Comments on TEC trends
A technology assessment of thermionic energy conversion research and technology is presented.
Morris, J. F.↗
SEARCH · Engineering Papers
Results for “trending”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Measurement of soil moisture trends with airborne scatterometers
The author has identified the following significant results. Cursory examination of the data indicates that the listed row tillage practices at 90 deg to the radar beam are approximately 12.5db higher than other comparable agricultural land. The Seasat radar data show evidence that the high return occurs only at a narrow range in look direction near the 90 deg. Such a high increase in return compared to a 15db range in film response would indicate that rows seen crosswise would saturate optically processed data. This response to row direction will have an adverse effect on monitoring agricultural lands with L band radar systems. Preliminary examination indicates that there is no sensitivity to soil moisture at the 5 deg look angle when using a like-polarized L band system. Some sensitivity was evident at a look angle of 20 deg and only a weak sensitivity was indicated at 40 deg look angle. At both 20 deg and 40 deg there is a significant response to soil moisture and none to row direction. Steep angles or the 5 deg look angle using cross polarized (HB) L band system appear insensitive to row direction and soil moisture.
Blanchard, B. J.↗
Trends in reliability modeling technology for fault tolerant systems
Developments in reliability modeling for large fault tolerant avionic computing systems are presented. Issues of state size and complexity, fault coverage, and practical computation are addressed. A two-fold developmental effort is described based on the structural and fault coverage modeling approaches. A technique which was successfully applied to an 865 state pure death stationary Markov model is presented. Of particular interest is a short computer program which executes very quickly to produce reliability results of a large state space model. This model also incorporates fault coverage states for processor, memory, and bus line replaceable units. A second structural reliability modeling scheme is aimed at solving nonstationary Markov models. This technique provides the tool required for studying the reliability of systems with nonconstant failure rates and includes intermittent/transient faults, electronic hardware which exhibits decreasing failure rates, and hydromechanical devices which typically have wearout failure mechanisms. Several aspects of fault coverage, including modeling and data measurement of intermittent/transient faults and latent faults, are elucidated and illustrated. The CARE II (computer-aided reliability estimation) coverage is presented and shortcomings to be eliminated are discussed.
Bavuso, S. J.↗
A study of trends and techniques for space base electronics
A sputtering system was developed to deposit aluminum and aluminum alloys by the dc sputtering technique. This system is designed for a high level of cleanliness and for monitoring the deposition parameters during film preparation. This system is now ready for studying the deposition and annealing parameters upon double-level metal preparation. A technique recently applied for semiconductor analysis, the finite element method, was studied for use in the computer modeling of two dimensional MOS transistor structures. It was concluded that the method has not been sufficiently well developed for confident use at this time. An algorithm was developed for confident use at this time. An algorithm was developed for implementing a computer study which is based upon the finite difference method. The program which was developed was modified and used to calculate redistribution data for boron and phosphorous which had been predeposited by ion implantation with range and straggle conditions. Data were generated for 111 oriented SOS films with redistribution in N2, dry O2 and steam ambients.
Trotter, J. D.↗
Current jet fuel trends
Data concerning the properties of commercial jet fuels during the period between 1974 and 1979 are discussed. During this period the average aromatics content of fuels increased from 16% to 17.5%. It is evident that the arrival of Alaska North Slope crude in 1977 had a significant impact upon the aromatics content of jet fuel supply at West Coast points with less effect upon the entire United States domestic market. This increase in aromatics has not been accompanied by a corresponding reduction in burning quality as measured by smoke point. There has been a reduction of .6 smoke point on the average. Looking at hydrogen content as a measure of burning quality, the all refinery average calculated hydrogen for 1978 was approximately 13.7%. The relationship between hydrogen content and aromatics content shows a slope of .043% reduction in hydrogen for 1% increase in aromatics.
Campbell, P. P.↗
Data and information requirement trends in remote sensing
Two characteristics of remote sensing - data volume and information volatility - are discussed. Emphasis is placed on the NASA Applications Data Service and Remotely Piloted Vehicle (RPV) television. It is noted that the data volume and information volatility in a given remote sensing system require a careful choice of the point in the end-to-end system at which data compression and/or information extraction take place.
Lynch, T. J.↗
A study of trends and techniques for space base electronics
Furnaces and photolithography related equipment were applied to experiments on double layer metal. The double layer metal activity emphasized wet chemistry techniques. By incorporating the following techniques: (1) ultrasonic etching of the vias; (2) premetal clean using a modified buffered hydrogen fluoride; (3) phosphorus doped vapor; and (4) extended sintering, yields of 98 percent were obtained using the standard test pattern. The two dimensional modeling problems have stemmed from, alternately, instability and too much computation time to achieve convergence.
Trotter, J. D.↗
Trends and techniques for space base electronics
A system was developed for depositing aluminum and aluminum alloys by the D.C. sputtering technique. This system which was designed for a high level of cleanliness and ion monitoring the deposition parameters during film preparation is ready for studying the deposition and annealing parameters upon double level metal preparation. The finite element method was studied for use in the computer modeling of two dimensional MOS transistor structures. An algorithm was developed for implementing a computer study which is based upon the finite difference method. The program was modified and used to calculate redistribution data for boron and phosphorous which had been predeposited by ion implantation with range and straggle conditions typical of those used at MSFC. Data were generated for 111 oriented SOS films with redistribution in N2, dry O2 and steam ambients. Data are given showing both two dimensional effects and the evolution of the junction depth, sheet resistance and integrated dose with redistribution time.
Gassaway, J. D.↗
Materials processing in space: Future technology trends
NASA's materials processing in space- (MPS) program involves both ground and space-based research and looks to frequent and cost effective access to the space environment for necessary progress. The first generation payloads for research are under active design and development. They will be hosted by the Space Shuttle/Spacelab on Earth orbital flights in the early 1980's. hese missions will focus on the acquisition of materials behavior research data, the potential enhancement of Earth based technology, and the implementation of space based processing for specialized, high value materials. Some materials to be studied in these payloads may provide future breakthroughs for stronger alloys, ultrapure glasses, superior electronic components, and new or better chemicals. An operational 25 kW power system is expected to be operational to support sustained, systematic space processing activity beyond shuttle capability for second generation payload systems for SPACELAB and free flyer missions to study solidification and crystal growth and to process metal/alloys, glasses/ceramics, and chemicals and biologicals.
Barter, N. J.↗
A study of trends and techniques for space base electronics
The research facilities of the Mississippi State University devoted to microelectronics are described. The fabrication and processing capabilities, computer aided design, and experimental evaluation capabilities are discussed.
Trotter, J. D.↗
A study of trends and techniques for space base electronics
The use of dry processing and alternate dielectrics for processing wafers is reported. A two dimensional modeling program was written for the simulation of short channel MOSFETs with nonuniform substrate doping. A key simplifying assumption used is that the majority carriers can be represented by a sheet charge at the silicon dioxide-silicon interface. In solving current continuity equation, the program does not converge. However, solving the two dimensional Poisson equation for the potential distribution was achieved. The status of other 2D MOSFET simulation programs are summarized.
Trotter, J. D.↗
A diagnostic model for studying daytime urban air quality trends
A single cell Eulerian photochemical air quality simulation model was developed and validated for selected days of the 1976 St. Louis Regional Air Pollution Study (RAPS) data sets; parameterizations of variables in the model and validation studies using the model are discussed. Good agreement was obtained between measured and modeled concentrations of NO, CO, and NO2 for all days simulated. The maximum concentration of O3 was also predicted well. Predicted species concentrations were relatively insensitive to small variations in CO and NOx emissions and to the concentrations of species which are entrained as the mixed layer rises.
Brewer, D. A.↗
Space propulsion systems. Present performance limits and application and development trends
Typical spaceflight programs and their propulsion requirements as a comparison for possible propulsion systems are summarized. Chemical propulsion systems, solar, nuclear, or even laser propelled rockets with electrical or direct thermal fuel acceleration, nonrockets with air breathing devices and solar cells are considered. The chemical launch vehicles have similar technical characteristics and transportation costs. A possible improvement of payload by using air breathing lower stages is discussed. The electrical energy supply installations which give performance limits of electrical propulsion and the electrostatic ion propulsion systems are described. The development possibilities of thermal, magnetic, and electrostatic rocket engines and the state of development of the nuclear thermal rocket and propulsion concepts are addressed.
Buehler, R. D.↗
Advanced aircraft engine materials trends
Recent activities of the Lewis Research Center are reviewed which are directed toward developing materials for rotating hot section components for aircraft gas turbines. Turbine blade materials activities are directed at increasing metal temperatures approximately 100 C compared to current directionally solidified alloys by use of oxide dispersion strengthening or tungsten alloy wire reinforcement of nickel or iron base superalloys. The application of thermal barrier coatings offers a promise of increasing gas temperatures an additional 100 C with current cooling technology. For turbine disk alloys, activities are directed toward reducing the cost of turbine disks by 50 percent through near net shape fabrication of prealloyed powders as well as towards improved performance. In addition, advanced alloy concepts and fabrication methods for dual alloy disks are being studied as having potential for improving the life of future high performance disks and reducing the amount of strategic materials required in these components.
Dreshfield, R. L.↗
Trends and Techniques for Space Base Electronics
Simulations of various phosphorus and boron diffusions in SOS were completed and a sputtering system, furnaces, and photolithography related equipment were set up. Double layer metal experiments initially utilized wet chemistry techniques. By incorporating ultrasonic etching of the vias, premetal cleaning a modified buffered HF, phosphorus doped vapox, and extended sintering, yields of 98% were obtained using the standard test pattern. A two dimensional modeling program was written for simulating short channel MOSFETs with nonuniform substrate doping. A key simplifying assumption used is that the majority carriers can be represented by a sheet charge at the silicon dioxide silicon interface. Although the program is incomplete, the two dimensional Poisson equation for the potential distribution was achieved. The status of other Z-D MOSFET simulation programs is summarized.
Trotter, J. D.↗
Trends in unmanned planetary entry systems
Entry systems used in unmanned planetary exploration are discussed in terms of future missions and more complex demands made upon the design configurations of orbiters and atmospheric space probes. The presently on-going Galileo project involving a Jupiter orbiter and a probe of the Jovian atmosphere is mentioned, and the difficult entry requirements at a velocity of 48 km/sec and an angle of minus seven to minus 10 degrees into an atmosphere composed largely of hydrogen, are described. Re-entry parameters determined by the respective entry environment, type of entry approach (hyperbolic or elliptical orbit) entry velocity, and guidance technology are given attention. Aerobraking, involving relatively slow circularization of an initial elliptical orbit by repeated passes through the atmosphere, is investigated. Aerocapture, by which vehicles using controlled flight paths through the atmosphere, can go directly from a hyperbolic flyby trajectory to low circular orbit is described. Major attractions of aerobraking and aerocapture are analyzed in terms of modest technology needs and relatively small impact on spacecraft design.
French, J. R.↗
Global atmospheric distribution and trend of methylchloroform /CH3CCl3/
Results of global measurements of the concentration of atmospheric methylchloroform, a man-made gas with potentially harmful environmental consequences, performed over a two-year period are presented. Samples were collected weekly at Pt. Barrow and Poker Flats, Alaska, Cape Meares, Oregon, Cape Kumakahi, Hawaii, Samoa, and Cape Grim, Tasmania, and yearly at the South Pole, and methylchloroform concentrations were determined by electron capture-gas chromatographic techniques. A latitudinal profile of CH3CCl3 concentrations derived from the data exhibits a bump at high northern latitudes, where most of the sources are located. Average concentrations calculated for the Northern and Southern Hemispheres showed a rise in global concentrations at a rate of 6.7 + or - 2.0%/year for the period from January 1979 to January 1981, with concentrations rising more slowly in 1980 than in 1979. These yearly increases are also smaller than earlier rates of increase, explainable by a reduction in the rate of emission increase, and are consistent with an atmospheric lifetime of between 6 and 10 years.
Rasmussen, R. A.↗
Present status and future trends in near-Earth satellite orbit determination
The major components of an orbit determination system and the evolution of the elements making up each component are reviewed. Typical accuracies presently achievable in the orbit determination process, the factors limiting the accuracies, and improvements in the dynamic models used in the process are summarized. Models are developed for orbit determination programs which include: (1) time varying area for solar radiation pressure; (2) a time varying model for albedo radiation pressure; (3) Earth tides which account for the distortions in the Earth's body due to Sun and Moon attraction; and (4) ocean tides which affect satellite altimeter data.
Fuchs, A. J.↗