SEARCH · Engineering Papers

Results for “structure determination”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

All sources NASA NTRS DOE OSTI

NASA NTRS1976

Determination of the interaction impedance of coupled cavity slow wave structures

The interaction impedance of coupled cavity slow wave structures can be measured by perturbing the resonances of a shorted length of the structure using a dielectric rod. An analysis of this procedure is presented. The analysis retains radial as well as axial electric fields and all significant space harmonics. The results obtained are easily programmed formulas for calculating total interaction impedance or Pierce impedance using the experimental data.

Connolly, D. J.↗

NASA NTRS1976

Analytical structural efficiency studies of borsic/aluminum compression panels

Analytically determined mass-strength curves, strain-strength curves, and dimensions are presented for structurally efficient hat-stiffened panels, corrugation-stiffened panels, hat-stiffened honeycomb-core sandwich panels, open-section corrugation panels, and honeycomb-core sandwich panels. The panels were assumed to be fabricated from either titanium, borsic/aluminum, or a combination of these materials. Borsic/aluminum panels and titanium panels reinforced with borsic/aluminum were lighter and stiffer than comparably designed titanium panels. Reinforced titanium panels had the same extensional stiffness as comparably designed Borsic/aluminum panels. For a given load, the structural efficiency of the hat-stiffened honeycomb-core sandwich panel was higher than the structural efficiency of the other stiffened panels.

Mcwithey, R. R.↗

NASA NTRS1977

Effect of flap deflection on the lift coefficient of wings operating in a biplane configuration

Biplane models with a lift flap were tested in a wind tunnel to study the effect of flap deflection on the aerodynamic coefficient of the biplane as well as of the individual wings. Optimization of the position flap was carried out, and the effect of changes in the chord length of the lower wing was determined for the aerodynamic structure of a biplane with a lift flap on the upper wing.

Stasiak, J.↗

NASA NTRS1978

Early stages of the oxidation of metal surfaces

Photoemission cross sections were calculated for the ZnO4(-6) cluster using the self consistent-chi alpha- scattered wave theory to display the main features of the ultraviolet and X-ray photoemission data from ZnO. A solid model is suggested for an absolute photoemission intensity comparison resulting in chi alpha intensities which are roughly 70% of the experimental values. Together with the experimental data, the calculations allow a complete determination of the electronic structure of a ZnO surface.

Gatos, H. C.↗

NASA NTRS1977

Ultraviolet spectrometer experiment for the Voyager mission

An objective grating spectrometer covering the wavelength range of 500 to 1700 A with a 10-A resolution is employed for the Voyager ultraviolet spectrometer experiment. In determining the composition and structure of the atmospheres of Saturn, Jupiter and several satellites, the ultraviolet spectrometer will rely on airglow mode observations to measure radiation from the atmospheres due to resonant scattering of solar flux, and the occultation mode for assessments of the atmospheric extinction of solar or stellar radiation as the spacecraft enters shadow zones. Since it is capable of prolonged stellar observations in the 500 to 1000 A wavelength range, the spectrometer is expected to make important contributions to exploratory studies of UV sources.

Broadfoot, A. L.↗

NASA NTRS1978

Properties of aspect-ratio-4.0 rectangular jets in a subsonic crossflow

A series of wind-tunnel and laboratory tests were conducted at the NASA Langley V/STOL tunnel facility to determine both the detailed structure and the induced effects of aspect-ratio-4.0 rectangular jets both in a subsonic crosswind and in quiescent conditions. Wind-tunnel tests were conducted on both blunt (nozzle major axis normal to free stream) and streamwise (nozzle major axis parallel to free stream) nozzle orientations for jet injection angles ranging from 15 to 90 degrees at jet-to-crossflow velocity ratios of 4, 8, and 10. Results indicate that the blunt nozzle induced effects are more significant than those produced by comparable streamwise-oriented jets and that both the flow-field structure and induced effects of streamwise-oriented rectangular jets are quite similar to those created by round jets. Additionally, it is shown that significant differences exist in the vortex flow fields generated by the same rectangular nozzle mounted in two different test hardware configurations.

Thames, F. C.↗

NASA NTRS1978

Growth of single crystals by vapor transport

The primary objectives of the program were to establish basic vapor transport and crystal growth properties and to determine thermodynamic, kinetic and structural parameters relevant to chemical vapor transport systems for different classes of materials. An important aspect of these studies was the observation of the effects of gravity-caused convection on the mass transport rate and crystal morphology. These objectives were accomplished through extensive vapor transport, thermochemical and structural studies on selected Mn-chalcogenides, II-VI and IV-VI compounds.

Wiedemeier, H.↗

NASA NTRS1979

Development of crashworthy passenger seats for general-aviation aircraft

Two types of energy absorbing passenger seat concepts suitable for installation in light twin-engine fixed wing aircraft were developed. An existing passenger seat for such an aircraft was used to obtain the envelope constraints. Ceiling suspended and floor supported seat concept designs were developed. A restraint system suitable for both concepts was designed. Energy absorbing hardware for both concepts was fabricated and tension and compression tests were conducted to demonstrate the stroking capability and the force deflection characteristics. Crash impact analysis was made and seat loads developed. The basic seat structures were analyzed to determine the adequacy of their strength under impact loading.

Reilly, M. J.↗

NASA NTRS1979

HiMAT structural development design methodology

In order to improve aerodynamic performance, a twist criterion was used to design the canard and wing lifting surfaces of two graphite-epoxy research aircraft. To meet that twist criterion, the lifting surfaces were tailored using graphite-epoxy tape. The outer surface of the aircraft is essentially constructed of 95 percent graphite epoxy materials. The analytical tools and methodology used to design those lifting surfaces are described. One aircraft was subjected to an 8g ground test in order to verify structural integrity and to determine how well the desired twist was achieved. Test results are presented and the reductions of both flight and ground strain test gages and their associated stresses are discussed.

Price, M. A.↗

NASA NTRS1979

Computational aerodynamics development and outlook /Dryden Lecture in Research for 1979/

Some past developments and current examples of computational aerodynamics are briefly reviewed. An assessment is made of the requirements on future computer memory and speed imposed by advanced numerical simulations, giving emphasis to the Reynolds averaged Navier-Stokes equations and to turbulent eddy simulations. Experimental scales of turbulence structure are used to determine the mesh spacings required to adequately resolve turbulent energy and shear. Assessment also is made of the changing market environment for developing future large computers, and of the projections of micro-electronics memory and logic technology that affect future computer capability. From the two assessments, estimates are formed of the future time scale in which various advanced types of aerodynamic flow simulations could become feasible. Areas of research judged especially relevant to future developments are noted.

Chapman, D. R.↗

NASA NTRS1980

Low-temperature solder for joining large cryogenic structures

Three joining methods were considered for use in fabricating cooling coils for the National Transonic Facility. After analysis and preliminary testing, soldering was chosen as the cooling coil joining technique over mechanical force fit and brazing techniques. Charpy V-Notch tests, cyclic thermal tests (ambient to 77.8 K) and tensile tests at cryogenic temperatures were performed on solder joints to evaluate their structural integrity. It was determined that low temperature solder can be used to ensure good fin-to-tube contact for cooling-coil applications.

Buckley, J. D.↗

NASA NTRS1981

Mechanical heating in the transition region

Attention is focused on the energy balance in the transition region and the role that mechanical heating plays in determining the temperature density structure of this region in a stellar atmosphere. Because of its role as the interface layer through which mass and energy flow between the chromospheres and corona, direct deposition of mechanical energy is a relatively unimportant factor in the overall energy balance in the transition region, except in the uppermost layers where the temperature approaches coronal values.

Withbroe, G.↗

NASA NTRS1980

Photometry of Saturn at large phase angles

In the present paper, the single-scattering phase function of Saturn's aerosols is determined from the vertical structure of Saturn's atmosphere, derived in a previous analysis, and Pioneer's imaging photometry of bright and dark zones on Saturn in red and blue light. The single-scattering phase function is well represented by a combination of two Henyey-Greenstein functions. Moderately forward scattering functions fit well both in red and blue light, although a definite difference between the two colors is found.

Tomasko, M. G.↗

NASA NTRS1981

Multi-spacecraft observations of solar hard X-ray bursts

The role of multi-spacecraft observations in solar flare research is examined from the point of view of solar hard X-ray bursts and their implications with respect to models of the impulsive phase. Multi-spacecraft measurements provide a stereoscopic view of the flare region, and hence represent the only direct method of measuring directivity of X-rays. In absence of hard X-ray imaging instruments with high spatial and temporal resolution, multi-spacecraft measurements provide the only means of determining the radial (vertical) structure of the hard X-ray source. This potential of the multi-spacecraft observations is illustrated with an analysis of the presently available observations of solar hard X-ray bursts made simultaneously by two or more of the following spacecraft: International Sun Earth Explorer-3, Pioneer Venus Orbiter, Helios-B and High Energy Astrophysical Observatory-A.

Kane, S. R.↗

NASA NTRS1981

The Lagrangian-mean motions forced by steady, dissipating equatorial waves. I

Waves are treated with a normal mode structure in order to determine the steady mean motion of the atmosphere that can be induced by dissipating equatorial waves. A model is developed which comprises a continuously stratified atmosphere at rest on the equatorial beta-plane. It is assumed that waves are excited by the corrugated bottom and are in a steady state, that dissipation is due to Newtonian cooling and Rayleigh friction, steadiness in wave magnitude is up to the second order, the waves have a long wave length, wave induced mean flows do not affect the waves, mean flows are steady, and dissipation mechanisms for the mean flows are the same as for the waves. Disturbance equations are formulated, along with Eulerian- and Lagrangian-mean flows, and the nonexistence of cross equatorial mean flows is demonstrated. Kelvin waves are shown to possess a Lagrangian-mean meridional circulation which is the same as the Eulerian-mean circulation. In the Boussinesq limit, however, neither the Eulerian- nor the Lagrangian-mean meridional circulations are caused by Kelvin waves. Further examination is made of Rossby-gravity waves and n = 1 westward propagating inertio-gravity waves.

Takahashi, M.↗

NASA NTRS1982

Observations and implications of natural laminar flow on practical airplane surfaces

The results of natural laminar flow (NLF) experiments conducted by NASA to determine if modern aircraft structures can benefit from NLF as do sailplanes are presented. Seven aircraft, ranging from a Cessna 210 to a Learjet 28/29, with relatively stiff skins were flown in production configurations with no modifications. Measurements were made of the boundary-layer laminar to turbulent transition locations on various aerodynamic surfaces, the effect of a total loss of laminar flow, the effect of the propeller slipstream on the wing boundary-layer transition and the boundary-layer profiles, the wing section profile drag, the effect of flight through clouds, and insect debris contamination effects. Favorable pressure gradients for NLF were concluded to be feasible up to a transition Reynolds number of 11 million. Laminar flows were observed in propeller slipstreams, and insects were found to cause transition 1/4 of the time.

Holmes, B. J.↗

NASA NTRS1983

A Southern Hemisphere VLBI Survey on a 275-km Baseline

A very long base interferometry (VLBI) survey at 2.29 GHz was conducted using a 275 km baseline consisting of the NASA Deep Space Network tracking site in Tidbinbilla, Australia, and the 64 m antenna located at Parkes, Australia. The purpose of the survey was to identify sources in the southern sky possessing strong compact cores ( 0.1 arcseconds). Such sources will be used to form a reference frame for conducting VLBI geodesy experiments in the Southern Hemisphere. The 70 candidate sources were chosen to be south of -39 degrees declination, and only four had been previously observed from the northern hemisphere. Of the observed sources, 49 were found to have compact structure. In addition to determining correlated flux densities, the delay and delay rate observables of several detected sources were used to determine an estimate of the three dimensional location of the Parkes antenna relative to the Tidbinbilla site with a 1-sigma accuracy of 10 meters.

Morabito, D. D.↗

NASA NTRS1983

MINIVER upgrade for the AVID system. Volume 1: LANMIN user's manual

The successful design of thermal protection systems for vehicles operating in atmosphere and near space environments requires accurate analyses of heating rate and temperature histories encountered along a trajectory. For preliminary design calculations, however, the requirement for accuracy must be tempered by the need for speed and versatility in computational tools used to determine thermal environments and structural thermal response. The MINIVER program has been found to provide the proper balance between versatility, speed and accuracy for an aerothermal prediction tool. The advancement in computer aided design concepts at Langley Research Center (LaRC) in the past few years has made it desirable to incorporate the MINIVER program into the LaRC Advanced Vehicle Integrated Design, AVID, system. In order to effectively incorporate MINIVER into the AVID system, several changes to MINIVER were made. The thermal conduction options in MINIVER were removed and a new Explicit Interactive Thermal Structures (EXITS) code was developed. Many upgrades to the MINIVER code were made and a new Langley version of MINIVER called LANMIN was created. The theoretical methods and subroutine functions used in LANMIN are described.

Engel, C. D.↗