, physiography, and land management conditions. The framework is computationally efficient, enabling national‐scale ensemble forecasts in minutes.

artificial intelligence↗
DOE OSTI2024

The influence of exploration activities of a potential lithium mine to the environment in Western Serbia

The proposed exploitation of the Jadar Valley lithium/borate deposit in Serbia, by the Rio Tinto Corporation, indicates that it would become large-scale processing of boron- and lithium-containing ore. It would be one of the world’s very first lithium mines in populated and agricultural area. The company claims that the envisioned mining will be in accordance with environmental protection requirements. The Jadar Valley deposits have been claimed to cover 90% of Europe’s current lithium needs. Yet, local opposition to the mining has arisen due to potential devastating impacts on groundwater, soil, water usage, biodiversity loss, and waste accumulation. Research drilling by the mining company has already produced environmental damage, with mine water containing high levels of boron leaking from exploratory wells and causing crops to dry out. Furthermore, our investigations reveal substantially elevated downstream concentrations of boron, arsenic, and lithium in nearby rivers as compared to upstream regions. Additionally, here we show that soil samples exhibit repeated breaches of remediation limit values with environmental consequences on both surface and underground waters. With the opening of the mine, problems will be multiplied by the tailings pond, mine wastewater, noise, air pollution, and light pollution, endangering the lives of numerous local communities and destroying their freshwater sources, agricultural land, livestock, and assets.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Recent progress in molecular engineering to tailor organic–inorganic interfaces in composite membranes

Organic-inorganic composite membranes are of great interest in modern water treatment processes because they offer potentially superior separation efficiency and advanced funtionality by integrating the properties of polymers and inorganics. The biggest challenge in the fabrication and applications of organic-inorganic composite membranes is the incompatibility of organic-inorganic interfaces. In this minireview, we summarize the most recent advances in molecular engineering to tailor the properties of interfaces in composite membranes. Three typical models (i.e. mixed matrix model, interface composite model, and dual-layer composite model) are presented to demonstrate how to regulate these interfaces via molecular engineering and how the interfacial properties ultimately affect the membrane performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Electrochemistry of PUREX: R is for Reduction and Ion Transfer

The PUREX (Plutonium, Uranium, Reduction, EXtraction) process is the foundation of all industrial activities that involve the recycling of plutonium and uranium from used nuclear fuel. With over 70 years of research, engineering, and operations, it can be argued that little opportunity is left for further discovery and new fundamental understandings regarding PUREX, in general, and tri-n-butyl phosphate (TBP), in particular. Through use of an advanced electroanalytical approach, molecular-level insights regarding the back-extraction of Pu(IV) by reductive separation is reported. Studies of model PUREX systems, with lanthanide ions extracted into 20 % TBP in n-dodecane, are used to demonstrate the approach. These studies reveal knowledge pertinent to mass transfer aspects of the biphasic reductive stripping reaction central to the separation of U and Pu in PUREX. Two lanthanide ions—Ce(IV) and Yb(III)—were extracted from their concentrated solutions in aqueous 3 M HNO 3 to expressly provide electrically conducting third phases to facilitate electrochemical data acquisition. To simplify the diabolically-complicated reductive separation aspects of PUREX, the controlled polarization of electrode surfaces was used to reduce Ce(IV) and Yb(III) in place of chemical reductants. Electroanalyses of the biphasic systems with Ce(IV) and Yb(III) using three-phase electrode differential pulse voltammetry demonstrate the effects of mass transfer across water-oil interfaces on the electrode potentials for the reduction to Ce(III) and Yb(II). These reductions trigger nitrate transfer out of the oil phase for Ce and proton transfer into the organic phase for Yb. This is in correlation with the transfer of the charge-neutral ion pairs Ce·3NO 3 and Yb·2NO 3 out of the oil phases. Here, the differences in ion transfer steps reflect significant variations in the equilibrium speciation of multinuclear Ce(IV) and mononuclear Yb(III) solvates of TBP in the oil phases and the loading of the organic phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Multielectrode electrochemical cell for in situ structural characterization of amorphous thin-film catalysts using high-energy X-ray scattering

A multielectrode-based electrochemical cell allows the structural characterization of an amorphous thin-film water oxidation catalyst under various electrochemical potentials using high-energy X-ray scattering and atomic pair distribution function (PDF) techniques. A multielectrode with five electrodes provides a sufficiently low background signal to enable high-energy X-ray scattering (HEXS) measurements and amplifies the extremely low HEXS signals from samples for high-resolution PDF analysis of in situ data from thin-film catalysts. Glassy carbon (GC) creates a relatively low intensity HEXS pattern and is used as a working electrode. Instead of a three-dimensional (3D) porous electrode architecture, the flat geometry of the electrode enables various deposition techniques to be used for the preparation of a highly conductive metal oxide layer. PDF analysis demonstrates high spatial resolution for a 230 nm thick amorphous iridium oxide film deposited on two roughened 60 µm thick GC electrodes. The PDF analysis resolves the domain size and distinguishes changes in fine structure which are directly correlated with the structure and function of the catalysts. In conclusion, the results bring the opportunity to analyze the structure of nanometre-scale amorphous thin-film catalysts in an electrolyte-compatible and compact 3D-printed electrochemical cell in a three-electrode configuration.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Degradation Mechanisms in Advanced MEAs for PEM Water Electrolyzers Fabricated by Reactive Spray Deposition Technology

Proton exchange membrane water electrolyzers (PEMWEs) have demonstrated enormous potential as the next generation hydrogen production technology. The main challenges that the state-of-the-art PEMWEs are currently facing are excessive cost and poor durability. Understanding the failure modes in PEMWEs is a key factor for improving their durability, lowering the precious metal loading, and hence cost reduction. Here, reactive spray deposition technology (RSDT) has been used to fabricate a membrane electrode assembly (MEA) with one order of magnitude lower Pt and Ir catalyst loadings (0.2–0.3 mg PGM cm –2 ) in comparison to the precious metal loadings in the stat-of-the-art commercial MEAs (2–3 mg PGM cm –2 ). As fabricated MEA with an active area of 86 cm 2 , has been tested for over 5000 h at steady-state conditions that are typical for an industrial hydrogen production system. Herein, we present and discuss the results from a comprehensive post-test analysis of the MEA of interest. The main degradation mechanisms, governing the performance loss in the RSDT fabricated MEA with ultra-low precious metal loadings, have been identified and discussed in detail. All failure modes are critically compared and the main degradation mechanism with the highest impact on the MEA performance loss among the others is identified.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Data from: "Soil moisture mediates alpine life form and community productivity responses to warming"

This dataset contains values that were used to support conclusions drawn in the publication “Soil moisture mediates alpine life form and community productivity responses to warming”, originally published in 2016 by Winkler et al. All data were collected in the alpine site of the Alpine Treeline Warming Experiment (ATWE), located on Niwot Ridge, in the Front Range of the Colorado Rocky Mountains, USA. The file types in this archive include comma-separated-values (.csv) files, and two types of geospatial files: .kml and shapefiles (.shp). The csv files can be opened by R, Microsoft Excel, or any simple text editor software. The geospatial files can be opened by Google Earth/Google Maps, and the ESRI shapefiles can be opened by geographic information systems softwares that can read shapefiles, including ESRI’s ArcGIS Desktop suite, and QGIS.Climate warming is expected to alter primary production and community composition in alpine systems around the globe. Whether production will increase in response to warming in the absence of additional precipitation remains underexplored. We experimentally warmed an alpine plant community on Niwot Ridge, Colorado to test whether warming increases or decreases productivity of multiple plant life form groups and the entire plant community. We also provided supplemental water to a subset of plots to alleviate potential drying effects of warming. We predicted alpine community above-ground productivity would increase in response to warming only when combined with supplemental water to limit soil drying. We also predicted plant life form groups would vary in their responses and would like buffer changes in community productivity.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

COMPASS-FME Terrestrial Ecosystem Manipulation to Probe the Effects of Storm Treatments (TEMPEST) Experiment Level 1 Sensor Data v1-2

This is the version 1-2 Level 1 (L1) data release for COMPASS-FME environmental sensors located at our Terrestrial Ecosystem Manipulation to Probe the Effects of Storm Treatments (TEMPEST) experimental site. This manipulative, ecosystem-scale TEMPEST experiment addresses the potential for freshwater and estuarine-water disturbance events to alter tree function, species composition, and ecosystem processes in a deciduous coastal forest in MD, USA. The experiment uses a large-unit (2000 m2), un-replicated experimental design, with three 50 m × 40 m plots serving as control, freshwater, and estuarine-water treatments.L1 data are close to raw, but are units-transformed and have out-of-instrument-bounds and out-of-service flags added. Duplicates and missing data are removed but otherwise these data are not filtered, and have not been subject to any additional algorithmic or human QA/QC. Any scientific analyses of L1 data should be performed with care. **This dataset will be updated quarterly with new data for the duration of the project**This dataset includes:- An overall dataset README file that describes the current version, gives citation and contact information, etc.- Site- and year-specific folders, each holding up to 12 CSV (comma separated value) data files for each site and plot in that year.- Metadata files within each site-year folder provide full information on data units, expected ranges, contact information, detailed flood times, as well as a general description of the site.- Environmental sensor types that appear in the data files include weather (ClimaVUE50, CS, RM Young, and LI instruments in the graphs below); soil conditions (TEROS12); soil redox state (Redox); groundwater variables (AquaTROLL200 and AquaTROLL600); open water sondes (Exo); tree sap velocity (Sapflow); and system voltage and state (Datalogger). Data are normally logged every 15 minutes.Please see v1-2 TEMPEST L1 Sensor Package Quick Start.pdf for detailed information on data package structure, temporal coverage, and versioning.The TEMPEST flood events occurred on the following dates. They lasted for ~10 hours each day and delivered ~80,000 gallons to each plot; many data streams are available at 1 or 5 minute frequency during these periods.* Tests: Aug 25 (fresh plot) and Sep 9 (salt plot), 2021* TEMPEST 1: June 22, 2022* TEMPEST 2: June 6-7, 2023* TEMPEST 3: June 11-13, 2024

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

COMPASS-FME Terrestrial Ecosystem Manipulation to Probe the Effects of Storm Treatments (TEMPEST) Experiment Tree Inventory

This is the tree inventory (diameter, species, and live/dead status) data from the Terrestrial Ecosystem Manipulation to Probe the Effects of Storm Treatments (TEMPEST) experimental site. This manipulative, ecosystem-scale TEMPEST experiment is part of the COMPASS-FME (Coastal Observations, Mechanisms, and Predictions Across Systems and Scales: Field Measurements and Experiments; see https://compass.pnnl.gov/FME/COMPASSFME) project. It addresses the potential for freshwater and estuarine-water disturbance events to alter tree function, species composition, and ecosystem processes in a deciduous coastal forest in eastern Maryland, USA. The experiment uses a large-unit (2000 m2), un-replicated experimental design, with three 50 m × 40 m plots serving as control, freshwater, and estuarine-water treatments.This dataset includes:- An overall dataset README file.- The tree inventory data in both "wide" and "long" forms. These contain the same information but are structured differently, with the former more useful for human viewers and the latter more amenable for programmatic analyses.- A key to the species/genus codes used, which follow the U.S. Department of Agriculture's PLANTS schema (https://plants.usda.gov/).- A copy of the R code used to generate the wide- and long-form data files.All files are comma-separated value (CSV) and no special software is required to read them.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

COMPASS-FME Terrestrial Ecosystem Manipulation to Probe the Effects of Storm Treatments (TEMPEST) Experiment Level 1 Sensor Data v2-1

This is the version 2-1 Level 1 (L1) data release for COMPASS-FME environmental sensors located at our Terrestrial Ecosystem Manipulation to Probe the Effects of Storm Treatments (TEMPEST) experimental site. This manipulative, ecosystem-scale TEMPEST experiment addresses the potential for freshwater and estuarine-water disturbance events to alter tree function, species composition, and ecosystem processes in a deciduous coastal forest in MD, USA. The experiment uses a large-unit (2000 m2), un-replicated experimental design, with three 50 m × 40 m plots serving as control, freshwater, and estuarine-water treatments. L1 data are close to raw, but are units-transformed and have out-of-instrument-bounds, out-of-service, and outlier flags added. Duplicates and missing data are removed but otherwise these data are not filtered, and have not been subject to any additional algorithmic or human QA/QC. Any scientific analyses of L1 data should be performed with care. **This dataset will be updated quarterly with new data for the duration of the project** This dataset includes: - An overall dataset README file that describes the current version, gives citation and contact information, etc. - Site- and year-specific folders, each holding variable-specific CSV (comma separated value) data files for each site and plot in that year. - Metadata files within each site-year folder provide full information on data units, expected ranges, contact information, detailed flood times, as well as a general description of the site. - Environmental sensor types that appear in the data files include weather (ClimaVUE50, CS, RM Young, and LI instruments in the graphs below); soil conditions (TEROS12); soil redox state (Redox); groundwater variables (AquaTROLL200 and AquaTROLL600); open water sondes (Exo); tree sap velocity (Sapflow); and system voltage and state (Datalogger). Data are normally logged every 15 minutes. Please see v2-1 TEMPEST L1 Sensor Package Quick Start.pdf for detailed information on data package structure, temporal coverage, and versioning. The TEMPEST flood events occurred on the following dates. They lasted for ~10 hours each day and delivered ~80,000 gallons to each plot; many data streams are available at 1 or 5 minute frequency during these periods. * Tests: Aug 25 (fresh plot) and Sep 9 (salt plot), 2021 * TEMPEST 1: June 22, 2022 * TEMPEST 2: June 6-7, 2023 * TEMPEST 3: June 11-13, 2024 This dataset was updated 2026-03-12: (i) data now go through 2025-12-31 (previous end was 2025-06-30) and (ii) dataset and file names updated to “…v2-1” (previously was “v2-0”).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

CROCUS Tipping Bucket Rain Gauge Data at Argonne National Laboratory Prairie Site

The Tipping Bucket Rain Gauge (TBRG) dataset contains data from both the Nova-Lynx 12 inch TBRG and the Met One 8-inch TBRG. The dataset contains one minute measurements for precipitation accumulation measured in that timeframe from both instruments. Each TBRG was equipped with heaters for all-season measurements. These data are helpful for identifying periods of drought, potential flooding, and general input for water budgets. TBRGs can be used to validate optical rain gauge data and disdrometer data collected during the CROCUS project. Data were collected at the Argonne Testbed for Multiscale Observational Science (ATMOS), a 20-acre prairie site at Argonne National Laboratory in Lemont, Illinois. The data is presented as daily NetCDF (.nc) files, each containing approximately 24 hours of observations. Files follow the naming convention of: the project (CROCUS), location (atmos), instrument name (tbrg), data level (raw, a1), and date (year, month, day). The NetCDF format can be accessed using common scientific software such as Python using xarray, netCDF4 or act-doe.

1-min Precipitation Accumulation↗
DOE OSTI2026

COMPASS-FME Terrestrial Ecosystem Manipulation to Probe the Effects of Storm Treatments (TEMPEST) Experiment Level 2 Sensor Data v2-1

This is the version v2-1 Level 2 (L2) data release for COMPASS-FME environmental sensors located at our Terrestrial Ecosystem Manipulation to Probe the Effects of Storm Treatments (TEMPEST) experimental site. This manipulative, ecosystem-scale TEMPEST experiment addresses the potential for freshwater and estuarine-water disturbance events to alter tree function, species composition, and ecosystem processes in a deciduous coastal forest in MD, USA. The experiment uses a large-unit (2000 m2), un-replicated experimental design, with three 50 m × 40 m plots serving as control, freshwater, and estuarine-water treatments. Level 2 (L2) data consist of sensor observations from the COMPASS-FME synoptic sites, TEMPEST, and DELUGE. Compared to the L1 data, these are more consistent (always 15-minute timestamps for the entire year); better QA/QC’d (out of bounds, out of service, and extreme outlier values are removed); and more complete, with a gap-filled time series available alongside the main observations, and additional derived (calculated) variables. L2 data are intended to be rapidly and easily usable in analyses and simulations. However, algorithmic outlier identification always carries the risk of removing valid data, and Level 1 data may be more suitable for analyses that focus on variability or extreme events. This dataset includes: - An overall dataset README file that describes the current version, gives citation and contact information, etc. - Site- and year-specific folders, each holding variable-specific Parquet (a high performance, space efficient format; see https://parquet.apache.org) data files for each site and plot in that year. - Metadata files within each site-year folder provide full information on data units, expected ranges, contact information, detailed flood times, as well as a general description of the site. - Environmental sensor types that appear in the data files include weather (ClimaVUE50, CS, RM Young, and LI instruments in the graphs below); soil conditions (TEROS12); soil redox state (Redox); groundwater variables (AquaTROLL200 and AquaTROLL600); open water sondes (Exo); tree sap velocity (Sapflow); and system voltage and state (Datalogger). Data are reported every 15 minutes. Please see v2-1 TEMPEST L2 Sensor Package Quick Start.pdf for detailed information on data package structure, temporal coverage, and versioning. Data files are in Apache Parquet, a high performance, space efficient format for tabular data. These files can be read using R's `arrow` package (https://arrow.apache.org/docs/r/), with similar tools available in other languages. The TEMPEST flood events occurred on the following dates. They lasted for ~10 hours each day and delivered ~80,000 gallons to each plot; many data streams are available at 1 or 5 minute frequency during these periods. * Tests: Aug 25 (fresh plot) and Sep 9 (salt plot), 2021 * TEMPEST 1: June 22, 2022 * TEMPEST 2: June 6-7, 2023 * TEMPEST 3: June 11-13, 2024

EARTH SCIENCE > ATMOSPHERE > ATMOSPHERIC TEMPERATU↗
DOE OSTI2026

McGrath Community Energy Planning

The City of McGrath, a remote Alaskan community reliant on diesel fuel, developed a Community Energy Plan through the Energy Technologies Innovation Partnership Project (ETIPP) to address high energy costs, infrastructure vulnerabilities, and long-term sustainability. Guided by community-led priorities and technical assistance from partners including NREL, REAP, and ANTHC, the plan identifies eight focus areas: distribution system upgrades, solar and battery integration, river energy potential, emergency backup power, housing efficiency, water system losses, independent power producer models, and targeted funding strategies. The plan combines local knowledge with technical analysis to chart a path toward a more resilient, affordable, and sustainable energy future for McGrath.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗