Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “separation technologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,261 records · Page 70

For Spacious Skies: Self-Separation with "Autonomous Flight Rules" in US Domestic Airspace

Autonomous Flight Rules (AFR) are proposed as a new set of operating regulations in which aircraft navigate on tracks of their choice while self-separating from traffic and weather. AFR would exist alongside Instrument and Visual Flight Rules (IFR and VFR) as one of three available flight options for any appropriately trained and qualified operator with the necessary certified equipment. Historically, ground-based separation services evolved by necessity as aircraft began operating in the clouds and were unable to see each other. Today, technologies for global precision navigation, emerging airborne surveillance, and onboard computing enable traffic conflict management to be fully integrated with navigation procedures onboard the aircraft. By self-separating, aircraft can operate with more flexibility and fewer flight restrictions than are required when using ground-based separation. The AFR concept proposes a practical means in which self-separating aircraft could share the same airspace as IFR and VFR aircraft without disrupting the ongoing processes of Air Traffic Control. The paper discusses the context and motivation for implementing self-separation in US domestic airspace. It presents a historical perspective on separation, the proposed way forward in AFR, the rationale behind mixed operations, and the expected benefits of AFR for the airspace user community.

Wing, David J.↗

Carbon Nanotubes: Measuring Dispersion and Length

Advanced technological uses of single-wall carbon nanotubes (SWCNTs) rely on the production of single length and chirality populations that are currently only available through liquid phase post processing. The foundation of all of these processing steps is the attainment of individualized nanotube dispersion in solution; an understanding of the collodial properties of the dispersed SWCNTs can then be used to designed appropriate conditions for separations. In many instances nanotube size, particularly length, is especially active in determining the achievable properties from a given population, and thus there is a critical need for measurement technologies for both length distribution and effective separation techniques. In this Progress Report, we document the current state of the art for measuring dispersion and length populations, including separations, and use examples to demonstrate the desirability of addressing these parameters.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Protein engineering for critical metal recovery beyond REEs

Achieving decarbonization and electrification goals will require expanded production of critical minerals (CM), including Li, Co, Cu, rare earths, Ni, and graphite, whose supply chains are geopolitically vulnerable. Problematically, current extraction and separation processes pose severe environmental burdens that impede the development of a diversified domestic supply chain and undercut the environmental benefits of energy technologies [1, 2]. The development of efficient, economical, and environmentally sustainable processing technologies is thus important for meeting the CM demand of the emerging energy technology market. To this end, we have recently developed an all-aqueous protein-based process for rare earth element (REE) extraction and separation. To extend our protein-based approach to critical metals beyond REEs, the goal of this project was to develop a protein discovery and engineering pipeline to generate a panel of proteins that selectively bind target critical metals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Coal-gold agglomeration: an alternative separation process in gold recovery

Considering the increasing environmental concerns and the potential for small gold deposits to be exploited in the future, the uses of environmentally friendly processes are essential. Recent developments point to the potential for greatly increased plant performance through a separation process that combines the cyanide and flotation processes. In addition, this kind of alternative treatment processes to the traditional gold recovery processes may reduce the environmental risks of present small-scale gold mining. Gold recovery processes that applied to different types of gold bearing ore deposits show that the type of deposits plays an important role for the selection of mineral processing technologies in the production of gold and other precious metals. In the last 25 years, different alternative processes have been investigated on gold deposits located in areas where environmental issues are a great concern. In 1988, gold particles were first recovered by successful pilot trial of coal-gold agglomeration (CGA) process in Australia. The current paper reviews the importance of CGA in the production of gold ore and identifies areas for further development work.

01 COAL, LIGNITE, AND PEAT↗

Brayton advanced heat receiver development program

NASA Lewis Research Center is managing an advanced solar dynamic (ASD) space power program. The objective of the ASD program is to develop small and lightweight solar dynamic systems which show significant improvement in efficiency and specific mass over the baseline design derived from the Space Station Freedom technology. The advanced heat receiver development program is a phased program to design, fabricate and test elements of a 7-kWe heat-receiver/thermal-energy-storage subsystem. Receivers for both Brayton and Stirling heat engines are being developed under separate contracts. Phase I, described here, is the current eighteen month effort to design and perform critical technology experiments on innovative concepts designed to reduce mass without compromising thermal efficiency and reliability.

Heidenreich, G. R.↗

Experimental Investigation of the Effect of Atomizing Electrospray Nozzles on the Cooling and Reduced Humidification of Air

Separating sensible and latent cooling have shown the potential to reduce energy consumption in A/C systems for building HVAC applications. Several technologies exist based on vapor-compression refrigeration, enthalpy wheels, chemical adsorption and absorption materials, and mechanical cooling. However, their thermodynamics limits and high energy consumption hinder their deployment in hot and humid climatic regions. This paper focuses on separating sensible and latent cooling by using a new thermodynamics process and in-kind (i.e., non-vapor compression-based) technology. Highly electrically charged water droplets were sprayed in the airflow. These droplets attracted water vapor molecules to their surfaces and promoted condensation. The phenomenon was the result of simultaneous dielectrophoresis and electro-diffusion interactions. Studies in the literature have shown that using multiple capillary electrodes reduced air moisture by up to 5% when using nanometer-size droplets in the spray. Unfortunately, these studies were limited to low airflow rates, and the objective of this paper was to investigate how to scale up this in-kind approach to airflows typical of buildings. In the present paper, droplets of micrometer size were utilized to control the humidity for a 5-cfm flow rate. While this airflow was still low for building applications, it was 100 times fold the airflows in the literature studies. The air was tested at 20°C and at 50 and 80% relative humidity. A two-fluid atomizing nozzle produced the droplets in the spray, and high DC electric potential, up to 25 kV, was used to charge the fine droplets electrically. The air atomizing nozzle with high voltage potential resembled an evaporative cooler process. However, a measurable reduction of the absolute humidity of up to 2% was observed compared to the case of the nozzle with no high voltage potential. The entire device had one small nozzle selected from off-the-shelf components and had less than a 9 cm2 footprint area.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Magnetic fly-ash geopolymer for heavy metal removal in aqueous solutions

Novel magnetic geopolymers were manufactured by synthesizing magnetic Fe 3 O 4 particles on the surface of prepared geopolymer (Method 1) or by incorporating pre-synthesized magnetic Fe 3 O 4 particles into the geopolymer during the manufacture of the geopolymer (Method 2). This study evaluated the effect of the incorporated magnetic Fe 3 O 4 on the geopolymer magnetic, physical, and adsorption properties and its separation in aqueous solutions. Based on several preliminary measurements on the synthesized magnetic geopolymers, Method 2 was found to be a better method for producing magnetic geopolymer. Magnetic geopolymer synthesized by Method 2 exhibited ferromagnetic properties comparable to that of magnetic Fe 3 O 4 , with a saturation magnetization of 8 emu·g −1 and an intrinsic coercivity of 265 Oe. The magnetic geopolymer was efficiently separated from an aqueous solution within 2 min using a 0.48-T magnetic field. In addition, the magnetic geopolymer has a maximum copper adsorption capacity of 111.1 mg·g −1 , which was similar to the non-magnetic reference geopolymer indicating that the addition of magnetic Fe 3 O 4 did not compromise the geopolymer adsorption capacity. The magnetic geopolymer is a promising material with good adsorption and separation properties that can be used for heavy metals removal and recovery in wastewater and metals separation in industrial processes.

fly ash↗

Autonomous Flight Rules - A Concept for Self-Separation in U.S. Domestic Airspace

Autonomous Flight Rules (AFR) are proposed as a new set of operating regulations in which aircraft navigate on tracks of their choice while self-separating from traffic and weather. AFR would exist alongside Instrument and Visual Flight Rules (IFR and VFR) as one of three available flight options for any appropriately trained and qualified operator with the necessary certified equipment. Historically, ground-based separation services evolved by necessity as aircraft began operating in the clouds and were unable to see each other. Today, technologies for global navigation, airborne surveillance, and onboard computing enable the functions of traffic conflict management to be fully integrated with navigation procedures onboard the aircraft. By self-separating, aircraft can operate with more flexibility and fewer restrictions than are required when using ground-based separation. The AFR concept is described in detail and provides practical means by which self-separating aircraft could share the same airspace as IFR and VFR aircraft without disrupting the ongoing processes of Air Traffic Control.

Wing, David J.↗

Aperture synthesis using orbiting telescopes

A study was carried out to determine the feasibility, with current technology, of performing aperture synthesis using two telescopes orbiting the earth in coordinated orbits separated by approximately 10 m to 1 km. The objective was to determine whether there is a practical alternative to a very large, deployed, servo-controlled submillimeter telescope (i.e., the Large Deployable Reflector) for obtaining high-resolution submillimeter images of astronomical sources. It is found that suitable classes of orbits exist which can provide good UV coverage over the entire sky and the real-time correlation of wideband signals can be performed in orbit using current technology. The most difficult task appears to be the real-time determination of the orientation of the baseline vector in a stable coordinate system. A plausible scheme has been identified for the determination of an arbitrary direction to within 0.003 arcsec in an astrometric coordinate system. This scheme not only makes submillimeter interferometric image reconstruction possible but should also have numerous other applications.

Kuiper, T. B. H.↗

Non-Aqueous Electrochemical Fluorination of Used Nuclear Fuel as an Advanced Separation Process

Development of efficient and environmentally benign methods to reprocess used nuclear fuel (UNF) will enable technologies for a nuclear renaissance. Electrochemical and fluorination methods for reprocessing UNF have been proposed, but combinations of electrochemical and fluorination methods have not been investigated. Electrochemical fluorination may reduce waste volumes compared to the main large-scale aqueous methods for processing used nuclear fuel. A non-aqueous electrochemical fluorination reprocessing method has been developed and demonstrated that enables gas phase uranium recovery while allowing for potential control of the reaction using a single process. Thermodynamic modeling showed a galvanic reaction between UNF and a fluorinating agent, such as NF 3 , in a molten fluoride electrolyte was possible and could selectively fluorinate U to UF 6 . To verify the model results, a reactor system for electrochemical fluorination was constructed along with vessels for product collection and analysis. Initial trials of the electrochemical reaction were performed and characterized by several electrochemical methods. The electrochemical oxidation of U using NF 3 as an oxidizing agent was demonstrated and UF 6 as a reaction product was detected.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Fabrication and Scale-Up of Porous Polybenzimidazole (PBI) Supports for Gas Separation Composite Membranes

Industrial gas separation often uses thin film composite (TFC) membranes comprising a porous support overlaid with a single-/multi-layer gas-selective thin film. An optimal porous support should possess high surface porosity to minimize gas transport resistance and nano-sized pores to ease pore penetration occurring during the thin film coating process. Good chemical and thermal stabilities are essential to withstand the aggressive solvents and heat required for the thin film coating and curing. However, few porous membranes satisfy all these requirements. This study presents a scalable membrane formation method of making highly porous polybenzimidazole (PBI) supports via non-solvent induced phase separation. This presentation also details the scale-up fabrication of PBI supports using a custom roll-to-roll membrane casting machine.

gas separation↗

Rapid determination of 210 Po in water samples

A new rapid method for the determination of 210 Po in water samples has been developed at the Savannah River National Laboratory (SRNL) that can be used for emergency response or routine water analyses. If a radiological dispersive device (RDD) event or a radiological attack associated with drinking water supplies occurs, there will be an urgent need for rapid analyses of water samples, including drinking water, ground water and other water effluents. Current analytical methods for the assay of 210 Po in water samples have typically involved spontaneous auto-deposition of 210 Po onto silver or other metal disks followed by counting by alpha spectrometry. The auto-deposition times range from 90 minutes to 24 hours or more, at times with yields that may be less than desirable. If sample interferences are present, decreased yields and degraded alpha spectrums can occur due to unpredictable thickening in the deposited layer. Separation methods have focused on the use of Sr Resin, often in combination with 210 Pb analysis. A new rapid method for 210 Po in water samples has been developed at the Savannah River National Laboratory (SRNL) that utilizes a rapid calcium phosphate co-precipitation method, separation using DGA Resin (N,N,N,N-tetraoctyldiglycolamide extractant-coated resin, Eichrom Technologies or Triskem-International), followed by rapid microprecipitation of 210 Po using bismuth phosphate for counting by alpha spectrometry. This new method can be performed quickly with excellent removal of interferences, high chemical yields and very good alpha peak resolution, eliminating any potential problems with the alpha source preparation for emergency or routine samples. A rapid sequential separation method to separate 210 Po and actinide isotopes was also developed. This new approach, rapid separation with DGA Resin plus microprecipitation for alpha source preparation, is a significant advance in radiochemistry for the rapid determination of 210 Po.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Separation and processing of plastic films

A successful flexible plastic packaging (FPP) recycling process will require the best of technological development, conscientious industry strategy, an environmentally aware community and likely, governmental support and legislation. FPP is used in almost every industry and can have a wide range of physical and chemical characteristics that lead to the series of challenges encountered at current recycling facilities. FPP is typically a one-time use product, and makes up about 30% of municipal waste plastics (Davis, 2016). Due to its versatility and light weight nature, plastics are the second most commonly used packaging material next to corrugated board (WPO, 2008). Furthermore, FPP and glass are the most detrimental of recyclables to the success of recycling processes. While glass is known to jam conveyors and melt in some separations at recovery facilities, FPP is far more burdensome and challenges the separation processes at recycling facilities. In the U.S. over 250 M tons of solid trash is generated each year, about 32 M tons consisting of plastic (Sandford, 2016; EPA, 2015b). 8.7 M tons of FPP was produced in 2013 in the U.S. (Sandford, 2016) with only 7.5% of FPP being recycled currently (EPA, 2015a). Of the material that is being recycled, 83% originated from commercial sources with 51% of it being clear polyethylene (PE) stretch wrap and poly bags, 20% consisting of mixed color PE stretch wrap films and 12% PE agricultural films (Moore Recycling Associates, 2017). Of the remaining recycled films, 16% originated from consumer sources as PE retail bags, sacks and wraps collected at store and consumer drop off centers. Only 1% of recycled PE films were obtained from curbside recycling programs and processed through material recovery facilities (MRFs). Other types of films such as polyvinyl chloride (PVC) and polypropylene (PP) are essentially not recycled. Only 43% of the recycled FPP is truly recycled back into films/sheets, 44% is down-gauged into plastic composite lumber and the remaining material goes to uses such as marine and agricultural products, crates, buckets and pallets (Moore Recycling associations, 2017).

99 GENERAL AND MISCELLANEOUS↗

Middle Kittanning Coal Waste and Underclay as an Alternative Rare Earth Elements Feedstock

In order to secure domestic sources of rare earth elements (REE) from coal related materials, there must be validation of representative feedstocks. Actively producing coal mines that target the Middle Kittanning coal seam in the Appalachian Basin were compiled. These mines were cross-referenced with publicly available geochemical data such as the U.S. Geological Survey (USGS) Earth Mapping Resources Initiative geochemical data along with samples evaluated and characterized by the National Energy Technology Laboratory (NETL). This work evaluated the extent of elevated Middle Kittanning underclay concentrations of REE in comparison to other underclay formations. Therefore, further up-scaling of research associated with the separation and extraction of REE and other critical minerals can be beneficial to utilizing domestic REE supplies for various technology sectors, to include energy, biomedical, and defense. Numerous current active mines targeting the Middle Kittanning coal seam represent a geographically significant opportunity for shared feedstocks and collaborations to further understand the role of Middle Kittanning underclay as a critical mineral feedstock.

01 COAL, LIGNITE, AND PEAT↗

A Rapid Sequential Separation Method for Determination of Actinides and TENORM in Fracking Wastes - 20223

With recent advances in unconventional drilling technology in the US and around the world, the risks of environmental contamination and exposure due to technologically enhanced naturally occurring radioactive materials (TENORM) from fracking wastes have also surfaced. Although the Permian Basin (southeastern New Mexico, western Texas) has long been a modest producer of oil, the advent of fracking technology a decade ago turned it into hot property for producers. A 2018 assessment of undiscovered, technically recoverable continuous oil and gas resources by the U.S. Geological Survey estimates an average 46.3 billion barrels of oil and 281 trillion cubic feet of gas. This is likely to increase the use of unconventional drilling and TENORM generation. TENORM concentrations in oil and gas exploration and production waste can be several hundred to several thousand times higher than background TENORM concentrations. Both the thorium and uranium decay chains contribute to airborne radionuclides arising from the radon gas escaping the ground and subsequently decaying as airborne particulates. Additionally, radon decay products {sup 210}Pb and {sup 210}Po can build up in scale on the internal surfaces of oil and gas handling pipes and in sludge in refineries, becoming potential inhalation and ingestion hazards for workers. Furthermore, southeastern NM is also home to world's only licensed and operating transuranic nuclear waste repository, the DoE's Waste Isolation Pilot Plant (WIPP). Plutonium isotopes ({sup 239+240}Pu) and {sup 241}Am, are expected to account for more than 99% of the total radioactivity scheduled for disposal in the WIPP repository. Thus, an improved understanding of the environmental fate and transport of TENORM, liberated by unconventional drilling, is essential to assess how best to protect individuals and the environment. In this context, accurate measurement of TENORM and actinides in environmental and biological samples is essential. In this presentation, a new sequential method for the separation and pre-concentration of actinides (Pu, Am, Np) and TENORM (Po, U and Th) derived from oil and gas exploration is proposed. The TEVA method involves a rapid co-precipitation step to remove matrix interferences from the samples, followed by plutonium oxidation state adjustment to Pu (IV) and an incubation period of ∼ 1 hour at 50-60 deg. C to allow the resultant Po (II) to oxidize into Po(IV). The polonium, neptunium, thorium and plutonium are then separated on a TEVA column, while americium and uranium are separated on a TRU column. After separation, the alpha counting source was prepared by micro-precipitation with copper sulfide (CuS) for polonium and neodymium fluoride (NdF{sub 3}) for actinides. The efficiency and reliability of the procedures were tested by analyzing filter, drinking water and frack sand samples. The method is simple, robust and can be performed quickly with excellent removal of interferences, high chemical recovery and very good alpha peak resolution. (authors)

07 ISOTOPE AND RADIATION SOURCES↗

An overview of the Energy Modeling Forum 33rd study: Assessing large-scale global bioenergy deployment for managing climate change

Previous studies have projected a significant role for bioenergy in decarbonizing the global economy and helping realize international climate goals such as limiting global average warming to 2°C or 1.5°C. However, with significant variability in bioenergy results and significant concerns about potential environmental and social implications, greater transparency and dedicated assessment of the underlying modeling and results and more detailed understanding of the potential role of bioenergy are needed. Stanford University’s Energy Modeling Forum (EMF) initiated a 33rd study (EMF-33) to explore the viability of large-scale bioenergy as part of a comprehensive climate management strategy. This special issue presents the papers of the EMF-33 study—a multi-year inter-model comparison project designed to understand and assess global, long-run, biomass supply and bioenergy deployment potentials and related uncertainties. Using a novel scenario design with independent biomass supply and bioenergy demand protocols, EMF-33 separately elucidates and explores the modeling of biomass feedstock supplies and bioenergy technologies and their deployment—revealing, comparing, and assessing the modeling that is suggesting that bioenergy could be a key climate containment strategy. This introduction provides an overview of the EMF-33 study design and the overview, thematic, and individual modeling team papers and types of insights that make up this special issue. By providing enhanced transparency and new detailed insights, we hope to inform policy dialogue about the potential role of bioenergy and facilitate new research.

Rose, Steven K.↗

Enhancement of a Process Flowsheet for Recovering and Concentrating Critical Materials from Bituminous Coal Sources

Recovery of rare earth elements (REE) from coal-related resources has recently received significant interest due to supply concerns and their key roles in critical industries and defense-related technologies. In this study, an integrated flowsheet consisting of sorting, crushing/grinding, physical separation, acid leaching, solvent extraction, and selective precipitation was designed to achieve continuous production of rare earth products from various coal-related resources such as coarse refuse and acid mine drainage. A pilot plant was constructed that enabled continuous testing of the circuitry on a range of different coal-based feedstocks. Despite achieving significant success in producing high-grade rare earth oxide products, low REE recovery values and high operational costs necessitated a re-evaluation of the process flowsheet. This article describes the circuitry improvements that were based on both laboratory and pilot plant test results. Roasting as a pre-leach treatment was found to significantly improve the leaching rate and overall REE recovery values. After roasting West Kentucky No. 13 and Fire Clay coal refuse materials at 600 °C, REE recovery increased by 60 and 40 absolute percentage points, respectively. Rare earth concentration in the pregnant leachate solution (PLS) was increased to around 700 ppm prior to solvent extraction using a staged precipitation method. REEs in the precipitate were re-dissolved, purified, and extracted from the PLS using solvent extraction and selective precipitation to values of around 80%. As a result of the improvements, chemical consumption in the acid leaching and solvent extraction processes was significantly reduced. A techno-economical assessment of the improved flowsheet indicated significant commercialization potential.

01 COAL, LIGNITE, AND PEAT↗