Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “structural complexity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

Remote sensing of geobotanical relations in Georgia

The application of remote sensing to geological investigations, with special attention to geobotanical factors, was evaluated. The general areas of investigation included: (1) recognition of mineral deposits; (2) geological mapping; (3) delineation of geological structure, including areas of complex tectonics; and (4) limestone areas where ground withdrawal had intensified surface collapse.

Arden, D. D., Jr.↗

Baykonur

The 'Baykonur' cosmodrome, its functions, operations, and services are described in considerable detail. The launch complex, launching pads, launch structures, launchers with cable masts and propellant loading towers, are included. The sequence of all phases of rocket assembly and preparations for launch are depicted. Prelaunch procedures and the launch itself are described.

Vladimirov, B. P.↗

Numerical investigation of the perpendicular injector flow field in a hydrogen fueled scramjet

A computer program has been developed which numerically solves the full (elliptic) two-dimensional Navier-Stokes and specie equations near a slotted perpendicular hydrogen fuel injector in a scramjet engine. The program currently predicts the turbulent mixing of injected hydrogen fuel and air without reaction, and allows the study of separated regions of flow immediately preceding and following the injector as well as the complex shock-expansion structure produced by the injector in this region of the engine. Results are presented that describe the size of the separated regions near the injector as well as locations where ignition is likely to occur.

Drummond, J. P.↗

On the accuracy and precision of extinctions derived from general star counts

The accuracy and the applicability of the method of general star counts are discussed. The effects of statistical errors, pseudorandom errors, systematic errors, and sampling errors are considered. The conditions under which quantitatively useful results can be derived are identified. It is found that for plates reaching 17th to 20th mag, general star counts can be a useful technique for investigating the structure of dark cloud complexes located within 500 to 1000 pc of the sun.

Rossano, G. S.↗

A numerical study of candidate transverse fuel injector configurations in the Langley scramjet engine

A computer program has been developed that numerically solves the two-dimensional Navier-Stokes and species equations near one or more transverse hydrogen fuel injectors in a scramjet engine. The program currently computes the turbulent mixing and reaction of hydrogen fuel and air, and allows the study of separated regions of the flow immediately preceding and following the injectors. The complex shock-expansion structure produced by the injectors in this region of the engine can also be represented. Results are presented that describe the flow field near two opposing transverse fuel injectors and two opposing staged (multiple) injectors, and comparisons between the two configurations are made to assess their mixing and flameholding qualities.

Drummond, J. P.↗

Edge delamination in angle-ply composite laminates

Edge delamination has caused severe concern in the design and analysis of advanced composite materials and structures. Due to its complex nature, very limited knowledge for the problem is currently available. It involves not only geometric and material discontinuities but also inherently coupled mode I, II and III fracture in the layered anisotropic system. Based on complex-variable stress potentials in the anisotropic elasticity theory and eigenfunction expansion, exact orders of the crack-tip stress singularity and complete field solutions are obtained. Results are given for edge delaminated, angle-ply composites subjected to uniform axial extension for illustrative purposes. Effects of geometric, lamination, and crack variables are determined.

Wang, S. S.↗

Chemical compositions of planetary nebulae

The chemical compositions of 41 planetary nebulae are established on the basis of an analysis of image tube scanner measurements, supplemented by IUE data. An attempt is made to calculate a theoretical model that gives satisfactory values of the observed intensities, as well as a number of excitation-sensitive ratios, in order to obtain ionization correction factors applicable to the ionic concentrations that will lead to total abundance values. The quality of individual nebular analyses varies, depending on the completeness and accuracy of the observational data and the complexity of the nebular structure. Quality estimates are assigned for each element in each nebula, and an overall reliability index is given to each object. It is concluded that the confidence with which one can speak of the chemical composition of a nebula varies significantly.

Aller, L. H.↗

Launch vehicle aerodynamic data base development comparison with flight data

The aerodynamic development plan for the Space Shuttle integrated vehicle had three major objectives. The first objective was to support the evolution of the basic configuration by establishing aerodynamic impacts to various candidate configurations. The second objective was to provide continuing evaluation of the basic aerodynamic characteristics in order to bring about a mature data base. The third task was development of the element and component aerodynamic characteristics and distributed air loads data to support structural loads analyses. The complexity of the configurations rendered conventional analytic methods of little use and therefore required extensive wind tunnel testing of detailed complex models. However, the ground testing and analyses did not predict the aerodynamic characteristics that were extracted from the Space Shuttle flight test program. Future programs that involve the use of vehicles similar to the Space Shuttle should be concerned with the complex flow fields characteristics of these types of complex configurations.

Hamilton, J. T.↗

Electrodynamic coupling in magnetically confined stellar X-ray loops

The solar coronal complex X-ray structure is now known to involve radiation loops that coincide spatially with the magnetic loops confining the radiating plasma. An effort is presently made to identify primary submodels involved in the global coupling between a mechanical energy reservoir of beta value greater than 1 and a contiguous site of X-ray activity whose beta value is lower than 1. The 'dynamo' model invoked establishes a quantitative connection between mechanical driver properties and the dimensions, field strength, and number density distribution of elemental magnetic loops.

Ionson, J. A.↗

Hibonite: Crystal Chemistry and Origin of Blue Coloration in Meteoritic Assemblages

The blue color and optical spectra of hibonite, a common constituent of refractory inclusions in carbonaceous chondrites, are discussed. Because they may be manifestations of exotic cation species stabilized in unusual coordination sites in the hibonite crystalstructure. Hibonite, ideally CaAl12O19, is conducive to atomic substitution of host Ca2+ and Al3+ ions by a variety of lanthanide and first series transition elements. The latter cations are responsible for the colors of many rock-forming minerals as a result of intraelectronic or intervalence transitions. The visible-region spectra of most oxide and silicate minerals are generally well understood. Assignments of absorption bands in meteoritic hibonite optical spectra due to uncertainties of cation valencies and complexities in the crystal structure are examined. The crystal chemistry of hibonite is reviewed, Mossbauer spectral measurements of iron-bearing hibonite and electronic transitions that may be responsible for the blue coloration of meteoritic hibonites are discussed.

Burns, R. G.↗

Robot environment expert system

The Robot Environment Expert System uses a hexidecimal tree data structure to model a complex robot environment where not only the robot arm moves, but also the robot itself and other objects may move. The hextree model allows dynamic updating, collision avoidance and path planning over time, to avoid moving objects.

Potter, J. L.↗

Preliminary experiment requirements document for Solar and Terrestrial Atmospheres Spectrometer (STAS)

The principal scientific objective of the Solar and Terrestrial Atmospheres Spectrometer (STAS) project is the measurement of the absolute ultraviolet solar spectral irradiance with: (1) resolution of better than 15 mA, and (2) absolute irradiance uncertainty at the state of the art (less than or equal to 3%). High measurement accuracy coupled with high spectral resolution are necessary to identify the nature of the radiation, its variability, and to identify solar processes which may cause the changes. Solar radiation between 1200 and 3600 A dominates the photochemistry of the mesosphere and stratosphere. Some important minor species, such as NO, show very complex and fundamentally narrow structure in their photodestruction cross sections, especially in the region of the Schumann-Runge bands of O2. Understanding the photochemical processes in the terrestrial atmosphere requires knowledge of both the cross sections and of the solar spectrum with the highest possible resolution and accuracy.

Source record↗

Shock evolution in the outer heliosphere - Voyager and Pioneer observations

Observations are reported of 35 interplanetary shocks detected at heliocentric distances between 6.5 and 9.4 AU in mid-1980 by the Voyager 1, Voyager 2, and Pioneer 11 spacecraft. These shocks were all evidently generated by the interaction of corotating streams. Measurements of the pre- and postshock plasma parameters are used to determine the shock normals and speeds for each shock. Twelve of these 35 events are observed at all three spacecraft. The shock parameters at each spacecraft are compared to determine the time history for the 12 shocks. The single-spacecraft determinations of shock normal and speed are compared wih the results of several techniques for determining shock velocities using all three spacecraft. It is found that shocks undergo significant evolution as they travel past the three spacecraft. Every shock seen by both end spacecraft was also seen by the middle spacecraft. Shock formation possibly may be occurring at a heliocentric distance as great as 7 AU. It appears that the shock surfaces have a complex three-dimensional structure with 'ripples' on a scale of 0.001-1.0 AU.

Gazis, P. R.↗

The growth of radiative filamentation modes in sheared magnetic fields

Observations of prominences show them to require well-developed magnetic shear and to have complex small-scale structure. Researchers show here that these features are reflected in the results of the theory of radiative condensation. Researchers studied, in particular, the influence of the nominally negligible contributions of perpendicular (to B) thermal conduction. They find a large number of unstable modes, with closely spaced growth rates. Their scale widths across B show a wide range of longitudinal and transverse sizes, ranging from much larger than to much smaller than the magnetic shear scale, the latter characterization applying particularly in the direction of shear variation.

Vanhoven, Gerard↗

Outflows in the star-formation region near R CrA

Photographs, spectra, and velocities are presented for the Herbig-Haro objects and visible stars associated with the star-formation region near R CrA. The new data are used to discuss the gas outflows in the area. At least two flows are present; one is linked with the bright variable star R CrA, and the second with the IR source near HH 100. Special attention is given to HH 101. The velocity and spatial structures HH 101 are complex, but are consistent with condensations inside an expanding shell of material ejected from HH 100IR.

Hartigan, Patrick↗

On the pulsational overstability in narrowly confined viscous rings

Viscous accretion disks and rings are subject to pulsational overstability if the effective viscous stress is a rapidly increasing function of the disks' (or rings') surface density. Such a phenomenon is induced by the transfer of energy from shear to normal mode oscillations through viscous stress. The paper examines the global response of viscous accretion disks or rings to pulsational overstabilities. The analytic and preliminary numerical results indicate that all modes with wavelength longer than the scale height of the disk or ring are overstable. From the results, some examples of the complex time-dependent structure which may be induced by this overstability are illustrated. Finally, results are applied to narrow planetary rings to address the issues of maintenance of uniform precession and origin of eccentricity.

Papaloizou, J. C. B.↗

Thermal/structural design verification strategies for large space structures

Requirements for space structures of increasing size, complexity, and precision have engendered a search for thermal design verification methods that do not impose unreasonable costs, that fit within the capabilities of existing facilities, and that still adequately reduce technical risk. This requires a combination of analytical and testing methods. This requires two approaches. The first is to limit thermal testing to sub-elements of the total system only in a compact configuration (i.e., not fully deployed). The second approach is to use a simplified environment to correlate analytical models with test results. These models can then be used to predict flight performance. In practice, a combination of these approaches is needed to verify the thermal/structural design of future very large space systems.

Benton, David↗

Characterization of structural connections using free and forced response test data

The accurate prediction of system dynamic response often has been limited by deficiencies in existing capabilities to characterize connections adequately. Connections between structural components often are complex mechanically, and difficult to accurately model analytically. Improved analytical models for connections are needed to improve system dynamic preditions. A procedure for identifying physical connection properties from free and forced response test data is developed, then verified utilizing a system having both a linear and nonlinear connection. Connection properties are computed in terms of physical parameters so that the physical characteristics of the connections can better be understood, in addition to providing improved input for the system model. The identification procedure is applicable to multi-degree of freedom systems, and does not require that the test data be measured directly at the connection locations.

Lawrence, Charles↗