SEARCH · Engineering Papers

Results for “springs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

All sources NASA NTRS DOE OSTI

NASA NTRS1974

Identification and interpretation of tectonic features from Skylab imagery

The author has identified the following significant results. S190-B imagery confirmed previous conclusions from S190-A that the Garlock fault does not extend eastward beyond its known termination near the southern end of Death Valley. In the Avawatz Mountains, California, two faults related to the Garlock fault zone (Mule Spring fault and Leach Spring fault) show evidence of recent activity. There is evidence that faulting related to Death Valley fault zone extends southeastward across the Old Dad Mountains. There, the Old Dad fault shows evidence of recent activity. A significant fault lineament has been identified from McCullough Range, California southeastward to Eagle Tail Mountains in southwestern Arizona. The lineament appears to control tertiary and possible cretaceous intrusives. Considerable right lateral shear is suspected to have taken place along parts of this lineament.

Abdel-Gawad, M.↗

NASA NTRS1975

Crop status evaluations and yield predictions

The growth-environment relationships for greenhouse and field conditions are compared, and the development of growth-prediction models for spring wheat is discussed along with the development of models for predicting the date for spring wheat emergence in North Dakota.

Haun, J. R.↗

NASA NTRS1974

Periodic solutions in a class of nonlinear dual-mass systems

A class of nonlinear spring-mass systems with two degrees of freedom is studied. A numerical method is developed for determining the periodic solutions in such systems. The method grows out of a recent paper of Yen (1974a) in which properties of such periodic solutions have been investigated theoretically. Numerical results, obtained for some example systems involving linear, cubic and quintic spring forces, support the findings of Yen and reveal further details of the properties of such periodic solutions.

Yen, D. H. Y.↗

NASA NTRS1976

Locking mechanism for orthopedic braces

A locking mechanism for orthopedic braces is described which automatically prevents or permits the relative pivotable movement between a lower brace member and an upper brace member. The upper and lower brace members are provided with drilled bores within which a slidable pin is disposed, and depending upon the inclination of the brace members with respect to a vertical plane, the slidable pin will be interposed between both brace members. The secondary or auxiliary latching device includes a spring biased, manually operable lever bar arrangement which is manually unlatched and automatically latched under the influence of the spring.

I-Lechao, J.↗

NASA NTRS1976

Report on the lunar ranging at McDonald Observatory, 1 February - 31 May 1976

The four spring lunations produced 105 acquisitions, including the 2000th range measurement made at McDonald Observatory. Statistics were normal for the spring months. Laser and electronics problems are noted. The Loran-C station delay was corrected. Preliminary doubles data is shown. New magnetic tape data formats are presented. R and D efforts include a new laser modification design.

Palm, C. S.↗

NASA NTRS1976

Static coefficient test method and apparatus

The static coefficient of friction between contacting surfaces of a plurality of bodies is determined by applying a load to the bodies in a direction normal to the contacting surfaces. Opposite ends of a flexible filament are connected to a load cell and the first of the bodies. A motor continuously moves the second of the bodies away from the load cell at constant velocity at right angles to the force of the normal load so that the first body moves intermittently relative to the second body across a contact surface between them. The load on the surfaces, the nature of the surfaces, and the speed of the first body relative to the load cell are such that the filament is alternately and cyclically tensioned and relaxed as the movement occurs. The maximum tension occurs at the incipient stages of movement of the first body relative to the second body. The load cell derives a series of measurements which are coupled to an x-y recorder, from which the maximum forces of the filament are determined to enable the static coefficient of friction to be determined. From the maximum forces and the normal force, the coefficient is determined. For determining coefficients of friction where there are large compression loads, the normal load is applied with a calibrated compression spring that is deflected by a predetermined amount determined by a spring load vs. deflection calibration curve.

Haehner, C. L.↗

NASA NTRS1976

Aircraft-mounted crash-activated transmitter device

An aircraft crash location transmitter tuned to transmit on standard emergency frequencies is reported that is shock mounted in a sealed circular case atop the tail of an aircraft by means of a shear pin designed to fail under a G loading associated with a crash situation. The antenna for the transmitter is a metallic spring blade coiled like a spiral spring around the outside of the circular case. A battery within the case for powering the transmitter is kept trickle charged from the electrical system of the aircraft through a break away connector on the case. When a crash occurs, the resultant ejection of the case from the tail due to a failure of the shear pin releases the free end of the antenna which automatically uncoils. The accompanying separation of the connector effects closing of the transmitter key and results in commencement of transmission.

Manoli, R.↗

NASA NTRS1976

Application of LANDSAT system for improving methodology for inventory and classification of wetlands

The author has identified the following significant results. Thematic maps were produced for surface water in stratum 46. The presence of large amounts of surface water, particularly during the May period, is readily apparent in the photoreduced thematic maps. Sheet water comprises much of the water detected in the May scene. Spring sheet water tends to be ephemeral and occurs as a result of an ice seal which exists within the underlying soil, temporarily preventing the percolation of water. The abundance of water in the May scene is also a result of unusually heavy precipitation which occurred during the spring and the previous fall. A qualitative analysis of the July map indicates surface water is less abundant than during the previous May; however, surface water present in the July 1975 LANDSAT scene was unusually abundant compared to other midsummer LANDSAT scenes obtained since 1972. This condition was particularly apparent for the drift plain.

Gilmer, D. S.↗

NASA NTRS1976

The development of large diameter, high pressure, cryogenic radial static seals

Two configurations of radial static seals are developed for high-pressure 773 kg per sq cm cryogenic applications: a U-shaped fluorocarbon seal and a delta-shaped PTFE seal. The U-seal is a common commercial design consisting of a spring-loaded cup-shaped jacket; the basic principle is that the soft plastic jacket provides the interface between the piston and the bore, the jacket being held in place by a metal spring. The delta seal is based on the principle that the soft plastic delta cross section furnishes the interface at the metal face and circumferential face of the gland and cylinder. Test results indicate that both the plastic U-seal and the delta seal designs are sufficiently flexible to accommodate assembly in bore or piston grooves. Of these two configurations, the delta seal is found to be superior as it meets all the design requirements for proof pressure testing the turbopump components of the main engine in the Space Shuttle.

Burr, M. E.↗

NASA NTRS1976

Numerical determination of the transmissibility characteristics of a squeeze film damped forced vibration system

Numerical solutions of the governing equations of motion of a liquid squeeze film damped forced vibration system were carried out to examine the feasibility of using a liquid squeeze film to cushion and protect large structures, such as buildings, located in areas of high seismic activity. The mathematical model used was that for a single degree of freedom squeeze film damped spring mass system. The input disturbance was simulated by curve fitting actual seismic data with an eleventh order Lagranging polynomial technique. Only the normal component of the seismic input was considered. The nonlinear, nonhomogeneous governing differential equation of motion was solved numerically to determine the transmissibility over a wide range of physical parameters using a fourth-order Runge-Kutta technique. It is determined that a liquid squeeze film used as a damping agent in a spring-mass system can significantly reduce the response amplitude for a seismic input disturbance.

Sutton, M. A.↗

NASA NTRS1977

Research instrumentation for tornado electromagnetics emissions detection

Instrumentation for receiving, processing, and recording HF/VHF electromagnetic emissions from severe weather activity is described. Both airborne and ground-based instrumentation units are described on system and subsystem levels. Design considerations, design decisions, and the rationale behind the decisions are given. Performance characteristics are summarized and recommendations for improvements are given. The objectives, procedures, and test results of the following are presented: (1) airborne flight test in the Midwest U.S.A. (Spring 1975) and at the Kennedy Space Center, Florida (Summer 1975); (2) ground-based data collected in North Georgia (Summer/Fall 1975); and (3) airborne flight test in the Midwest (late Spring 1976) and at the Kennedy Space Center, Florida (Summer 1976). The Midwest tests concentrated on severe weather with tornadic activity; the Florida and Georgia tests monitored air mass convective thunderstorm characteristics. Supporting ground truth data from weather radars and sferics DF nets are described.

Jenkins, H. H.↗

NASA NTRS1975

Detection of short-term changes in vegetation cover by use of LANDSAT imagery

The author has identified the following significant results. By using a constant band 6 to band 5 radiance ratio of 1.25, the changing pattern of areas of relatively dense vegetation cover was detected for the semiarid region in the vicinity of Tucson, Arizona. Electronically produced binary thematic masks were used to map areas with dense vegetation. The foliar cover threshold represented by the ratio was not accurately determined but field measurements show that the threshold lies in the range of 10 to 25 percent foliage cover. Montana evergreen forests with constant dense cover were correctly shown to exceed the threshold on all dates. The summer active grassland exceeded the threshold in the summer unless rainfall was insufficient. Desert areas exceeded the threshold during the spring of 1973 following heavy rains; the same areas during the rainless spring of 1974 did not exceed threshold. Irrigated fields, parks, golf courses, and riparian communities were among the habitats most frequently surpassing the threshold.

Turner, R. M.↗

NASA NTRS1976

Stiffness coupling application to modal synthesis program, users guide

A FORTRAN IV computer program used to perform modal synthesis of structures by stiffness coupling, using the dynamic transformation method is described. The program was named SCAMP (Stiffness Coupling Approach Modal-Synthesis Program). The program begins with the entry of a substructure's physical mode shapes and eigenvalues or a substructure's mass and stiffness matrix. If the mass and stiffness matrices are entered, the eigen problem for the individual substructure is solved. Provisions are included for a maximum of 20 substructures which are coupled by stiffness matrix springs. Each substructure has a number degrees of freedom (DOF), except that for DOF greater than 100; vector sets having maximum row and column size of 100 were generated prior to entering SCAMP. The substructures are then coupled together via coupling springs, and the dynamic transformation is used to reduce the size of the eigen problem.

Kuhar, E. J.↗

NASA NTRS1977

LACIE: Wheat yield models for the United States, revision A

For abstract, see volume 1 N77-30577. The enclosed maps indicate the areal coverage of the various models for spring (durum and other spring) and winter wheat. The given regions are the combination of several climatic divisions and many times comprise an entire state.

Source record↗

NASA NTRS1977

Variations in electron density in the middle latitude D-region above Urbana, Illinois

Electron density measurements made with the partial reflections technique above Urbana, Illinois (44 deg 10 min N, 88 deg 10 min W) were analyzed for day-to-day variations, seasonal variations, magnetic storm aftereffects, and stratosphere-ionosphere coupling effects. As well as showing a winter anomaly, the electron densities near 76 km were significantly lower in fall than in spring. Magnetic storm aftereffects of the type predicted by models of energetic electron precipitation at middle latitudes were observed. No strong correlations were found between stratospheric and D-region time series, or between the occurrence of stratospheric warmings and D-region changes. It is likely that most of the electron density variation was due to variations in the transport of minor neutral constituents. The spring-fall differences were also probably caused by differences in minor constituent concentrations rather than the effect of temperature changes on the recombination coefficient.

Wratt, D. S.↗

NASA NTRS1978

Rigid coupling is also flexible

Spring-loaded coupling is rigid under light loads and swivels under higher loads. Break-out point can be set at any desired value by selecting appropriate preload springs. Coupling requires no cushions or elastomeric joints that limit temperature range.

Appleberry, W. T.↗

NASA NTRS1977

Mechanical characteristics of stability-bleed valves for a supersonic inlet

Mechanical characteristics of a set of direct-operated relief valves used in a throat-bypass stability-bleed system designed for the YF-12 aircraft inlet are described. A comparison of data taken before and after the windtunnel tests (at room temperature) showed that both the effective spring rate and the piston friction had decreased during the wind tunnel tests. In neither the effective spring rate nor the piston friction was the magnitude of change great enough to cause significant impairment of overall system effectiveness. No major valve mechanical problems were encountered in any of the tests. During high temperature bench tests, piston frictional drag increased. The friction returned to its initial room temperature value when the stability-bleed valve was disassembled and reassembled. The problem might be solved by using a different material for the piston sleeve bearing and the piston rings.

Neiner, G. H.↗

NASA NTRS1978

Influence of wind turbine foundation

The 200 kW Mod-0A wind turbine was modeled using a 3 lumped mass-spring system for the superstructure and a rotational spring for the foundation and supporting soil. Natural frequencies were calculated using soil elastic moduli varying from 3000 to 22,400 p.s.i. The reduction in natural frequencies from the rigid foundation case ranged up to 20 percent.

Yee, S. T.↗