Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid state physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

A violet emission in ZnS:Mn,Eu: Luminescence and applications for radiation detection

We prepared manganese and europium co-doped zinc sulfide (ZnS:Mn,Eu) phosphors and used them for radiation detection. In addition to the red fluorescence at 583 nm due to the d-d transition of Mn ions, an intense violet emission at 420 nm is newly observed in ZnS:Mn,Eu phosphors. The emission is related to Eu{sup 2+} doping but only appears at certain Eu{sup 2+} concentrations. It is found that the intensity of the 420 nm violet fluorescence is X-ray does-dependent, while the red fluorescence of 583 nm is not. The ratio of fluorescence intensities at 420 nm and 583 nm has been monitored as a function of X-ray doses that exposed upon the ZnS:Mn,Eu phosphors. Empirical formulas are provided to estimate the doses of applied X-ray irradiation. Finally, possible mechanisms of X-ray irradiation induced fluorescence quenching are discussed. The intense 420 nm emission not only provides a violet light for solid state lighting but also offers a very sensitive method for radiation detection.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-temperature thermoelectric performance of heavily doped PbSe

We present a model calculation, employing first-principles calculations as well as empirical data, which suggests that properly hole-doped bulk PbSe may show a Seebeck coefficient as high as 230 μV/K, in a temperature regime in which the lattice thermal conductivity is rather small. It may therefore show a figure-of-merit ZT as high as 2 for temperatures of 1000 K. Heavily doped p-type PbSe may offer better thermoelectric performance than the sister material, optimized PbTe, for high-temperature applications such as power generation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Angular photonic band gap

We propose detailed numerical simulations of a class of material systems that strongly discriminate light based primarily on the angle of incidence, over a broad range of frequencies, and independent of the polarization. Unique properties of these systems emerge from investigating photonic crystals whose constituents have an anisotropic dielectric response.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Al{sub 2}O{sub 3} - TiO{sub 2}-A simple sol-gel strategy to the synthesis of low temperature sintered alumina-aluminium titanate composites through a core-shell approach

A simple sol-gel based core-shell approach for the synthesis of alumina-aluminium titanate composite is reported. Alumina is the core and titania is the shell. The coating of titania has been performed in aqueous medium on alumina particle by means of heterocoagulation of titanyl chloride. Further heat treatment results in low temperature formation of aluminium titanate as well as low temperature sintering of alumina-aluminium titanate composites. The lowering of the reaction temperature can be attributed to the maximisation of the contact surface between the reactants due to the core-shell approach involving nanoparticles. The mechanism of formation of aluminium titanate and the observations on densification features in the present process are compared with that of mixture of oxides under identical conditions. The sintered alumina-aluminium titanate composite has an average grain size of 2 {mu}m. - Graphical abstract: The article presents a simple sol-gel process through core-shell approach to the synthesis of low temperature sintered alumina-aluminium titanate. The lowering of the reaction temperature can be attributed to the maximisation of the contact surface between the reactant due to the core-shell approach. This material showed the better microstructure control compared to the standard solid-state mixing route.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spectroscopic studies of Dy3+ doped borate glasses for cool white light generation

Highlights: • BAZN glasses with Dy{sup 3+} ions were prepared using melt quench technique. • Under n-UV excitation the BAZN glasses show white light emission. • Energy transfer through cross-relaxation leads to concentration quenching. • Calculated CIE coordinates are close to the commercial w-LED. • 0.5 mol% of Dy{sup 3+} in these glasses are apt for cool white light generation. - Abstract: The Dy{sup 3+} ions doped Na{sub 2}O-ZnO-Al{sub 2}O{sub 3}-B{sub 2}O{sub 3} (BAZN) glasses with variable doping concentrations were synthesized by melt-quenching technique. The XRD pattern reveals amorphous nature of the as-synthesized glass. The FT-IR spectrum reveals various stretching and bending vibration of aluminates, borate and some other groups. The emission spectra exhibit two intense bands at around 482 nm (blue) and 575 nm (yellow) corresponding to the {sup 4}F{sub 9/2} → {sup 6}H{sub 15/2} and F{sub 9/2} → {sup 6}H{sub 13/2} transitions respectively. The CIE chromaticity coordinates of the as-synthesized glasses are lying in white region and in proximity to the coordinates for white light specified by National Television Standard Committee and commercial phosphor converted white light emitting devices. The decay profile of BAZN glasses showed bi-exponential behavior due to the energy transfer mechanism from excited donor ion to unexcited acceptor ion. The above-mentioned studies show potential of the as-synthesized Dy{sup 3+} doped BAZN glasses in solid state lighting applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Desolvation Processes in Channel Solvates of Niclosamide

The antiparasitic drug niclosamide (NCL) is notable for its ability to crystallize in multiple 1:1 channel solvate forms, none of which are isostructural. Here, using a combination of time-resolved synchrotron powder X-ray diffraction and thermogravimetry, the process-induced desolvation mechanisms of methanol and acetonitrile solvates are investigated. Structural changes in both solvates follow a complicated molecular-level trajectory characterized by a sudden shift in lattice parameters several degrees below the temperature where the desolvated phase first appears. Model fitting of kinetic data obtained under isothermal heating conditions suggests that the desolvation is rate-limited by the nucleation of the solvent-free product. The desolvation pathways identified in these systems stand in contrast to previous investigations of the NCL channel hydrate, where water loss by diffusion initially yields an anhydrous isomorph that converts to the thermodynamic polymorph at significantly higher temperatures. Taking the view that each solvate lattice is a unique “pre-organized” precursor, a comparison of the pathways from different starting topologies to the same final product provides the opportunity to reevaluate assumptions of how various factors (e.g., solvent binding strength, density) influence solid-state desolvation processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bright White Light Emission from Ultrasmall Cadmium Selenide Nanocrystals

A simple treatment method using formic acid has been found to increase the fluorescence quantum yield of ultrasmall white light-emitting CdSe nanocrystals from 8% to 45%. Brighter white-light emission occurs with other carboxylic acids as well, and the magnitude of the quantum yield enhancement is shown to be dependent on the alkyl chain length. Additionally, the nanocrystal luminescence remains enhanced relative to the untreated nanocrystals over several days. This brightened emission opens the possibility for even further quantum yield improvement and potential for use of these white-light nanocrystals in solid-state lighting applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An europium( iii ) diglycolamide complex: insights into the coordination chemistry of lanthanides in solvent extraction

The synthesis, stoichiometry, and structural characterization of a homoleptic, cationic europium(III) complex with three neutral tetraalkyldiglycolamide ligands are reported. The tri(bismuth tetrachloride)tris(N,N,N',N'-tetra-n-octyldiglycolamide)Eu salt, [Eu(TODGA)3][(BiCl4)3] obtained from methanol was examined by Eu L3-edge X-ray absorption spectroscopy (XAS) to reveal an inner-sphere coordination of Eu3+ that arises from 9 O atoms and two next-nearest coordination spheres that arise from 6 carbon atoms each. A structural model is proposed in which each TODGA ligand with its O[double bond, length as m-dash]Ca–Cb–O–Cb–Ca[double bond, length as m-dash]O backbone acts as a tridentate O donor, where the two carbonyl O atoms and the one ether O atom bond to Eu3+. Given the structural rigidity of the tridentate coordination motif in [Eu(TODGA)3]3+ with six 5-membered chelate rings, the six Eu–Ca and six Eu–Cb interactions are readily resolved in the EXAFS (extended X-ray absorption fine structure) spectrum. The three charge balancing [BiCl4]- anions are beyond the cationic [Eu(TODGA)3]3+ cluster in an outer sphere environment that is too distant to be detected by XAS. Despite their sizeable length and propensity for entanglement, the four n-octyl groups of each TODGA (for a total of twelve) do not perturb the Eu3+ coordination environment over that seen from previously reported single-crystal structures of tripositive lanthanide (Ln3+) complexes with tetraalkyldiglycolamide ligands (of the same 1 : 3 metal-to-ligand ratio stoichiometry) but having shorter i-propyl and i-butyl groups. The present results set the foundation for understanding advanced solvent extraction processes for the separation of the minor, tripositive actinides (Am, Cm) from the Ln3+ ions in terms of the local structure of Eu3+ in a solid state coordination complex with TODGA.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic shell structures, self-trapped excitons, and defect-bound excitons in Li 2 B 12 H 12

First-principles studies of electronic structures, excitons, and defects in Li 2 B 12 H 12 reveal unique photophysical properties of Li 2 B 12 H 12 and its potential as a neutron scintillator material. We identify the electronic shell structure in (B 12 H 12 ) 2- , which gives rise to strong chemical stability of (B 12 H 12 ) 2- and a large band gap of Li 2 B 12 H 12 . Based on hybrid functional calculations, we show that excitons in Li 2 B 12 H 12 are strongly self-trapped and predict that the exciton excitation and emission are both in the UV range and are not related to the bright blue emission observed in the experiment. The experimentally observed blue emission in Li 2 B 12 H 12 is likely due to the emission of excitons bound to hydrogen vacancies. The calculated strong localization and large exciton trapping energy at hydrogen vacancies indicate enhanced radiative recombination, while the calculated large Stokes shift suggests that the self-absorption and the resonance transfer of the excitation energy may be suppressed. These properties should promote efficient defect emission at room temperature. The efficient defect emission, combined with the large thermal neutron capture cross-section by Li and B and the efficient energy transfer between fast neutrons and H, suggests potential applications of Li 2 B 12 H 12 as a thermal or fast neutron scintillator. Optical characterization of VH may also be used to monitor H and Li concentrations in Li 2 B 12 H 12 -based hydrogen storage materials and solid-state electrolytes in Li batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NIR to blue light upconversion in Tm{sup 3+}/Yb{sup 3+} codoped BaTiO{sub 3} tellurite glass

Upconversion is an interesting optical property, generally shown by rare-earth doped materials. This unusual optical behavior shown by these rare-earths doped materials are due to their peculiar atomic configuration and electronic transitions. Here, the Tm{sup 3+}-Yb{sup 3+} codoped BaTiO{sub 3} glass with TeO{sub 2} as former has been prepared by conventional melt and quench technique and the upconversion property has been investigated with the help of near infrared (NIR) to Visible UC study. The generation of the visible UC bands around ∼ 476 nm, ∼ 653 nm, ∼ 702 nm and one NIR UC band at ∼795 nm are assigned due to the {sup 1}G{sub 4}→ {sup 3}H{sub 6}, {sup 1}G{sub 4}→ {sup 3}F{sub 4}, {sup 3}F{sub 2}→ {sup 3}H{sub 6} and {sup 3}H{sub 4}→ {sup 3}H{sub 6} transitions respectively. The generations of these upconversion bands have been discussed in detail with the help of energy level diagram. The colour coordinates corresponding to the prepared material have been shown with the help of CIE chromaticity diagram. These glasses can be very appropriately used in the fabrication of solid state laser and as NIR to blue light upconverter.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electric field sensitivity of molecular color centers

Molecular color centers with S=1 ground states are promising candidates for quantum sensing of electric fields. These molecules have an electronic structure similar to solid state color centers, but they allow for processing modalities that permit direct interfacing with an analyte. Currently, it is unknown how sensitive these molecules are to electric fields and what molecular properties affect their sensitivity. We perform density functional theory calculations to understand the impact of electric fields on the electronic structure of five nominally tetrahedral molecular color centers exhibiting variable transition metal chemistry and ligand densities. We then extract the Stark parameters from each of these molecules and compare them to molecular properties such as the dipole moment and inner shell stiffness and find that the dipole moment of the molecule largely governs sensitivity. We predict that polar heteroleptic molecules may have electric field sensitivities comparable to solid state color centers such as nitrogen-vacancy centers in diamond.

Physics↗

Bistability of self-modulation oscillations in an autonomous solid-state ring laser

Bistable self-modulation regimes of generation for a ring YAG : Nd chip laser with the counterpropagating waves asymmetrically coupled via backward scattering are simulated numerically. Two branches of bistable self-modulation regimes of generation are found in the domain of the parametric resonance between the selfmodulation and relaxation oscillations. The self-modulation regimes observed in earlier experiments pertain to only one of the branches. Possible reasons for such a discrepancy are considered, related to the influence of technical and natural noise on the dynamics of solid-state ring lasers. (control of laser radiation parameters)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Melting and transport properties of Al 2⁢ O 3 at extreme conditions

The high-pressure, temperature phase diagram and transport properties of materials are of broad interest to planetary sciences and high-energy-density sciences and applications. Alumina (Al 2 O 3 ) or its various forms (e.g., solutions with other oxides or silicates) are important constituents in Earth’s and super-Earths’ mantles, common window materials in dynamic compression experiments, and standard pressure calibrators in diamond-anvil-cell experiments. Its structures and transport properties are of particular importance but have not been well studied at above 100 GPa pressures. Based on extensive first-principles molecular dynamics calculations, we obtain atomic level insights on structural differences and accurate results on electrical conductivity (σ dc ), thermal conductivity (κ), and reflectivity of Al 2 O 3 in several phases at pressures of ~130–1300 GPa and temperatures of 4000–20,000 K. We find the solid-to-liquid state changes of Al 2 O 3 are accompanied by an insulator-to-semimetal transition with enhanced σ dc and κ, which is similar to other silicates and oxides and can facilitate magnetic field generation in deep interiors of rocky planets. We also find the solid-to-solid transition (from Rh 2 O 3 (II) to CaIrO 3 ) is accompanied by negligible changes in σ dc and κ at 160 GPa, contrary to previous expectations, whereas another higher pressure phase transition (CaIrO 3 to U 2 S 3 at 450 GPa) is associated with increases in σ dc and κ. Furthermore, we show the transport properties can be enhanced by oxygen vacancy in Al 2 O 3 , but are not significantly affected by forming solutions with MgSiO 3 , particularly when in the solid states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Solid-to-plasma transition of polystyrene induced by a nanosecond laser pulse within the context of inertial confinement fusion

Laser Direct Drive (LDD) Inertial Confinement Fusion (ICF) involves irradiating a spherical target of thermonuclear fuel coated with an ablator, usually made of polystyrene. Laser energy absorption near the target surface leads to matter ablation, hydrodynamic shocks, and ultimately capsule implosion. The conservation of spherical symmetry is crucial for implosion efficiency, yet spatial modulations in laser intensity can induce nonuniformities, causing the laser imprint phenomenon. Understanding laser imprint, especially considering the initial solid state, is essential for advancing LDD ICF. A first microscopic model of solid-to-plasma transition was built in 2019, accounting for laser absorption in the solid state with a band structure based ionization model. This model has been improved to include chemical fragmentation and a more accurate description of electron collision frequency in various matter states. The latest development involves assessing the model reliability by comparing theoretical predictions with experimental observations. Despite the success of this approach, questions remain, leading to further investigations and observations under different irradiation conditions. This work presents an experiment with a nanosecond pulse, taking into account hydrodynamic effects, and measures transmission dynamics over the entire laser beam area to observe two-dimensional effects. As a result, the objective is to adapt the theoretical model, couple it with a hydrodynamic code, and observe additional effects related to the initial solid state.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Generalized approach for rapid entropy calculation of liquids and solids

We build a comprehensive methodology for the fast computation of entropy across both solid and liquid phases. The proposed method utilizes a single trajectory of molecular dynamics (MD) to facilitate the calculation of entropy, which is composed of three components. The electronic entropy is determined through the temporal average acquired from density functional theory MD simulations. The vibrational entropy, typically the predominant contributor to the total entropy, even within the liquid state, is evaluated by computing the phonon density of states via the velocity autocorrelation function. The most arduous component to quantify, the configurational entropy, is assessed by probability analysis of the local structural arrangement and atomic distribution. We illustrate, through a variety of examples, that this method is both a versatile and valid technique for characterizing the thermodynamic states of both solids and liquids. Furthermore, this method is employed to expedite the calculation of melting temperatures, demonstrating its practical utility in computational thermodynamics.

36 MATERIALS SCIENCE↗

Two-Stage Melting in Systems of Strongly Interacting Rydberg Atoms

We analyze the ground state properties of a one-dimensional cold atomic system in a lattice, where Rydberg excitations are created by an external laser drive. In the classical limit, the ground state is characterized by a complete devil's staircase for the commensurate solid structures of Rydberg excitations. Using perturbation theory and a mapping onto an effective low-energy Hamiltonian, we find a transition of these commensurate solids into a floating solid with algebraic correlations. For stronger quantum fluctuations the floating solid eventually melts within a second quantum phase transition and the ground state becomes paramagnetic.

36 MATERIALS SCIENCE↗

Atomic Control of Conductivity Versus Ferromagnestism in Wide-Gap Oxides via Selective Doping: V, Nb, Ta in Anatase TiO2

We identify two general types of electronic behaviors for transition-metal impurities that introduce excess electrons in oxides. (1) The dopants introduce resonant states inside the host conduction band and produce free electrons; (2) the dopants introduce a deep gap state that carries a magnetic moment. By combining electronic structure calculations, thermodynamic simulations, and percolation theory, we quantify these behaviors for the case of column V-B dopants in anatase TiO{sub 2}. Showing behavior (1), Nb and Ta dopants can convert the insulator TiO{sub 2} into a transparent conductor. Showing behavior (2), V dopants could convert nonmagnetic TiO{sub 2} into a ferromagnet. Whether a dopant shows behavior (1) or (2) is encoded in its atomic d orbital energy.

36 MATERIALS SCIENCE↗

Density Functional Theory Studies of the Electronic Structure of Solid State Actinide Oxides

The actinide oxides have been extensively studied in the context of the nuclear fuel cycle. They are also of fundamental interest as members of a class of strongly correlated materials, the Mott insulators. Their complex physical and chemical properties make them challenging systems to characterize, both experimentally and theoretically. Chiefly, this is because actinide oxides can exhibit both electronic localization and electronic delocalization and have partially occupied f orbitals, which can lead to multiple possibilities for ground states. Of particular concern for theoretical work is that the large number of competing states display strong correlations which are dffcult to capture with computationally tractable methods.

Environmental Molecular Sciences Laboratory↗