SEARCH · Engineering Papers

Results for “texture”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

All sources NASA NTRS DOE OSTI

NASA NTRS1986

Regional dust deposits on Mars - Physical properties, age, and history

This paper presents a description of the use of Viking infrared thermal mapper (IRTM), earth-based radar, and visual observations for the study of the existence of regional dust deposits. It is pointed out that these observations provide estimates of particle size, rock abundance, surface texture, thermal emissivity, and albedo. These estimates can be used to characterize surface deposits and to determine the degree of surface mantling. Attention is given to the regolith properties, atmospheric dust properties, and a model for formation of low-inertia regions. It is found that global dust storms deposit currently approximately 25 microns of material per year in the equatorial region. Over geologic time this value may vary from 0 to 250 microns due to variations in atmospheric conditions produced by orbital variations.

Christensen, P. R.↗

NASA NTRS1986

Evidence for successive episodes of condensation at high temperature in a part of the solar nebula

A polished thin section of a Ca-Al-rich inclusion CAI 3643 from the Allende meteorite has been studied by means of light and scanning electron microscopes, and electron and proton microprobes. The appearance and the mineral composition of the inclusion's three concentric layers: core, mantle, and crust are described. Despite differences in texture and composition, the three layers display a continuity in their modal mineralogical compositions, their extreme Al2O3 enrichments (53-69 percent, compared to 25-45 percent in other CAIs), and their trace element complementarity. This implies that all the layers of CAI 3643 have formed from the same cooling gaseous reservoir within a limited interval of time and space, consistent with an origin in a local transient heating event in the CV chondrite formation region of the nebula.

Wark, D. A.↗

NASA NTRS1985

Estimation of soil hydraulic properties with microwave techniques

Useful quantitative information about soil properties may be obtained by calibrating energy and moisture balance models with remotely sensed data. A soil physics model solves heat and moisture flux equations in the soil profile and is driven by the surface energy balance. Model generated surface temperature and soil moisture and temperature profiles are then used in a microwave emission model to predict the soil brightness temperature. The model hydraulic parameters are varied until the predicted temperatures agree with the remotely sensed values. This method is used to estimate values for saturated hydraulic conductivity, saturated matrix potential, and a soil texture parameter. The conductivity agreed well with a value measured with an infiltration ring and the other parameters agreed with values in the literature.

Oneill, P. E.↗

NASA NTRS1985

Assessment of simulation fidelity using measurements of piloting technique in flight. II

Two components of the Vertical Motion Simulator (presently being used to assess the fidelity of UH-60A simulation) are evaluated: (1) the dash/quickstop Nap-of-the-earth (NOE) piloting task, and (2) the bop-up task. Data from these two flight test experiments are presented which provide information on the effect of reduced visual field of view, variation in scene content and texture, and the affect of pure time delay in the closed-loop pilot response. In comparison with task performance results obtained in flight tests, the results from the simulation indicate that the pilot's NOE task performance in the simulator is significantly degraded.

Ferguson, S. W.↗

NASA NTRS1986

Gallium-bearing sphalerite in a metal-sulfide nodule of the Qingzhen (EH3) chondrite

The composition and possible history of the Qingshen (EH3) chondrite is presented. The chondrite contains a population of spheroidal metal-sulfide nodules, which display textural evidence of reheating and melting. Evidence of metal sulfuration is also present, suggesting replacement of metal by sulfide during melting. This process has led to the nucleation of perryite along metal-sulfide interfaces. The Ga-bearing sphalerite that was found may have formed by injection of molten sulfide droplets into the metal followed by subsolidus diffusion of Ga from the metal into the sulfide. The latter may occur because of Ga supersaturation in the metal during progressive sulfuration and its decreased affinity for the metal phase during cooling below the taenite-kamacite transition point.

Rambaldi, E. R.↗

NASA NTRS1986

Geological mapping potential of computer-enhanced images from the Shuttle Imaging Radar - Lisbon Valley Anticline, Utah

Computer-enhancement techniques applied to the SIR-A data from the Lisbon Valley area in the northern portion of the Paradox basin increased the value of the imagery in the development of geologically useful maps. The enhancement techniques include filtering to remove image speckle from the SIR-A data and combining these data with Landsat multispectral scanner data. A method well-suited for the combination of the data sets utilized a three-dimensional domain defined by intensity-hue-saturation (IHS) coordinates. Such a system allows the Landsat data to modulate image intensity, while the SIR-A data control image hue and saturation. Whereas the addition of Landsat data to the SIR-A image by means of a pixel-by-pixel ratio accentuated textural variations within the image, the addition of color to the combined images enabled isolation of areas in which gray-tone contrast was minimal. This isolation resulted in a more precise definition of stratigraphic units.

Curlis, J. D.↗

NASA NTRS1986

Use of SIR-A and Landsat MSS data in mapping shrub and intershrub vegetation at Koonamore, South Australia

Shrublands cover much of the interior of the Australian continent and support a large grazing industry. Distinguishing the woody perennial vegetation from the smaller herbaceous vegetation and soil-encrusting lichen found between the shrubs is critical for range management but is difficult to do using Landsat data alone. In this study Shuttle Imaging Radar-A (SIR-A) and Landsat data acquired over Koonamore Station are examined together. Given the low topography and fine textured soils at Koonamore, radar return should be primarily determined by the percent area occupied by shrubs. During periods when most of the vegetation was non-vigorous and spectrally homogeneous, SIR-A data, as a surrogate measure of shrub cover, allowed the reflectance due to shrubs in Landsat data to be separated from the reflectance due to the intervening ground. This method allows estimation of the intershrub reflectance properties that are related to herbaceous vegetation, lichen, and bare soil exposures.

Green, G. M.↗

NASA NTRS1986

A satellite passive 37-GHz scattering-based method for measuring oceanic rain rates

A combination of theory and measurement is used to develop a scattering-based method for quantitatively measuring rainfall over the ocean from Nimbus-7 Scanning Multichannel Microwave Radiometer (SMMR) 37-GHz observations. This technique takes the observed scattering effects of precipitation on 37-GHz brightness temperatures and applies it to the oceanic environment. It requires an estimate of the effective radiating temperature of the cloudy portion of the atmosphere, and a brightness temperature measurement of the cloud-free ocean surface. These two measurements bound all possible combinations of clear and cloudy conditions within a footprint in terms of bipolarized brightness temperatures. Any satellite-observed brightness temperature T(B) lower than these values is assumed to reflect scattering, which at 37 GHz is only due to precipitation-size hydrometeors. Because the technique involves linear transformation between dual polarized brightness temperature and rain rate, there are no nonlinear 'footprint filling' effects and a unique footprint-averaged rain rate results. It is shown that these SMMR-derived rain rates for five cases of convection over the Gulf of Mexico are closely related to simultaneously derived radar rain rates, having a correlation of 0.90. This technique is then applied to a massive squall line over the Gulf of Mexico, and the resulting rain rate distribution reflects features found in cloud top heights and texture inferred from GOES infrared and visible imagery.

Spencer, R. W.↗

NASA NTRS1986

Rb-Sr and Sm-Nd internal isochron ages of a subophitic basalt clast and a matrix sample from the Y75011 eucrite

Rb-Sr and Sm-Nd dating studies of the Yamato polymict eucrite Y75011, which contains several coarse-grained mesostasis-rich basaltic clasts with subophitic texture which are representative of pristine lavalike basalts extruded on the surface of the Howardite-Eucrite-Diogenite (HED) parent body, are reported. The results show that moderately evolved basaltic lavas were produced very early in the history of the HED parent body. Their preservation as clasts in the polymict eucrites suggests derivation from a different geological setting on the parent body than that occupied by the more thermally metamorphosed monomict eucrites. It is suggested that the preservation of pristine clasts in polymict eucrites may be due to their impact excavation to the surface of the parent body away from heat sources concentrated within impact craters.

Nyquist, L. E.↗

NASA NTRS1986

Ragland - An LL3.4 chondrite find from New Mexico

The Ragland, New Mexico, chondrite was found in 1978. It consists of a single stone of 12.16 kg that broke into three pieces. The stone is moderately weathered and has a pronounced chondritic texture. Bulk composition favors an LL classification, and modal analysis and oxygen isotopic composition are consistent with this. The thermoluminescence sensitivity of 0.056 + or - 0.020 normalized to Dhajala, compositional variability of olivine (mean Fa 18.3, sigma = 10.1) and low-Ca pyroxene (mean Fs 14.6, sigma = 6.7), and Ca concentrations in olivine indicate metamorphic subtype 3.4 + or - 0.1. The isotopically heavy oxygen composition, which is characteristic of subtypes 3.0-3.1, may be a primary characteristic and not a result of weathering. Low concentrations of radiogenic Ar-40 and planetary Ar-36 suggest noble gas loss.

Recca, S. I.↗

NASA NTRS1987

Cascaded-Blackbody Heat Radiators

New class of heat radiators made of metal or other conductive fin stock, fins of which are textured or covered with smaller fins. Measured from outside, effective emissivity of projected radiator surface greater than, and somewhat independent of, emissivity of flat surface made of same material. Special coatings to enhance emissivity not required, and emissivity not degraded significantly in long term by environmental effects. Intended orginally to radiate excess heat away from spacecraft, new radiators also used on Earth to dissipate heat in vacuum systems.

Keddy, Michael D.↗

NASA NTRS1986

Application of shuttle imaging radar to geologic mapping

Images from the Shuttle Imaging Radar - B (SIR-B) experiment covering the area of the Panamint Mountains, Death Valley, California, were examined in the field and in the laboratory to determine their usefulness as aids for geologic mapping. The covered area includes the region around Wildrose Canyon where rocks ranging in age from Precambrian to Cenozoic form a moderately rugged portion of the Panamint Mountains, including sharp ridges, broad alluviated upland valleys, and fault-bounded grabens. The results of the study indicate that the available SIR-B images of this area primarily illustrate variations in topography, except in the broadly alluviated areas of Panamint Valley and Death Valley where deposits of differing reflectivity can be recognized. Within the mountainous portion of the region, three textures can be discerned, each representing a different mode of topographic expression related to the erosion characteristics of the underlying bedrock. Regions of Precambrian bedrock have smooth slopes and sharp ridges with a low density of gullies. Tertiary monolithologic breccias have smooth, steep slopes with an intermediate density of gullies with rounded ridges. Tertiary fanglomerates have steep rugged slopes with numerous steep-sided gullies and knife-sharp ridges. The three topographic types reflect the consistancy and relative susceptibility to erosion of the bedrock; the three types can readily be recognized on topographic maps. At present, it has not been possible to distinguish on the SIR-B image of the mountainous terrain the type of bedrock, independent of the topographic expression.

Labotka, T. C.↗

NASA NTRS1986

Point contact silicon solar cells

The construction of a 22.2% efficient single-crystal silicon solar cell fabricated at Stanford University is described. The cell dimensions were 3 x 5 mm and 100 microns thick with a base lifetime of 500 microseconds. The cell featured light trapping between a texturized top surface and a reflective bottom surface, small point contact diffusions, alternating between n-type and p-type in a polka-dot pattern on the bottom surface, and a surface passivation on all surfaces between contact regions.

Swanson, R. M.↗

NASA NTRS1986

Heat exchanger for electrothermal devices

An improved electrothermal device is disclosed. An electrothermal thruster utilizes a generally cylindrical heat exchanger chamber to convert electricity to heat which raises the propellant temperature. A textured, high emissivity heat element radiatively transfers heat to the inner wall of this chamber that is ion beam morphologically controlled for high absorptivity. This, in turn, raises the temperature of a porous heat exchanger material in an annular chamber surrounding the cylindrical chamber. Propellant gas flows through the annular chamber and is heated by the heat exchanger material.

Zavesky, Ralph J.↗

NASA NTRS1987

Monitoring sediment transfer processes on the desert margin

LANDSAT Thematic Mapper and Multispectral Scanner data have been used to construct change detection images for three playas in south-central Tunisia. Change detection images have been used to analyze changes in surface reflectance and absorption between wet and dry season (intra-annual change) and between different years (inter-annual change). Change detection imagery has been used to examine geomorphological changes on the playas. Changes in geomorphological phenomena are interpreted from changes in soil and foliar moisture levels, differences in reflectances between different salt and sediments and the spatial expression of geomorphological features. Intra-annual change phenomena that can be detected from multidate imagery are changes in surface moisture, texture and chemical composition, vegetation cover and the extent of aeolian activity. Inter-annual change phenomena are divisible into those restricted to marginal playa facies (sedimentation from sheetwash and alluvial fans, erosion from surface runoff and cliff retreat) and these are found in central playa facies which are related to the internal redistribution of water, salt and sediment.

Millington, Andrew C.↗

NASA NTRS1985

Development of powder metallurgy 2XXX series Al alloy plate and sheet materials for high temperature aircraft structural applications, FY 1983/1984

The objective of this investigation is to fabricate and evaluate PM 2124 Al alloy plate and sheet materials according to NASA program goals for damage tolerance and fatigue resistance. Previous research has indicated the outstanding strength-toughness relationship available with PM 2124 Al-Zr modified alloy compositions in extruded product forms. The range of processing conditions was explored in the fabrication of plate and sheet gage materials, as well as the resultant mechanical and metallurgical properties. The PM composition based on Al-3.70 Cu-1.85 Mg-0.20 Mn with 0.60 wt. pct. Zr was selected. Flat rolled material consisting of 0.250 in. thick plate was fabricated using selected thermal mechanical treatments (TMT). The schedule of TMT operations was designed to yield the extreme conditions of grain structure normally encountered in the fabrication of flat rolled products, specifically recrystallized and unrecrystallized. The PM Al alloy plate and sheet materials exhibited improved strength properties at thin gages compared to IM Al alloys, as a consequence of their enhanced ability to inhibit recrystallization and grain growth. In addition, the PM 2124 Al alloys offer much better combinations of strength and toughnessover equivalent IM Al. The alloy microstructures were examined by optical metallographic texture techniques in order to establish the metallurgical basis for these significant property improvements.

Chellman, D. J.↗

NASA NTRS1987

Ada style guide (version 1.1)

Ada is a programming language of considerable expressive power. The Ada Language Reference Manual provides a thorough definition of the language. However, it does not offer sufficient guidance on the appropriate use of Ada's powerful features. For this reason, the Goddard Space Flight Center Ada User's Group has produced this style guide which addresses such program style issues. The guide covers three areas of Ada program style: the structural decomposition of a program; the coding and the use of specific Ada features; and the textural formatting of a program.

Seidewitz, Edwin V.↗

NASA NTRS1987

Bidirectional reflectance properties of planetary surface materials

Laboratory measurements using a spectrogoniometer to separate the effects of surficial texture and albedo in the characterization of planetary surface materials are discussed. An investigation of the surface of Io is discussed. A number of technical improvements to the goniometer are summarized.

Buratti, B.↗