Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

The X-Irradiation of Hydrazine and 1,1- Dimethylhydrazine

Hydrazine and 1,1-dimethylhydrazine were radiolyzed at room temperature by using about 1 gram of liquid or 1/2 to 2 liters of vapor at room-temperature vapor pressure. A tungsten-target X-ray source operating at 300 kilovolts and 6 to 8 milliamperes (0.1 to 1.0 A) was used at intensities of 1 times 10 (sup 2) to 1 times 10 (sup 3) roentgens per minute to give total doses of 4.1 rads to 2.3 times 10 (sup 6) rads. The amounts of decomposition were dependent on total dose and independent of dose rate. In the case of hydrazine vapor, the decomposition was also directly related to surface area. There was a lesser surface effect with liquid hydrazine, but this variable was not studied for 1,1-dimethylhydrazine. The order of decreasing sensitivity to X-radiation is as follows: hydrazine vapor, 1,1-dimethylhydrazine vapor, 1,1-dimethylhydrazine liquid, and hydrazine liquid. The decomposition products of hydrazine were nitrogen, hydrogen, ammonia, and unidentified products. The same products plus methylamine, dimethylamine, and hydrazine were found from the decomposition of 1,1-dimethylhydrazine. In addition, the 1,1-dimethylhydrazine underwent post-irradiation changes. Values for G (number of molecules of sample decomposed per 100 electronvolts of absorbed energy) of the order of 10 (sup 6) suggest that the vapor-phase decompositions are chain reactions.

X-RAY IRRADIATION↗

Vanadium diaphragm electrode serves as hydrogen diffuser in lithium hydride cell

Lithium hydride cell uses vanadium diaphragm electrode as a hydrogen diffuser. Vanadium is high in hydrogen gas solubility and permeability, is least sensitive to adverse surface effects, maintains good mechanical strength in hydrogen atmospheres, and appears to be compatible with all alkali-halide electrolytes and lithium metals.

Crouthamel, C. E.↗

Unipolar interaction of Mercury with the solar wind - The steady state bow shock problem.

The steady state electromagnetic interaction of the solar wind with the planet Mercury is computed for a spectrum of electrical conductivity functions using the assumption that no atmosphere or planetary magnetic field prohibits the direct interaction. The form of the induction is described by the unipolar effect and corresponds to the zero frequency limit of a transverse magnetic (TM) mode. Calculations are included to determine the effective surface temperature of the planet. These calculations include the apparent motion of the sun in the Hermean sky. It is shown that a significant interaction, detectable by a space probe, is plausible for reasonable conductivity functions. The strength of the interaction is considered in terms of the subsurface thermal gradient, and computations are given relating the strength of the solar wind interaction with the conductivity parameters.

Colburn, D. S.↗

An observational philosophy for GEOS-C satellite altimetry

The parameters necessary for obtaining a 10 cm accuracy for GEOS-C satellite altimetry are outlined. These data include oceanographic parameters, instrument calibration, pulse propagation, sea surface effects, and optimum design.

Weiffenbach, G. C.↗

Theory and measurement of emittance properties for radiation thermometry applications.

Some basic concepts of radiation physics are briefly reviewed to provide an introduction to the radiative properties - including emittance, reflectance, absorptance, and transmittance - their definitions, interrelations, theory and methods of measurement. Analyzed data showing typical characteristics of temperature and wavelength dependence, surface effects and environmental influences on the radiation properties of selected classes of materials are presented. Emphasis is placed on those emittance properties of particular interest to conventional radiation thermometry applications, but sufficient generality on all properties is presented to be useful for new or unusual techniques where a more detailed understanding of the behavior of materials is desirable. Data sources are identified to assist the reader in locating property information. It is the intention of the paper to give the reader a background to become more fully aware of the pitfalls, limitations, but of course, advantages in the use of data from the literature. The paper is written in the form of an abbreviated review fully documenting the more important topics and concepts which can only be treated briefly.

Dewitt, D. P.↗

Results of investigations on a 0.015-scale model (49-0) of the space shuttle orbiter in the NASA/Ames 3.5-foot hypersonic wind tunnel (OA87)

Experimental aerodynamic investigations were conducted on a scale model of the space shuttle orbiter, Configuration 140A/B. The objectives of this test were to: 1) verify supersonic stability and control characteristics, 2) analyze aerodynamic problem areas, 3) verify control surface effectiveness, and 4) investigate Reynolds number effects. Six-component aerodynamic force and moment data were recorded over an angle of attack range from 22 deg to 46 deg at a constant sideslip angle of 0 deg. The test Mach number was varied from 5.3 to 7.3 to 10.3. The Reynolds number per unit length was varied from 805,000 to 10 million per foot.

Petrozzi, M. T.↗

Condensate removal device for heat exchanger

A set of perforated tubes disposed at the gas output side of a heat exchanger, in a position not to affect the rate of flow of the air or other gas is described. The tubes are connected to a common manifold which is connected to a sucking device. Where it is necessary to conserve and recirculate the air sucked through the tubes, the output of the manifold is run through a separator to remove the condensate from the gas. The perforations in the slurper tubes are small, lying in the range of 0.010 inch to 0.100 inch. The tubes are disposed in contact with the surfaces of the heat exchanger on which the condensate is precipitated, whether fins or plates, so that the water may be directed to the tube openings by means of surface effects, together with the assistance of the air flow. Only about 5 percent of the air output need be thus diverted, and it effectively removes virtually all of the condensate.

Trusch, R. B.↗

Comparison of flight measurements with predictions from aeroelastic models in the NASA Langley Transonic Dynamics Tunnel

The NASA Langley Transonic Dynamics Tunnel, which has a variable density, Freon-12 (or air) test medium, was designed to study the dynamics and aeroelastic problems of aerospace vehicles. During the operation of this facility there have been various opportunities to compare wind tunnel and flight test results. Some of these opportunities arise from routine flight checks of the prototype, others from carefully designed comparative wind tunnel and flight experiments. A collection of data obtained from various published and unpublished sources is presented. The topics covered are: gust and buffet response, control surface effectiveness, flutter, and active control of aeroelastic effects. Some benefits and shortcomings of Freon-12 as a test medium are also discussed. Although areas of uncertainty are evident and there is a continuing need for improvements in model simulation and testing techniques, the results presented herein indicate that predictions from aeroelastic model tests are, in general, substantiated by full-scale flight tests.

Reed, W. H., III↗

Cosmic-ray exposure history at the Apollo 16 and other lunar sites - Lunar surface dynamics

Concordant Kr-81/Kr exposure ages for four station 11 breccias indicate an age of 50.3 plus or minus 0.8 m.y. for North Ray Crater. Ray structures visible from orbital photography suggest that stations 8 and 9 should contain a substantial amount of South Ray ejecta. Concordant Kr-81/Kr exposure ages at these sites indicate an age for South Ray Crater of 2.04 plus or minus 0.08 m.y. Surface effects show good general agreement with this young age, but discrepancies on a sample-by-sample basis seem to indicate that extensive presurface irradiations must have occurred.

Drozd, R. J.↗

An approach to high speed ship ride quality simulation

The high speeds attained by certain advanced surface ships result in a spectrum of motion which is higher in frequency than that of conventional ships. This fact along with the inclusion of advanced ride control features in the design of these ships resulted in an increased awareness of the need for ride criteria. Such criteria can be developed using data from actual ship operations in varied sea states or from clinical laboratory experiments. A third approach is to simulate ship conditions using measured or calculated ship motion data. Recent simulations have used data derived from a math model of Surface Effect Ship (SES) motion. The model in turn is based on equations of motion which have been refined with data from scale models and SES of up to 101 600-kg (100-ton) displacement. Employment of broad band motion emphasizes the use of the simulators as a design tool to evaluate a given ship configuration in several operational situations and also serves to provide data as to the overall effect of a given motion on crew performance and physiological status.

Malone, W. L.↗

Assessment of analytical and experimental techniques utilized in conducting plume technology tests 575 and 593

Since exhaust plumes affect vehicle base environment (pressure and heat loads) and the orbiter vehicle aerodynamic control surface effectiveness, an intensive program involving detailed analytical and experimental investigations of the exhaust plume/vehicle interaction was undertaken as a pertinent part of the overall space shuttle development program. The program, called the Plume Technology program, has as its objective the determination of the criteria for simulating rocket engine (in particular, space shuttle propulsion system) plume-induced aerodynamic effects in a wind tunnel environment. The comprehensive experimental program was conducted using test facilities at NASA's Marshall Space Flight Center and Ames Research Center. A post-test examination of some of the experimental results obtained from NASA-MSFC's 14 x 14-inch trisonic wind tunnel is presented. A description is given of the test facility, simulant gas supply system, nozzle hardware, test procedure and test matrix. Analysis of exhaust plume flow fields and comparison of analytical and experimental exhaust plume data are presented.

Baker, L. R.↗